In previous patch we add new argument vif which has hif_drv in it's member.
Therefore, no need to pass hif_drv in those functions. Remove argument
struct host_if_drv and use hif_drv of vif.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We will pass vif, which is currently being used as net_device, instead of
hif_dev. This is the first step to use index of vif to pass to the driver.
Add new argument vif to all the functions that send message to hostIFthread and
set vif to msg.vif. As a result, hostIfthread will get vif.
In later patch, we will remove drv of host_if_msg and use vif instead of it.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are two net_device pointer which is the same because two structures
are merged into wilc_vif in previous patch. Remove wilc_netdev and change
with ndev.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vif of struct has it's own memory which is not necessary because we have
allocated vif from netdev_priv.
Change vif to pointer type and assign vif which is netdev private data.
Change it's operator on related codes as well.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perInterface_wlan_t and wilc_vif are all about interface control informations.
We will combine those two structures and maintain as one network interface
control information.
Move all the members of perInterface_wlan_t to wilc_vif and remove the
structure. Rename perInterace_wlan_t to wilc_vif and rename variable name nic
to vif which is proper name for it.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes unnedded extern variable WILC_WFI_devs[] which is not used.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes linux_wlan_spi.[ch] which are not used anymore.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves all the codes in linux_wlan_spi.c to wilc_spi.c to make
one spi module. Make wilc_spi_tx, wilc_spi_rx and wilc_spi_tx_rx static
functions. Remove function declaration in linux_wlan_spi.h, which is unnedded
now. No modification has been made inside the codes.
linux_wlan_spi.[ch] will be remove in the next patch.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wilc_spi_init in linux_wlan_spi.c is unneeded. It just return true. Rename
_wilc_spi_init in wlan_spi.c to wilc_spi_init.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are several similar function names, such as wilc_spi_write and
_wilc_spi_write. It is likely to be confused after merging linux_wlan_spi.c and
wilc_spi.c, so rename following functions properly.
Rename wilc_spi_write to wilc_spi_tx, wilc_spi_read to wilc_spi_rx,
wilc_spi_write_read to wilc_spi_tx_rx, _wilc_spi_write to wilc_spi_write,
_wilc_spi_read to wilc_spi_read.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes linux_wlan_sdio.[ch] which is not used anymore.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To Combine linux_wlan_sdio.c and wilc_sdio.c as one file, move all the codes
in linux_wlan_sdio.c to wilc_sdio.c, and make functions static only.
No Modification has not been made except static, just moved them.
Function declaration in linux_wlan_sdio.h is needless, so just remove them.
linux_wlan_sdio.[ch] will be deleted in the next patch.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Return ret from wilc_netdev_init instead of -1 for proper error handling.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

return linux error value instead of 0 or 1 and use -EINVAL. Related codes
also changed together.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the warning reported by smatch.
 - wilc_deinit() warn: inconsistent returns 'sem:&hif_drv->sem_cfg_values'

This semaphore protect a cfg_values variable but cfg_values variables was not
used here. So, just remove this line.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the warning reported by smatch.
 - wilc_init() warn: inconsistent returns 'sem:&hif_drv->sem_cfg_values'

No need to up the sema here since down was not called before get here.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the error reported by smatch.
 - Handle_ListenStateExpired() error: potential null dereference 'wid.val'
If kmalloc failed, referenced to a NULL pointer.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replace explicit NULL comparison with ! operator to simplify code.
Reported by checkpatch.pl for Comparison to NULL could be written !XXX" or "XXX".
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch CHECK:comparison to NULL could be written "b".
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch warning: missing a blank like after declarations.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patches fixes checkpatch warning: braces {} are not necessary for single
statement blocks. Remove some comments also.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes return value with linux error value, not 1 or 0.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes return value with linux error value, not 1 or 0.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch warning braces{} are not necessary for single
statment blocks.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch warning line over 80 characters.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes unused function pointer hif_sync and hif_clear_int, and
removes it's related functions sdio_clear_int, sdio_sync, wilc_spi_clear_int
and wilc_spi_sync.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes wilc_debug_func of hif_init and remove it's related
functions as well because it is not used anymore.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch use device print api instead of driver defined print. Remove
varialbe dPrint as well. String "[wilc sdio]" and "[wilc spi]" are also removed
from all the print statment if exist because it shows which device the message
is related to.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

linux_wlan.c and wilc_wlan.c was separated into two part at the beginning
to support various platforms. They are in charge of send/receive control and
packet data, so they will be merged into one file wlan.c later.
First of all, wilc_wlan_dev_t which is used as global variable of wilc_wlan.c
will be moved into struct wilc.
This patch moves all members of wilc_wlan_dev_t to struct wilc and use wilc
instead of g_wlan. Finally remove wilc_wlan_dev_t and g_wlan.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes unused variable tx_buffer_offset of wilc_wlan_dev_t.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_type of wilc_wlan_dev_t is unneeded, we can use io_type of struct wilc.
Remove io_type of wilc_wlan_dev_t and use io_type of wilc.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hif_func of wilc_wlan_dev_t is duplicate because we have same struct
wilc_hif_func ops of struct wilc which is available in wilc_wlan.c.
Rename ops of struct wilc with hif_func and remove hif_func of wilc_wlan_dev_t,
and use wilc->hif_func instead of g_wlan.hif_func in all functions.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes define BIG_ENDIAN and use kernel define byte order macros
instead of swap itself. Remove unused BYTE_SWAP macro and __CHECK_ENDIAN__
in Makefile also.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames "index" of struct txq_entry_t to tcp_pending_ack_idx
since this name could be confused index of txq_entry_t. It is index of
tcp pending ack.

It fixes 8e55639d ("staging: wilc1000: rename tcp_PendingAck_index
of struct txq_entry_t")
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch remove memory allocation options in Kconfig. It was used a long time
ago to aquire memory, which we will not use this config anymore.
Remove it's config, related define and codes as well. We will take
PREALLOCATE_AT_LOADING_DRIVER as it is default.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes define COMPLEMENT_BOOT in Makefile. The feature was removed
by commit b46d6882 ('staging: wilc1000: remove COMPLEMENT_BOOT') but
the define was not removed. So remove completely.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename these functions so they have namespace associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename these functions so they have namespace associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An (*insn_read) can only happen if the subdevice is in a non-busy state,
i.e. an async command is not running. The board reset and subdevice
(*cancel) will ensure that the control bits (devpriv->ctrl) are already
cleared.

The (*insn_read) only needs to enable the software trigger before reading
samples. It should also disable the software trigger when done. Fix the
(*insn_read) to do this.

For aesthetics, rename the function so it has namespace associated with
the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a number of descrepencies in the various manuals for the boards
that this driver supports. Some show a 10 MHz clock for counters 1 and 2
others show a 1 MHz clock. Counter 0 can use either a div 10 of that clock
or an external clock (up to 10 MHz).

Currently this driver initializes counters 1 and 2 with a 10 MHz clock.
For consistency, return 1 MHz (10 MHz/10) for counter 0 when the user
queries the internal clock source with INSN_CONFIG_GET_CLOCK_SRC.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>