Add a missing ":" to fix a broken field list.
Signed-off-by: Takahiro Itazuri <itazur@amazon.com>
Fixes: ba7bb663 ("KVM: x86: Provide per VM capability for disabling PMU virtualization")
Message-Id: <20230331093116.99820-1-itazur@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When introduced, IRQFD resampling worked on POWER8 with XICS. However
KVM on POWER9 has never implemented it - the compatibility mode code
("XICS-on-XIVE") misses the kvm_notify_acked_irq() call and the native
XIVE mode does not handle INTx in KVM at all.

This moved the capability support advertising to platforms and stops
advertising it on XIVE, i.e. POWER9 and later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220504074807.3616813-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-master-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

A small fix that repairs the external loop detection code for PV
guests.

To determine whether the guest has caused an external interruption loop
upon code 20 (external interrupt) intercepts, the ext_new_psw needs to
be inspected to see whether external interrupts are enabled.

Under non-PV, ext_new_psw can simply be taken from guest lowcore. Under
PV, KVM can only access the encrypted guest lowcore and hence the
ext_new_psw must not be taken from guest lowcore.

handle_external_interrupt() incorrectly did that and hence was not able
to reliably tell whether an external interruption loop is happening or
not. False negatives cause spurious failures of my kvm-unit-test
for extint loops[1] under PV.

Since code 20 is only caused under PV if and only if the guest's
ext_new_psw is enabled for external interrupts, false positive detection
of a external interruption loop can not happen.

Fix this issue by instead looking at the guest PSW in the state
description. Since the PSW swap for external interrupt is done by the
ultravisor before the intercept is caused, this reliably tells whether
the guest is enabled for external interrupts in the ext_new_psw.

Also update the comments to explain better what is happening.

[1] https://lore.kernel.org/kvm/20220812062151.1980937-4-nrb@linux.ibm.com/Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: 201ae986 ("KVM: s390: protvirt: Implement interrupt injection")
Link: https://lore.kernel.org/r/20230213085520.100756-2-nrb@linux.ibm.com
Message-Id: <20230213085520.100756-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

Don't report an error code to L1 when synthesizing a nested VM-Exit and
L2 is in Real Mode.  Per Intel's SDM, regarding the error code valid bit:

  This bit is always 0 if the VM exit occurred while the logical processor
  was in real-address mode (CR0.PE=0).

The bug was introduced by a recent fix for AMD's Paged Real Mode, which
moved the error code suppression from the common "queue exception" path
to the "inject exception" path, but missed VMX's "synthesize VM-Exit"
path.

Fixes: b97f0745 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When injecting an exception into a vCPU in Real Mode, suppress the error
code by clearing the flag that tracks whether the error code is valid, not
by clearing the error code itself.  The "typo" was introduced by recent
fix for SVM's funky Paged Real Mode.

Opportunistically hoist the logic above the tracepoint so that the trace
is coherent with respect to what is actually injected (this was also the
behavior prior to the buggy commit).

Fixes: b97f0745 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Clear vcpu->mmio_needed when injecting an exception from the emulator to
squash a (legitimate) warning about vcpu->mmio_needed being true at the
start of KVM_RUN without a callback being registered to complete the
userspace MMIO exit.  Suppressing the MMIO write exit is inarguably wrong
from an architectural perspective, but it is the least awful hack-a-fix
due to shortcomings in KVM's uAPI, not to mention that KVM already
suppresses MMIO writes in this scenario.

Outside of REP string instructions, KVM doesn't provide a way to resume
an instruction at the exact point where it was "interrupted" if said
instruction partially completed before encountering an MMIO access.  For
MMIO reads, KVM immediately exits to userspace upon detecting MMIO as
userspace provides the to-be-read value in a buffer, and so KVM can safely
(more or less) restart the instruction from the beginning.  When the
emulator re-encounters the MMIO read, KVM will service the MMIO by getting
the value from the buffer instead of exiting to userspace, i.e. KVM won't
put the vCPU into an infinite loop.

On an emulated MMIO write, KVM finishes the instruction before exiting to
userspace, as exiting immediately would ultimately hang the vCPU due to
the aforementioned shortcoming of KVM not being able to resume emulation
in the middle of an instruction.

For the vast majority of _emulated_ instructions, deferring the userspace
exit doesn't cause problems as very few x86 instructions (again ignoring
string operations) generate multiple writes.  But for instructions that
generate multiple writes, e.g. PUSHA (multiple pushes onto the stack),
deferring the exit effectively results in only the final write triggering
an exit to userspace.  KVM does support multiple MMIO "fragments", but
only for page splits; if an instruction performs multiple distinct MMIO
writes, the number of fragments gets reset when the next MMIO write comes
along and any previous MMIO writes are dropped.

Circling back to the warning, if a deferred MMIO write coincides with an
exception, e.g. in this case a #SS due to PUSHA underflowing the stack
after queueing a write to an MMIO page on a previous push, KVM injects
the exceptions and leaves the deferred MMIO pending without registering a
callback, thus triggering the splat.

Sweep the problem under the proverbial rug as dropping MMIO writes is not
unique to the exception scenario (see above), i.e. instructions like PUSHA
are fundamentally broken with respect to MMIO, and have been since KVM's
inception.
Reported-by: zhangjianguo <zhangjianguo18@huawei.com>
Reported-by: syzbot+760a73552f47a8cd0fd9@syzkaller.appspotmail.com
Reported-by: syzbot+8accb43ddc6bd1f5713a@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322141220.2206241-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM irqfd based emulation of level-triggered interrupts doesn't work
quite correctly in some cases, particularly in the case of interrupts
that are handled in a Linux guest as oneshot interrupts (IRQF_ONESHOT).
Such an interrupt is acked to the device in its threaded irq handler,
i.e. later than it is acked to the interrupt controller (EOI at the end
of hardirq), not earlier.

Linux keeps such interrupt masked until its threaded handler finishes,
to prevent the EOI from re-asserting an unacknowledged interrupt.
However, with KVM + vfio (or whatever is listening on the resamplefd)
we always notify resamplefd at the EOI, so vfio prematurely unmasks the
host physical IRQ, thus a new physical interrupt is fired in the host.
This extra interrupt in the host is not a problem per se. The problem is
that it is unconditionally queued for injection into the guest, so the
guest sees an extra bogus interrupt. [*]

There are observed at least 2 user-visible issues caused by those
extra erroneous interrupts for a oneshot irq in the guest:

1. System suspend aborted due to a pending wakeup interrupt from
   ChromeOS EC (drivers/platform/chrome/cros_ec.c).
2. Annoying "invalid report id data" errors from ELAN0000 touchpad
   (drivers/input/mouse/elan_i2c_core.c), flooding the guest dmesg
   every time the touchpad is touched.

The core issue here is that by the time when the guest unmasks the IRQ,
the physical IRQ line is no longer asserted (since the guest has
acked the interrupt to the device in the meantime), yet we
unconditionally inject the interrupt queued into the guest by the
previous resampling. So to fix the issue, we need a way to detect that
the IRQ is no longer pending, and cancel the queued interrupt in this
case.

With IOAPIC we are not able to probe the physical IRQ line state
directly (at least not if the underlying physical interrupt controller
is an IOAPIC too), so in this patch we use irqfd resampler for that.
Namely, instead of injecting the queued interrupt, we just notify the
resampler that this interrupt is done. If the IRQ line is actually
already deasserted, we are done. If it is still asserted, a new
interrupt will be shortly triggered through irqfd and injected into the
guest.

In the case if there is no irqfd resampler registered for this IRQ, we
cannot fix the issue, so we keep the existing behavior: immediately
unconditionally inject the queued interrupt.

This patch fixes the issue for x86 IOAPIC only. In the long run, we can
fix it for other irqchips and other architectures too, possibly taking
advantage of reading the physical state of the IRQ line, which is
possible with some other irqchips (e.g. with arm64 GIC, maybe even with
the legacy x86 PIC).

[*] In this description we assume that the interrupt is a physical host
    interrupt forwarded to the guest e.g. by vfio. Potentially the same
    issue may occur also with a purely virtual interrupt from an
    emulated device, e.g. if the guest handles this interrupt, again, as
    a oneshot interrupt.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/kvm/31420943-8c5f-125c-a5ee-d2fde2700083@semihalf.com/
Link: https://lore.kernel.org/lkml/87o7wrug0w.wl-maz@kernel.org/
Message-Id: <20230322204344.50138-3-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It is useful to be able to do read-only traversal of the list of all the
registered irqfd resamplers without locking the resampler_lock mutex.
In particular, we are going to traverse it to search for a resampler
registered for the given irq of an irqchip, and that will be done with
an irqchip spinlock (ioapic->lock) held, so it is undesirable to lock a
mutex in this context. So turn this list into an RCU list.

For protecting the read side, reuse kvm->irq_srcu which is already used
for protecting a number of irq related things (kvm->irq_routing,
irqfd->resampler->list, kvm->irq_ack_notifier_list,
kvm->arch.mask_notifier_list).
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Message-Id: <20230322204344.50138-2-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The Hyper-V "EnlightenedNptTlb" enlightenment is always enabled when KVM
is running on top of Hyper-V and Hyper-V exposes support for it (which
is always). On AMD CPUs this enlightenment results in ASID invalidations
not flushing TLB entries derived from the NPT. To force the underlying
(L0) hypervisor to rebuild its shadow page tables, an explicit hypercall
is needed.

The original KVM implementation of Hyper-V's "EnlightenedNptTlb" on SVM
only added remote TLB flush hooks. This worked out fine for a while, as
sufficient remote TLB flushes where being issued in KVM to mask the
problem. Since v5.17, changes in the TDP code reduced the number of
flushes and the out-of-sync TLB prevents guests from booting
successfully.

Split svm_flush_tlb_current() into separate callbacks for the 3 cases
(guest/all/current), and issue the required Hyper-V hypercall when a
Hyper-V TLB flush is needed. The most important case where the TLB flush
was missing is when loading a new PGD, which is followed by what is now
svm_flush_tlb_current().

Cc: stable@vger.kernel.org # v5.17+
Fixes: 1e0c7d40 ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Link: https://lore.kernel.org/lkml/43980946-7bbf-dcef-7e40-af904c456250@linux.microsoft.com/Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230324145233.4585-1-jpiotrowski@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM/riscv fixes for 6.3, take #1

- Fix VM hang in case of timer delta being zero

Merge tag 'kvmarm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.3, part #2

Fixes for a rather interesting set of bugs relating to the MMU:

 - Read the MMU notifier seq before dropping the mmap lock to guard
   against reading a potentially stale VMA

 - Disable interrupts when walking user page tables to protect against
   the page table being freed

 - Read the MTE permissions for the VMA within the mmap lock critical
   section, avoiding the use of a potentally stale VMA pointer

Additionally, some fixes targeting the vPMU:

 - Return the sum of the current perf event value and PMC snapshot for
   reads from userspace

 - Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
   otherwise lead to userspace erroneously resetting the vPMU during VM
   save/restore

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are a small set of USB and Thunderbolt driver fixes for reported
  problems and a documentation update, for 6.3-rc4.

  Included in here are:

   - documentation update for uvc gadget driver

   - small thunderbolt driver fixes

   - cdns3 driver fixes

   - dwc3 driver fixes

   - dwc2 driver fixes

   - chipidea driver fixes

   - typec driver fixes

   - onboard_usb_hub device id updates

   - quirk updates

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
  usb: dwc2: fix a race, don't power off/on phy for dual-role mode
  usb: dwc2: fix a devres leak in hw_enable upon suspend resume
  usb: chipidea: core: fix possible concurrent when switch role
  usb: chipdea: core: fix return -EINVAL if request role is the same with current role
  thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit
  thunderbolt: Disable interrupt auto clear for rings
  thunderbolt: Use const qualifier for `ring_interrupt_index`
  usb: gadget: Use correct endianness of the wLength field for WebUSB
  uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
  usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver
  usb: cdns3: Fix issue with using incorrect PCI device function
  usb: cdnsp: Fixes issue with redundant Status Stage
  MAINTAINERS: make me a reviewer of USB/IP
  thunderbolt: Use scale field when allocating USB3 bandwidth
  thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers
  thunderbolt: Call tb_check_quirks() after initializing adapters
  thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access
  thunderbolt: Fix memory leak in margining
  usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
  docs: usb: Add documentation for the UVC Gadget
  ...

Pull scheduler fix from Borislav Petkov:

 - Fix a corner case where vruntime of a task is not being sanitized

* tag 'sched_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Sanitize vruntime of entity being migrated

Pull perf fix from Borislav Petkov:

 - Properly clear perf event status tracking in the AMD perf event
   overflow handler

* tag 'perf_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/core: Always clear status for idx

Pull core fixes from Borislav Petkov:

 - Do the delayed RCU wakeup for kthreads in the proper order so that
   former doesn't get ignored

 - A noinstr warning fix

* tag 'core_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up
  entry: Fix noinstr warning in __enter_from_user_mode()

Pull x86 fixes from Borislav Petkov:

 - Add a AMX ptrace self test

 - Prevent a false-positive warning when retrieving the (invalid)
   address of dynamic FPU features in their init state which are not
   saved in init_fpstate at all

 - Randomize per-CPU entry areas only when KASLR is enabled

* tag 'x86_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/x86/amx: Add a ptrace test
  x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()
  x86/mm: Do not shuffle CPU entry areas without KASLR

Pull cifs client fixes from Steve French:
 "Twelve cifs/smb3 client fixes (most also for stable)

   - forced umount fix

   - fix for two perf regressions

   - reconnect fixes

   - small debugging improvements

   - multichannel fixes"

* tag 'smb3-client-fixes-6.3-rc3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix unusable share after force unmount failure
  cifs: fix dentry lookups in directory handle cache
  smb3: lower default deferred close timeout to address perf regression
  cifs: fix missing unload_nls() in smb2_reconnect()
  cifs: avoid race conditions with parallel reconnects
  cifs: append path to open_enter trace event
  cifs: print session id while listing open files
  cifs: dump pending mids for all channels in DebugData
  cifs: empty interface list when server doesn't support query interfaces
  cifs: do not poll server interfaces too regularly
  cifs: lock chan_lock outside match_session
  cifs: check only tcon status on tcon related functions

Pull nfsd fix from Chuck Lever:

 - Fix a crash when using NFS with krb5p

* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix a crash in gss_krb5_checksum()

Pull yet more xfs bug fixes from Darrick Wong:
 "The first bugfix addresses a longstanding problem where we use the
  wrong file mapping cursors when trying to compute the speculative
  preallocation quantity. This has been causing sporadic crashes when
  alwayscow mode is engaged.

  The other two fixes correct minor problems in more recent changes.

   - Fix the new allocator tracepoints because git am mismerged the
     changes such that the trace_XXX got rebased to be in function YYY
     instead of XXX

   - Ensure that the perag AGFL_RESET state is consistent with whatever
     we've just read off the disk

   - Fix a bug where we used the wrong iext cursor during a write begin"

* tag 'xfs-6.3-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix mismerged tracepoints
  xfs: clear incore AGFL_RESET state if it's not needed
  xfs: pass the correct cursor to xfs_iomap_prealloc_size

Pull xfs percpu counter fixes from Darrick Wong:
 "We discovered a filesystem summary counter corruption problem that was
  traced to cpu hot-remove racing with the call to percpu_counter_sum
  that sets the free block count in the superblock when writing it to
  disk. The root cause is that percpu_counter_sum doesn't cull from
  dying cpus and hence misses those counter values if the cpu shutdown
  hooks have not yet run to merge the values.

  I'm hoping this is a fairly painless fix to the problem, since the
  dying cpu mask should generally be empty. It's been in for-next for a
  week without any complaints from the bots.

   - Fix a race in the percpu counters summation code where the
     summation failed to add in the values for any CPUs that were dying
     but not yet dead. This fixes some minor discrepancies and incorrect
     assertions when running generic/650"

* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  pcpcntr: remove percpu_counter_sum_all()
  fork: remove use of percpu_counter_sum_all
  pcpcntrs: fix dying cpu summation race
  cpumask: introduce for_each_cpu_or

Pull xfs fixes from Darrick Wong:
 "This batch started with some debugging enhancements to the new
  allocator refactoring that we put in 6.3-rc1 to assist developers in
  rebasing their dev branches.

  As for more serious code changes -- there's a bug fix to make the
  lockless allocator scan the whole filesystem before resorting to the
  locking allocator. We're also adding a selftest for the venerable
  directory/xattr hash function to make sure that it produces consistent
  results so that we can address any fallout as soon as possible.

   - Add a few debugging assertions so that people (me) trying to port
     code to the new allocator functions don't mess up the caller
     requirements

   - Relax some overly cautious lock ordering enforcement in the new
     allocator code, which means that file allocations will locklessly
     scan for the best space they can get before backing off to the
     traditional lock-and-really-get-it behavior

   - Add tracepoints to make it easier to trace the xfs allocator
     behavior

   - Actually test the dir/xattr hash algorithm to make sure it produces
     consistent results across all the platforms XFS supports"

* tag 'xfs-6.3-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: test dir/attr hash when loading module
  xfs: add tracepoints for each of the externally visible allocators
  xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags
  xfs: try to idiot-proof the allocators

Merge tag 'hwmon-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - it87: Fix voltage scaling for chips with 10.9mV ADCs

 - xgene: Fix ioremap and memremap leak

 - peci/cputemp: Fix miscalculated DTS temperature for SKX

 - hwmon core: fix potential sensor registration failure with thermal
   subsystem if of_node is missing

* tag 'hwmon-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon (it87): Fix voltage scaling for chips with 10.9mV  ADCs
  hwmon: (xgene) Fix ioremap and memremap leak
  hwmon: fix potential sensor registration fail if of_node is missing
  hwmon: (peci/cputemp) Fix miscalculated DTS for SKX

Merge tag 'mm-hotfixes-stable-2023-03-24-17-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "21 hotfixes, 8 of which are cc:stable. 11 are for MM, the remainder
  are for other subsystems"

* tag 'mm-hotfixes-stable-2023-03-24-17-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
  mm: mmap: remove newline at the end of the trace
  mailmap: add entries for Richard Leitner
  kcsan: avoid passing -g for test
  kfence: avoid passing -g for test
  mm: kfence: fix using kfence_metadata without initialization in show_object()
  lib: dhry: fix unstable smp_processor_id(_) usage
  mailmap: add entry for Enric Balletbo i Serra
  mailmap: map Sai Prakash Ranjan's old address to his current one
  mailmap: map Rajendra Nayak's old address to his current one
  Revert "kasan: drop skip_kasan_poison variable in free_pages_prepare"
  mailmap: add entry for Tobias Klauser
  kasan, powerpc: don't rename memintrinsics if compiler adds prefixes
  mm/ksm: fix race with VMA iteration and mm_struct teardown
  kselftest: vm: fix unused variable warning
  mm: fix error handling for map_deny_write_exec
  mm: deduplicate error handling for map_deny_write_exec
  checksyscalls: ignore fstat to silence build warning on LoongArch
  nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()
  test_maple_tree: add more testing for mas_empty_area()
  maple_tree: fix mas_skip_node() end slot detection
  ...

Pull ksmbd server fixes from Steve French:

 - return less confusing messages on unsupported dialects
   (STATUS_NOT_SUPPORTED instead of I/O error)

 - fix for overly frequent inactive session termination

 - fix refcount leak

 - fix bounds check problems found by static checkers

 - fix to advertise named stream support correctly

 - Fix AES256 signing bug when connected to from MacOS

* tag '6.3-rc3-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: return unsupported error on smb1 mount
  ksmbd: return STATUS_NOT_SUPPORTED on unsupported smb2.0 dialect
  ksmbd: don't terminate inactive sessions after a few seconds
  ksmbd: fix possible refcount leak in smb2_open()
  ksmbd: add low bound validation to FSCTL_QUERY_ALLOCATED_RANGES
  ksmbd: add low bound validation to FSCTL_SET_ZERO_DATA
  ksmbd: set FILE_NAMED_STREAMS attribute in FS_ATTRIBUTE_INFORMATION
  ksmbd: fix wrong signingkey creation when encryption is AES256

Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, most of the bug fixes address issues in the devicetree
  files, and out of these, most are for the Qualcomm and NXP platforms,
  including:

   - A missing 'reserved-memory' property on LG G Watch R that is needed
     to prevent clashing with firmware

   - Annotations for cache coherency on multiple machines

   - Corrections for pinctrl, regulator, clock, iommu and power domain
     properties for i.MX and Qualcomm to correctly reflect the hardware
     settings

   - Firmware file names on multiple machines SA8540P Ride board

   - An incompatible change to the qcom vadc driver requires adding
     individual labels

   - Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
     and switch to the new bindings.

   - A fix for PCI bus address translation Tegra194 and Tegra234.

  There are also a couple of device driver fixes, addressing:

   - A race condition in the amdtee driver

   - A performance regression in the Qualcomm 'llcc' driver

   - An unitialized variable use NXP i.MX 'weim' driver

   - Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
     the Arm scmi firmware driver"

* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
  arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
  bus: imx-weim: fix branch condition evaluates to a garbage value
  arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
  ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
  arm64: dts: imx93: Fix eqos properties
  arm64: dts: imx8mp: Fix LCDIF2 node clock order
  arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
  arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
  firmware: qcom: scm: fix bogus irq error at probe
  arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
  arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
  arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
  ...

Pull power supply fixes from Sebastian Reichel:

 - rk817: Fix compiler warning

 - cros_usbpd-charger: Fix excessive error printing

 - axp288_fuel_gauge: handle platform_get_irq error

 - bq24190 and da9150: Fix race condition in remove path

* tag 'for-v6.3-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition
  power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition
  power: supply: axp288_fuel_gauge: Added check for negative values
  power: supply: cros_usbpd: reclassify "default case!" as debug
  power: supply: rk817: Fix unsigned comparison with less than zero

Pull drm fixes from Daniel Vetter:

 - usual pile of fixes for amdgpu & i915

 - probe error handling fixes for meson, lt8912b bridge

 - the host1x patch from Arnd

 - panel-orientation fix for Lenovo Book X90F

* tag 'drm-fixes-2023-03-24' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  gpu: host1x: fix uninitialized variable use
  drm/amd/display: Set dcn32 caps.seamless_odm
  drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk
  drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi
  drm/amd/display: remove outdated 8bpc comments
  drm/amdgpu/gfx: set cg flags to enter/exit safe mode
  drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobs
  drm/amdgpu: add mes resume when do gfx post soft reset
  drm/amdgpu: skip ASIC reset for APUs when go to S4
  drm/amdgpu: reposition the gpu reset checking for reuse
  drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found
  drm/meson: fix missing component unbind on bind errors
  drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90F
  Revert "drm/i915/hwmon: Enable PL1 power limit"
  drm/i915: Update vblank timestamping stuff on seamless M/N change
  drm/i915: Fix format for perf_limit_reasons
  drm/i915/gt: perform uc late init after probe error injection
  drm/i915/active: Fix missing debug object activation
  drm/i915/guc: Fix missing ecodes
  drm/i915/mtl: Disable MC6 for MTL A step
  ...

Merge tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM thin to work as a swap device by using 'limit_swap_bios' DM
   target flag (initially added to allow swap to dm-crypt) to throttle
   the amount of outstanding swap bios.

 - Fix DM crypt soft lockup warnings by calling cond_resched() from the
   cpu intensive loop in dmcrypt_write().

 - Fix DM crypt to not access an uninitialized tasklet. This fix allows
   for consistent handling of IO completion, by _not_ needlessly punting
   to a workqueue when tasklets are not needed.

 - Fix DM core's alloc_dev() initialization for DM stats to check for
   and propagate alloc_percpu() failure.

* tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm stats: check for and propagate alloc_percpu failure
  dm crypt: avoid accessing uninitialized tasklet
  dm crypt: add cond_resched() to dmcrypt_write()
  dm thin: fix deadlock when swapping to thin device

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
     - Send Identify with CNS 06h only to I/O controllers (Martin
       George)
     - Fix nvme_tcp_term_pdu to match spec (Caleb Sander)

 - Pass in issue_flags for uring_cmd, so the end_io handlers don't need
   to assume what the right context is (me)

 - Fix for ublk, marking it as LIVE before adding it to avoid races on
   the initial IO (Ming)

* tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux:
  nvme-tcp: fix nvme_tcp_term_pdu to match spec
  nvme: send Identify with CNS 06h only to I/O controllers
  block/io_uring: pass in issue_flags for uring_cmd task_work handling
  block: ublk_drv: mark device as LIVE before adding disk

Pull io_uring fixes from Jens Axboe:

 - Fix an issue with repeated -ECONNREFUSED on a socket (me)

 - Fix a NULL pointer deference due to a stale lookup cache for
   allocating direct descriptors (Savino)

* tag 'io_uring-6.3-2023-03-24' of git://git.kernel.dk/linux:
  io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()
  io_uring/net: avoid sending -ECONNABORTED on repeated connection requests

Pull thermal control fixes from Rafael Wysocki:
 "These address two recent regressions related to thermal control.

  Specifics:

   - Restore the thermal core behavior regarding zero-temperature trip
     points to avoid a driver regression (Ido Schimmel)

   - Fix a recent regression in the ACPI processor driver preventing it
     from changing the number of CPU cooling device states exposed via
     sysfs after the given CPU cooling device has been registered
     (Rafael Wysocki)"

* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Restore behavior regarding invalid trip points
  ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
  thermal: core: Introduce thermal_cooling_device_update()
  thermal: core: Introduce thermal_cooling_device_present()
  ACPI: processor: Reorder acpi_processor_driver_init()

Pull ACPI fixes from Rafael Wysocki:
 "These add new ACPI IRQ override and backlight detection quirks.

  Specifics:

   - Add backlight=native DMI quirk for Acer Aspire 3830TG to the ACPI
     backlight driver (Hans de Goede)

   - Add an ACPI IRQ override quirk for Medion S17413 (Aymeric Wibo)"

* tag 'acpi-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Add Medion S17413 to IRQ override quirk
  ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG

At some point in between sending this patch to the list and merging it
into for-next, the tracepoints got all mixed up because I've
over-reliant on automated tools not sucking.  The end result is that the
tracepoints are all wrong, so fix them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

If user does forced unmount ("umount -f") while files are still open
on the share (as was seen in a Kubernetes example running on SMB3.1.1
mount) then we were marking the share as "TID_EXITING" in umount_begin()
which caused all subsequent operations (except write) to fail ... but
unfortunately when umount_begin() is called we do not know yet that
there are open files or active references on the share that would prevent
unmount from succeeding.  Kubernetes had example when they were doing
umount -f when files were open which caused the share to become
unusable until the files were closed (and the umount retried).

Fix this so that TID_EXITING is not set until we are about to send
the tree disconnect (not at the beginning of forced umounts in
umount_begin) so that if "umount -f" fails (due to open files or
references) the mount is still usable.

Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Get rid of any prefix paths in @path before lookup_positive_unlocked()
as it will call ->lookup() which already adds those prefix paths
through build_path_from_dentry().

This has caused a performance regression when mounting shares with a
prefix path where readdir(2) would end up retrying several times to
open bad directory names that contained duplicate prefix paths.

Fix this by skipping any prefix paths in @path before calling
lookup_positive_unlocked().

Fixes: e4029e07 ("cifs: find and use the dentry for cached non-root directories also")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Performance tests with large number of threads noted that the change
of the default closetimeo (deferred close timeout between when
close is done by application and when client has to send the close
to the server), to 5 seconds from 1 second, significantly degraded
perf in some cases like this (in the filebench example reported,
the stats show close requests on the wire taking twice as long,
and 50% regression in filebench perf). This is stil configurable
via mount parm closetimeo, but to be safe, decrease default back
to its previous value of 1 second.
Reported-by: Yin Fengwei <fengwei.yin@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/lkml/997614df-10d4-af53-9571-edec36b0e2f3@intel.com/
Fixes: 5efdd912 ("smb3: allow deferred close timeout to be configurable")
Cc: stable@vger.kernel.org # 6.0+
Tested-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Make sure to unload_nls() @nls_codepage if we no longer need it.

Fixes: bc962159 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull slab fix from Vlastimil Babka:
 "A single build fix for a corner case configuration that is apparently
  possible to achieve on some arches, from Geert"

* tag 'slab-fix-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slab: Fix undefined init_cache_node_node() for NUMA and !SMP