- 22 Apr, 2017 40 commits
-
-
Benjamin Herrenschmidt authored
commit 7ed23e1b upstream. On Power8 & Power9 the early CPU inititialisation in __init_HFSCR() turns on HFSCR[TM] (Hypervisor Facility Status and Control Register [Transactional Memory]), but that doesn't take into account that TM might be disabled by CPU features, or disabled by the kernel being built with CONFIG_PPC_TRANSACTIONAL_MEM=n. So later in boot, when we have setup the CPU features, clear HSCR[TM] if the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account for the CONFIG_PPC_TRANSACTIONAL_MEM=n case. Without this a KVM guest might try use TM, even if told not to, and cause an oops in the host kernel. Typically the oops is seen in __kvmppc_vcore_entry() and may or may not be fatal to the host, but is always bad news. In practice all shipping CPU revisions do support TM, and all host kernels we are aware of build with TM support enabled, so no one should actually be able to hit this in the wild. Fixes: 2a3563b0 ("powerpc: Setup in HFSCR for POWER8") Cc: stable@vger.kernel.org # v3.10+ Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Rewrite change log with input from Sam, add Fixes/stable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [sb: Backported to linux-4.4.y: adjusted context] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minchan Kim authored
commit d72e9a7a upstream. The copy_page is optimized memcpy for page-alinged address. If it is used with non-page aligned address, it can corrupt memory which means system corruption. With zram, it can happen with 1. 64K architecture 2. partial IO 3. slub debug Partial IO need to allocate a page and zram allocates it via kmalloc. With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned address. And finally, copy_page(mem, cmem) corrupts memory. So, this patch changes it to memcpy. Actuaully, we don't need to change zram_bvec_write part because zsmalloc returns page-aligned address in case of PAGE_SIZE class but it's not good to rely on the internal of zsmalloc. Note: When this patch is merged to stable, clear_page should be fixed, too. Unfortunately, recent zram removes it by "same page merge" feature so it's hard to backport this patch to -stable tree. I will handle it when I receive the mail from stable tree maintainer to merge this patch to backport. Fixes: 42e99bd9 ("zram: optimize memory operations with clear_page()/copy_page()") Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.orgSigned-off-by:
Minchan Kim <minchan@kernel.org> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Richard Genoud authored
commit 31ca2c63 upstream. If uart_flush_buffer() is called between atmel_tx_dma() and atmel_complete_tx_dma(), the circular buffer has been cleared, but not atmel_port->tx_len. That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE - atmel_port->tx_len) bytes). Tested-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
-
Horia Geantă authored
commit 40c98cb5 upstream. RNG instantiation was previously fixed by commit 62743a41 ("crypto: caam - fix RNG init descriptor ret. code checking") while deinstantiation was not addressed. Since the descriptors used are similar, in the sense that they both end with a JUMP HALT command, checking for errors should be similar too, i.e. status code 7000_0000h should be considered successful. Fixes: 1005bccd ("crypto: caam - enable instantiation of all RNG4 state handles") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ankur Arora authored
commit 1914f0cd upstream. This was broken in commit cd979883 ("xen/acpi-processor: fix enabling interrupts on syscore_resume"). do_suspend (from xen/manage.c) and thus xen_resume_notifier never get called on the initial-domain at resume (it is if running as guest.) The rationale for the breaking change was that upload_pm_data() potentially does blocking work in syscore_resume(). This patch addresses the original issue by scheduling upload_pm_data() to execute in workqueue context. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Based-on-patch-by:
Konrad Wilk <konrad.wilk@oracle.com> Reviewed-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Ankur Arora <ankur.a.arora@oracle.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
John Garry authored
commit 9702c67c upstream. The total ata xfer length may not be calculated properly, in that we do not use the proper method to get an sg element dma length. According to the code comment, sg_dma_len() should be used after dma_map_sg() is called. This issue was found by turning on the SMMUv3 in front of the hisi_sas controller in hip07. Multiple sg elements were being combined into a single element, but the original first element length was being use as the total xfer length. Fixes: ff2aeb1e ("libata: convert to chained sg") Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
peter chang authored
commit bf33f87d upstream. The user can control the size of the next command passed along, but the value passed to the ioctl isn't checked against the usable max command size. Signed-off-by:
Peter Chang <dpf@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Chris Leech authored
commit 6f8830f5 upstream. There's a rather long standing regression from the commit "libiscsi: Reduce locking contention in fast path" Depending on iSCSI target behavior, it's possible to hit the case in iscsi_complete_task where the task is still on a pending list (!list_empty(&task->running)). When that happens the task is removed from the list while holding the session back_lock, but other task list modification occur under the frwd_lock. That leads to linked list corruption and eventually a panicked system. Rather than back out the session lock split entirely, in order to try and keep some of the performance gains this patch adds another lock to maintain the task lists integrity. Major enterprise supported kernels have been backing out the lock split for while now, thanks to the efforts at IBM where a lab setup has the most reliable reproducer I've seen on this issue. This patch has been tested there successfully. Signed-off-by:
Chris Leech <cleech@redhat.com> Fixes: 659743b0 ("[SCSI] libiscsi: Reduce locking contention in fast path") Reported-by:
Prashantha Subbarao <psubbara@us.ibm.com> Reviewed-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
commit 85e8a239 upstream. We see lpfc devices regularly fail during kexec. Fix this by adding a shutdown method which mirrors the remove method. Signed-off-by:
Anton Blanchard <anton@samba.org> Reviewed-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Tested-by:
-
Nicholas Bellinger authored
commit a04e54f2 upstream. The following fixes a divide by zero OOPs with TYPE_TAPE due to pscsi_tape_read_blocksize() failing causing a zero sd->sector_size being propigated up via dev_attrib.hw_block_size. It also fixes another long-standing bug where TYPE_TAPE and TYPE_MEDIMUM_CHANGER where using pscsi_create_type_other(), which does not call scsi_device_get() to take the device reference. Instead, rename pscsi_create_type_rom() to pscsi_create_type_nondisk() and use it for all cases. Finally, also drop a dump_stack() in pscsi_get_blocks() for non TYPE_DISK, which in modern target-core can get invoked via target_sense_desc_format() during CHECK_CONDITION. Reported-by:
Malcolm Haak <insanemal@gmail.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Michael Ellerman authored
commit 97ee351b upstream. Recent toolchains force the TOC to be 256 byte aligned. We need to enforce this alignment in the zImage linker script, otherwise pointers to our TOC variables (__toc_start) could be incorrect. If the actual start of the TOC and __toc_start don't have the same value we crash early in the zImage wrapper. Suggested-by:
Alan Modra <amodra@gmail.com> Signed-off-by:
-
Paul Mackerras authored
commit 48fe9e94 upstream. In the past, there was only one load-with-reservation instruction, lwarx, and if a program attempted a lwarx on a misaligned address, it would take an alignment interrupt and the kernel handler would emulate it as though it was lwzx, which was not really correct, but benign since it is loading the right amount of data, and the lwarx should be paired with a stwcx. to the same address, which would also cause an alignment interrupt which would result in a SIGBUS being delivered to the process. We now have 5 different sizes of load-with-reservation instruction. Of those, lharx and ldarx cause an immediate SIGBUS by luck since their entries in aligninfo[] overlap instructions which were not fixed up, but lqarx overlaps with lhz and will be emulated as such. lbarx can never generate an alignment interrupt since it only operates on 1 byte. To straighten this out and fix the lqarx case, this adds code to detect the l[hwdq]arx instructions and return without fixing them up, resulting in a SIGBUS being delivered to the process. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Frederic Barrat authored
commit 88b1bf72 upstream. Commit 4c6d9acc ("powerpc/mm: Add hooks for cxl") converted local TLB invalidates to global if the cxl driver is active. This is necessary because the CAPP snoops invalidations to forward them to the PSL on the cxl adapter. However one path was forgotten. native_flush_hash_range() still does local TLB invalidates, as found out the hard way recently. This patch fixes it by following the same logic as previously: if the cxl driver is active, the local TLB invalidates are 'upgraded' to global. Fixes: 4c6d9acc ("powerpc/mm: Add hooks for cxl") Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Takashi Iwai authored
commit 2d7d5400 upstream. When a new event is queued while processing to resize the FIFO in snd_seq_fifo_clear(), it may lead to a use-after-free, as the old pool that is being queued gets removed. For avoiding this race, we need to close the pool to be deleted and sync its usage before actually deleting it. The issue was spotted by syzkaller. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit c520ff3d upstream. When snd_seq_pool_done() is called, it marks the closing flag to refuse the further cell insertions. But snd_seq_pool_done() itself doesn't clear the cells but just waits until all cells are cleared by the caller side. That is, it's racy, and this leads to the endless stall as syzkaller spotted. This patch addresses the racy by splitting the setup of pool->closing flag out of snd_seq_pool_done(), and calling it properly before snd_seq_pool_done(). BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.comReported-and-tested-by:
-
Uwe Kleine-König authored
commit 3bd32722 upstream. On some QNAP NAS devices the rtc can wake the machine. Several people noticed that once the machine was woken this way it fails to shut down. That's because the driver fails to acknowledge the interrupt and so it keeps active and restarts the machine immediatly after shutdown. See https://bugs.debian.org/794266 for a bug report. Doing this correctly requires to interpret the INT2 flag of the first read of the STATUS1 register because this bit is cleared by read. Note this is not maximally robust though because a pending irq isn't detected when the STATUS1 register was already read (and so INT2 is not set) but the irq was not disabled. But that is a hardware imposed problem that cannot easily be fixed by software. Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 8e6583f1 upstream. There were two deviations from the reference manual: you have to wait half a second when POC is active and you might have to repeat initialization when POC or BLD are still set after the sequence. Note however that as POC and BLD are cleared by read the driver might not be able to detect that a reset is necessary. I don't have a good idea how to fix this. Additionally report the value read from STATUS1 to the caller. This prepares the next patch. Signed-off-by:
-
Uwe Kleine-König authored
commit fdd4bc93 in 4.4-stable. The rtc core calls the .read_alarm with all fields initialized to 0. As the s35390a driver doesn't touch some fields the returned date is interpreted as a date in January 1900. So make sure all fields are set to -1; some of them are then overwritten with the right data depending on the hardware state. In mainline this is done by commit d68778b8 ("rtc: initialize output parameter for read alarm to "uninitialized"") in the core. This is considered to dangerous for stable as it might have side effects for other rtc drivers that might for example rely on alarm->time.tm_sec being initialized to 0. Signed-off-by:
-
Uwe Kleine-König authored
commit f87e904d upstream. There are several issues fixed in this patch: - When alarm isn't enabled, set .enabled to zero instead of returning -EINVAL. - Ignore how IRQ1 is configured when determining if IRQ2 is on. - The three alarm registers have an enable flag which must be evaluated. - The chip always triggers when the seconds register gets 0. Note that the rtc framework however doesn't handle the result correctly because it doesn't check wday being initialized and so interprets an alarm being set for 10:00 AM in three days as 10:00 AM tomorrow (or today if that's not over yet). Signed-off-by:
-
Vitaly Kuznetsov authored
commit 77c0c973 upstream. When we iterate through all HA regions in handle_pg_range() we have an assumption that all these regions are sorted in the list and the 'start_pfn >= has->end_pfn' check is enough to find the proper region. Unfortunately it's not the case with WS2016 where host can hot-add regions in a different order. We end up modifying the wrong HA region and crashing later on pages online. Modify the check to make sure we found the region we were searching for while iterating. Fix the same check in pfn_covered() as well. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
bsegall@google.com authored
commit 5402e97a upstream. In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against __TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end of a PTRACE_LISTEN, this can wake the task /after/ the check against __TASK_TRACED, but before the reset of state to TASK_TRACED. This causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup against TRACED while the task is still on the rq wake_list, corrupting it. Oleg said: "The kernel can crash or this can lead to other hard-to-debug problems. In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced() assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the contract. Obviusly it is very wrong to manipulate task->state if this task is already running, or WAKING, or it sleeps again" [akpm@linux-foundation.org: coding-style fixes] Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL") Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.comSigned-off-by:
Ben Segall <bsegall@google.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Jan-Marek Glogowski authored
commit 806a28ef upstream. Currently the cifs module breaks the CIFS specs on reconnect as described in http://msdn.microsoft.com/en-us/library/cc246529.aspx: "TreeId (4 bytes): Uniquely identifies the tree connect for the command. This MUST be 0 for the SMB2 TREE_CONNECT Request." Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Tested-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Heiko Carstens authored
commit d09c5373 upstream. Commit fd2d2b19 ("s390: get_user() should zero on failure") intended to fix s390's get_user() implementation which did not zero the target operand if the read from user space faulted. Unfortunately the patch has no effect: the corresponding inline assembly specifies that the operand is only written to ("=") and the previous value is discarded. Therefore the compiler is free to and actually does omit the zero initialization. To fix this simply change the contraint modifier to "+", so the compiler cannot omit the initialization anymore. Fixes: c9ca7841 ("s390/uaccess: provide inline variants of get_user/put_user") Fixes: fd2d2b19 ("s390: get_user() should zero on failure") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Marcelo Henrique Cerri authored
commit d82c0d12 upstream. Reorder the operations in decompress_kernel() to ensure initrd is moved to a safe location before the bss section is zeroed. During decompression bss can overlap with the initrd and this can corrupt the initrd contents depending on the size of the compressed kernel (which affects where the initrd is placed by the bootloader) and the size of the bss section of the decompressor. Also use the correct initrd size when checking for overlaps with parmblock. Fixes: 06c0dd72 ([S390] fix boot failures with compressed kernels) Reviewed-by:
Joy Latten <joy.latten@canonical.com> Reviewed-by:
Vineetha HariPai <vineetha.hari.pai@canonical.com> Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
-
Dave Martin authored
commit 7195ee31 upstream. It's not clear what behaviour is sensible when doing partial write of NT_METAG_RPIPE, so just don't bother. This patch assumes that userspace will never rely on a partial SETREGSET in this case, since it's not clear what should happen anyway. Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Dave Martin authored
commit 5fe81fe9 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill TXSTATUS, a well-defined default value is used, based on the task's current value. Suggested-by:
-
Dave Martin authored
commit a78ce80d upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
-
Dave Martin authored
commit d3805c54 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dave Martin authored
commit d614fd58 upstream. Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Signed-off-by:
-
Dave Martin authored
commit fb411b83 upstream. gpr_set won't work correctly and can never have been tested, and the correct behaviour is not clear due to the endianness-dependent task layout. So, just remove it. The core code will now return -EOPNOTSUPPORT when trying to set NT_PRSTATUS on this architecture until/unless a correct implementation is supplied. Signed-off-by:
-
Li Qiang authored
commit e7e11f99 upstream. In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the 'req->mip_levels' array. This array can be assigned any value from the user space. As both the 'num_sizes' and the array is uint32_t, it is easy to make 'num_sizes' overflow. The later 'mip_levels' is used as the loop count. This can lead an oob write. Add the check of 'req->mip_levels' to avoid this. Signed-off-by:
Li Qiang <liqiang6-s@360.cn> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 53e16798 upstream. The mesa winsys sometimes uses unimplemented parameter requests to check for features. Remove the error message to avoid bloating the kernel log. Signed-off-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit fe25deb7 upstream. Previously, when a surface was opened using a legacy (non prime) handle, it was verified to have been created by a client in the same master realm. Relax this so that opening is also allowed recursively if the client already has the surface open. This works around a regression in svga mesa where opening of a shared surface is used recursively to obtain surface information. Signed-off-by:
-
Murray McAllister authored
commit 63774069 upstream. In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()), which can leak useful addresses to dmesg. Add check to avoid a size of 0. Signed-off-by:
Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by:
-
Murray McAllister authored
commit 36274ab8 upstream. Before memory allocations vmw_surface_define_ioctl() checks the upper-bounds of a user-supplied size, but does not check if the supplied size is 0. Add check to avoid NULL pointer dereferences. Signed-off-by:
-
Thomas Hellstrom authored
commit f7652afa upstream. A malicious caller could otherwise hand over handles to other objects causing all sorts of interesting problems. Testing done: Ran a Fedora 25 desktop using both Xorg and gnome-shell/Wayland. Signed-off-by:
-
Paolo Bonzini authored
commit 06ce521a upstream. handle_vmon gets a reference on VMXON region page, but does not release it. Release the reference. Found by syzkaller; based on a patch by Dmitry. Reported-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.16: use skip_emulated_instruction()] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Amit Pundir authored
This reverts commit dbcfee72 which is commit be95485a upstream. Upstream commit be95485a (ARM: 8457/1: psci-smp is built only for SMP) was intended to fix the build error for configs with CONFIG_SMP=n and CONFIG_ARM_PSCI=y, but it end up introducing a build error when cherry-picked on 3.18.y. This patch resulted in redefinition of psci_init() and broke the build for every build config in 3.18.y with CONFIG_SMP=n and CONFIG_ARM_PSCI=y. Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Max Bires authored
commit f2cfa58b upstream. Without a bool string present, using "# CONFIG_DEVPORT is not set" in defconfig files would not actually unset devport. This esnured that /dev/port was always on, but there are reasons a user may wish to disable it (smaller kernel, attack surface reduction) if it's not being used. Adding a message here in order to make this user visible. Signed-off-by:
Max Bires <jbires@google.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Geert Uytterhoeven authored
commit 309124e2 upstream. According to full-history-linux commit d3794f4fa7c3edc3 ("[PATCH] M68k update (part 25)"), port operations are allowed on m68k if CONFIG_ISA is defined. However, commit 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support") accidentally changed an "||" into an "&&", disabling it completely on m68k. This logic was retained when introducing the DEVPORT symbol in commit 4f911d64 ("Make /dev/port conditional on config symbol"). Drop the bogus dependency on !M68K to fix this. Fixes: 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Al Stone <ahs3@redhat.com> Signed-off-by:
-
