- 09 Sep, 2020 1 commit
-
-
Hui Wang authored
The Mic connects to the Nid 0x19, but the configuration of Nid 0x19 is not defined to Mic, and also need to set the coeff to enable the auto detection on the Nid 0x19. After this change, the Mic plugging in or plugging out could be detected and could record the sound from the Mic. And the coeff value is suggested by Kailang of Realtek. Cc: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200909020041.8967-1-hui.wang@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 Sep, 2020 1 commit
-
-
Luke D Jones authored
The GX502 requires a few steps to enable the headset i/o: pincfg, verbs to enable and unmute the amp used for headpone out, and a jacksense callback to toggle output via internal or jack using a verb. Signed-off-by: Luke D Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208005 Link: https://lore.kernel.org/r/20200907081959.56186-1-luke@ljones.devSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 03 Sep, 2020 1 commit
-
-
Takashi Iwai authored
There've been quite a few regression reports about the lowered volume (reduced to ca 65% from the previous level) on Lenovo Thinkpad X1 after the commit d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen"). Although the commit itself does the right thing from HD-audio POV in order to have a volume control for bass speakers, it seems that the machine has some secret recipe under the hood. Through experiments, Benjamin Poirier found out that the following routing gives the best result: * DAC1 (NID 0x02) -> Speaker pin (NID 0x14) * DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) & Headphone pin (0x21) * DAC3 (NID 0x06) -> Unused DAC1 seems to have some equalizer internally applied, and you'd get again the output in a bad quality if you connect this to the headphone pin. Hence the headphone is connected to DAC2, which is now shared with the bass speaker pin. DAC3 has no volume amp, hence it's not connected at all. For achieving the routing above, this patch introduced a couple of workarounds: * The connection list of bass speaker pin (NID 0x17) is reduced not to include DAC3 (NID 0x06) * Pass preferred_pairs array to specify the fixed connection Here, both workarounds are needed because the generic parser prefers the individual DAC assignment over others. When the routing above is applied, the generic parser creates the two volume controls "Front" and "Bass Speaker". Since we have only two DACs for three output pins, those are not fully controlling each output individually, and it would confuse PulseAudio. For avoiding the pitfall, in this patch, we rename those volume controls to some unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and concentrate only on the still good-working "Master" volume control. If a user still wants to control each DAC volume, they can still change manually via "DAC1" and "DAC2" volume controls. Fixes: d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276 Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 02 Sep, 2020 15 commits
-
-
Pierre-Louis Bossart authored
We use HDaudio and HDAudio, pick one to make searches easier. No functionality change Also fix timestamping typo in documentation. Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200902154250.1440585-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Pierre-Louis Bossart authored
On SKL+ Intel platforms, the driver selection is handled by the snd_intel_dspcfg, and when the HDaudio legacy driver is not selected, be it with the auto-selection or user preferences with a kernel parameter, the probe aborts with no logs, only a -ENODEV return value. Having no dmesg trace, even with dynamic debug enabled, makes support more complicated than it needs to be, and even experienced users can be fooled. A simple dev_dbg() trace solves this problem. BugLink: https://github.com/thesofproject/linux/issues/2330Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200902154239.1440537-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Rander Wang authored
In snd_hdac_device_init pm_runtime_set_active is called to increase child_count in parent device. But when it is failed to build connection with GPU for one case that integrated graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be invoked to clean up a HD-audio extended codec base device. At this time the child_count of parent is not decreased, which makes parent device can't get suspended. This patch calls pm_runtime_set_suspended to decrease child_count in parent device in snd_hdac_device_exit to match with snd_hdac_device_init. pm_runtime_set_suspended can make sure that it will not decrease child_count if the device is already suspended. Signed-off-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Rander Wang authored
Add Rocketlake HDMI codec support. Rocketlake shares the pin-to-port mapping table with Tigerlake. Signed-off-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200902154207.1440393-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Pull tasklet API conversions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200902040221.354941-11-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200902040221.354941-10-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200902040221.354941-9-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200902040221.354941-8-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200902040221.354941-7-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200902040221.354941-6-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200902040221.354941-5-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200902040221.354941-4-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200902040221.354941-3-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200902040221.354941-2-allen.lkml@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 01 Sep, 2020 1 commit
-
-
Takashi Iwai authored
The PCM OSS mulaw plugin has a check of the format of the counter part whether it's a linear format. The check is with snd_BUG_ON() that emits WARN_ON() when the debug config is set, and it confuses syzkaller as if it were a serious issue. Let's drop snd_BUG_ON() for avoiding that. While we're at it, correct the error code to a more suitable, EINVAL. Reported-by: syzbot+23b22dc2e0b81cbfcc95@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200901131802.18157-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 29 Aug, 2020 1 commit
-
-
Dan Crawford authored
Following Christian Lachner's patch for Gigabyte X570-based motherboards, also patch the MSI X570-A PRO motherboard; the ALC1220 codec requires the same workaround for Clevo laptops to enforce the DAC/mixer connection path. Set up a quirk entry for that. I suspect most if all X570 motherboards will require similar patches. [ The entries reordered in the SSID order -- tiwai ] Related buglink: https://bugzilla.kernel.org/show_bug.cgi?id=205275Signed-off-by: Dan Crawford <dnlcrwfrd@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200829024946.5691-1-dnlcrwfrd@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 Aug, 2020 4 commits
-
-
Kai Vehmanen authored
When system is suspended with active audio playback to HDMI/DP, two alternative sequences can happen at resume: a) monitor is detected first and ALSA prepare follows normal stream setup sequence, or b) ALSA prepare is called first, but monitor is not yet detected, so PCM is restarted without a pin, In case of (b), on i915 systems, haswell_verify_D0() is not called at resume and the pin power state may be incorrect. Result is lack of audio after resume with no error reported back to user-space. Fix the problem by always verifying converter and pin state in the i915_pin_cvt_fixup(). BugLink: https://github.com/thesofproject/linux/issues/2388Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrien Crivelli authored
The Galaxy Book Ion NT950XCJ-X716A (15 inches) uses the same ALC298 codec as other Samsung laptops which have the no headphone sound bug. I confirmed on my own hardware that this fixes the bug. This also correct the model name for the 13 inches version. It was incorrectly referenced as NT950XCJ-X716A in commit e17f02d0. But it should have been NP930XCJ-K01US. Fixes: e17f02d0 ("ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423Signed-off-by: Adrien Crivelli <adrien.crivelli@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826084014.211217-1-adrien.crivelli@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
František Kučera authored
This patch extends support for DJM-250MK2 and allows recording. However, DVS is not possible yet (see the comment in code). Signed-off-by: František Kučera <franta-linux@frantovo.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200825153113.6352-1-konference@frantovo.czSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Joshua Sivec authored
This uses the same quirk as the Motu and SSL2 devices. Tested on the UR22C. Fixes bug 208851. Signed-off-by: Joshua Sivec <sivec@posteo.net> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208851 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200825165515.8239-1-sivec@posteo.netSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 25 Aug, 2020 4 commits
-
-
Tiezhu Yang authored
This reverts commit 61eee4a7 ("ALSA: hda: Add support for Loongson 7A1000 controller") to fix the following error on the Loongson LS7A platform: rcu: INFO: rcu_preempt self-detected stall on CPU <SNIP> NMI backtrace for cpu 0 CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3 Hardware name: , BIOS Workqueue: events azx_probe_work [snd_hda_intel] <SNIP> Call Trace: [<ffffffff80211a64>] show_stack+0x9c/0x130 [<ffffffff8065a740>] dump_stack+0xb0/0xf0 [<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140 [<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200 [<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190 [<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8 [<ffffffff802b91d4>] update_process_times+0x2c/0xb8 [<ffffffff802cad80>] tick_sched_timer+0x40/0xb8 [<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0 [<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8 [<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0 [<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198 [<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90 [<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8 [<ffffffff80296124>] generic_handle_irq+0x44/0x60 [<ffffffff80b3cfd0>] do_IRQ+0x18/0x28 [<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100 [<ffffffff80209a20>] handle_int+0x140/0x14c [<ffffffff802402e8>] irq_exit+0xf8/0x100 Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA controller, it needs some workarounds which are not merged into the upstream kernel at this time, so it should revert this patch now. Fixes: 61eee4a7 ("ALSA: hda: Add support for Loongson 7A1000 controller") Cc: <stable@vger.kernel.org> # 5.9-rc1+ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1598348388-2518-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Mohan Kumar authored
The WAKEEN bits are used to indicate which bits in the STATESTS register may cause wake event during the codec state change request. Configure the WAKEEN register for the Tegra to detect the wake events. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Acked-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20200825052415.20626-3-mkumard@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Mohan Kumar authored
The Tegra HDA codec HW implementation has an issue related to not swapping the 2 channel Audio Sample Packet(ASP) channel mapping. Whatever the FL and FR mapping specified the left channel always comes out of left speaker and right channel on right speaker. So add condition to disallow the swapping of FL,FR during the playback. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Acked-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Tong Zhang authored
snd_ca0106_spi_write() returns 1 on error, snd_ca0106_pcm_power_dac() is returning the error code directly, and the caller is expecting an negative error code Signed-off-by: Tong Zhang <ztong0001@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200824224541.1260307-1-ztong0001@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 24 Aug, 2020 1 commit
-
-
Randy Dunlap authored
Fix documentation build warnings for underline length too short, caused by s/http/https/ and not changing the accompanying underlines. Documentation/sound/cards/audigy-mixer.rst:335: WARNING: Title underline too short. US Patents (https://www.uspto.gov/) ---------------------------------- Documentation/sound/cards/sb-live-mixer.rst:340: WARNING: Title underline too short. US Patents (https://www.uspto.gov/) ---------------------------------- Fixes: 7ed33ea6 ("ALSA: Replace HTTP links with HTTPS ones") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/357ee576-32a2-6e2b-1db6-78be39253846@infradead.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 23 Aug, 2020 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Add perf support for emitting extended registers for power10. - A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait long enough for the CPU to be offlined, leading to crashes. - Addition of a raw cputable entry for Power10, which is not required to boot, but is required to make our PMU setup work correctly in guests. - Three fixes for the recent changes on 32-bit Book3S to move modules into their own segment for strict RWX. - A fix for a recent change in our powernv PCI code that could lead to crashes. - A change to our perf interrupt accounting to avoid soft lockups when using some events, found by syzkaller. - A change in the way we handle power loss events from the hypervisor on pseries. We no longer immediately shut down if we're told we're running on a UPS. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde. * tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000 powerpc/pseries: Do not initiate shutdown when system is running on UPS powerpc/perf: Fix soft lockups due to missed interrupt accounting powerpc/powernv/pci: Fix possible crash when releasing DMA resources powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32 powerpc/fixmap: Fix the size of the early debug area powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled powerpc/kernel: Cleanup machine check function declarations powerpc: Add POWER10 raw mode cputable entry powerpc/perf: Add extended regs support for power10 platform powerpc/perf: Add support for outputting extended regs in perf intr_regs powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for x86 which removes the RDPID usage from the paranoid entry path and unconditionally uses LSL to retrieve the CPU number. RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values and restores them either when leaving the run loop, on preemption or when going out to user space. MSR_TSX_AUX is part of that lazy MSR set, so after writing the guest value and before the lazy restore any exception using the paranoid entry will read the guest value and use it as CPU number to retrieve the GSBASE value for the current CPU when FSGSBASE is enabled. As RDPID is only used in that particular entry path, there is no reason to burden VMENTER/EXIT with two extra MSR writes. Remove the RDPID optimization, which is not even backed by numbers from the paranoid entry path instead" * tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Thomas Gleixner: "A single update for perf on x86 which has support for the broken down bandwith counters" * tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: - Enforce NX on RO data in mixed EFI mode - Destroy workqueue in an error handling path to prevent UAF - Stop argument parser at '--' which is the delimiter for init - Treat a NULL command line pointer as empty instead of dereferncing it unconditionally. - Handle an unterminated command line correctly - Cleanup the 32bit code leftovers and remove obsolete documentation * tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: efi: remove description of efi=old_map efi/x86: Move 32-bit code into efi_32.c efi/libstub: Handle unterminated cmdline efi/libstub: Handle NULL cmdline efi/libstub: Stop parsing arguments at "--" efi: add missed destroy_workqueue when efisubsys_init fails efi/x86: Mark kernel rodata non-executable for mixed mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull entry fix from Thomas Gleixner: "A single bug fix for the common entry code. The transcription of the x86 version messed up the reload of the syscall number from pt_regs after ptrace and seccomp which breaks syscall number rewriting" * tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: core/entry: Respect syscall number rewrites
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "A single fix correcting a reversed error severity determination check which lead to a recoverable error getting marked as fatal, by Tony Luck" * tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Nothing earth shattering here, lots of small fixes (f.e. missing RCU protection, bad ref counting, missing memset(), etc.) all over the place: 1) Use get_file_rcu() in task_file iterator, from Yonghong Song. 2) There are two ways to set remote source MAC addresses in macvlan driver, but only one of which validates things properly. Fix this. From Alvin Šipraga. 3) Missing of_node_put() in gianfar probing, from Sumera Priyadarsini. 4) Preserve device wanted feature bits across multiple netlink ethtool requests, from Maxim Mikityanskiy. 5) Fix rcu_sched stall in task and task_file bpf iterators, from Yonghong Song. 6) Avoid reset after device destroy in ena driver, from Shay Agroskin. 7) Missing memset() in netlink policy export reallocation path, from Johannes Berg. 8) Fix info leak in __smc_diag_dump(), from Peilin Ye. 9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark Tomlinson. 10) Fix number of data stream negotiation in SCTP, from David Laight. 11) Fix double free in connection tracker action module, from Alaa Hleihel. 12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) net: nexthop: don't allow empty NHA_GROUP bpf: Fix two typos in uapi/linux/bpf.h net: dsa: b53: check for timeout tipc: call rcu_read_lock() in tipc_aead_encrypt_done() net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow net: sctp: Fix negotiation of the number of data streams. dt-bindings: net: renesas, ether: Improve schema validation gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit() hv_netvsc: Remove "unlikely" from netvsc_select_queue bpf: selftests: global_funcs: Check err_str before strstr bpf: xdp: Fix XDP mode when no mode flags specified selftests/bpf: Remove test_align leftovers tools/resolve_btfids: Fix sections with wrong alignment net/smc: Prevent kernel-infoleak in __smc_diag_dump() sfc: fix build warnings on 32-bit net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified" libbpf: Fix map index used in error message net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe() net: atlantic: Use readx_poll_timeout() for large timeout ...
-
Kai-Heng Feng authored
If USB autosuspend is enabled, both front and rear panel can no longer detect jack insertion. Enable USB remote wakeup, i.e. needs_remote_wakeup = 1, doesn't help either. So disable USB autosuspend to prevent missing jack detection event. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200823105854.26950-1-kai.heng.feng@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Avid Adrenaline is reported that ALSA firewire-digi00x driver is bound to. However, as long as he investigated, the design of this model is hardly similar to the one of Digi 00x family. It's better to exclude the model from modalias of ALSA firewire-digi00x driver. This commit changes device entries so that the model is excluded. $ python3 crpp < ~/git/am-config-rom/misc/avid-adrenaline.img ROM header and bus information block ----------------------------------------------------------------- 400 04203a9c bus_info_length 4, crc_length 32, crc 15004 404 31333934 bus_name "1394" 408 e064a002 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 10 (2048) 40c 00a07e01 company_id 00a07e | 410 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 root directory ----------------------------------------------------------------- 414 0005d08c directory_length 5, crc 53388 418 0300a07e vendor 41c 8100000c --> descriptor leaf at 44c 420 0c008380 node capabilities 424 8d000002 --> eui-64 leaf at 42c 428 d1000004 --> unit directory at 438 eui-64 leaf at 42c ----------------------------------------------------------------- 42c 0002410f leaf_length 2, crc 16655 430 00a07e01 company_id 00a07e | 434 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 unit directory at 438 ----------------------------------------------------------------- 438 0004d6c9 directory_length 4, crc 54985 43c 1200a02d specifier id: 1394 TA 440 13014001 version: Vender Unique and AV/C 444 17000001 model 448 81000009 --> descriptor leaf at 46c descriptor leaf at 44c ----------------------------------------------------------------- 44c 00077205 leaf_length 7, crc 29189 450 00000000 textual descriptor 454 00000000 minimal ASCII 458 41766964 "Avid" 45c 20546563 " Tec" 460 686e6f6c "hnol" 464 6f677900 "ogy" 468 00000000 descriptor leaf at 46c ----------------------------------------------------------------- 46c 000599a5 leaf_length 5, crc 39333 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 41647265 "Adre" 47c 6e616c69 "nali" 480 6e650000 "ne" Reported-by: Simon Wood <simon@mungewell.org> Fixes: 9edf723f ("ALSA: firewire-digi00x: add skeleton for Digi 002/003 family") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200823075545.56305-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Tascam FE-8 is known to support communication by asynchronous transaction only. The support can be implemented in userspace application and snd-firewire-ctl-services project has the support. However, ALSA firewire-tascam driver is bound to the model. This commit changes device entries so that the model is excluded. In a commit 53b3ffee ("ALSA: firewire-tascam: change device probing processing"), I addressed to the concern that version field in configuration differs depending on installed firmware. However, as long as I checked, the version number is fixed. It's safe to return version number back to modalias. Fixes: 53b3ffee ("ALSA: firewire-tascam: change device probing processing") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200823075537.56255-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-