- 03 Jun, 2013 1 commit
-
-
Philipp Zabel authored
GAMMA_OFFSET is different between CodaDx6 and CODA7. Also, this is a bitfield. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 May, 2013 25 commits
-
-
Lad, Prabhakar authored
This patch removes check for EPERM in dbg_g/s_register and vidioc_g/s_register as this check is already performed by core. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Lad, Prabhakar authored
This patch removes check for EPERM in vidioc_g/s_register as this check is already performed by core. Signed-off-by:
-
Lad, Prabhakar authored
This patch removes check for EPERM in dbg_g/s_register as this check is already performed by core. Signed-off-by:
-
Lad, Prabhakar authored
This patch removes check for EPERM in dbg_g/s_register of subdevice drivers as this check is already performed by core. Signed-off-by:
-
Philipp Zabel authored
The timeout delayed work might be scheduled even after the v4l2 device is released. Signed-off-by:
-
Philipp Zabel authored
Use ret from the outer scope, instead of redefining it in the conditional clause. That way the error value reaches the end of the function as intended. Signed-off-by:
-
Philipp Zabel authored
Otherwise module/coda/parameters/coda_debug won't show up in sysfs. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Hans Verkuil authored
bw-qcam didn't set the timestamp and it didn't set q->timestamp_type. Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Lad, Prabhakar authored
This patch rearranges the description of field members of struct tvp7002_config. Also as the all the fields where accepting a value either 0/1, made the members as bool. Signed-off-by:
-
Lad, Prabhakar authored
this patch removes duplicate #define TVP7002_MODULE_NAME form the driver file, which was also defined in media/tvp7002.h Signed-off-by:
-
Leonid Kegulskiy authored
[mchehab@redhat.com: CodingStyle fixes] Signed-off-by:
Leonid Kegulskiy <leo@lumanate.com> Signed-off-by:
-
Lad, Prabhakar authored
This patch fixes several typos in videodev2.h file Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jean Delvare authored
Module parameter descriptions need not be terminated with a newline. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Wei Yongjun authored
The orig code will release all the resources if v4l2_device_register() failed and return 0. But what we need in this case is to return an negative error code to let the caller known we are failed. So the patch save the return value of v4l2_device_register() to 'ret' and return it when error. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
-
Wei Yongjun authored
Fix to return -ENODEV in the subdevice register error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
-
Wei Yongjun authored
Fix to return -ENODEV in the subdevice register error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
-
Wei Yongjun authored
Fix to return -EINVAL in the get kernel address error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Randy Dunlap authored
Fix hdpvr build errors when CONFIG_I2C=m and VIDEO_V4L2=m and VIDEO_HDPVR=y. drivers/built-in.o: In function `hdpvr_disconnect': hdpvr-core.c:(.text+0xef542): undefined reference to `v4l2_device_disconnect' hdpvr-core.c:(.text+0xef57e): undefined reference to `i2c_del_adapter' hdpvr-core.c:(.text+0xef58a): undefined reference to `video_unregister_device' drivers/built-in.o: In function `hdpvr_delete': (.text+0xef5b9): undefined reference to `video_device_release' drivers/built-in.o: In function `hdpvr_probe': hdpvr-core.c:(.text+0xef63a): undefined reference to `v4l2_device_register' hdpvr-core.c:(.text+0xefd97): undefined reference to `i2c_del_adapter' drivers/built-in.o: In function `hdpvr_s_ctrl': hdpvr-video.c:(.text+0xf03c0): undefined reference to `v4l2_ctrl_activate' drivers/built-in.o: In function `hdpvr_device_release': hdpvr-video.c:(.text+0xf0470): undefined reference to `v4l2_device_unregister' hdpvr-video.c:(.text+0xf0479): undefined reference to `v4l2_ctrl_handler_free' hdpvr-video.c:(.text+0xf048f): undefined reference to `i2c_del_adapter' drivers/built-in.o: In function `hdpvr_open': hdpvr-video.c:(.text+0xf0570): undefined reference to `video_devdata' hdpvr-video.c:(.text+0xf057b): undefined reference to `v4l2_fh_init' hdpvr-video.c:(.text+0xf0583): undefined reference to `v4l2_fh_add' drivers/built-in.o: In function `video_drvdata': hdpvr-video.c:(.text+0xf08a0): undefined reference to `video_devdata' drivers/built-in.o: In function `vidioc_s_dv_timings': hdpvr-video.c:(.text+0xf0d34): undefined reference to `v4l_match_dv_timings' drivers/built-in.o: In function `hdpvr_poll': hdpvr-video.c:(.text+0xf1455): undefined reference to `v4l2_ctrl_poll' drivers/built-in.o: In function `hdpvr_release': hdpvr-video.c:(.text+0xf18f6): undefined reference to `v4l2_fh_release' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1be3): undefined reference to `v4l2_ctrl_handler_init_class' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1c19): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1c42): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1c6b): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1cac): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1cd5): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o:(.text+0xf1cfe): more undefined references to `v4l2_ctrl_new_std' follow drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1d75): undefined reference to `v4l2_ctrl_new_std_menu' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1d9e): undefined reference to `v4l2_ctrl_new_std_menu' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1dc3): undefined reference to `v4l2_ctrl_new_std_menu' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1de5): undefined reference to `v4l2_ctrl_new_std_menu' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1e18): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1e4b): undefined reference to `v4l2_ctrl_new_std' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1e90): undefined reference to `v4l2_ctrl_cluster' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1e98): undefined reference to `v4l2_ctrl_handler_setup' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1ec1): undefined reference to `video_device_alloc' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1f85): undefined reference to `__video_register_device' drivers/built-in.o: In function `hdpvr_register_videodev': (.text+0xf1fac): undefined reference to `v4l2_ctrl_handler_free' drivers/built-in.o: In function `hdpvr_register_ir_tx_i2c': (.text+0xf238f): undefined reference to `i2c_new_device' drivers/built-in.o: In function `hdpvr_register_ir_rx_i2c': (.text+0xf2434): undefined reference to `i2c_new_device' drivers/built-in.o: In function `hdpvr_register_i2c_adapter': (.text+0xf2514): undefined reference to `i2c_add_adapter' drivers/built-in.o:(.rodata+0x1b368): undefined reference to `video_ioctl2' drivers/built-in.o:(.rodata+0x1b690): undefined reference to `v4l2_ctrl_log_status' drivers/built-in.o:(.rodata+0x1b6f8): undefined reference to `v4l2_ctrl_subscribe_event' drivers/built-in.o:(.rodata+0x1b700): undefined reference to `v4l2_event_unsubscribe' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 21 May, 2013 14 commits
-
-
Jakob Normark authored
Fix missing break that so that n_layers are not accidentally incorrect Kernel version: v3.10-rc1 Signed-off-by:
Jakob Normark <jakobnormark@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
At least on s390, gcc complains about that: drivers/media/i2c/saa7115.c: In function 'saa711x_detect_chip.constprop.2': drivers/media/i2c/saa7115.c:1647:1: warning: 'saa711x_detect_chip.constprop.2' uses dynamic stack allocation [enabled by default] While for me the above report seems utterly bogus, as the compiler should be optimizing saa711x_detect_chip, merging it with saa711x_detect_chip and changing: char chip_ver[size - 1]; to char chip_ver[16]; because this function is only called on this code snippet: char name[17]; ... ident = saa711x_detect_chip(client, id, name, sizeof(name)); It seems that gcc is not optimizing it, at least on s390. As getting rid of it is easy, let's do it. Reported-by:kbuild test robot <fengguang.wu@intel.com> Acked-by:
-
Mauro Carvalho Chehab authored
vm_iomap_memory() provides a better end user interface than remap_pfn_range(), as it does the needed tests before doing mmap. Signed-off-by: -
Roberto Alcântara authored
If firmware load fails, report it as an error. Signed-off-by:
Roberto Alcantara <roberto@eletronica.org> Signed-off-by:
-
Al Viro authored
just use videobuf_queue_lock(map->q) to protect map->count; vm_area_operations ->open() and ->close() are called just under vma->vm_mm->mmap_sem, which doesn't help the drivers at all, since clonal VMAs are normally in different address spaces... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Reinhard Nissl authored
As the enum values have changed recently, the comments are void. Signed-off-by:
Reinhard Nißl <rnissl@gmx.de> Signed-off-by:
-
Randy Dunlap authored
(a.k.a. Kconfig bool depending on a tristate considered harmful) Fix various build errors when CONFIG_USB=m and media USB drivers are builtin. In this case, CONFIG_USB_ZR364XX=y, CONFIG_VIDEO_PVRUSB2=y, and CONFIG_VIDEO_STK1160=y. This is caused by (from drivers/media/usb/Kconfig): menuconfig MEDIA_USB_SUPPORT bool "Media USB Adapters" depends on USB && MEDIA_SUPPORT =m =y so MEDIA_USB_SUPPORT=y and all following Kconfig 'source' lines are included. By adding an "if USB" guard around most of this file, the needed dependencies are enforced. drivers/built-in.o: In function `zr364xx_start_readpipe': zr364xx.c:(.text+0xc726a): undefined reference to `usb_alloc_urb' zr364xx.c:(.text+0xc72bb): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `zr364xx_stop_readpipe': zr364xx.c:(.text+0xc72fd): undefined reference to `usb_kill_urb' zr364xx.c:(.text+0xc7309): undefined reference to `usb_free_urb' drivers/built-in.o: In function `read_pipe_completion': zr364xx.c:(.text+0xc7acc): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `send_control_msg.constprop.12': zr364xx.c:(.text+0xc7d2f): undefined reference to `usb_control_msg' drivers/built-in.o: In function `pvr2_ctl_timeout': pvrusb2-hdw.c:(.text+0xcadb6): undefined reference to `usb_unlink_urb' pvrusb2-hdw.c:(.text+0xcadcb): undefined reference to `usb_unlink_urb' drivers/built-in.o: In function `pvr2_hdw_create': (.text+0xcc42c): undefined reference to `usb_alloc_urb' drivers/built-in.o: In function `pvr2_hdw_create': (.text+0xcc448): undefined reference to `usb_alloc_urb' drivers/built-in.o: In function `pvr2_hdw_create': (.text+0xcc5f9): undefined reference to `usb_set_interface' drivers/built-in.o: In function `pvr2_hdw_create': (.text+0xcc65a): undefined reference to `usb_free_urb' drivers/built-in.o: In function `pvr2_hdw_create': (.text+0xcc666): undefined reference to `usb_free_urb' drivers/built-in.o: In function `pvr2_send_request_ex.part.22': pvrusb2-hdw.c:(.text+0xccbe3): undefined reference to `usb_submit_urb' pvrusb2-hdw.c:(.text+0xccc83): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `pvr2_hdw_remove_usb_stuff.part.25': pvrusb2-hdw.c:(.text+0xcd3f9): undefined reference to `usb_kill_urb' pvrusb2-hdw.c:(.text+0xcd405): undefined reference to `usb_free_urb' pvrusb2-hdw.c:(.text+0xcd421): undefined reference to `usb_kill_urb' pvrusb2-hdw.c:(.text+0xcd42d): undefined reference to `usb_free_urb' drivers/built-in.o: In function `pvr2_hdw_device_reset': (.text+0xcd658): undefined reference to `usb_lock_device_for_reset' drivers/built-in.o: In function `pvr2_hdw_device_reset': (.text+0xcd664): undefined reference to `usb_reset_device' drivers/built-in.o: In function `pvr2_hdw_cpureset_assert': (.text+0xcd6f9): undefined reference to `usb_control_msg' drivers/built-in.o: In function `pvr2_hdw_cpufw_set_enabled': (.text+0xcd84e): undefined reference to `usb_control_msg' drivers/built-in.o: In function `pvr2_upload_firmware1': pvrusb2-hdw.c:(.text+0xcda47): undefined reference to `usb_clear_halt' pvrusb2-hdw.c:(.text+0xcdb04): undefined reference to `usb_control_msg' drivers/built-in.o: In function `pvr2_upload_firmware2': (.text+0xce7dc): undefined reference to `usb_bulk_msg' drivers/built-in.o: In function `pvr2_stream_buffer_count': pvrusb2-io.c:(.text+0xd2e05): undefined reference to `usb_alloc_urb' pvrusb2-io.c:(.text+0xd2e5b): undefined reference to `usb_kill_urb' pvrusb2-io.c:(.text+0xd2e9f): undefined reference to `usb_free_urb' drivers/built-in.o: In function `pvr2_stream_internal_flush': pvrusb2-io.c:(.text+0xd2f9b): undefined reference to `usb_kill_urb' drivers/built-in.o: In function `pvr2_buffer_queue': (.text+0xd3328): undefined reference to `usb_kill_urb' drivers/built-in.o: In function `pvr2_buffer_queue': (.text+0xd33ea): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `stk1160_read_reg': (.text+0xd3efa): undefined reference to `usb_control_msg' drivers/built-in.o: In function `stk1160_write_reg': (.text+0xd3f4f): undefined reference to `usb_control_msg' drivers/built-in.o: In function `stop_streaming': stk1160-v4l.c:(.text+0xd4997): undefined reference to `usb_set_interface' drivers/built-in.o: In function `start_streaming': stk1160-v4l.c:(.text+0xd4a9f): undefined reference to `usb_set_interface' stk1160-v4l.c:(.text+0xd4afa): undefined reference to `usb_submit_urb' stk1160-v4l.c:(.text+0xd4ba3): undefined reference to `usb_set_interface' drivers/built-in.o: In function `stk1160_isoc_irq': stk1160-video.c:(.text+0xd509b): undefined reference to `usb_submit_urb' drivers/built-in.o: In function `stk1160_cancel_isoc': (.text+0xd50ef): undefined reference to `usb_kill_urb' drivers/built-in.o: In function `stk1160_free_isoc': (.text+0xd5155): undefined reference to `usb_free_coherent' drivers/built-in.o: In function `stk1160_free_isoc': (.text+0xd515d): undefined reference to `usb_free_urb' drivers/built-in.o: In function `stk1160_alloc_isoc': (.text+0xd5278): undefined reference to `usb_alloc_urb' drivers/built-in.o: In function `stk1160_alloc_isoc': (.text+0xd52c2): undefined reference to `usb_alloc_coherent' drivers/built-in.o: In function `stk1160_alloc_isoc': (.text+0xd53c4): undefined reference to `usb_free_urb' drivers/built-in.o: In function `zr364xx_driver_init': zr364xx.c:(.init.text+0x463e): undefined reference to `usb_register_driver' drivers/built-in.o: In function `pvr_init': pvrusb2-main.c:(.init.text+0x4662): undefined reference to `usb_register_driver' drivers/built-in.o: In function `stk1160_usb_driver_init': stk1160-core.c:(.init.text+0x467d): undefined reference to `usb_register_driver' drivers/built-in.o: In function `zr364xx_driver_exit': zr364xx.c:(.exit.text+0x1377): undefined reference to `usb_deregister' drivers/built-in.o: In function `pvr_exit': pvrusb2-main.c:(.exit.text+0x1389): undefined reference to `usb_deregister' drivers/built-in.o: In function `stk1160_usb_driver_exit': stk1160-core.c:(.exit.text+0x13a0): undefined reference to `usb_deregister' Suggested-by:
"Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by:
-
Jon Arne Jørgensen authored
The gm7113c chip is similar to the original saa7113 chip, so I try to re-use most of the saa7113 specific setup-/configuration registers. According to the datasheet, the gm7113c chip has not implemented any register-addresses after 0x1f, so I add a new entry to for the chip to the saa711x_has_reg function. The devices I've seen using this chip will fail to get stable video-sync if these registers are not zeroed: R_14_ANAL_ADC_COMPAT_CNTL R_15_VGATE_START_FID_CHG R_16_VGATE_STOP R_17_MISC_VGATE_CONF_AND_MSB The saa711x_set_v4lstd is updated to send a simpler configuration-table to avoid setting these registers. Signed-off-by:
Jon Arne Jørgensen <jonarne@jonarne.no> Tested-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Adds a code that (auto)detects gm7113c clones. The auto-detection here is not perfect, as, on contrary to what it would be expected by looking into its datasheets some devices would return, instead: saa7115 0-0025: chip 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 @ 0x4a is unknown (found on a device labeled as GM7113C 1145 by Ezequiel Garcia) Signed-off-by:
-
Mauro Carvalho Chehab authored
As we're now seeing other variants from chinese clones, like gm1113c, we'll need to add more bits at the detection code. So, move it into a separate function. Signed-off-by:
-
Alexey Khoroshilov authored
copy_to_user() must not be called with spinlocks held, but it is in fmc_transfer_rds_from_internal_buff(). The patch copies data to tmpbuf, releases spinlock and then passes it to userspace. By the way there is a small unification: replace a couple of hardcoded constants by a macro. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Ismael Luceno authored
Instead of falling back to 1/25 (PAL) or 1/30 (NTSC). Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Lad, Prabhakar authored
This patch enables tvp7002 decoder driver for media controller based usage by adding v4l2_subdev_pad_ops operations support for enum_mbus_code, set_pad_format, get_pad_format and media_entity_init() on probe and media_entity_cleanup() on remove. Signed-off-by:
-
Leonid Kegulskiy authored
Signed-off-by:
-
