- 15 Mar, 2014 21 commits
-
-
Saurav Kashyap authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Armen Baloyan authored
[SCSI] qla2xxx: Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Atul Deshmukh authored
[SCSI] qla2xxx: Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for ISP8044. Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Armen Baloyan authored
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
Tell the mid-layer that number of commands we can queue is the available resources we have minus a small amount for internal commands. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Joe Carnuccio authored
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Atul Deshmukh authored
Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Armen Baloyan authored
[SCSI] qla2xxx: Replace constant value for IOCTL IOCB abort execution status with a macro for ISPFX00. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Armen Baloyan authored
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Eddie Wai authored
Old version: 2.4.1 New version: 2.4.2 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Eddie Wai authored
SCSI retry delay upon SAM_STAT_BUSY/_SET_FULL was not being handled in bnx2fc. This patch adds such handling by returning TARGET_BUSY to the SCSI ML for the corresponding LUN until the retry timer expires. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Eddie Wai authored
The problem has been identified to be a change in the scsi_remove_device path where a call to the pm_runtime_set_memalloc_noio was added when del_gendisk is called in this path. Note that the new pm routine attempts to cycle through all parent devices from the FC target device to set the memalloc_noio flag. Because of this new change, a dependency was created between the FC target device and the parent netdev device in the destroy path. In order to synchronized the destroy paths, bnx2fc has been modified to flush all destroy workqueues in the NETDEV_UNREGISTER return path. [ 4.123584] BUG: soft lockup - CPU#8 stuck for 22s! [kworker/8:3:8082] [ 4.123713] Call Trace: [ 4.123719] [<ffffffff815dfbe0>] klist_next+0x20/0xf0 [ 4.123725] [<ffffffff813e9220>] ? pm_save_wakeup_count+0x70/0x70 [ 4.123731] [<ffffffff813d9e4e>] device_for_each_child+0x4e/0x70 [ 4.123735] [<ffffffff813e9554>] pm_runtime_set_memalloc_noio+0x94/0xf0 [ 4.123740] [<ffffffff812d4d74>] del_gendisk+0x264/0x2a0 [ 4.123747] [<ffffffffa00c6dc9>] sd_remove+0x69/0xb0 [sd_mod] [ 4.123751] [<ffffffff813de24f>] __device_release_driver+0x7f/0xf0 [ 4.123754] [<ffffffff813de2e3>] device_release_driver+0x23/0x30 [ 4.123757] [<ffffffff813ddab4>] bus_remove_device+0xf4/0x170 [ 4.123760] [<ffffffff813da475>] device_del+0x135/0x1d0 [ 4.123765] [<ffffffff81411b75>] __scsi_remove_device+0xc5/0xd0 [ 4.123768] [<ffffffff81411ba6>] scsi_remove_device+0x26/0x40 [ 4.123770] [<ffffffff81411d40>] scsi_remove_target+0x160/0x210 [ 4.123775] [<ffffffffa0420e4c>] fc_rport_final_delete+0xac/0x1f0 [scsi_transport_fc] [ 4.123780] [<ffffffff810774ab>] process_one_work+0x17b/0x460 [ 4.123783] [<ffffffff8107825b>] worker_thread+0x11b/0x400 [ 4.123786] [<ffffffff81078140>] ? rescuer_thread+0x3e0/0x3e0 [ 4.123791] [<ffffffff8107e9c0>] kthread+0xc0/0xd0 [ 4.123794] [<ffffffff8107e900>] ? kthread_create_on_node+0x110/0x110 [ 4.123798] [<ffffffff8160ceec>] ret_from_fork+0x7c/0xb0 [ 4.123801] [<ffffffff8107e900>] ? kthread_create_on_node+0x110/0x110 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Viswas G authored
pm80xx_get_gsm_dump() was returning "1" in error case instead of negative error value. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Viswas G authored
Removed redundant code snippets in pm8001_hwi.c and pm8001_ctl.c Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 12 Mar, 2014 1 commit
-
-
Ales Novak authored
If the initialization of storvsc fails, the storvsc_device_destroy() causes NULL pointer dereference. storvsc_bus_scan() scsi_scan_target() __scsi_scan_target() scsi_probe_and_add_lun(hostdata=NULL) scsi_alloc_sdev(hostdata=NULL) sdev->hostdata = hostdata now the host allocation fails __scsi_remove_device(sdev) calls sdev->host->hostt->slave_destroy() == storvsc_device_destroy(sdev) access of sdev->hostdata->request_mempool Signed-off-by: Ales Novak <alnovak@suse.cz> Signed-off-by: Thomas Abraham <tabraham@suse.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 10 Mar, 2014 5 commits
-
-
Giridhar Malavali authored
Cc: stable@vger.kernel.org Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Lukasz Dorau authored
In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8131360b>] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[<ffffffff8131360b>] [<ffffffff8131360b>] __list_add+0x1b/0xc0 Call Trace: [<ffffffff81661b84>] __mutex_lock_slowpath+0x114/0x1b0 [<ffffffff81661c3f>] mutex_lock+0x1f/0x30 [<ffffffffa03e97cb>] sas_disable_events+0x1b/0x50 [libsas] [<ffffffffa03e9818>] sas_unregister_ha+0x18/0x60 [libsas] [<ffffffffa040316e>] isci_unregister+0x1e/0x40 [isci] [<ffffffffa0403efd>] isci_pci_remove+0x5d/0x100 [isci] [<ffffffff813391cb>] pci_device_remove+0x3b/0xb0 [<ffffffff813fbf7f>] __device_release_driver+0x7f/0xf0 [<ffffffff813fc8f8>] driver_detach+0xa8/0xb0 [<ffffffff813fbb8b>] bus_remove_driver+0x9b/0x120 [<ffffffff813fcf2c>] driver_unregister+0x2c/0x50 [<ffffffff813381f3>] pci_unregister_driver+0x23/0x80 [<ffffffffa04152f8>] isci_exit+0x10/0x1e [isci] [<ffffffff810d199b>] SyS_delete_module+0x16b/0x2d0 [<ffffffff81012a21>] ? do_notify_resume+0x61/0xa0 [<ffffffff8166ce29>] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com> Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Tested-by: Lukasz Dorau <lukasz.dorau@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Cc: <stable@vger.kernel.org> Acked-by: Lukasz Dorau <lukasz.dorau@intel.com> Reported-by: David Milburn <dmilburn@redhat.com> Reported-by: Xun Ni <xun.ni@intel.com> Tested-by: Xun Ni <xun.ni@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
https://bugzilla.kernel.org/show_bug.cgi?id=67091 Cc: Jayamohan Kallickal <Jayamohan.Kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
This fixes requesting of the MSI-X vectors for the base response queue. The iteration in the for loop in qla24xx_enable_msix() was incorrect. We should only iterate of the first two MSI-X vectors and not the total number of MSI-X vectors that have given to the driver for this device from pci_enable_msix() in this function. Cc: <stable@vger.kernel.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 19 Feb, 2014 2 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Lots of little small things, nothing too major: nouveau regression fixes, vmware fixes for the new hw support, memory leaks in error path fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) drm/radeon/ni: fix typo in dpm sq ramping setup drm/radeon/si: fix typo in dpm sq ramping setup drm/radeon: fix CP semaphores on CIK drm/radeon: delete a stray tab drm/radeon: fix display tiling setup on SI drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200 drm/radeon: fill in DRM_CAPs for cursor size drm: add DRM_CAPs for cursor size drm/radeon: unify bpc handling drm/ttm: Fix memory leak in ttm_agp_backend.c drm/ttm: declare 'struct device' in ttm_page_alloc.h drm/nouveau: fix TTM_PL_TT memtype on pre-nv50 drm/nv50/disp: use correct register to determine DP display bpp drm/nouveau/fb: use correct ram oclass for nv1a hardware drm/nv50/gr: add missing nv_error parameter priv drm/nouveau: fix ENG_RUNLIST register address drm/nv4c/bios: disallow retrieving from prom on nv4x igp's drm/nv4c/vga: decode register is in a different place on nv4x igp's drm/nv4c/mc: nv4x igp's have a different msi rearm register drm/nouveau: set irq_enabled manually ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID update from Jiri Kosina: - fixes for several bugs in incorrect allocations of buffers by David Herrmann and Benjamin Tissoires. - support for a few new device IDs by Archana Patni, Benjamin Tissoires, Huei-Horng Yo, Reyad Attiyat and Yufeng Shen * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hyperv: make sure input buffer is big enough HID: Bluetooth: hidp: make sure input buffers are big enough HID: hid-sensor-hub: quirk for STM Sensor hub HID: apple: add Apple wireless keyboard 2011 JIS model support HID: fix buffer allocations HID: multitouch: add FocalTech FTxxxx support HID: microsoft: Add ID's for Surface Type/Touch Cover 2 HID: usbhid: quirk for CY-TM75 75 inch Touch Overlay
-
- 18 Feb, 2014 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) kvaser CAN driver has fixed limits of some of it's table, validate that we won't exceed those limits at probe time. Fix from Olivier Sobrie. 2) Fix rtl8192ce disabling interrupts for too long, from Olivier Langlois. 3) Fix botched shift in ath5k driver, from Dan Carpenter. 4) Fix corruption of deferred packets in TIPC, from Erik Hugne. 5) Fix newlink error path in macvlan driver, from Cong Wang. 6) Fix netpoll deadlock in bonding, from Ding Tianhong. 7) Handle GSO packets properly in forwarding path when fragmentation is necessary on egress, from Florian Westphal. 8) Fix axienet build errors, from Michal Simek. 9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S Tsirkin. 10) Carrier status isn't set properly in hyperv driver, from Haiyang Zhang. 11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar. 12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX queue selection method. Add a fallback method mechanism to fix this bug, from Daniel Borkmann. 13) Fix regression in link local route handling on GRE tunnels, from Nicolas Dichtel. 14) Bonding can assign dup aggregator IDs in some sequences of configuration, fix by making the allocation counter per-bond instead of global. From Jiri Bohac. 15) sctp_connectx() needs compat translations, from Daniel Borkmann. 16) Fix of_mdio PHY interrupt parsing, from Ben Dooks * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) MAINTAINERS: add entry for the PHY library of_mdio: fix phy interrupt passing net: ethernet: update dependency and help text of mvneta NET: fec: only enable napi if we are successful af_packet: remove a stray tab in packet_set_ring() net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode ipv4: fix counter in_slow_tot irtty-sir.c: Do not set_termios() on irtty_close() bonding: 802.3ad: make aggregator_identifier bond-private usbnet: remove generic hard_header_len check gre: add link local route when local addr is any batman-adv: fix potential kernel paging error for unicast transmissions batman-adv: avoid double free when orig_node initialization fails batman-adv: free skb on TVLV parsing success batman-adv: fix TT CRC computation by ensuring byte order batman-adv: fix potential orig_node reference leak batman-adv: avoid potential race condition when adding a new neighbour batman-adv: properly check pskb_may_pull return value batman-adv: release vlan object after checking the CRC batman-adv: fix TT-TVLV parsing on OGM reception ...
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A range of ARM fixes. Biggest change is the stage-2 attributes used for for hyp mode which were wrong. I've killed some bits in a couple of DT files which turned out not to be required, and a few other fixes. One fix touches code outside of arch/arm, which is related to sorting out the DMA masks correctly. There is a long standing issue with the conversion from PFNs to addresses where people assume that shifting an unsigned long left by PAGE_SHIFT results in a correct address. This is not the case with C: the integer promotion happens at assignment after evaluation. This fixes the recently introduced dma_max_pfn() function, but there's a number of other places where we try this directly on an unsigned long in the mm code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7957/1: add DSB after icache flush in __flush_icache_all() Fix uses of dma_max_pfn() when converting to a limiting address ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU ARM: 7952/1: mm: Fix the memblock allocation for LPAE machines ARM: 7950/1: mm: Fix stage-2 device memory attributes ARM: dts: fix spdif pinmux configuration
-
git://github.com/kleikamp/linux-shaggyLinus Torvalds authored
Pull jfs fix from David Kleikamp: "Another ACL regression. This one more subtle" * tag 'jfs-3.14-rc4' of git://github.com/kleikamp/linux-shaggy: jfs: set i_ctime when setting ACL
-
Florian Fainelli authored
The PHY library has been subject to some changes, new drivers and DT interactions over the past few months. Add myself as a maintainer for the core PHY library parts and drivers. Make sure the PHY library entry also covers the Device Tree files which have a close interaction with the MDIO bus, PHY connection and Ethernet PHY mode parsing. CC: Grant Likely <grant.likely@linaro.org> CC: Shaohui Xie <shaohui.xie@freescale.com> CC: Andy Fleming <afleming@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Dooks authored
The of_mdiobus_register_phy() is not setting phy->irq thus causing some drivers to incorrectly assume that the PHY does not have an IRQ associated with it. Not only do some drivers report no IRQ they do not install an interrupt handler for the PHY. Simplify the code setting irq and set the phy->irq at the same time so that we cover the following issues, which should cover all the cases the code will find: - Set phy->irq if node has irq property and mdio->irq is NULL - Set phy->irq if node has no irq and mdio->irq is not NULL - Leave phy->irq as PHY_POLL default if none of the above This fixes the issue: net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI to the correct: net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Petazzoni authored
With the introduction of the support for Armada 375 and Armada 38x, the hidden Kconfig option MACH_ARMADA_370_XP is being renamed to MACH_MVEBU_V7. Therefore, the dependency that was used for the mvneta driver can no longer work. This commit replaces this dependency by a dependency on PLAT_ORION, which is used similarly for the mv643xx_eth driver. In addition to this, it takes this opportunity to adjust the description and help text to indicate that the driver can is also used for Armada 38x. Note that Armada 375 cannot use this driver as it has a completely different networking unit, which will require a separate driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
If napi is left enabled after a failed attempt to bring the interface up, we BUG: fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch libphy: PHY fixed-0:00 not found fec 2188000.ethernet eth0: could not attach to PHY ------------[ cut here ]------------ kernel BUG at include/linux/netdevice.h:502! Internal error: Oops - BUG: 0 [#1] SMP ARM ... PC is at fec_enet_open+0x4d0/0x500 LR is at __dev_open+0xa4/0xfc Only enable napi after we are past all the failure paths. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
At first glance it looks like there is a missing curly brace but actually the code works the same either way. I have adjusted the indenting but left the code the same. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Pull request of 2014-02-18 One compile fix and one memory leak. * tag 'ttm-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux: drm/ttm: Fix memory leak in ttm_agp_backend.c drm/ttm: declare 'struct device' in ttm_page_alloc.h
-
Dave Airlie authored
Merge tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux into drm-fixes Pull request of 2014-02-18. Nothing special. The biggest change is adding a couple of command defines and packing the command data correctly. * tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix command defines and checks drm/vmwgfx: Fix possible integer overflow drm/vmwgfx: Remove stray const drm/vmwgfx: unlock on error path in vmw_execbuf_process() drm/vmwgfx: Get maximum mob size from register SVGA_REG_MOB_MAX_SIZE drm/vmwgfx: Fix a couple of sparse warnings and errors
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fix for 128x128 cursors, along with some misc fixes. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/ni: fix typo in dpm sq ramping setup drm/radeon/si: fix typo in dpm sq ramping setup drm/radeon: fix CP semaphores on CIK drm/radeon: delete a stray tab drm/radeon: fix display tiling setup on SI drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200 drm/radeon: fill in DRM_CAPs for cursor size drm: add DRM_CAPs for cursor size drm/radeon: unify bpc handling
-