- 11 Nov, 2011 3 commits
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Amitkumar Karwar authored
Firmware expects 'max_ssid_length' field in 'struct mwifiex_ie_types_wildcard_ssid_params' to be '0' for performing SSID specific scan. Currently driver updates it with an actual SSID length. Hence UUT is not able to find the AP configured in hidden SSID mode in scan results and association fails. max_ssid_length is filled with '0' to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
When HW RF kill switch is set to kill the radio, our NIC issues an interrupt after we stop the APM module. When we unload the module, the driver disables and cleans the interrupts before stopping the APM. So we have a real interrupt (inta not zero) pending. When this interrupts pops up the tasklet has already been killed and we crash. Here is a logical description of the flow: disable and clean interrupts synchronize interrupts kill the tasklet stop the APM <<== creates an RF kill interrupt free_irq <<== somehow our ISR is called here and we crash Here is the panic message: [ 201.313636] BUG: unable to handle kernel paging request at ffff8800911b7150 [ 201.314541] IP: [<ffffffff8106d652>] tasklet_action+0x62/0x130 [ 201.315149] PGD 1c06063 PUD db37f067 PMD db408067 PTE 80000000911b7160 [ 201.316456] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 201.317324] CPU 1 [ 201.317495] Modules linked in: arc4 iwlwifi(-) mac80211 cfg80211 netconsole configfs binfmt_misc i915 drm_kms_helper drm uvcvideo i2c_algo_bit videodev dell_laptop dcdbas intel_agp dell_wmi intel_ips psmouse intel_gtt v4l2_compat_ioctl32 asix usbnet mii serio_raw video sparse_keymap firewire_ohci sdhci_pci sdhci firewire_core e1000e crc_itu_t [last unloaded: configfs] [ 201.323839] [ 201.324015] Pid: 2061, comm: modprobe Not tainted 3.1.0-rc9-wl #4 Dell Inc. Latitude E6410/0667CC [ 201.324736] RIP: 0010:[<ffffffff8106d652>] [<ffffffff8106d652>] tasklet_action+0x62/0x130 [ 201.325128] RSP: 0018:ffff88011bc43ea0 EFLAGS: 00010286 [ 201.325338] RAX: ffff88008ae70000 RBX: ffff8800911b7150 RCX: ffff88008ae70028 [ 201.325555] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88008ae70000 [ 201.325775] RBP: ffff88011bc43ec0 R08: 0000000000000000 R09: 0000000000000000 [ 201.325994] R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000001 [ 201.326212] R13: 0000000000000006 R14: 0000000000000100 R15: ffff88008e259fd8 [ 201.326431] FS: 00007f4b90ea9700(0000) GS:ffff88011bc40000(0000) knlGS:0000000000000000 [ 201.326657] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 201.326864] CR2: ffff8800911b7150 CR3: 000000008fd6d000 CR4: 00000000000006e0 [ 201.327083] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 201.327302] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 201.327521] Process modprobe (pid: 2061, threadinfo ffff88008e258000, task ffff88008ae70000) [ 201.327747] Stack: [ 201.330494] 0000000000000046 0000000000000030 0000000000000001 0000000000000006 [ 201.333870] ffff88011bc43f30 ffffffff8106cd8a ffffffff811e1016 ffff88011bc43f08 [ 201.337186] 0000000100000046 ffff88008e259fd8 0000000a10be2160 0000000000000006 [ 201.340458] Call Trace: [ 201.342994] <IRQ> [ 201.345656] [<ffffffff8106cd8a>] __do_softirq+0xca/0x250 [ 201.348185] [<ffffffff811e1016>] ? pde_put+0x76/0x90 [ 201.350730] [<ffffffff8131aeae>] ? do_raw_spin_unlock+0x5e/0xb0 [ 201.353261] [<ffffffff811e1016>] ? pde_put+0x76/0x90 [ 201.355776] [<ffffffff8163ccfc>] call_softirq+0x1c/0x30 [ 201.358287] [<ffffffff8101531d>] do_softirq+0x9d/0xd0 [ 201.360823] [<ffffffff8106cb05>] irq_exit+0xd5/0xf0 [ 201.363330] [<ffffffff8163d5d6>] do_IRQ+0x66/0xe0 [ 201.365819] [<ffffffff81632673>] common_interrupt+0x73/0x73 [ 201.368257] <EOI> Cc: <stable@kernel.org> 3.1+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 10 Nov, 2011 1 commit
-
-
David S. Miller authored
Change them over to plain "ETHERNET" Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 Nov, 2011 13 commits
-
-
Li Wei authored
When opt->srr_is_hit is set skb_rtable(skb) has been updated for 'nexthop' and iph->daddr should always equals to skb_rtable->rt_dst holds, We need update iph->daddr either. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nick Bowler authored
The AH4/6 ahash input callbacks read out the nexthdr field from the AH header *after* they overwrite that header. This is obviously not going to end well. Fix it up. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nick Bowler authored
The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume instead of the error code. This appears to be a copy+paste error from the input case, where nexthdr is expected. This causes the driver to continuously add AH headers to the datagram until either an allocation fails and the packet is dropped or the ahash driver hits a synchronous fallback and the resulting monstrosity is transmitted. Correct this issue by simply passing the error code unadulterated. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Bolle authored
Commit ff5a3b50 ("hippi: Move the HIPPI driver") moved the HIPPI driver into drivers/net/hippi. It didn't source drivers/net/hippi/Kconfig though, so it didn't make all necessary Kconfig changes. So let drivers/net/kconfig source HIPPI's Kconfig file. [ Fix syntax error at the end of HIPP's Kconfig file. -DaveM ] Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ricardo Ribalda authored
While tracing down a connectivity problem on the temac I connected a probe to the Cross bar irq, and it was triggered when doing ifdown->ifup. This is fixed once waiting for the indirect write to end. Since it is not on the hot path there is no performance loss. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ricardo Ribalda authored
Do not enable the irq until the scatter gather registers are ready to handle the data. Otherwise an irq from a packet send/received before last close can lead to an access to an invalid memory region on the irq handler. Also, stop the dma engine on close. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
When the connection monitor timer fires right before suspend, the following will happen: timer fires -> monitor_work gets queued suspend calls ieee80211_sta_quiesce ieee80211_sta_quiesce: - deletes timer - cancels monitor_work synchronously, running it [note wrong order of these steps] monitor_work runs, re-arming the timer later, timer fires while system should be quiesced This causes a warning: WARNING: at net/mac80211/util.c:540 ieee80211_can_queue_work+0x35/0x40 [mac80211]() but is otherwise harmless. I'm not completely sure this is the scenario Thomas stumbled across, but it is the only way I can right now see the warning in a scenario like the one he reported. Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Steven Miao authored
use get_unaligned_le64() to get timestamp Signed-off-by: Steven Miao <realmz6@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Commit 4d9d88d1 by Scott James Remnant <keybuk@google.com> added the .uevent() callback for the regulatory device used during the platform device registration. The change was done to account for queuing up udev change requests through udevadm triggers. The change also meant that upon regulatory core exit we will now send a uevent() but the uevent() callback, reg_device_uevent(), also accessed last_request. Right before commiting device suicide we free'd last_request but never set it to NULL so platform_device_unregister() would lead to bogus kernel paging request. Fix this and also simply supress uevents right before we commit suicide as they are pointless. This fix is required for kernels >= v2.6.39 $ git describe --contains 4d9d88d1 v2.6.39-rc1~468^2~25^2^2~21 The impact of not having this present is that a bogus paging access may occur (only read) upon cfg80211 unload time. You may also get this BUG complaint below. Although Johannes could not reproduce the issue this fix is theoretically correct. mac80211_hwsim: unregister radios mac80211_hwsim: closing netlink BUG: unable to handle kernel paging request at ffff88001a06b5ab IP: [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: cfg80211(-) [last unloaded: mac80211] Pid: 2279, comm: rmmod Tainted: G W 3.1.0-wl+ #663 Bochs Bochs RIP: 0010:[<ffffffffa030df9a>] [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP: 0000:ffff88001c5f9d58 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0 RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0 R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001 FS: 00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780) Stack: ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189 Call Trace: [<ffffffff812ff7e5>] dev_uevent+0xc5/0x170 [<ffffffff81241dc7>] kobject_uevent_env+0x1f7/0x490 [<ffffffff81040189>] ? sub_preempt_count+0x29/0x60 [<ffffffff814cab1a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [<ffffffff81305307>] ? devres_release_all+0x27/0x60 [<ffffffff8124206b>] kobject_uevent+0xb/0x10 [<ffffffff812fee27>] device_del+0x157/0x1b0 [<ffffffff8130377d>] platform_device_del+0x1d/0x90 [<ffffffff81303b76>] platform_device_unregister+0x16/0x30 [<ffffffffa030fffd>] regulatory_exit+0x5d/0x180 [cfg80211] [<ffffffffa032bec3>] cfg80211_exit+0x2b/0x45 [cfg80211] [<ffffffff8109a84c>] sys_delete_module+0x16c/0x220 [<ffffffff8108a23e>] ? trace_hardirqs_on_caller+0x7e/0x120 [<ffffffff814cba02>] system_call_fastpath+0x16/0x1b Code: <all your base are belong to me> RIP [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP <ffff88001c5f9d58> CR2: ffff88001a06b5ab ---[ end trace 147c5099a411e8c0 ]--- Reported-by: Johannes Berg <johannes@sipsolutions.net> Cc: Scott James Remnant <keybuk@google.com> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
ieee80211_probereq_get() can return NULL in which case we should clean up & return NULL in ieee80211_build_probe_req() as well. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When receiving failed PLCP frames is enabled, there won't be a rate pointer when we add the radiotap header and thus the kernel will crash. Fix this by not assuming the rate pointer is always valid. It's still always valid for frames that have good PLCP though, and that is checked & enforced. This was broken by my commit fc885189 Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Jul 30 13:23:12 2010 +0200 mac80211: don't check rates on PLCP error frames where I removed the check in this case but didn't take into account that the rate info would be used. Reported-by: Xiaokang Qin <xiaokang.qin@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Merge branch 'master' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
- 08 Nov, 2011 15 commits
-
-
Eyal Shapira authored
A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira <eyal@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Two new struct members were not documented, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Steffen Klassert authored
As we update the learned pmtu informations on demand, we might report a nagative expiration time value to userspace if the pmtu informations are already expired and we have not send a packet to that inetpeer after expiration. With this patch we send a expire time of null to userspace after expiration until the next packet is send to that inetpeer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Small fix in Documentation, since min_pmtu is 512 + 20 + 20 = 552 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Feng King authored
TCP_NODELAY is weaker than TCP_CORK, when TCP_CORK was set, small segments will always pass Nagle test regardless of TCP_NODELAY option. Signed-off-by: Feng King <kinwin2008@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
oftedal authored
To prevent the SBus driver for Sun Happy Meal cards from being loaded for PCI cards utilizing the same chipset, a filter was added to the probe function in commit 0b492fce. The filter was implemented by checking the name of the parent node in the OF tree. This patch extends this filter, so that the driver will load on SBus systems that are based upon SBI SBus Bridges. Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nico Erfurth authored
The driver used NET_IP_ALIGN to remove some additional padding inside of the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2 which removed the correct amount of bytes. On MCORE2-machines commit ea812ca1 introduces a change which sets NET_IP_ALIGN to 0 by default. Which triggered the bug on these machines. This fix introduces a new RXW_PADDING define and uses this instead of NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which is provided by SMSC. Signed-off-by: Nico Erfurth <ne@erfurth.eu> Tested-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brian Haley authored
RFC 4291 Section 2.7 says Multicast addresses must not be used as source addresses in IPv6 packets - drop them on input so we don't process the packet further. Signed-off-by: Brian Haley <brian.haley@hp.com> Reported-and-Tested-by: Kumar Sanghvi <divinekumar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wen-chien Jesse Sung authored
Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Linus Torvalds authored
.. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omapLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
-
- 07 Nov, 2011 8 commits
-
-
Al Viro authored
Mountpoint crossing is similar to following procfs symlinks - we do not get ->d_revalidate() called for dentry we have arrived at, with unpleasant consequences for NFS4. Simple way to reproduce the problem in mainline: cat >/tmp/a.c <<'EOF' #include <unistd.h> #include <fcntl.h> #include <stdio.h> main() { struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1}; if (fcntl(0, F_SETLK, &fl)) perror("setlk"); } EOF cc /tmp/a.c -o /tmp/test then on nfs4: mount --bind file1 file2 /tmp/test < file1 # ok /tmp/test < file2 # spews "setlk: No locks available"... What happens is the missing call of ->d_revalidate() after mountpoint crossing and that's where NFS4 would issue OPEN request to server. The fix is simple - treat mountpoint crossing the same way we deal with following procfs-style symlinks. I.e. set LOOKUP_JUMPED... Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix live annotation in the --stdio interface perf top tui: Don't recalc column widths considering just the first page perf report: Add progress bar when processing time ordered events perf hists browser: Warn about lost events perf tools: Fix a typo of command name as trace-cmd perf hists: Fix recalculation of total_period when sorting entries perf header: Fix build on old systems perf ui browser: Handle K_RESIZE in dialog windows perf ui browser: No need to switch char sets that often perf hists browser: Use K_TIMER perf ui: Rename ui__warning_paranoid to ui__error_paranoid perf ui: Reimplement the popup windows using libslang perf ui: Reimplement ui__popup_menu using ui__browser perf ui: Reimplement ui_helpline using libslang perf ui: Improve handling sigwinch a bit perf ui progress: Reimplement using slang perf evlist: Fix grouping of multiple events
-
Tony Lindgren authored
-
Tony Lindgren authored
Commit 32aaeffb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Axel Lin authored
Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Andrzej Kaczmarek authored
Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-