- 12 Apr, 2016 40 commits
-
-
Sebastian Frias authored
commit 0b41ce99 upstream. Some UART HW has a single register combining UART_DLL/UART_DLM (this was probably forgotten in the change that introduced the callbacks, commit b32b19b8) Fixes: b32b19b8 ("[SERIAL] 8250: set divisor register correctly ...") Signed-off-by:
Sebastian Frias <sf84@laposte.net> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Hurley authored
commit 401879c5 upstream. The N_IRDA line discipline may access the previous line discipline's closed and already-fre private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] ================================================================== BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068 Read of size 4 by task a.out/13960 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- ... Call Trace: [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279 [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436 [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447 [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607 [< inline >] SYSC_ioctl fs/ioctl.c:622 [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613 [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a Reported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Peter Hurley authored
commit f33798de upstream. commit 9ce119f3 ("tty: Fix GPF in flush_to_ldisc()") fixed a GPF caused by a line discipline which does not define a receive_buf() method. However, the vt driver (and speakup driver also) pushes selection data directly to the line discipline receive_buf() method via tty_ldisc_receive_buf(). Fix the same problem in tty_ldisc_receive_buf(). Signed-off-by:
-
H Hartley Sweeten authored
commit bd3a3cd6 upstream. Memory mapped io (dev->mmio) should not also be writing to the ioport (dev->iobase) registers. Add the missing 'else' to these functions. Fixes: 0953ee4a ("staging: comedi: ni_mio_common: checkpatch.pl cleanup (else not useful)") Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Vladimir Zapolskiy authored
commit ccbc2a9e upstream. On error platform_device_register_simple() returns ERR_PTR() value, check for NULL always fails. The change corrects the check itself and propagates the returned error upwards. Fixes: 81fb0b90 ("staging: android: ion_test: unregister the platform device") Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Spencer E. Olson authored
commit 1fd24a47 upstream. This fixes a bug in function ni_tio_input_inttrig(). The trigger number should be compared to cmd->start_arg, not cmd->start_src. Fixes: 6a760394 ("staging: comedi: ni_tiocmd: clarify the cmd->start_arg validation and use") Signed-off-by:
Spencer E. Olson <olsonse@umich.edu> Reviewed-by:
-
Benjamin Tissoires authored
commit 4392bf33 upstream. hid_ignore_special_drivers works fine until hid_scan_report autodetects and reassign devices (for hid-multitouch, hid-microsoft and hid-rmi). Simplify the handling of the parameter: if it is there, use hid-generic, no matter what, and if not, scan the device or rely on the hid_have_special_driver table. This was detected while trying to disable hid-multitouch on a Surface Pro cover which prevented to use the keyboard. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Benjamin Tissoires authored
commit 45c5c682 upstream. The Synaptics 0x11e5 over I2C found in the Asus T100-CHI requires to fetch the signature blob to actually start sending events. With this patch, we should be close enough to the Windows driver which checks the content of the blob at plugin to validate or not the touchscreen. Link: https://bugzilla.kernel.org/show_bug.cgi?id=113481 Fixes: 6d4f5440 ("HID: multitouch: Fetch feature reports on demand for Win8 devices") Signed-off-by:
-
Dmitry Torokhov authored
commit 3b654288 upstream. Even though hid_hw_* checks that passed in data_len is less than HID_MAX_BUFFER_SIZE it is not enough, as i2c-hid does not necessarily allocate buffers of HID_MAX_BUFFER_SIZE but rather checks all device reports and select largest size. In-kernel users normally just send as much data as report needs, so there is no problem, but hidraw users can do whatever they please: BUG: KASAN: slab-out-of-bounds in memcpy+0x34/0x54 at addr ffffffc07135ea80 Write of size 4101 by task syz-executor/8747 CPU: 2 PID: 8747 Comm: syz-executor Tainted: G BU 3.18.0 #37 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc00020ebcc>] dump_backtrace+0x0/0x258 arch/arm64/kernel/traps.c:83 [<ffffffc00020ee40>] show_stack+0x1c/0x2c arch/arm64/kernel/traps.c:172 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc001958114>] dump_stack+0x90/0x140 lib/dump_stack.c:50 [< inline >] print_error_description mm/kasan/report.c:97 [< inline >] kasan_report_error mm/kasan/report.c:278 [<ffffffc0004597dc>] kasan_report+0x268/0x530 mm/kasan/report.c:305 [<ffffffc0004592e8>] __asan_storeN+0x20/0x150 mm/kasan/kasan.c:718 [<ffffffc0004594e0>] memcpy+0x30/0x54 mm/kasan/kasan.c:299 [<ffffffc001306354>] __i2c_hid_command+0x2b0/0x7b4 drivers/hid/i2c-hid/i2c-hid.c:178 [< inline >] i2c_hid_set_or_send_report drivers/hid/i2c-hid/i2c-hid.c:321 [<ffffffc0013079a0>] i2c_hid_output_raw_report.isra.2+0x3d4/0x4b8 drivers/hid/i2c-hid/i2c-hid.c:589 [<ffffffc001307ad8>] i2c_hid_output_report+0x54/0x68 drivers/hid/i2c-hid/i2c-hid.c:602 [< inline >] hid_hw_output_report include/linux/hid.h:1039 [<ffffffc0012cc7a0>] hidraw_send_report+0x400/0x414 drivers/hid/hidraw.c:154 [<ffffffc0012cc7f4>] hidraw_write+0x40/0x64 drivers/hid/hidraw.c:177 [<ffffffc0004681dc>] vfs_write+0x1d4/0x3cc fs/read_write.c:534 [< inline >] SYSC_pwrite64 fs/read_write.c:627 [<ffffffc000468984>] SyS_pwrite64+0xec/0x144 fs/read_write.c:614 Object at ffffffc07135ea80, in cache kmalloc-512 Object allocated with size 268 bytes. Let's check data length against the buffer size before attempting to copy data over. Reported-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
Dmitry Torokhov <dtor@chromium.org> Reviewed-by:
-
Grazvydas Ignotas authored
commit 5d74325a upstream. The patch that added Logitech Dual Action gamepad support forgot to update the special driver list for the device. This caused the logitech driver not to probe unless kernel module load order was favorable. Update the special driver list to fix it. Thanks to Simon Wood for the idea. Cc: Vitaly Katraew <zawullon@gmail.com> Fixes: 56d0c8b7 ("HID: add support for Logitech Dual Action gamepads") Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Jarkko Sakkinen authored
commit 8e0ee3c9 upstream. If the initialization fails before tpm_chip_register(), put_device() will be not called, which causes release callback not to be called. This patch fixes the issue by adding put_device() to devres list of the parent device. Fixes: 313d21ee ("tpm: device class for tpm") Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Harald Hoyer authored
commit 186d124f upstream. The commit 0cc698af ("vTPM: support little endian guests") copied the event, but without the event data, did an endian conversion on the size and tried to output the event data from the copied version, which has only have one byte of the data, resulting in garbage event data. [jarkko.sakkinen@linux.intel.com: fixed minor coding style issues and renamed the local variable tempPtr as temp_ptr now that there is an excuse to do this.] Signed-off-by:
Harald Hoyer <harald@redhat.com> Fixes: 0cc698af ("vTPM: support little endian guests") Reviewed-by:
-
Jarkko Sakkinen authored
commit 99cda8cb upstream. Wrong call order. Reported-by:
-
Jarkko Sakkinen authored
commit 72c91ce8 upstream. Fixed the rollback and gave more self-documenting names for the functions. Fixes: d972b052 ("tpm: fix call order in tpm-chip.c") Signed-off-by:
-
Alexander Usyskin authored
commit 15c13dfc upstream. The bus data transfer interface was missing the check if the device is in enabled state, this may lead to stack corruption during link reset. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
David Howells authored
commit ac4cbedf upstream. There are still a couple of minor issues in the X.509 leap year handling: (1) To avoid doing a modulus-by-400 in addition to a modulus-by-100 when determining whether the year is a leap year or not, I divided the year by 100 after doing the modulus-by-100, thereby letting the compiler do one instruction for both, and then did a modulus-by-4. Unfortunately, I then passed the now-modified year value to mktime64() to construct a time value. Since this isn't a fast path and since mktime64() does a bunch of divisions, just condense down to "% 400". It's also easier to read. (2) The default month length for any February where the year doesn't divide by four exactly is obtained from the month_length[] array where the value is 29, not 28. This is fixed by altering the table. Reported-by:
Rudolf Polzer <rpolzer@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
David Woodhouse <David.Woodhouse@intel.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Boris BREZILLON authored
commit dfe97ad3 upstream. Forward devm_ioremap_resource() error code instead of returning -ENOMEM. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by:
Russell King - ARM Linux <linux@arm.linux.org.uk> Fixes: f63601fd ("crypto: marvell/cesa - add a new driver for Marvell's CESA") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Vladimir Zapolskiy authored
commit b62917a2 upstream. The change fixes potential oops while accessing iomem on invalid address, if devm_ioremap_resource() fails due to some reason. The devm_ioremap_resource() function returns ERR_PTR() and never returns NULL, which makes useless a following check for NULL. Signed-off-by:
-
Vladimir Zapolskiy authored
commit 9b52d55f upstream. The change fixes potential oops while accessing iomem on invalid address, if devm_ioremap_resource() fails due to some reason. The devm_ioremap_resource() function returns ERR_PTR() and never returns NULL, which makes useless a following check for NULL. Signed-off-by:
-
Dan Carpenter authored
commit 2b8b28fd upstream. We're clearing the wrong memory. The memory corruption is likely harmless because we weren't going to use that stack memory again but not zeroing is a potential information leak. Fixes: e28facde ('crypto: keywrap - add key wrapping block chaining mode') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Tom Lendacky authored
commit ce0ae266 upstream. Since a crypto_ahash_import() can be called against a request context that has not had a crypto_ahash_init() performed, the request context needs to be cleared to insure there is no random data present. If not, the random data can result in a kernel oops during crypto_ahash_update(). Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Tom Lendacky authored
commit b31dde2a upstream. Use a local variable for the exported and imported state so that alignment is not an issue. On export, set a local variable from the request context and then memcpy the contents of the local variable to the export memory area. On import, memcpy the import memory area into a local variable and then use the local variable to set the request context. Signed-off-by:
-
Tom Lendacky authored
commit d1662165 upstream. Since the exported information can be exposed to user-space, instead of exporting the entire request context only export the minimum information needed. Signed-off-by:
-
Tom Lendacky authored
commit 952bce97 upstream. Commit 8996eafd ("crypto: ahash - ensure statesize is non-zero") added a check to prevent ahash algorithms from successfully registering if the import and export functions were not implemented. This prevents an oops in the hash_accept function of algif_hash. This commit causes the ccp-crypto module SHA support and AES CMAC support from successfully registering and causing the ccp-crypto module load to fail because the ahash import and export functions are not implemented. Update the CCP Crypto API support to provide import and export support for ahash algorithms. Signed-off-by:
-
Dmitry Tunin authored
commit 75c6aca4 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3472 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1552925Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dmitry Tunin authored
commit 81d90442 upstream. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3014 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1546694Signed-off-by:
-
Dmitry Tunin authored
commit 609574eb upstream. T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3395 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1542564Reported-and-tested-by:
Christopher Simerly <kilikopela29@gmail.com> Signed-off-by:
-
Vladis Dronov authored
commit 836b34a9 upstream. create_fixed_stream_quirk(), snd_usb_parse_audio_interface() and create_uaxx_quirk() functions allocate the audioformat object by themselves and free it upon error before returning. However, once the object is linked to a stream, it's freed again in snd_usb_audio_pcm_free(), thus it'll be double-freed, eventually resulting in a memory corruption. This patch fixes these failures in the error paths by unlinking the audioformat object before freeing it. Based on a patch by Takashi Iwai <tiwai@suse.de> [Note for stable backports: this patch requires the commit 902eb7fd ('ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()')] Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283358Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 902eb7fd upstream. Just a minor code cleanup: unify the error paths. Signed-off-by:
-
Victor Clément authored
commit 0ef21100 upstream. The Microsoft HD-5001 webcam microphone does not support sample rate reading as the HD-5000 one. This results in dmesg errors and sound hanging with pulseaudio. Signed-off-by:
Victor Clément <victor.clement@openmailbox.org> Signed-off-by:
-
Takashi Iwai authored
commit 447d6275 upstream. Add some sanity check codes before actually accessing the endpoint via get_endpoint() in order to avoid the invalid access through a malformed USB descriptor. Mostly just checking bNumEndpoints, but in one place (snd_microii_spdif_default_get()), the validity of iface and altsetting index is checked as well. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125Signed-off-by:
-
Takashi Iwai authored
commit 0f886ca1 upstream. create_fixed_stream_quirk() may cause a NULL-pointer dereference by accessing the non-existing endpoint when a USB device with a malformed USB descriptor is used. This patch avoids it simply by adding a sanity check of bNumEndpoints before the accesses. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125Signed-off-by:
-
Josh Boyer authored
commit 9c6ba456 upstream. The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85Reported-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 7445e45d upstream. SPC 880NC PC camera discussions: http://www.pclinuxos.com/forum/index.php/topic,135688.0.htmlReported-by:
Kikim <klucznik0@op.pl> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Bjørn Mork authored
commit d48d5691 upstream. Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Josh Boyer authored
commit ea6db90e upstream. A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> Signed-off-by:
-
Martyn Welch authored
commit cddc9434 upstream. The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by:
Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by:
-
Oliver Neukum authored
commit c55aee1b upstream. An attack using missing endpoints exists. CVE-2016-3137 Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Oliver Neukum authored
commit 5a07975a upstream. The driver can be crashed with devices that expose crafted descriptors with too few endpoints. See: http://seclists.org/bugtraq/2016/Mar/61Signed-off-by:
-
Oliver Neukum authored
commit 4e9a0b05 upstream. An attack using the lack of sanity checking in probe is known. This patch checks for the existence of a second port. CVE-2016-3136 Signed-off-by:
-
