Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@redhat.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@redhat.com>

This enhances the network simulation scheduler to do simple random loss.

The loss parameter is a simple 32 bit value such that 0 means no loss, and
0xffffffff is always drop.  I have a new version of the tc command which takes
care of conversion from percent to this value.

Same patch for 2.4 and 2.6
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@redhat.com>

Based upon a patch from Stephen Hemminger.
Signed-off-by: David S. Miller <davem@redhat.com>

If delay scheduler decides not to send the packet right away, it requeues
it.  If the requeue fails, it should go and look again rather than waking
up prematurely.

Same patch should apply to both 2.6 and 2.4
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@redhat.com>

If underlying fifo enqueue fails, return the status not 0.
Same patch should apply to both 2.6 and 2.4
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@redhat.com>

The whole effort to avoid hotplug was misguided.  If it is really a problem
(which it doesn't appear to be) then it can more easily be addressed by smarter
hotplug scripts in user space.

This patch gets rid of the whole subsystem hack for bridge kobjects.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@redhat.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This is a fix for when we encounter an alias during insert. When that
happens we move the request to dispatch, but it may happen that this
request is also the ->last_merge hint. So we may attempt to merge with
this later, when it's either in progress or already freed. Rearrange the
logic a bit so we clear the merge hint there as well. It looks more
complex than it is, the only real code change is the addition of a
cfq_remove_merge_hints() in cfq_dispatch_sort().
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It's possible under unlucky circumstances for this race to trigger. I
described it with a comment in the code.
Signed-Off-By: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This makes the CFQ tunables available in sysfs, like AS and deadline.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Noted by Alexey Dobriyan.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This cset adds the code to handle the hardware vector floating point
unit found on some ARM926 and later CPUs.  The hardware provides
an implementation for the common cases, and bounces exceptions for
other cases, which have to be handled in software, and signalling
SIGFPE as appropriate.

Remove unused queued_signals global accounting.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a user_struct pointer to the sigqueue structure.  Charge sigqueue
allocation and destruction to the user_struct rather than a global pool.  This
per user rlimit accounting obsoletes the global queued_signals accouting.

The patch as charges the sigqueue struct allocation to the queue that it's
pending on (the receiver of the signal).  So the owner of the queue is charged
for whoever writes to it (much like quota for a 777 file).

The patch started out charging the task which allocated the sigqueue struct.
In most cases, these are always the same user (permission for sending a
signal), so those cases are moot.  In the cases where it isn't the same user,
it's a privileged user sending a signal to another user.

It seems wrong to charge the allocation to the privleged user, when the other
user could block receipt as long as it feels.  The flipside is, someone else
can fill your queue (expectation is that someone else is privileged).  I think
it's right the way it is.  The change to revert is very small.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Update send_signal() api to allow passing the task receiving the signal.  This
is necessary to ensure signals generated out of process context can be charged
to the correct user.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The cmpci driver included in Linux 2.6.7 causes an oops on rmmod, I believe
cm_remove should be marked __devexit rather than __devinit.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- optimize byteswap
- add noswap io mode
- cleanup var type
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- Kconfig typo fix
- PTRACE_PEEKUSER read process info support
- exr restore fix
- ptrace register offset fix
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Several scheduler macros only read from the task struct, mark them const.
It may help the compiler generate better code.
Signed-off-by: Keith Owens <kaos@ocs.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Distros have started to ship kernels with this patch, as it seems that some
unnamed binary module authors are already abusing this function (as well as
some open source modules, like the openib code.) I could not find any valid
reason why this symbol should be exported, so here's a patch against 2.6.7
that removes it.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Delete a blank line for more error reporting on-screen.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Hit a bug check when unmap a hugetlb vma in PAE mode on i386 (and x86-64).

 Bad page state at free_hot_cold_page (in process 'a.out', page c165cc40)
 flags:0x20000000 mapping:f75e1d00 mapped:0 count:0
 Backtrace:
 Call Trace:
  [<c0133e0d>] bad_page+0x79/0x9e
  [<c0134550>] free_hot_cold_page+0x71/0xfa
  [<c0115d60>] unmap_hugepage_range+0xa3/0xbf
  [<c013d375>] unmap_vmas+0xac/0x252
  [<c0117691>] default_wake_function+0x0/0xc
  [<c0140bea>] unmap_region+0xd8/0x145
  [<c0140f2d>] do_munmap+0xfc/0x14d
  [<c01b8a56>] sys_shmdt+0xa5/0x126
  [<c010a2ad>] sys_ipc+0x23c/0x27f
  [<c014a85e>] sys_write+0x38/0x59
  [<c0103e1b>] syscall_call+0x7/0xb

It turns out there is a bug in hugetlb_prefault(): with 3 level page table,
huge_pte_alloc() might return a pmd that points to a PTE page.  It happens
if the virtual address for hugetlb mmap is recycled from previously used
normal page mmap.  free_pgtables() might not scrub the pmd entry on munmap
and hugetlb_prefault skips on any pmd presence regardless what type it is. 
Patch to fix the bug.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes some problems with handling of channel detection in the
driver.  Some systems that are IPMI 1.5 do not implement the channel query
command.  Also, the interface has to be fully up before the command is
ready.

This patch also adds a polling interface; this is required for situations
where interrupts are not running, but the system must still issue IPMI
commands, like when taking a crash dump.

It also updates the driver version to v32.
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch contains SELinux changes which add support for extended Netlink
socket classes and the associated permissions nlmsg_read and nlmsg_write.

Cc: David S. Miller <davem@redhat.com>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Modifies the LSM netlink_send() hook so that it takes a struct sock parameter.
 SELinux will use this parameter to lookup the class of socket, which was
assigned during socket security initialization.

Cc: David S. Miller <davem@redhat.com>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch moves the security_netlink_send() LSM hook after the user copy, so
that LSM modules can safely examine skb payload content.  For SELinux, we need
to look at the Netlink message type.

Cc: David S. Miller <davem@redhat.com>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch regenerates the SELinux module headers to reflect new class and
access vectors definitions.  The size of the diff is misleading; much of it is
simply a change in the ordering of the automatically generated definitions.
The corresponding generation script has been changed to ensure a stable order
in the future.  Please apply.

Author: Stephen Smalley <sds@epoch.ncsc.mil>
Cc: David S. Miller <davem@redhat.com>
Signed-off-by: Stephen Smalley <sds@epoch.ncsc.mil>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I know it's simple_strtoul, but is it meant to be that simple?  Fix up for
both simple_strtoul and simple_strtoull.

simple_strtoul(0x401b, NULL, 0) = 0x401b
simple_strtoul(0X401b, NULL, 0) = 0x0
simple_strtoul(0x401b, NULL, 16) = 0x0
simple_strtoul(0X401b, NULL, 16) = 0x0

simple_strtoull(0x401b, NULL, 0) = 0x401b
simple_strtoull(0X401b, NULL, 0) = 0x0
simple_strtoull(0x401b, NULL, 16) = 0x0
simple_strtoull(0X401b, NULL, 16) = 0x0
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here's the fb accel capabilities patch for rivafb.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>