Introduces the TRAP_PERF si_code, and associated siginfo_t field
si_perf. These will be used by the perf event subsystem to send signals
(if requested) to the task where an event occurred.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de> # asm-generic
Link: https://lkml.kernel.org/r/20210408103605.1676875-6-elver@google.com

Adds bit perf_event_attr::remove_on_exec, to support removing an event
from a task on exec.

This option supports the case where an event is supposed to be
process-wide only, and should not propagate beyond exec, to limit
monitoring to the original process image only.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-5-elver@google.com

Adds bit perf_event_attr::inherit_thread, to restricting inheriting
events only if the child was cloned with CLONE_THREAD.

This option supports the case where an event is supposed to be
process-wide only (including subthreads), but should not propagate
beyond the current process's shared environment.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YBvj6eJR%2FDY2TsEB@hirez.programming.kicks-ass.net/

As with other ioctls (such as PERF_EVENT_IOC_{ENABLE,DISABLE}), fix up
handling of PERF_EVENT_IOC_MODIFY_ATTRIBUTES to also apply to children.
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/20210408103605.1676875-3-elver@google.com

Make perf_event_exit_event() more robust, such that we can use it from
other contexts. Specifically the up and coming remove_on_exec.

For this to work we need to address a few issues. Remove_on_exec will
not destroy the entire context, so we cannot rely on TASK_TOMBSTONE to
disable event_function_call() and we thus have to use
perf_remove_from_context().

When using perf_remove_from_context(), there's two races to consider.
The first is against close(), where we can have concurrent tear-down
of the event. The second is against child_list iteration, which should
not find a half baked event.

To address this, teach perf_remove_from_context() to special case
!ctx->is_active and about DETACH_CHILD.

[ elver@google.com: fix racing parent/child exit in sync_child_event(). ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-2-elver@google.com

Turns out, the default setting of attr.aux_watermark to half of the total
buffer size is not very useful, especially with smaller buffers. The
problem is that, after half of the buffer is filled up, the kernel updates
->aux_head and sets up the next "transaction", while observing that
->aux_tail is still zero (as userspace haven't had the chance to update
it), meaning that the trace will have to stop at the end of this second
"transaction". This means, for example, that the second PERF_RECORD_AUX in
every trace comes with TRUNCATED flag set.

Setting attr.aux_watermark to quarter of the buffer gives enough space for
the ->aux_tail update to be observed and prevents the data loss.

The obligatory before/after showcase:

> # perf_before record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 6 times to write data ]
> Warning:
> AUX data lost 4 times out of 10!
>
> [ perf record: Captured and wrote 0.099 MB perf.data ]
> # perf record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 4 times to write data ]
> [ perf record: Captured and wrote 0.039 MB perf.data ]

The effect is still visible with large workloads and large buffers,
although less pronounced.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-3-alexander.shishkin@linux.intel.com

Currently, we start allocating AUX pages half the size of the total
requested AUX buffer size, ignoring the attr.aux_watermark setting. This,
in turn, makes intel_pt driver disregard the watermark also, as it uses
page order for its SG (ToPA) configuration.

Now, this can be fixed in the intel_pt PMU driver, but seeing as it's the
only one currently making use of high order allocations, there is no
reason not to fix the allocator instead. This way, any other driver
wishing to add this support would not have to worry about this.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-2-alexander.shishkin@linux.intel.com

IIO stacks to PMON mapping on Skylake servers is exposed through introduced
early attributes /sys/devices/uncore_iio_<pmu_idx>/dieX, where dieX is a
file which holds "Segment:Root Bus" for PCIe root port which can
be monitored by that IIO PMON block. These sysfs attributes are disabled
for multiple segment topologies except VMD domains which start at 0x10000.
This patch removes the limitation and enables IIO stacks to PMON mapping
for multi-segment Skylake servers by introducing segment-aware
intel_uncore_topology structure and attributing the topology configuration
to the segment in skx_iio_get_topology() function.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Kyle Meyer <kyle.meyer@hpe.com>
Link: https://lkml.kernel.org/r/20210323150507.2013-1-alexander.antonov@linux.intel.com

The discovery table provides the generic uncore block information
for the MMIO type of uncore blocks, which is good enough to provide
basic uncore support.

The box control field is composed of the BAR address and box control
offset. When initializing the uncore blocks, perf should ioremap the
address from the box control field.

Implement the generic support for the MMIO type of uncore block.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-6-git-send-email-kan.liang@linux.intel.com

The discovery table provides the generic uncore block information
for the PCI type of uncore blocks, which is good enough to provide
basic uncore support.

The PCI BUS and DEVFN information can be retrieved from the box control
field. Introduce the uncore_pci_pmus_register() to register all the
PCICFG type of uncore blocks. The old PCI probe/remove way is dropped.

The PCI BUS and DEVFN information are different among dies. Add box_ctls
to store the box control field of each die.

Add a new BUS notifier for the PCI type of uncore block to support the
hotplug. If the device is "hot remove", the corresponding registered PMU
has to be unregistered. Perf cannot locate the PMU by searching a const
pci_device_id table, because the discovery tables don't provide such
information. Introduce uncore_pci_find_dev_pmu_from_types() to search
the whole uncore_pci_uncores for the PMU.

Implement generic support for the PCI type of uncore block.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-5-git-send-email-kan.liang@linux.intel.com

Perf will use a similar method to the PCI sub driver to register
the PMUs for the PCI type of uncore blocks. The method requires a BUS
notifier to support hotplug. The current BUS notifier cannot be reused,
because it searches a const id_table for the corresponding registered
PMU. The PCI type of uncore blocks in the discovery tables doesn't
provide an id_table.

Factor out uncore_bus_notify() and add the pointer of an id_table as a
parameter. The uncore_bus_notify() will be reused in the following
patch.

The current BUS notifier is only used by the PCI sub driver. Its name is
too generic. Rename it to uncore_pci_sub_notifier, which is specific for
the PCI sub driver.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-4-git-send-email-kan.liang@linux.intel.com

The discovery table provides the generic uncore block information for
the MSR type of uncore blocks, e.g., the counter width, the number of
counters, the location of control/counter registers, which is good
enough to provide basic uncore support. It can be used as a fallback
solution when the kernel doesn't support a platform.

The name of the uncore box cannot be retrieved from the discovery table.
uncore_type_&typeID_&boxID will be used as its name. Save the type ID
and the box ID information in the struct intel_uncore_type.
Factor out uncore_get_pmu_name() to handle different naming methods.

Implement generic support for the MSR type of uncore block.

Some advanced features, such as filters and constraints, cannot be
retrieved from discovery tables. Features that rely on that
information are not be supported here.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-3-git-send-email-kan.liang@linux.intel.com

A self-describing mechanism for the uncore PerfMon hardware has been
introduced with the latest Intel platforms. By reading through an MMIO
page worth of information, perf can 'discover' all the standard uncore
PerfMon registers in a machine.

The discovery mechanism relies on BIOS's support. With a proper BIOS,
a PCI device with the unique capability ID 0x23 can be found on each
die. Perf can retrieve the information of all available uncore PerfMons
from the device via MMIO. The information is composed of one global
discovery table and several unit discovery tables.
- The global discovery table includes global uncore information of the
  die, e.g., the address of the global control register, the offset of
  the global status register, the number of uncore units, the offset of
  unit discovery tables, etc.
- The unit discovery table includes generic uncore unit information,
  e.g., the access type, the counter width, the address of counters,
  the address of the counter control, the unit ID, the unit type, etc.
  The unit is also called "box" in the code.
Perf can provide basic uncore support based on this information
with the following patches.

To locate the PCI device with the discovery tables, check the generic
PCI ID first. If it doesn't match, go through the entire PCI device tree
and locate the device with the unique capability ID.

The uncore information is similar among dies. To save parsing time and
space, only completely parse and store the discovery tables on the first
die and the first box of each die. The parsed information is stored in
an
RB tree structure, intel_uncore_discovery_type. The size of the stored
discovery tables varies among platforms. It's around 4KB for a Sapphire
Rapids server.

If a BIOS doesn't support the 'discovery' mechanism, the uncore driver
will exit with -ENODEV. There is nothing changed.

Add a module parameter to disable the discovery feature. If a BIOS gets
the discovery tables wrong, users can have an option to disable the
feature. For the current patchset, the uncore driver will exit with
-ENODEV. In the future, it may fall back to the hardcode uncore driver
on a known platform.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1616003977-90612-2-git-send-email-kan.liang@linux.intel.com

Currently, the lockdown state is queried unconditionally, even though
its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in
attr.sample_type. While that doesn't matter in case of the Lockdown LSM,
it causes trouble with the SELinux's lockdown hook implementation.

SELinux implements the locked_down hook with a check whether the current
task's type has the corresponding "lockdown" class permission
("integrity" or "confidentiality") allowed in the policy. This means
that calling the hook when the access control decision would be ignored
generates a bogus permission check and audit record.

Fix this by checking sample_type first and only calling the hook when
its result would be honored.

Fixes: b0c8fdc7 ("lockdown: Lock down perf when in confidentiality mode")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lkml.kernel.org/r/20210224215628.192519-1-omosnace@redhat.com

For cpu events, it'd better allocating them in the corresponding node
memory as they would be mostly accessed by the target cpu.  Although
perf tools sets the cpu affinity before calling perf_event_open, there
are places it doesn't (notably perf record) and we should consider
other external users too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311115413.444407-2-namhyung@kernel.org

The kernel can allocate a lot of struct perf_event when profiling. For
example, 256 cpu x 8 events x 20 cgroups = 40K instances of the struct
would be allocated on a large system.

The size of struct perf_event in my setup is 1152 byte. As it's
allocated by kmalloc, the actual allocation size would be rounded up
to 2K.

Then there's 896 byte (~43%) of waste per instance resulting in total
~35MB with 40K instances. We can create a dedicated kmem_cache to
avoid such a big unnecessary memory consumption.

With this change, I can see below (note this machine has 112 cpus).

  # grep perf_event /proc/slabinfo
  perf_event    224    784   1152    7    2 : tunables   24   12    8 : slabdata    112    112      0

The sixth column is pages-per-slab which is 2, and the fifth column is
obj-per-slab which is 7.  Thus actually it can use 1152 x 7 = 8064
byte in the 8K, and wasted memory is (8192 - 8064) / 7 = ~18 byte per
instance.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311115413.444407-1-namhyung@kernel.org

I found the ring buffer pages are allocated in the node but the ring
buffer itself is not.  Let's convert it to use kzalloc_node() too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210315033436.682438-1-namhyung@kernel.org

Doing a

	prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1);

will copy 1 byte from userspace to (quite big) on-stack array
and then stash everything to mm->saved_auxv.
AT_NULL terminator will be inserted at the very end.

/proc/*/auxv handler will find that AT_NULL terminator
and copy original stack contents to userspace.

This devious scheme requires CAP_SYS_RESOURCE.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Thomas Gleixner:
 "A set of irqchip updates:

   - Make the GENERIC_IRQ_MULTI_HANDLER configuration correct

   - Add a missing DT compatible string for the Ingenic driver

   - Remove the pointless debugfs_file pointer from struct irqdomain"

* tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ingenic: Add support for the JZ4760
  dt-bindings/irq: Add compatible string for the JZ4760B
  irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
  irqdomain: Remove debugfs_file from struct irq_domain

Pull timer fix from Thomas Gleixner:
 "A single fix in for hrtimers to prevent an interrupt storm caused by
  the lack of reevaluation of the timers which expire in softirq context
  under certain circumstances, e.g. when the clock was set"

* tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler updates:

   - Prevent a NULL pointer dereference in the migration_stop_cpu()
     mechanims

   - Prevent self concurrency of affine_move_task()

   - Small fixes and cleanups related to task migration/affinity setting

   - Ensure that sync_runqueues_membarrier_state() is invoked on the
     current CPU when it is in the cpu mask"

* tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/membarrier: fix missing local execution of ipi_sync_rq_state()
  sched: Simplify set_affinity_pending refcounts
  sched: Fix affine_move_task() self-concurrency
  sched: Optimize migration_cpu_stop()
  sched: Collate affine_move_task() stoppers
  sched: Simplify migration_cpu_stop()
  sched: Fix migration_cpu_stop() requeueing

Pull objtool fix from Thomas Gleixner:
 "A single objtool fix to handle the PUSHF/POPF validation correctly for
  the paravirt changes which modified arch_local_irq_restore not to use
  popf"

* tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool,x86: Fix uaccess PUSHF/POPF validation

Pull locking fixes from Thomas Gleixner:
 "A couple of locking fixes:

   - A fix for the static_call mechanism so it handles unaligned
     addresses correctly.

   - Make u64_stats_init() a macro so every instance gets a seperate
     lockdep key.

   - Make seqcount_latch_init() a macro as well to preserve the static
     variable which is used for the lockdep key"

* tag 'locking-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  seqlock,lockdep: Fix seqcount_latch_init()
  u64_stats,lockdep: Fix u64_stats_init() vs lockdep
  static_call: Fix the module key fixup

Pull perf fixes from Borislav Petkov:

 - Make sure PMU internal buffers are flushed for per-CPU events too and
   properly handle PID/TID for large PEBS.

 - Handle the case properly when there's no PMU and therefore return an
   empty list of perf MSRs for VMX to switch instead of reading random
   garbage from the stack.

* tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case
  perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
  perf/core: Flush PMU internal buffers for per-CPU events

Pull EFI fix from Ard Biesheuvel via Borislav Petkov:
 "Fix an oversight in the handling of EFI_RT_PROPERTIES_TABLE, which was
  added v5.10, but failed to take the SetVirtualAddressMap() RT service
  into account"

* tag 'efi-urgent-for-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table

Pull x86 fixes from Borislav Petkov:

 - A couple of SEV-ES fixes and robustifications: verify usermode stack
   pointer in NMI is not coming from the syscall gap, correctly track
   IRQ states in the #VC handler and access user insn bytes atomically
   in same handler as latter cannot sleep.

 - Balance 32-bit fast syscall exit path to do the proper work on exit
   and thus not confuse audit and ptrace frameworks.

 - Two fixes for the ORC unwinder going "off the rails" into KASAN
   redzones and when ORC data is missing.

* tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use __copy_from_user_inatomic()
  x86/sev-es: Correctly track IRQ states in runtime #VC handler
  x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
  x86/sev-es: Introduce ip_within_syscall_gap() helper
  x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
  x86/unwind/orc: Silence warnings caused by missing ORC data
  x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.12:

   - Fix wrong instruction encoding for lis in ppc_function_entry(),
     which could potentially lead to missed kprobes.

   - Fix SET_FULL_REGS on 32-bit and 64e, which prevented ptrace of
     non-volatile GPRs immediately after exec.

   - Clean up a missed SRR specifier in the recent interrupt rework.

   - Don't treat unrecoverable_exception() as an interrupt handler, it's
     called from other handlers so shouldn't do the interrupt entry/exit
     accounting itself.

   - Fix build errors caused by missing declarations for
     [en/dis]able_kernel_vsx().

  Thanks to Christophe Leroy, Daniel Axtens, Geert Uytterhoeven, Jiri
  Olsa, Naveen N. Rao, and Nicholas Piggin"

* tag 'powerpc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/traps: unrecoverable_exception() is not an interrupt handler
  powerpc: Fix missing declaration of [en/dis]able_kernel_vsx()
  powerpc/64s/exception: Clean up a missed SRR specifier
  powerpc: Fix inverted SET_FULL_REGS bitop
  powerpc/64s: Use symbolic macros for function entry encoding
  powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()

Pull KVM fixes from Paolo Bonzini:
 "More fixes for ARM and x86"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: LAPIC: Advancing the timer expiration on guest initiated write
  KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode
  KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
  kvm: x86: annotate RCU pointers
  KVM: arm64: Fix exclusive limit for IPA size
  KVM: arm64: Reject VM creation when the default IPA size is unsupported
  KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
  KVM: arm64: Don't use cbz/adr with external symbols
  KVM: arm64: Fix range alignment when walking page tables
  KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility
  KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()
  KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available
  KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key
  KVM: arm64: Fix nVHE hyp panic host context restore
  KVM: arm64: Avoid corrupting vCPU context register in guest exit
  KVM: arm64: nvhe: Save the SPE context early
  kvm: x86: use NULL instead of using plain integer as pointer
  KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled'
  KVM: x86: Ensure deadline timer has truly expired before posting its IRQ

Merge misc fixes from Andrew Morton:
 "28 patches.

  Subsystems affected by this series: mm (memblock, pagealloc, hugetlb,
  highmem, kfence, oom-kill, madvise, kasan, userfaultfd, memcg, and
  zram), core-kernel, kconfig, fork, binfmt, MAINTAINERS, kbuild, and
  ia64"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits)
  zram: fix broken page writeback
  zram: fix return value on writeback_store
  mm/memcg: set memcg when splitting page
  mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument
  ia64: fix ptrace(PTRACE_SYSCALL_INFO_EXIT) sign
  ia64: fix ia64_syscall_get_set_arguments() for break-based syscalls
  mm/userfaultfd: fix memory corruption due to writeprotect
  kasan: fix KASAN_STACK dependency for HW_TAGS
  kasan, mm: fix crash with HW_TAGS and DEBUG_PAGEALLOC
  mm/madvise: replace ptrace attach requirement for process_madvise
  include/linux/sched/mm.h: use rcu_dereference in in_vfork()
  kfence: fix reports if constant function prefixes exist
  kfence, slab: fix cache_alloc_debugcheck_after() for bulk allocations
  kfence: fix printk format for ptrdiff_t
  linux/compiler-clang.h: define HAVE_BUILTIN_BSWAP*
  MAINTAINERS: exclude uapi directories in API/ABI section
  binfmt_misc: fix possible deadlock in bm_register_write
  mm/highmem.c: fix zero_user_segments() with start > end
  hugetlb: do early cow when page pinned on src mm
  mm: use is_cow_mapping() across tree where proper
  ...

Merge tag 'irqchip-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

  - More compatible strings for the Ingenic irqchip (introducing the
    JZ4760B SoC)
  - Select GENERIC_IRQ_MULTI_HANDLER on the ARM ep93xx platform
  - Drop all GENERIC_IRQ_MULTI_HANDLER selections from the irqchip
    Kconfig, now relying on the architecture to get it right
  - Drop the debugfs_file field from struct irq_domain, now that
    debugfs can track things on its own

Pull char/misc driver fixes from Greg KH:
 "Here are some small misc/char driver fixes to resolve some reported
  problems:

   - habanalabs driver fixes

   - Acrn build fixes (reported many times)

   - pvpanic module table export fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc/pvpanic: Export module FDT device table
  misc: fastrpc: restrict user apps from sending kernel RPC messages
  virt: acrn: Correct type casting of argument of copy_from_user()
  virt: acrn: Use EPOLLIN instead of POLLIN
  virt: acrn: Use vfs_poll() instead of f_op->poll()
  virt: acrn: Make remove_cpu sysfs invisible with !CONFIG_HOTPLUG_CPU
  cpu/hotplug: Fix build error of using {add,remove}_cpu() with !CONFIG_SMP
  habanalabs: fix debugfs address translation
  habanalabs: Disable file operations after device is removed
  habanalabs: Call put_pid() when releasing control device
  drivers: habanalabs: remove unused dentry pointer for debugfs files
  habanalabs: mark hl_eq_inc_ptr() as static

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for reported problems. They
  include:

   - wfx header file cleanup patch reverted as it could cause problems

   - comedi driver endian fixes

   - buffer overflow problems for staging wifi drivers

   - build dependency issue for rtl8192e driver

  All have been in linux-next for a while with no reported problems"

* tag 'staging-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
  Revert "staging: wfx: remove unused included header files"
  staging: rtl8188eu: prevent ->ssid overflow in rtw_wx_set_scan()
  staging: rtl8188eu: fix potential memory corruption in rtw_check_beacon_data()
  staging: rtl8192u: fix ->ssid overflow in r8192_wx_set_scan()
  staging: comedi: pcl726: Use 16-bit 0 for interrupt data
  staging: comedi: ni_65xx: Use 16-bit 0 for interrupt data
  staging: comedi: ni_6527: Use 16-bit 0 for interrupt data
  staging: comedi: comedi_parport: Use 16-bit 0 for interrupt data
  staging: comedi: amplc_pc236_common: Use 16-bit 0 for interrupt data
  staging: comedi: pcl818: Fix endian problem for AI command data
  staging: comedi: pcl711: Fix endian problem for AI command data
  staging: comedi: me4000: Fix endian problem for AI command data
  staging: comedi: dmm32at: Fix endian problem for AI command data
  staging: comedi: das800: Fix endian problem for AI command data
  staging: comedi: das6402: Fix endian problem for AI command data
  staging: comedi: adv_pci1710: Fix endian problem for AI command data
  staging: comedi: addi_apci_1500: Fix endian problem for command sample
  staging: comedi: addi_apci_1032: Fix endian problem for COS sample
  staging: ks7010: prevent buffer overflow in ks_wlan_set_scan()
  staging: rtl8712: Fix possible buffer overflow in r8712_sitesurvey_cmd
  ...

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes to resolve some
  reported problems:

   - led tty trigger fixes based on review and were acked by the led
     maintainer

   - revert a max310x serial driver patch as it was causing problems

   - revert a pty change as it was also causing problems

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "drivers:tty:pty: Fix a race causing data loss on close"
  Revert "serial: max310x: rework RX interrupt handling"
  leds: trigger/tty: Use led_set_brightness_sync() from workqueue
  leds: trigger: Fix error path to not unlock the unlocked mutex

Pull USB fixes from Greg KH:
 "Here are a small number of USB fixes for 5.12-rc3 to resolve a bunch
  of reported issues:

   - usbip fixups for issues found by syzbot

   - xhci driver fixes and quirk additions

   - gadget driver fixes

   - dwc3 QCOM driver fix

   - usb-serial new ids and fixes

   - usblp fix for a long-time issue

   - cdc-acm quirk addition

   - other tiny fixes for reported problems

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  xhci: Fix repeated xhci wake after suspend due to uncleared internal wake state
  usb: xhci: Fix ASMedia ASM1042A and ASM3242 DMA addressing
  xhci: Improve detection of device initiated wake signal.
  usb: xhci: do not perform Soft Retry for some xHCI hosts
  usbip: fix vudc usbip_sockfd_store races leading to gpf
  usbip: fix vhci_hcd attach_store() races leading to gpf
  usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  usbip: fix vudc to check for stream socket
  usbip: fix vhci_hcd to check for stream socket
  usbip: fix stub_dev to check for stream socket
  usb: dwc3: qcom: Add missing DWC3 OF node refcount decrement
  USB: usblp: fix a hang in poll() if disconnected
  USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()
  usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
  usb: dwc3: qcom: Honor wakeup enabled/disabled state
  usb: gadget: f_uac1: stop playback on function disable
  usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot
  USB: gadget: u_ether: Fix a configfs return code
  usb: dwc3: qcom: add ACPI device id for sc8180x
  Goodix Fingerprint device is not a modem
  ...

Pull erofs fix from Gao Xiang:
 "Fix an urgent regression introduced by commit baa2c7c9 ("block:
  set .bi_max_vecs as actual allocated vector number"), which could
  cause unexpected hung since linux 5.12-rc1.

  Resolve it by avoiding using bio->bi_max_vecs completely"

* tag 'erofs-for-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix bio->bi_max_vecs behavior change

Merge tag 'kbuild-fixes-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - avoid 'make image_name' invoking syncconfig

 - fix a couple of bugs in scripts/dummy-tools

 - fix LLD_VENDOR and locale issues in scripts/ld-version.sh

 - rebuild GCC plugins when the compiler is upgraded

 - allow LTO to be enabled with KASAN_HW_TAGS

 - allow LTO to be enabled without LLVM=1

* tag 'kbuild-fixes-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: fix ld-version.sh to not be affected by locale
  kbuild: remove meaningless parameter to $(call if_changed_rule,dtc)
  kbuild: remove LLVM=1 test from HAS_LTO_CLANG
  kbuild: remove unneeded -O option to dtc
  kbuild: dummy-tools: adjust to scripts/cc-version.sh
  kbuild: Allow LTO to be selected with KASAN_HW_TAGS
  kbuild: dummy-tools: support MPROFILE_KERNEL checks for ppc
  kbuild: rebuild GCC plugins when the compiler is upgraded
  kbuild: Fix ld-version.sh script if LLD was built with LLD_VENDOR
  kbuild: dummy-tools: fix inverted tests for gcc
  kbuild: add image_name to no-sync-config-targets

commit 0d835962 ("zram: support page writeback") introduced two
problems.  It overwrites writeback_store's return value as kstrtol's
return value, which makes return value zero so user could see zero as
return value of write syscall even though it wrote data successfully.

It also breaks index value in the loop in that it doesn't increase the
index any longer.  It means it can write only first starting block index
so user couldn't write all idle pages in the zram so lose memory saving
chance.

This patch fixes those issues.

Link: https://lkml.kernel.org/r/20210312173949.2197662-2-minchan@kernel.org
Fixes: 0d835962("zram: support page writeback")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Amos Bianchi <amosbianchi@google.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: John Dias <joaodias@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

writeback_store's return value is overwritten by submit_bio_wait's return
value.  Thus, writeback_store will return zero since there was no IO
error.  In the end, write syscall from userspace will see the zero as
return value, which could make the process stall to keep trying the write
until it will succeed.

Link: https://lkml.kernel.org/r/20210312173949.2197662-1-minchan@kernel.org
Fixes: 3b82a051("drivers/block/zram/zram_drv.c: fix error return codes not being returned in writeback_store")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: John Dias <joaodias@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As described in the split_page() comment, for the non-compound high order
page, the sub-pages must be freed individually.  If the memcg of the first
page is valid, the tail pages cannot be uncharged when be freed.

For example, when alloc_pages_exact is used to allocate 1MB continuous
physical memory, 2MB is charged(kmemcg is enabled and __GFP_ACCOUNT is
set).  When make_alloc_exact free the unused 1MB and free_pages_exact free
the applied 1MB, actually, only 4KB(one page) is uncharged.

Therefore, the memcg of the tail page needs to be set when splitting a
page.

Michel:

There are at least two explicit users of __GFP_ACCOUNT with
alloc_exact_pages added recently.  See 7efe8ef2 ("KVM: arm64:
Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT") and c4196218
("KVM: s390: Add memcg accounting to KVM allocations"), so this is not
just a theoretical issue.

Link: https://lkml.kernel.org/r/20210304074053.65527-3-zhouguanghui1@huawei.comSigned-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Weilong Chen <chenweilong@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>