- 12 Apr, 2016 40 commits
-
-
Josh Boyer authored
commit 9c6ba456 upstream. The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 7445e45d upstream. SPC 880NC PC camera discussions: http://www.pclinuxos.com/forum/index.php/topic,135688.0.htmlReported-by:
Kikim <klucznik0@op.pl> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Bjørn Mork authored
commit d48d5691 upstream. Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Josh Boyer authored
commit ea6db90e upstream. A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> Signed-off-by:
-
Martyn Welch authored
commit cddc9434 upstream. The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by:
Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by:
-
Oliver Neukum authored
commit c55aee1b upstream. An attack using missing endpoints exists. CVE-2016-3137 Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Oliver Neukum authored
commit 5a07975a upstream. The driver can be crashed with devices that expose crafted descriptors with too few endpoints. See: http://seclists.org/bugtraq/2016/Mar/61Signed-off-by:
-
Oliver Neukum authored
commit 4e9a0b05 upstream. An attack using the lack of sanity checking in probe is known. This patch checks for the existence of a second port. CVE-2016-3136 Signed-off-by:
-
Oliver Neukum authored
commit 0b818e39 upstream. Attacks that trick drivers into passing a NULL pointer to usb_driver_claim_interface() using forged descriptors are known. This thwarts them by sanity checking. Signed-off-by:
-
Josh Boyer authored
commit 4ec0ef3a upstream. The iowarrior driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. The full report of this issue can be found here: http://seclists.org/bugtraq/2016/Mar/87Reported-by:
-
Oliver Neukum authored
commit 8835ba4a upstream. An attack has become available which pretends to be a quirky device circumventing normal sanity checks and crashes the kernel by an insufficient number of interfaces. This patch adds a check to the code path for quirky devices. Signed-off-by:
-
Hans de Goede authored
commit 55ff8cfb upstream. The uas driver can never queue more then MAX_CMNDS (- 1) tags and tags are shared between luns, so there is no need to claim that we can_queue some random large number. Not claiming that we can_queue 65536 commands, fixes the uas driver failing to initialize while allocating the tag map with a "Page allocation failure (order 7)" error on systems which have been running for a while and thus have fragmented memory. Reported-and-tested-by:
Yves-Alexis Perez <corsac@corsac.net> Signed-off-by:
-
Oliver Neukum authored
commit 0d5ce778 upstream. A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by:
-
Oliver Neukum authored
commit 264904cc upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.htmlSigned-off-by:
-
Bryn M. Reeves authored
commit 98dbc9c6 upstream. An "old" (.request_fn) DM 'struct request' stores a pointer to the associated 'struct dm_rq_target_io' in rq->special. dm_requeue_original_request(), previously named dm_requeue_unmapped_original_request(), called dm_unprep_request() to reset rq->special to NULL. But rq_end_stats() would go on to hit a NULL pointer deference because its call to tio_from_request() returned NULL. Fix this by calling rq_end_stats() _before_ dm_unprep_request() Signed-off-by:
Bryn M. Reeves <bmr@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Fixes: e262f347 ("dm stats: add support for request-based DM devices") Signed-off-by:
-
Joe Thornber authored
commit d14fcf3d upstream. Otherwise operations may be attempted that will only ever go on to crash (since the metadata device is either missing or unreliable if 'fail_io' is set). Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 2eae9e44 upstream. If a transaction abort has failed then we can no longer use the metadata device. Typically this happens if the superblock is unreadable. This fix addresses a crash seen during metadata device failure testing. Fixes: 8a01a6af ("dm thin: prefetch missing metadata pages") Signed-off-by:
-
Mike Snitzer authored
commit 6acfe68b upstream. Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower than if an underlying null_blk device were used directly. One of the reasons for this drop in performance is that blk_insert_clone_request() was calling blk_mq_insert_request() with @async=true. This forced the use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues which ushered in ping-ponging between process context (fio in this case) and kblockd's kworker to submit the cloned request. The ftrace function_graph tracer showed: kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to _not_ use kblockd to submit the cloned requests isn't enough to eliminate the observed context switches. In addition to this dm-mq specific blk-core fix, there are 2 DM core fixes to dm-mq that (when paired with the blk-core fix) completely eliminate the observed context switching: 1) don't blk_mq_run_hw_queues in blk-mq request completion Motivated by desire to reduce overhead of dm-mq, punting to kblockd just increases context switches. In my testing against a really fast null_blk device there was no benefit to running blk_mq_run_hw_queues() on completion (and no other blk-mq driver does this). So hopefully this change doesn't induce the need for yet another revert like commit 621739b0 ! 2) use blk_mq_complete_request() in dm_complete_request() blk_complete_request() doesn't offer the traditional q->mq_ops vs .request_fn branching pattern that other historic block interfaces do (e.g. blk_get_request). Using blk_mq_complete_request() for blk-mq requests is important for performance. It should be noted that, like blk_complete_request(), blk_mq_complete_request() doesn't natively handle partial completions -- but the request-based DM-multipath target does provide the required partial completion support by dm.c:end_clone_bio() triggering requeueing of the request via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE. dm-mq fix #2 is _much_ more important than #1 for eliminating the context switches. Before: cpu : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475 After: cpu : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472 With these changes multithreaded async read IOPs improved from ~950K to ~1350K for this dm-mq stacked on null_blk test-case. The raw read IOPs of the underlying null_blk device for the same workload is ~1950K. Fixes: 7fb4898e ("block: add blk-mq support to blk_insert_cloned_request()") Fixes: bfebd1cd ("dm: add full blk-mq support to request-based DM") Reported-by:
Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
DingXiang authored
commit 4df2bf46 upstream. Otherwise loading a "snapshot" table using the same device for the origin and COW devices, e.g.: echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap will trigger: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 1958.979934] IP: [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1958.989655] PGD 0 [ 1958.991903] Oops: 0000 [#1] SMP ... [ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G IO 4.5.0-rc5.snitm+ #150 ... [ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000 [ 1959.091865] RIP: 0010:[<ffffffffa040efba>] [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.104295] RSP: 0018:ffff88032a957b30 EFLAGS: 00010246 [ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00 [ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001 [ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80 [ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80 [ 1959.150021] FS: 00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000 [ 1959.159047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0 [ 1959.173415] Stack: [ 1959.175656] ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc [ 1959.183946] ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000 [ 1959.192233] ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf [ 1959.200521] Call Trace: [ 1959.203248] [<ffffffffa040f225>] dm_exception_store_create+0x1d5/0x240 [dm_snapshot] [ 1959.211986] [<ffffffffa040d310>] snapshot_ctr+0x140/0x630 [dm_snapshot] [ 1959.219469] [<ffffffffa0005c44>] ? dm_split_args+0x64/0x150 [dm_mod] [ 1959.226656] [<ffffffffa0005ea7>] dm_table_add_target+0x177/0x440 [dm_mod] [ 1959.234328] [<ffffffffa0009203>] table_load+0x143/0x370 [dm_mod] [ 1959.241129] [<ffffffffa00090c0>] ? retrieve_status+0x1b0/0x1b0 [dm_mod] [ 1959.248607] [<ffffffffa0009e35>] ctl_ioctl+0x255/0x4d0 [dm_mod] [ 1959.255307] [<ffffffff813304e2>] ? memzero_explicit+0x12/0x20 [ 1959.261816] [<ffffffffa000a0c3>] dm_ctl_ioctl+0x13/0x20 [dm_mod] [ 1959.268615] [<ffffffff81215eb6>] do_vfs_ioctl+0xa6/0x5c0 [ 1959.274637] [<ffffffff81120d2f>] ? __audit_syscall_entry+0xaf/0x100 [ 1959.281726] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 1959.288814] [<ffffffff81216449>] SyS_ioctl+0x79/0x90 [ 1959.294450] [<ffffffff8167e4ae>] entry_SYSCALL_64_fastpath+0x12/0x71 ... [ 1959.323277] RIP [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.333090] RSP <ffff88032a957b30> [ 1959.336978] CR2: 0000000000000098 [ 1959.344121] ---[ end trace b049991ccad1169e ]--- Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899Signed-off-by:
Ding Xiang <dingxiang@huawei.com> Signed-off-by:
-
Jerry Hoemann authored
commit 07accfa9 upstream. Code attempts to prevent certain IOCTL DSM from being called when device is opened read only. This security feature can be trivially overcome by changing the size portion of the ioctl_command which isn't used. Check only the _IOC_NR (i.e. the command). Signed-off-by:
Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Alan authored
commit 5a51a7ab upstream. We were setting the queue depth correctly, then setting it back to two. If you hit this as a bisection point then please send me an email as it would imply we've been hiding other bugs with this one. Signed-off-by:
Alan Cox <alan@linux.intel.com> Reviewed-by:
Hannes Reinicke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Maurizio Lombardi authored
commit 84bd6499 upstream. In beiscsi_setup_boot_info(), the boot_kset pointer should be set to NULL in case of failure otherwise an invalid pointer dereference may occur later. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit ff06c5ff upstream. Commit 3209f9d7 ("scsi: storvsc: Fix a bug in the handling of SRB status flags") filtered SRB_STATUS_AUTOSENSE_VALID out effectively making the (SRB_STATUS_ABORTED | SRB_STATUS_AUTOSENSE_VALID) case a dead code. The logic from this branch (e.g. storvsc_device_scan() call) is still required, fix the check. Fixes: 3209f9d7 ("scsi: storvsc: Fix a bug in the handling of SRB status flags") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Martin K. Petersen authored
commit 6540a65d upstream. Commit 39773722 ("sd: Make discard granularity match logical block size when LBPRZ=1") accidentally set the granularity to one byte instead of one logical block on devices that provide deterministic zeroes after UNMAP. Signed-off-by:
Ewan Milne <emilne@redhat.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Fixes: 39773722Signed-off-by:
-
Raghava Aditya Renukunta authored
commit ecc479e0 upstream. During EEH recovery number of online CPU's might change thereby changing the number of MSIx vectors. Since each fib is allocated to a vector, changes in the number of vectors causes fib to be sent thru invalid vectors.In addition the correct number of MSIx vectors is not updated in the INIT struct sent to the controller, when it is reinitialized. Fixed by reassigning vectors to fibs based on the updated number of MSIx vectors and updating the INIT structure before sending to controller. Fixes: MSI-X vector calculation for suspend/resume Signed-off-by:
Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com> Reviewed-by:
Shane Seymour <shane.seymour@hpe.com> Reviewed-by:
Johannes Thumshirn <jthushirn@suse.de> Signed-off-by:
-
Raghava Aditya Renukunta authored
commit f88fa79a upstream. aac_fib_map_free() calls pci_free_consistent() without checking that dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they are indeed NULL/0, this will result in a hang as pci_free_consistent() will attempt to invalidate cache for the entire 64-bit address space (which would take a very long time). Fixed by adding a check to make sure that dev->hw_fib_va and dev->max_fib_size are not NULL and 0 respectively. Fixes: 9ad5204d - "[SCSI]aacraid: incorrect dma mapping mask during blinked recover or user initiated reset" Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
commit 3f4ce057 upstream. The driver utilizes an array of atomic variables to keep track of IO submissions to each vector. To submit an IO multiple threads iterate through the array to find a vector which has empty slots to send an IO. The reading and updating of the variable is not atomic, causing race conditions when a thread uses a full vector to submit an IO. Fixed by mapping each FIB to a vector, the submission path then uses said vector to submit IO thereby removing the possibly of a race condition.The vector assignment is started from 1 since vector 0 is reserved for the use of AIF management FIBS.If the number of MSIx vectors is 1 (MSI or INTx mode) then all the fibs are allocated to vector 0. Fixes: 495c0217 "aacraid: MSI-x support" Signed-off-by:
-
Douglas Gilbert authored
commit 5ecee0a3 upstream. One of the strange things that the original sg driver did was let the user provide both a data-out buffer (it followed the sg_header+cdb) _and_ specify a reply length greater than zero. What happened was that the user data-out buffer was copied into some kernel buffers and then the mid level was told a read type operation would take place with the data from the device overwriting the same kernel buffers. The user would then read those kernel buffers back into the user space. From what I can tell, the above action was broken by commit fad7f01e ("sg: set dxferp to NULL for READ with the older SG interface") in 2008 and syzkaller found that out recently. Make sure that a user space pointer is passed through when data follows the sg_header structure and command. Fix the abnormal case when a non-zero reply_len is also given. Fixes: fad7f01eSigned-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
Nadav Amit authored
commit 18c98243 upstream. TLB_REMOTE_SEND_IPI was recently introduced, but it counts bytes instead of pages. In addition, it does not report correctly the case in which flush_tlb_page flushes a page. Fix it to be consistent with other TLB counters. Fixes: 5b74283a ("x86, mm: trace when an IPI is about to be sent") Signed-off-by:
Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit c29016cf upstream. iopl(3) is supposed to work if iopl is already 3, even if unprivileged. This didn't work right on Xen PV. Fix it. Reviewewd-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8ce12013e6e4c0a44a97e316be4a6faff31bd5ea.1458162709.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit b7a58459 upstream. On Xen PV, regs->flags doesn't reliably reflect IOPL and the exit-to-userspace code doesn't change IOPL. We need to context switch it manually. I'm doing this without going through paravirt because this is specific to Xen PV. After the dust settles, we can merge this with the 32-bit code, tidy up the iopl syscall implementation, and remove the set_iopl pvop entirely. Fixes XSA-171. Reviewewd-by:
-
Dave Jones authored
commit 7834c103 upstream. Since 4.4, I've been able to trigger this occasionally: =============================== [ INFO: suspicious RCU usage. ] 4.5.0-rc7-think+ #3 Not tainted Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20160315012054.GA17765@codemonkey.org.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Fixes: 4787c368 "x86/tracing: Add irq_enter/exit() in smp_trace_reschedule_interrupt()" Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Thomas Gleixner authored
commit 551adc60 upstream. Harry reported, that he's able to trigger a system freeze with cpu hot unplug. The freeze turned out to be a live lock caused by recent changes in irq_force_complete_move(). When fixup_irqs() and from there irq_force_complete_move() is called on the dying cpu, then all other cpus are in stop machine an wait for the dying cpu to complete the teardown. If there is a move of an interrupt pending then irq_force_complete_move() sends the cleanup IPI to the cpus in the old_domain mask and waits for them to clear the mask. That's obviously impossible as those cpus are firmly stuck in stop machine with interrupts disabled. I should have known that, but I completely overlooked it being concentrated on the locking issues around the vectors. And the existance of the call to __irq_complete_move() in the code, which actually sends the cleanup IPI made it reasonable to wait for that cleanup to complete. That call was bogus even before the recent changes as it was just a pointless distraction. We have to look at two cases: 1) The move_in_progress flag of the interrupt is set This means the ioapic has been updated with the new vector, but it has not fired yet. In theory there is a race: set_ioapic(new_vector) <-- Interrupt is raised before update is effective, i.e. it's raised on the old vector. So if the target cpu cannot handle that interrupt before the old vector is cleaned up, we get a spurious interrupt and in the worst case the ioapic irq line becomes stale, but my experiments so far have only resulted in spurious interrupts. But in case of cpu hotplug this should be a non issue because if the affinity update happens right before all cpus rendevouz in stop machine, there is no way that the interrupt can be blocked on the target cpu because all cpus loops first with interrupts enabled in stop machine, so the old vector is not yet cleaned up when the interrupt fires. So the only way to run into this issue is if the delivery of the interrupt on the apic/system bus would be delayed beyond the point where the target cpu disables interrupts in stop machine. I doubt that it can happen, but at least there is a theroretical chance. Virtualization might be able to expose this, but AFAICT the IOAPIC emulation is not as stupid as the real hardware. I've spent quite some time over the weekend to enforce that situation, though I was not able to trigger the delayed case. 2) The move_in_progress flag is not set and the old_domain cpu mask is not empty. That means, that an interrupt was delivered after the change and the cleanup IPI has been sent to the cpus in old_domain, but not all CPUs have responded to it yet. In both cases we can assume that the next interrupt will arrive on the new vector, so we can cleanup the old vectors on the cpus in the old_domain cpu mask. Fixes: 98229aa3 "x86/irq: Plug vector cleanup race" Reported-by:
Harry Junior <harryjr@outlook.fr> Tested-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Lorenzo Pieralisi authored
commit 4a2e7aab upstream. The [0 - 64k] ACPI PCI IO port resource boundary check in: acpi_dev_ioresource_flags() is currently applied blindly in the ACPI resource parsing to all architectures, but only x86 suffers from that IO space limitation. On arches (ie IA64 and ARM64) where IO space is memory mapped, the PCI root bridges IO resource windows are firstly initialized from the _CRS (in acpi_decode_space()) and contain the CPU physical address at which a root bridge decodes IO space in the CPU physical address space with the offset value representing the offset required to translate the PCI bus address into the CPU physical address. The IO resource windows are then parsed and updated in arch code before creating and enumerating PCI buses (eg IA64 add_io_space()) to map in an arch specific way the obtained CPU physical address range to a slice of virtual address space reserved to map PCI IO space, ending up with PCI bridges resource windows containing IO resources like the following on a working IA64 configuration: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x1000000-0x100ffff window] (bus address [0x0000-0xffff]) pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window] pci_bus 0000:00: root bus resource [bus 00] This implies that the [0 - 64K] check in acpi_dev_ioresource_flags() leaves platforms with memory mapped IO space (ie IA64) broken (ie kernel can't claim IO resources since the host bridge IO resource is disabled and discarded by ACPI core code, see log on IA64 with missing root bridge IO resource, silently filtered by current [0 - 64k] check in acpi_dev_ioresource_flags()): PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window] pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window] pci_bus 0000:00: root bus resource [bus 00] [...] pci 0000:00:03.0: [1002:515e] type 00 class 0x030000 pci 0000:00:03.0: reg 0x10: [mem 0x80000000-0x87ffffff pref] pci 0000:00:03.0: reg 0x14: [io 0x1000-0x10ff] pci 0000:00:03.0: reg 0x18: [mem 0x88020000-0x8802ffff] pci 0000:00:03.0: reg 0x30: [mem 0x88000000-0x8801ffff pref] pci 0000:00:03.0: supports D1 D2 pci 0000:00:03.0: can't claim BAR 1 [io 0x1000-0x10ff]: no compatible bridge window For this reason, the IO port resources boundaries check in generic ACPI parsing code should be guarded with a CONFIG_X86 guard so that more arches (ie ARM64) can benefit from the generic ACPI resources parsing interface without incurring in unexpected resource filtering, fixing at the same time current breakage on IA64. This patch factors out IO ports boundary [0 - 64k] check in generic ACPI code and makes the IO space check X86 specific to make sure that IO space resources are usable on other arches too. Fixes: 3772aea7 (ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge) Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Bjorn Helgaas authored
commit b84106b4 upstream. The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by:
-
Phil Elwell authored
commit 2c7e3306 upstream. The DT bindings for pinctrl-bcm2835 allow both the function and pull to contain either one entry or one per pin. However, an error in the DT parsing can cause failures if the number of pulls differs from the number of functions. Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Reviewed-by:
Stephen Warren <swarren@wwwdotorg.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sebastian Ott authored
commit 80c544de upstream. The function measurement block must not cross a page boundary. Ensure that by raising the alignment requirement to the smallest power of 2 larger than the size of the fmb. Fixes: d0b08853 ("s390/pci: performance statistics and debug infrastructure") Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 8f100bb1 upstream. Add the missing lpp magic initialization for cpu 0. Without this all samples on cpu 0 do not have the most significant bit set in the program parameter field, which we use to distinguish between guest and host samples if the pid is also 0. We did initialize the lpp magic in the absolute zero lowcore but forgot that when switching to the allocated lowcore on cpu 0 only. Reported-by:
Shu Juan Zhang <zhshuj@cn.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Fixes: e22cf8ca ("s390/cpumf: rework program parameter setting to detect guest samples") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
commit e370e476 upstream. There is a tricky interaction between the machine check handler and the critical sections of load_fpu_regs and save_fpu_regs functions. If the machine check interrupts one of the two functions the critical section cleanup will complete the function before the machine check handler s390_do_machine_check is called. Trouble is that the machine check handler needs to validate the floating point registers *before* and not *after* the completion of load_fpu_regs/save_fpu_regs. The simplest solution is to rewind the PSW to the start of the load_fpu_regs/save_fpu_regs and retry the function after the return from the machine check handler. Tested-by:
-
Dan Carpenter authored
commit 6f3508f6 upstream. dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5 ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwandaSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
