- 22 Jun, 2019 40 commits
-
-
Jia-Ju Bai authored
[ Upstream commit 5bce256f ] In xhci_debugfs_create_slot(), kzalloc() can fail and dev->debugfs_private will be NULL. In xhci_debugfs_create_endpoint(), dev->debugfs_private is used without any null-pointer check, and can cause a null pointer dereference. To fix this bug, a null-pointer check is added in xhci_debugfs_create_endpoint(). This bug is found by a runtime fuzzing tool named FIZZER written by us. [subjet line change change, add potential -Mathais] Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Anju T Sudhakar authored
[ Upstream commit b59bd352 ] Currently init_imc_pmu() can fail either because we try to register an IMC unit with an invalid domain (i.e an IMC node not supported by the kernel) or something went wrong while registering a valid IMC unit. In both the cases kernel provides a 'Register failed' error message. For example when trace-imc node is not supported by the kernel, but skiboot advertises a trace-imc node we print: IMC Unknown Device type IMC PMU (null) Register failed To avoid confusion just print the unknown device type message, before attempting PMU registration, so the second message isn't printed. Fixes: 8f95faaa ("powerpc/powernv: Detect and create IMC device") Reported-by:
Pavaman Subramaniyam <pavsubra@in.ibm.com> Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> [mpe: Reword change log a bit] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 1cc54078 ] We need to always call clkdm_clk_enable() and clkdm_clk_disable() even the clkctrl clock(s) enabled for the domain do not have any gate register bits. Otherwise clockdomains may never get enabled except when devices get probed with the legacy "ti,hwmods" devicetree property. Fixes: 88a17252 ("clk: ti: add support for clkctrl clocks") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Jeffrin Jose T authored
[ Upstream commit 82ce6eb1 ] A test for the basic NAT functionality uses ip command which needs veth device. There is a condition where the kernel support for veth is not compiled into the kernel and the test script breaks. This patch contains code for reasonable error display and correct code exit. Signed-off-by:
Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 719c7d56 ] BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs] Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603 CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ #30 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x270 kasan_report+0x179/0x2c0 ip_vs_in.part.29+0xe8/0xd20 [ip_vs] ip_vs_in+0xd8/0x170 [ip_vs] nf_hook_slow+0x5f/0xe0 __ip_local_out+0x1d5/0x250 ip_local_out+0x19/0x60 __tcp_transmit_skb+0xba1/0x14f0 tcp_write_xmit+0x41f/0x1ed0 ? _copy_from_iter_full+0xca/0x340 __tcp_push_pending_frames+0x52/0x140 tcp_sendmsg_locked+0x787/0x1600 ? tcp_sendpage+0x60/0x60 ? inet_sk_set_state+0xb0/0xb0 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x6d/0x80 sock_write_iter+0x121/0x1c0 ? sock_sendmsg+0x80/0x80 __vfs_write+0x23e/0x370 vfs_write+0xe7/0x230 ksys_write+0xa1/0x120 ? __ia32_sys_read+0x50/0x50 ? __audit_syscall_exit+0x3ce/0x450 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7ff6f6147c60 Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60 RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003 RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74 R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0 Allocated by task 6052: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x10a/0x220 ops_init+0x97/0x190 register_pernet_operations+0x1ac/0x360 register_pernet_subsys+0x24/0x40 0xffffffffc0ea016d do_one_initcall+0x8b/0x253 do_init_module+0xe3/0x335 load_module+0x2fc0/0x3890 __do_sys_finit_module+0x192/0x1c0 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6067: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1a0 ops_free_list.part.7+0xa6/0xc0 unregister_pernet_operations+0x18b/0x1f0 unregister_pernet_subsys+0x1d/0x30 ip_vs_cleanup+0x1d/0xd2f [ip_vs] __x64_sys_delete_module+0x20c/0x300 do_syscall_64+0x73/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096 The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600) The buggy address belongs to the page: page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0 flags: 0x17ffffc0008100(slab|head) raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600 raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected while unregistering ipvs module, ops_free_list calls __ip_vs_cleanup, then nf_unregister_net_hooks be called to do remove nf hook entries. It need a RCU period to finish, however net->ipvs is set to NULL immediately, which will trigger NULL pointer dereference when a packet is hooked and handled by ip_vs_in where net->ipvs is dereferenced. Another scene is ops_free_list call ops_free to free the net_generic directly while __ip_vs_cleanup finished, then calling ip_vs_in will triggers use-after-free. This patch moves nf_unregister_net_hooks from __ip_vs_cleanup() to __ip_vs_dev_cleanup(), where rcu_barrier() is called by unregister_pernet_device -> unregister_pernet_operations, that will do the needed grace period. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: efe41606 ("ipvs: convert to use pernet nf_hook api") Suggested-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Phil Sutter authored
[ Upstream commit e633508a ] NFTA_FIB_F_PRESENT flag was not always honored since eval functions did not call nft_fib_store_result in all cases. Given that in all callsites there is a struct net_device pointer available which holds the interface data to be stored in destination register, simplify nft_fib_store_result() to just accept that pointer instead of the nft_pktinfo pointer and interface index. This also allows to drop the index to interface lookup previously needed to get the name associated with given index. Fixes: 055c4b34 ("netfilter: nft_fib: Support existence check") Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Jagdish Motwani authored
[ Upstream commit 946c0d8e ] This patch fixes netfilter hook traversal when there are more than 1 hooks returning NF_QUEUE verdict. When the first queue reinjects the packet, 'nf_reinject' starts traversing hooks with a proper hook_index. However, if it again receives a NF_QUEUE verdict (by some other netfilter hook), it queues the packet with a wrong hook_index. So, when the second queue reinjects the packet, it re-executes hooks in between. Fixes: 960632ec ("netfilter: convert hook list to an array") Signed-off-by:
Jagdish Motwani <jagdish.motwani@sophos.com> Signed-off-by:
-
Stephane Eranian authored
[ Upstream commit 23e3983a ] This patch fixes an bug revealed by the following commit: 6b89d4c1 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking") That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code when matching a constraint. If code+umask were needed, then the INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead. This broke with some of the constraints for PEBS events. Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp fell in that category and caused the event to be rejected in PEBS mode. In other words, on some platforms a cmdline such as: $ perf top -e cycles:pp would fail with -EINVAL. This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT() when needed in the PEBS constraint tables. Reported-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.comSigned-off-by:
-
Florian Westphal authored
[ Upstream commit 2c82c7e7 ] We can oops in nf_tables_fill_rule_info(). Its not possible to fetch previous element in rcu-protected lists when deletions are not prevented somehow: list_del_rcu poisons the ->prev pointer value. Before rcu-conversion this was safe as dump operations did hold nfnetlink mutex. Pass previous rule as argument, obtained by keeping a pointer to the previous rule during traversal. Fixes: d9adf22a ("netfilter: nf_tables: use call_rcu in netlink dumps") Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 670784fb ] Commit a939bb57 ("pinctrl: intel: implement gpio_irq_enable") was added because clearing interrupt status bit is required to avoid unexpected behavior. Turns out the unmask callback also needs the fix, which can solve weird IRQ triggering issues on I2C touchpad ELAN1200. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit fea69916 ] If ->hif_read_reg() or ->hif_write_reg() fail then the code unlocks and keeps executing. It should just return. Fixes: c5c77ba1 ("staging: wilc1000: Add SDIO/SPI 802.11 driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ca4e4efb ] These are accidentally returning positive EINVAL instead of negative -EINVAL. Some of the callers treat positive values as success. Fixes: 7b3ad5ab ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Chengguang Xu authored
[ Upstream commit f2dcb884 ] Set sb->s_root to NULL when failing from __getname(), so that we can avoid double dput and unnecessary operations in generic_shutdown_super(). Signed-off-by:
Chengguang Xu <cgxu519@gmail.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Reviewed-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Steve Moskovchenko authored
[ Upstream commit 1615fe41 ] The MPU6050 driver has recently gained support for the ICM20602 IMU, which is very similar to MPU6xxx. However, the ICM20602's FIFO data specifically includes temperature readings, which were not present on MPU6xxx parts. As a result, the driver will under-read the ICM20602's FIFO register, causing the same (partial) sample to be returned for all reads, until the FIFO overflows. Fix this by adding a table of scan elements specifically for the ICM20602, which takes the extra temperature data into consideration. While we're at it, fix the temperature offset and scaling on ICM20602, since it uses different scale/offset constants than the rest of the MPU6xxx devices. Signed-off-by:
Steve Moskovchenko <stevemo@skydio.com> Fixes: 22904bdf ("iio: imu: mpu6050: Add support for the ICM 20602 IMU") Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Alaa Hleihel authored
After introducing dedicated uplink representor, the netdev instance set over the esw manager vport (PF) became no longer in use, so it was removed in the cited commit once we're on switchdev mode. However, the mlx5e_detach function was not updated accordingly, and it still tries to detach a non-existing netdev, causing a kernel crash. This patch fixes this issue. Fixes: aec002f6 ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode") Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 522924b5 ] The below patch fixes an incorrect zerocopy refcnt increment when appending with MSG_MORE to an existing zerocopy udp skb. send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt 1 send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt still 1 (bar frags) But it missed that zerocopy need not be passed at the first send. The right test whether the uarg is newly allocated and thus has extra refcnt 1 is not !skb, but !skb_zcopy. send(.., MSG_MORE); // <no uarg> send(.., MSG_ZEROCOPY); // refcnt 1 Fixes: 100f6d8e ("net: correct zerocopy refcnt with udp MSG_MORE") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eli Britstein authored
Stacked devices like bond interface may have a VLAN device on top of them. Detect lag state correctly under this condition, and return the correct routed net device, according to it the encap header is built. Fixes: e32ee6c7 ("net/mlx5e: Support tunnel encap over tagged Ethernet") Signed-off-by:
Eli Britstein <elibr@mellanox.com> Reviewed-by:
-
Petr Machata authored
Due to an issue on Spectrum-2, in front-panel ports split four ways, 2 out of 32 port buffers cannot be used. To work around this, the next FW release will mark them as unused, and will report correspondingly lower total shared buffer size. mlxsw will pick up the new value through a query to cap_total_buffer_size resource. However the initial size for shared buffer pool 0 is hard-coded and therefore needs to be updated. Thus reduce the pool size by 2.7 MiB (which corresponds to 2/32 of the total size of 42 MiB), and round down to the whole number of cells. Fixes: fe099bf6 ("mlxsw: spectrum_buffers: Add Spectrum-2 shared buffer configuration") Signed-off-by:
Petr Machata <petrm@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Raed Salem authored
The cited commit changed the initialization placement of the eswitch attributes so it is done prior to parse tc actions function call, including among others the in_rep and in_mdev fields which are mistakenly reassigned inside the parse actions function. This breaks the source port matching criteria of the peer redirect rule. Fix by removing the now redundant reassignment of the already initialized fields. Fixes: 988ab9c7 ("net/mlx5e: Introduce mlx5e_flow_esw_attr_init() helper") Signed-off-by:
Raed Salem <raeds@mellanox.com> Reviewed-by:
-
Jiri Pirko authored
The TOS value was not extracted correctly. Fix it. Fixes: 87996f91 ("mlxsw: spectrum_flower: Add support for ip tos") Reported-by:
Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by:
-
Chris Mi authored
After we have a dedicated uplink representor, the new netdev ops doesn't support ndo_set_feature. Because of that, we can't change some features, eg. rxvlan. Now add it back. In this patch, I also do a cleanup for the features flag handling, eg. remove duplicate NETIF_F_HW_TC flag setting. Fixes: aec002f6 ("net/mlx5e: Uninstantiate esw manager vport netdev on switchdev mode") Signed-off-by:
Chris Mi <chrism@mellanox.com> Reviewed-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
The driver tries to periodically refresh neighbours that are used to reach nexthops. This is done by periodically calling neigh_event_send(). However, if the neighbour becomes dead, there is nothing we can do to return it to a connected state and the above function call is basically a NOP. This results in the nexthop never being written to the device's adjacency table and therefore never used to forward packets. Fix this by dropping our reference from the dead neighbour and associating the nexthop with a new neigbhour which we will try to refresh. Fixes: a7ff87ac ("mlxsw: spectrum_router: Implement next-hop routing") Signed-off-by:
Alex Veber <alexve@mellanox.com> Tested-by:
-
Edward Srouji authored
Add missing entries for create/destroy UCTX and UMEM commands. This could get us wrong "unknown FW command" error in flows where we unbind the device or reset the driver. Also the translation of these commands from opcodes to string was missing. Fixes: 6e3722ba ("IB/mlx5: Use the correct commands for UMEM and UCTX allocation") Signed-off-by:
Edward Srouji <edwards@mellanox.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit f0d2ca15 ] Using ethtool, users can specify a classification action matching on the full vlan tag, which includes the DEI bit (also previously called CFI). However, when converting the ethool_flow_spec to a flow_rule, we use dissector keys to represent the matching patterns. Since the vlan dissector key doesn't include the DEI bit, this information was silently discarded when translating the ethtool flow spec in to a flow_rule. This commit adds the DEI bit into the vlan dissector key, and allows propagating the information to the driver when parsing the ethtool flow spec. Fixes: eca4205f ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Reported-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Robert Hancock authored
[ Upstream commit 6bb9e376 ] If some of the switch ports were not listed in the device tree, due to being unused, the ksz_mib_read_work function ended up accessing a NULL dp->slave pointer and causing an oops. Skip checking statistics for any unused ports. Fixes: 7c6ff470 ("net: dsa: microchip: add MIB counter reading support") Signed-off-by:
Robert Hancock <hancock@sedsystems.ca> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit 6b7a3430 ] When removing all VID filters, the mvpp2_prs_vid_entry_remove would be called with the TCAM id incorrectly used as a VID, causing the wrong TCAM entries to be invalidated. Fix this by directly invalidating entries in the VID range. Fixes: 56beda3d ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by:
Yuri Chipchev <yuric@marvell.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit 46b0090a ] VID filtering is implemented in the Header Parser, with one range of 11 vids being assigned for each no-loopback port. Make sure we use the per-port range when looking for existing entries in the Parser. Since we used a global range instead of a per-port one, this causes VIDs to be removed from the whitelist from all ports of the same PPv2 instance. Fixes: 56beda3d ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by:
-
Stefano Brivio authored
[ Upstream commit eccc73a6 ] In commit a0796644 ("geneve: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e ("fou, fou6: do not assume linear skbs") and 5355ed63 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the GENEVE header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by:
Guillaume Nault <gnault@redhat.com> Fixes: a0796644 ("geneve: ICMP error lookup handler") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 8399a693 ] In commit c3a43b9f ("vxlan: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e ("fou, fou6: do not assume linear skbs") and 5355ed63 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the VXLAN header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by:
-
Alaa Hleihel authored
Prior to reloading a device we must first verify that it was not already removed. Otherwise, the attempt to remove the device will do nothing, and in that case we will end up proceeding with adding an new device that no one was expecting to remove, leaving behind used resources such as EQs that causes a failure to destroy comp EQs and syndrome (0x30f433). Fix that by making sure that we try to remove and add a device (based on a protocol) only if the device is already added. Fixes: c5447c70 ("net/mlx5: E-Switch, Reload IB interface when switching devlink modes") Signed-off-by:
-
Stephen Barber authored
[ Upstream commit 42f5cda5 ] Set the SOCK_DONE flag to match the TCP_CLOSING state when a peer has shut down and there is nothing left to read. This fixes the following bug: 1) Peer sends SHUTDOWN(RDWR). 2) Socket enters TCP_CLOSING but SOCK_DONE is not set. 3) read() returns -ENOTCONN until close() is called, then returns 0. Signed-off-by:
Stephen Barber <smbarber@chromium.org> Signed-off-by:
-
Xin Long authored
[ Upstream commit 5cf02612 ] Syzbot reported a memleak caused by grp members' deferredq list not purged when the grp is be deleted. The issue occurs when more(msg_grp_bc_seqno(hdr), m->bc_rcv_nxt) in tipc_group_filter_msg() and the skb will stay in deferredq. So fix it by calling __skb_queue_purge for each member's deferredq in tipc_group_delete() when a tipc sk leaves the grp. Fixes: b87a5ea3 ("tipc: guarantee group unicast doesn't bypass group broadcast") Reported-by: syzbot+78fbe679c8ca8d264a8d@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
John Paul Adrian Glaubitz authored
[ Upstream commit 07a6d63e ] In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS" to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged. This results in the hypervisor console device to be listed as "ttyHV0" under /proc/consoles while the device node is still named "ttyS0": root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyS0 root@osaka:~# This means that any userland code which tries to determine the name of the device file of the hypervisor console device can not rely on the information provided by /proc/consoles. In particular, booting current versions of debian- installer inside a SPARC LDOM will fail with the installer unable to determine the console device. After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well, the inconsistency is fixed and it is possible again to determine the name of the device file of the hypervisor console device by reading the contents of /proc/console: root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyHV0 root@osaka:~# With this change, debian-installer works correctly when installing inside a SPARC LDOM. Signed-off-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
-
Neil Horman authored
[ Upstream commit ce950f10 ] Based on comments from Xin, even after fixes for our recent syzbot report of cookie memory leaks, its possible to get a resend of an INIT chunk which would lead to us leaking cookie memory. To ensure that we don't leak cookie memory, free any previously allocated cookie first. Change notes v1->v2 update subsystem tag in subject (davem) repeat kfree check for peer_random and peer_hmacs (xin) v2->v3 net->sctp also free peer_chunks v3->v4 fix subject tags v4->v5 remove cut line Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: Xin Long <lucien.xin@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Young Xiao authored
[ Upstream commit 385097a3 ] Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to accessing them. This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Signed-off-by:
Young Xiao <92siuyang@gmail.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 648ee6ce ] tls_sw_do_sendpage needs to return the total number of bytes sent regardless of how many sk_msgs are allocated. Unfortunately, copied (the value we return up the stack) is zero'd before each new sk_msg is allocated so we only return the copied size of the last sk_msg used. The caller (splice, etc.) of sendpage will then believe only part of its data was sent and send the missing chunks again. However, because the data actually was sent the receiver will get multiple copies of the same data. To reproduce this do multiple sendfile calls with a length close to the max record size. This will in turn call splice/sendpage, sendpage may use multiple sk_msg in this case and then returns the incorrect number of bytes. This will cause splice to resend creating duplicate data on the receiver. Andre created a C program that can easily generate this case so we will push a similar selftest for this to bpf-next shortly. The fix is to _not_ zero the copied field so that the total sent bytes is returned. Reported-by:
Steinar H. Gunderson <steinar+kernel@gunderson.no> Reported-by:
Andre Tomt <andre@tomt.net> Tested-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 309b6697 ] In order to create an internal vport, internal_dev_create() is used and that calls register_netdevice() internally. If register_netdevice() fails, it calls dev->priv_destructor() to free private data of netdev. actually, a private data of this is a vport. Hence internal_dev_create() should not free and use a vport after failure of register_netdevice(). Test command ovs-dpctl add-dp bonding_masters Splat looks like: [ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G B 5.2.0-rc3+ #240 [ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch] [ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4 [ 1035.713720] RSP: 0018:ffff88810dcb7578 EFLAGS: 00010206 [ 1035.713720] RAX: dffffc0000000000 RBX: ffff88810d13fe08 RCX: ffffffff84297704 [ 1035.713720] RDX: 00000000000000ac RSI: 0000000000000000 RDI: 0000000000000560 [ 1035.713720] RBP: 00000000ffffffef R08: fffffbfff0d3b881 R09: fffffbfff0d3b881 [ 1035.713720] R10: 0000000000000001 R11: fffffbfff0d3b880 R12: 0000000000000000 [ 1035.768776] R13: 0000607ee460b900 R14: ffff88810dcb7690 R15: ffff88810dcb7698 [ 1035.777709] FS: 00007f02095fc980(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 [ 1035.777709] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.777709] CR2: 00007ffdf01d2f28 CR3: 0000000108258000 CR4: 00000000001006e0 [ 1035.777709] Call Trace: [ 1035.777709] ovs_vport_add+0x267/0x4f0 [openvswitch] [ 1035.777709] new_vport+0x15/0x1e0 [openvswitch] [ 1035.777709] ovs_vport_cmd_new+0x567/0xd10 [openvswitch] [ 1035.777709] ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch] [ 1035.777709] ? __kmalloc+0x131/0x2e0 [ 1035.777709] ? genl_family_rcv_msg+0xa54/0x1030 [ 1035.777709] genl_family_rcv_msg+0x63a/0x1030 [ 1035.777709] ? genl_unregister_family+0x630/0x630 [ 1035.841681] ? debug_show_all_locks+0x2d0/0x2d0 [ ... ] Fixes: cf124db5 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Greg Rose <gvrose8192@gmail.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 760c80b7 ] We get this regression when using RTL8366RB as part of a bridge with OpenWrt: WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291 switchdev_port_attr_set_now+0x80/0xa4 lan0: Commit of attribute (id=7) failed. (...) realtek-smi switch lan0: failed to initialize vlan filtering on this port This is because it is trying to disable VLAN filtering on VLAN0, as we have forgot to add 1 to the port number to get the right VLAN in rtl8366_vlan_filtering(): when we initialize the VLAN we associate VLAN1 with port 0, VLAN2 with port 1 etc, so we need to add 1 to the port offset. Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f3e92cb8 ] Nine years ago, I added RCU handling to neighbours, not pneighbours. (pneigh are not commonly used) Unfortunately I missed that /proc dump operations would use a common entry and exit point : neigh_seq_start() and neigh_seq_stop() We need to read_lock(tbl->lock) or risk use-after-free while iterating the pneigh structures. We might later convert pneigh to RCU and revert this patch. sysbot reported : BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158 Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825 CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240 seq_read+0x9cf/0x1110 fs/seq_file.c:258 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221 do_loop_readv_writev fs/read_write.c:714 [inline] do_loop_readv_writev fs/read_write.c:701 [inline] do_iter_read+0x4a4/0x660 fs/read_write.c:935 vfs_readv+0xf0/0x160 fs/read_write.c:997 kernel_readv fs/splice.c:359 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:414 do_splice_to+0x127/0x180 fs/splice.c:877 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4592c9 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4 R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff Allocated by task 9827: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503 __do_kmalloc mm/slab.c:3660 [inline] __kmalloc+0x15c/0x740 mm/slab.c:3669 kmalloc include/linux/slab.h:552 [inline] pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731 arp_req_set_public net/ipv4/arp.c:1010 [inline] arp_req_set+0x613/0x720 net/ipv4/arp.c:1026 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043 sock_ioctl+0x3ed/0x780 net/socket.c:1194 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9824: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kfree+0xcf/0x220 mm/slab.c:3755 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline] __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274 inetdev_destroy net/ipv4/devinet.c:319 [inline] inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95 __raw_notifier_call_chain kernel/notifier.c:396 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline] call_netdevice_notifiers net/core/dev.c:1775 [inline] rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178 rollback_registered+0x109/0x1d0 net/core/dev.c:8220 unregister_netdevice_queue net/core/dev.c:9267 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260 unregister_netdevice include/linux/netdevice.h:2631 [inline] __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724 tun_detach drivers/net/tun.c:741 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451 __fput+0x2ff/0x890 fs/file_table.c:280 ____fput+0x16/0x20 fs/file_table.c:313 task_work_run+0x145/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888097f2a700 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888097f2a700, ffff888097f2a740) The buggy address belongs to the page: page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340 raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
-
Jeremy Sowden authored
[ Upstream commit 6be8e297 ] lapb_register calls lapb_create_cb, which initializes the control- block's ref-count to one, and __lapb_insert_cb, which increments it when adding the new block to the list of blocks. lapb_unregister calls __lapb_remove_cb, which decrements the ref-count when removing control-block from the list of blocks, and calls lapb_put itself to decrement the ref-count before returning. However, lapb_unregister also calls __lapb_devtostruct to look up the right control-block for the given net_device, and __lapb_devtostruct also bumps the ref-count, which means that when lapb_unregister returns the ref-count is still 1 and the control-block is leaked. Call lapb_put after __lapb_devtostruct to fix leak. Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
