- 20 Apr, 2018 3 commits
-
-
Daniel Vetter authored
The definitions for the error register should be valid on bdw/skl too, but there we haven't even enabled DE_MISC handling yet. Somewhat confusing the the moved register offset on bdw is only for the _CTL/_AUX register, and that _IIR/IMR stayed where they have been on bdw. v2: Fixes from Ville. v3: From DK * Rebased on drm-tip * Removed BDW IIR bit definition, looks like an unintentional change that should be in the following patch. v4: From DK * Don't mask REG_WRITE. References: bspec/11974 [SRD Interrupt Bit Definition DevHSW] Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405220023.9449-1-dhinakaran.pandiyan@intel.com
-
Daniel Vetter authored
One is outright unused, other can be made static. Drive-by cleanup while accidentally reading dc code. Cc: Imre Deak <imre.deak@intel.com> Acked-by:
Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Imre Deak authored
The DMC FW specific part of display WA#1183 is supposed to be enabled whenever enabling DC5 or DC6, so move it to the DC6 enable function from the DC6 disable function. I noticed this after Daniel's patch to remove the unused skl_disable_dc6() function. Fixes: 53421c2f ("drm/i915: Apply Display WA #1183 on skl, kbl, and cfl") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419155109.29451-1-imre.deak@intel.com
-
- 19 Apr, 2018 3 commits
-
-
Ville Syrjälä authored
Make the PIPE_CONF_CHECK macros a bit more robust by wrapping them in do {} while(0). Avoids funky sirprises when you try put an 'else' after a PIPE_CONF_CHECK invocation... Signed-off-by: -
Jani Nikula authored
Move the limit checks near the calculations for each field, and actually log the values that exceed limits. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419085940.21505-1-jani.nikula@intel.com
-
Abhay Kumar authored
In GLK when the device boots with only 1366x768 panel without audio, HDA codec doesn't come up. In this case, the CDCLK is less than twice the BCLK. Even though audio isn't being enabled, having a too low CDCLK leads to audio probe failing altogether. Require CDCLK to be at least twice the BLCK regardless of audio. This is a minimal fix to improve things. Unfortunately, this a) leads to too high CDCLK being used when audio is not used, and b) is still not enough to fix audio probe when no outputs are connected at probe time. The proper fix would be to increase CDCLK dynamically from the audio component hooks. v2: - Address comment (Jani) - New design approach v3: - Typo fix on top of v1 v4 by Jani: rewrite commit message, add comment in code Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@gmail.com> Cc: Wenkai Du <wenkai.du@intel.com> Reviewed-by:Wenkai Du <wenkai.du@intel.com> Tested-by:
Abhay Kumar <abhay.kumar@intel.com> Signed-off-by:
-
- 18 Apr, 2018 4 commits
-
-
Chris Wilson authored
Today we only want to pass along the priority to engine->schedule(), but in the future we want to have much more control over the various aspects of the GPU during a context's execution, for example controlling the frequency allowed. As we need an ever growing number of parameters for scheduling, move those into a struct for convenience. v2: Move the anonymous struct into its own function for legibility and ye olde gcc. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Having moved the priotree struct into i915_scheduler.h, identify it as the scheduling element and rebrand into i915_sched. This becomes more useful as we start attaching more information we require to propagate through the scheduler. v2: Use i915_sched_node for future distinctiveness Signed-off-by:
-
Chris Wilson authored
Over time the priotree has grown from a sorted list to a more complicated structure for propagating constraints along the dependency chain to try and resolve priority inversion. Start to segregate this information from the rest of the request/fence tracking. Signed-off-by:
-
Gaurav K Singh authored
On Geminilake, sometimes audio card is not getting detected after reboot. This is a spurious issue happening on Geminilake. HW codec and HD audio controller link was going out of sync for which there was a fix in i915 driver but was not getting invoked for GLK. Extending this fix to GLK as well. Tested by Du,Wenkai on GLK board. Bspec: 21829 v2: Instead of checking GEN9_BC, BXT and GLK macros, use IS_GEN9 macro (Jani N) Cc: <stable@vger.kernel.org> # b651bd2a ("drm/i915/audio: Fix audio enumeration issue on BXT") Cc: <stable@vger.kernel.org> Signed-off-by:
Gaurav K Singh <gaurav.k.singh@intel.com> Reviewed-by:
-
- 17 Apr, 2018 1 commit
-
-
Oscar Mateo authored
Silence smatch over: drivers/gpu/drm/i915/selftests/intel_workarounds.c:58 read_nonprivs() error: 'cs' dereferencing possible ERR_PTR() by handling a potential (but unlikely) failure of intel_ring_begin. Fixes: f4ecfbfc ("drm/i915: Check whitelist registers across resets") Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
- 14 Apr, 2018 2 commits
-
-
Chris Wilson authored
We have to cleanup after i915_perf_init(), even on the error path, as it passes a pointer into the module to the sysfs core. If we fail to unregister the sysctl table, we leave a dangling pointer which then may explode anytime later. Fixes: 9f9b2792 ("drm/i915/perf: reuse timestamp frequency from device info") Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180414091233.32224-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Add a selftest to ensure that we restore the whitelisted registers after rewrite the registers everytime they might be scrubbed, e.g. module load, reset and resume. For the other volatile workaround registers, we export their presence via debugfs and check in igt/gem_workarounds. However, we don't export the whitelist and rather than do so, let's test them directly in the kernel. The test we use is to read the registers back from the CS (this helps us be sure that the registers will be valid for MI_LRI etc). In order to generate the expected list, we split intel_whitelist_workarounds_emit into two phases, the first to build the list and the second to apply. Inside the test, we only build the list and then check that list against the hw. v2: Filter out pre-gen8 as they do not have RING_NONPRIV. v3: Drop unused engine parameter, no plans to use it now or future. Signed-off-by:
-
- 13 Apr, 2018 3 commits
-
-
Piorkowski, Piotr authored
It looks that GuC does not actively use GUC_CTL_DEVICE_INFO parameter where we are passing GT type and Core family values. Let's stop/remove setup of this parameter and remove related definitions. v2: (this time without squashed HAX) - New title and description - Remove also GUC_CORE_FAMILY_* definitions (Michel) v3: - The removed define GUC_CTL_DEVICE_INFO has been restored (Michel) - Updated description (Sagar) v4: rebase Signed-off-by:
Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: John A Spotswood <john.a.spotswood@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Acked-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Jani Nikula authored
Signed-off-by: -
Mika Kuoppala authored
Evidence indicates that Cannonlake HWSP is not coherent as it should. Revert to using mmio access for now. Testcase: igt/gem_ctx_switch References: https://bugs.freedesktop.org/show_bug.cgi?id=105888 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by:
-
- 12 Apr, 2018 2 commits
-
-
Jani Nikula authored
No functional changes. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Jani Nikula authored
The VBT contains the DDC pin to use for specific ports. Alas, sometimes the field appears to contain bogus data, and while we check for it later on in intel_gmbus_get_adapter() we fail to check the returned NULL on errors. Oops results. The simplest approach seems to be to catch and ignore the bogus DDC pins already at the VBT parsing phase, reverting to fixed per port default pins. This doesn't guarantee display working, but at least it prevents the oops. And we continue to be fuzzed by VBT. One affected machine is Dell Latitude 5590 where a BIOS upgrade added invalid DDC pins. Typical backtrace: [ 35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin)) [ 35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461450] Workqueue: events_unbound async_run_entry_fn [ 35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286 [ 35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960 [ 35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246 [ 35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000 [ 35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000 [ 35.461477] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461479] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461486] Call Trace: [ 35.461501] intel_hdmi_set_edid+0x37/0x27f [i915] [ 35.461515] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461518] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461521] drm_setup_crtcs+0x129/0xa6a [ 35.461523] ? __switch_to_asm+0x34/0x70 [ 35.461525] ? __switch_to_asm+0x34/0x70 [ 35.461527] ? __switch_to_asm+0x40/0x70 [ 35.461528] ? __switch_to_asm+0x34/0x70 [ 35.461529] ? __switch_to_asm+0x40/0x70 [ 35.461531] ? __switch_to_asm+0x34/0x70 [ 35.461532] ? __switch_to_asm+0x40/0x70 [ 35.461534] ? __switch_to_asm+0x34/0x70 [ 35.461536] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461538] ? __switch_to_asm+0x40/0x70 [ 35.461541] ? _cond_resched+0x10/0x33 [ 35.461557] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461560] async_run_entry_fn+0x2e/0xf5 [ 35.461563] process_one_work+0x15b/0x364 [ 35.461565] worker_thread+0x2c/0x3a0 [ 35.461567] ? process_one_work+0x364/0x364 [ 35.461568] kthread+0x10c/0x122 [ 35.461570] ? _kthread_create_on_node+0x5d/0x5d [ 35.461572] ret_from_fork+0x35/0x40 [ 35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00 [ 35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915] [ 35.461606] ---[ end trace 4fe1e63e2dd93373 ]--- [ 35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 35.461613] IP: i2c_transfer+0x4/0x86 [ 35.461614] PGD 0 P4D 0 [ 35.461616] Oops: 0000 [#1] SMP PTI [ 35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx [ 35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G W 4.16.0-rc7.x64-g1cda370ffded #1 [ 35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018 [ 35.461628] Workqueue: events_unbound async_run_entry_fn [ 35.461630] RIP: 0010:i2c_transfer+0x4/0x86 [ 35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246 [ 35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001 [ 35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000 [ 35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd [ 35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002 [ 35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07 [ 35.461641] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000 [ 35.461643] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0 [ 35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.461649] Call Trace: [ 35.461652] drm_do_probe_ddc_edid+0xb3/0x128 [ 35.461654] drm_get_edid+0xe5/0x38d [ 35.461669] intel_hdmi_set_edid+0x45/0x27f [i915] [ 35.461684] intel_hdmi_detect+0x7c/0x97 [i915] [ 35.461687] drm_helper_probe_single_connector_modes+0xe1/0x6c0 [ 35.461689] drm_setup_crtcs+0x129/0xa6a [ 35.461691] ? __switch_to_asm+0x34/0x70 [ 35.461693] ? __switch_to_asm+0x34/0x70 [ 35.461694] ? __switch_to_asm+0x40/0x70 [ 35.461696] ? __switch_to_asm+0x34/0x70 [ 35.461697] ? __switch_to_asm+0x40/0x70 [ 35.461698] ? __switch_to_asm+0x34/0x70 [ 35.461700] ? __switch_to_asm+0x40/0x70 [ 35.461701] ? __switch_to_asm+0x34/0x70 [ 35.461703] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f [ 35.461705] ? __switch_to_asm+0x40/0x70 [ 35.461707] ? _cond_resched+0x10/0x33 [ 35.461724] intel_fbdev_initial_config+0xf/0x1c [i915] [ 35.461727] async_run_entry_fn+0x2e/0xf5 [ 35.461729] process_one_work+0x15b/0x364 [ 35.461731] worker_thread+0x2c/0x3a0 [ 35.461733] ? process_one_work+0x364/0x364 [ 35.461734] kthread+0x10c/0x122 [ 35.461736] ? _kthread_create_on_node+0x5d/0x5d [ 35.461738] ret_from_fork+0x35/0x40 [ 35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65 [ 35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30 [ 35.461757] CR2: 0000000000000010 [ 35.461759] ---[ end trace 4fe1e63e2dd93374 ]--- Based on a patch by Fei Li. v2: s/reverting/sticking/ (Chris) Cc: stable@vger.kernel.org Cc: Fei Li <fei.li@intel.com> Co-developed-by:
Fei Li <fei.li@intel.com> Reported-by:
Pavel Nakonechnyi <zorg1331@gmail.com> Reported-and-tested-by:
Seweryn Kokot <sewkokot@gmail.com> Reported-and-tested-by:
Laszlo Valko <valko@linux.karinthy.hu> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961Reviewed-by:
-
- 11 Apr, 2018 5 commits
-
-
Oscar Mateo authored
There are different kind of workarounds (those that modify registers that live in the context image, those that modify global registers, those that whitelist registers, etc...) and they have different requirements in terms of where they are applied and how. Also, by splitting them apart, it should be easier to decide where a new workaround should go. v2: - Add multiple MISSING_CASE - Rebased v3: - Rename mmio_workarounds to gt_workarounds (Chris, Mika) - Create empty placeholders for BDW and CHV GT WAs - Rebased v4: Rebased v5: - Rebased - FORCE_TO_NONPRIV register exists since BDW, so make a path for it to achieve universality, even if empty (Chris) Signed-off-by:
-
Oscar Mateo authored
This has grown to be a sizable amount of code, so move it to its own file before we try to refactor anything. For the moment, we are leaving behind the WA BB code and the WAs that get applied (incorrectly) in init_clock_gating, but we will deal with it later. v2: Use intel_ prefix for code that deals with the hardware (Chris) v3: Rebased v4: - Rebased - New license header v5: - Rebased - Added some organisational notes to the file (Chris) v6: Include DOC section in the documentation build (Jani) Signed-off-by:
-
Chris Wilson authored
We can refine our current execlists->queue_priority if we inspect ELSP[1] rather than the head of the unsubmitted queue. Currently, we use the unsubmitted queue and say that if a subsequent request is more important than the current queue, we will rerun the submission tasklet to evaluate the need for preemption. However, we only want to preempt if we need to jump ahead of a currently executing request in ELSP. The second reason for running the submission tasklet is amalgamate requests into the active context on ELSP[0] to avoid a stall when ELSP[0] drains. (Though repeatedly amalgamating requests into the active context and triggering many lite-restore is off question gain, the goal really is to put a context into ELSP[1] to cover the interrupt.) So if instead of looking at the head of the queue, we look at the context in ELSP[1] we can answer both of the questions more accurately -- we don't need to rerun the submission tasklet unless our new request is important enough to feed into, at least, ELSP[1]. v2: Add some comments from the discussion with Tvrtko. v3: More commentary to cross-reference queue_request() References: f6322edd ("drm/i915/preemption: Allow preemption between submission ports") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411103929.27374-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Apparently caused by a merge fail at some point. Due to the nature of the duplicated block, the second one will have no effect, and there's no need to backport. Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests on some CI machines I have concluded that: a) the PMU readout of RC6 can race against runtime PM transitions, and b) there are other reasons than being runtime suspended which can cause intel_runtime_pm_get_if_in_use to fail. Therefore when estimating RC6 the code needs to assert we are indeed in suspended state, and if not, the best we can do is return the last known RC6 value. Without this check we can calculate the estimated value based on un- initialized or inappropriate internal state, which can result in over- estimation, or in any case incorrect value being returned. v2: * Re-arrange the code a bit to avoid second unlock and return branch. (Chris Wilson) v3: * Insert some strategic blank lines and improve commit msg. (Chris Wilson) Signed-off-by:
-
- 10 Apr, 2018 5 commits
-
-
Chris Wilson authored
%phn is not a valid specifier, and the trailing 'n' is being eaten by the format-specifier and defaulting to the ' ' separator. Avoid angering smatch by using the unknown specifier, and use the default we expect. drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:616 ctb_read() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:669 ct_handle_response() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:679 ct_handle_response() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:693 ct_handle_response() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:707 ct_handle_response() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:727 ct_process_request() warn: '%ph' cannot be followed by 'n' drivers/gpu/drm/i915/intel_guc_ct.c:803 ct_handle_request() warn: '%ph' cannot be followed by 'n' Signed-off-by:
-
Chris Wilson authored
Resetting the GPU doesn't affect the RPS/RC6 state, so we can stop forcibly reloading the registers. Ville suggested this many moons ago, I said at that time that sanitizing was no harm and meant that our bookkeeping was kept consistent with the HW. However, in a forthcoming series, we want to split rps/rc6 GT powermanagement and one of the key simplifications is the control of when we enable it. Performing a crude sanitize in the middle of i915_gem_reset() is then a huge wart. Suggested-by:
-
Maarten Lankhorst authored
Adding a i915_fifo_underrun_reset debugfs file will make it possible for IGT tests to clear FIFO underrun fallout at the start of each subtest, and make re-enable FBC so tests always have maximum exposure to features used by IGT. FIFO underruns and FBC bugs will no longer hide when an earlier subtests disables both. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=105685 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105681 Link: https://patchwork.freedesktop.org/patch/msgid/20180328100526.36467-1-maarten.lankhorst@linux.intel.comAcked-by:
Jani Nikula <jani.nikula@linux.intel.com> [mlankhorst: Reset FBC reason if underrun had occurred. (vivijim)] Reviewed-by:
-
Chris Wilson authored
Inside the psr work function, we want to wait for PSR to idle first and wish to do so without blocking the normal modeset path, so we do so without holding the PSR lock. However, we first have to find which pipe PSR was enabled on, which requires chasing into the PSR struct and requires locking to prevent intel_psr_disable() from concurrently setting our pointer to NULL. Fixes: 995d3047 ("drm/i915: VLV/CHV PSR Software timer mode") Signed-off-by:
-
Imre Deak authored
On GLK sporadic timeouts occur during PHY0 enabling. Based on logs it looks like they happen sometime after a system suspend/resume cycle, with the same power well enabling succeeding both before and after the failed one and no other problems observed. The current timeout in the code is not actually specified by BSpec, so let's try to increase that until a BSpec update. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771Signed-off-by:
-
- 09 Apr, 2018 12 commits
-
-
Maarten Lankhorst authored
All the references to get_existing_state can be converted to get_new_state or get_old_state, which means that i915 is now get_existing_state free. Signed-off-by:
-
Maarten Lankhorst authored
get_existing_crtc_state is currently unused, get rid of it. Signed-off-by:
-
Maarten Lankhorst authored
The get_existing macros are deprecated and should be replaced by get_old/new_state for clarity. Signed-off-by:
-
Tvrtko Ursulin authored
Include fence context and seqno in low level tracing so it is easier to follow flows of individual requests when things go bad. Also added tracing on the reset side of things. v2: Chris Wilson: * Standardize global_seqno and seqno as global. * Include current hws seqno in execlists_cancel_port_requests. v3: * Fix port printk format for all builds. Signed-off-by:
-
Tvrtko Ursulin authored
Enclose for_each_engine_masked macro arguments in parentheses. v2: * Fixup whitespace to satisfy checkpatch. * Likewise reformat to 80 chars. Signed-off-by:
-
Chandra Konduru authored
This patch updates scaler max limit support for NV12 v2: Rebased (me) v3: Rebased (me) v4: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. v5: Addressed review comments from Ville and rebased - calculation of max_scale to be made less convoluted by splitting it up a bit - Indentation errors to be fixed in the series v6: Rebased (me) Fixed review comments from Paauwe, Bob J Previous version, where a split of calculation was done, was wrong. Fixed that issue here. v7: Rebased (me) v8: Rebased (me) v9: Rebased (me) v10: Rebased (me) v11: Addressed review comments from Shashank Sharma Alignment issues fixed. When call to skl_update_scaler is made, 0 was being sent instead of pixel_format. When crtc update scaler is called, we dont have the fb to derive the pixel format. Added the function parameter bool plane_scaler_check to account for this. v12: Fixed failure in IGT debugfs_test. fb is NULL in skl_update_scaler_plane Due to this, accessing fb->format caused failure. Patch checks fb before using. v13: In the previous version there was a flaw. In skl_update_scaler during plane_scaler_check if the format was non-NV12, it would set need_scaling to false. This could reset the previously set need_scaling from a previous condition check. Patch fixes this. Patch also adds minimum src height for YUV 420 formats to 16 (as defined in BSpec) and adds for checking this range. v14: Addressed review comments from Maarten Just add a check for NV12 min src height in skl_update_scaler and retain the remaining checks as is. Added Reviewed By from Juha-Pekka Heikkila. v15: Rebased the series. v16: Changed fb height restriction to be >= 16 as per Bspec. Earlier it was > 16. v17: Adding src width and height to be mult of 4 restriction to avoid pipe fifo underruns for NV12. Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by:
Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
Chandra Konduru <chandra.konduru@intel.com> Signed-off-by:
Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by:
-
Chandra Konduru authored
This patch adds NV12 to format_is_yuv() function for sprite planes. v2: -Use intel_ prefix for format_is_yuv (Ville) v3: Rebased (me) v4: Rebased and addressed review comments from Clinton A Taylor. "static function in intel_sprite.c is not available to the primary plane functions". Changed commit message - function modified for sprite planes. v5: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. v6: Rebased (me) v7: Rebased (me) v8: Rebased (me) v9: Rebased (me) v10: Changed intel_format_is_yuv function from static to non-static. We need to use it later from other files for check. v11: Rebased the patch. format_is_yuv has already been renamed to intel_format_is_yuv in the color patch series which is already merged. This function which was previously static has already been made non-static. So this patch after rebase just adds NV12 to intel_format_is_yuv function. v12: Added reviewed by from Juha-Pekka Heikkila v13/v14/v15: Rebased the series Tested-by:
Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Chandra Konduru authored
This patch sets appropriate scaler mode for NV12 format. In this mode, skylake scaler does either chroma-upsampling or chroma-upsampling and resolution scaling v2: Review comments from Ville addressed NV12 case to be checked first for setting the scaler v3: Rebased (me) v4: Rebased (me) v5: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version. v6: Rebased (me) v7: Rebased (me) v8: Rebased (me) Restricting the NV12 change for scaler to BXT and KBL in this series. v9: Rebased (me) v10: As of now, NV12 has been tested on Gen9 and Gen10. However, code is applicable to all GEN >= 9. Hence making that change to keep it generic. Comments under v8 is not valid anymore. v11: Addressed review comments by Shashank Sharma. For Gen10+, the scaler mode to be set it planar or normal (single bit). Changed the code to be applicable to all Gen. v12: Addressed review comments from Shashank Sharma For Gen9 (apart from GLK) bits 28:29 to be programmed in PS_CTRL for NV12. For GLK and Gen10+, bit 29 to be set for all Planar. v13: Addressed review comments from Juha-Pekka Heikkila "NV12 not to be supported by SKL" Adding Reviewed by tag from Shashank Shamr v14: Added reviewed by from Juha-Pekka Heikkila v15: Rebased the series Tested-by:
-
Vidya Srinivas authored
If the fb format is YUV, enable the plane CSC mode bits for the conversion. v2: Addressed review comments from Shashank Sharma Alignment issue fixed in i915_reg.h v3: Adding Reviewed By from Shashank Sharma v4: Rebased the patch. As part of rebasing, re-using the color series defines which are already merged. plane_state->base.color_encoding might not be set for NV12. For now, just using PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709 in glk_plane_color_ctl if format is NV12. v5: Added reviewed by from Juha-Pekka Heikkila v6: Rebased the series Reviewed-by:
-
Vidya Srinivas authored
Display WA 827 applies to GEN9 (excluede GLK) and CNL. Switching the plane format from NV12 to RGB and leaving system idle results in display underrun and corruption. WA: Set the bit 15 & bit 19 to 1b in the CLKGATE_DIS_PSL register for the pipe in which NV12 plane is enabled. v2: Addressed review comments from Maarten and Juha-Pekka Heikkila. Added reviewed by from Juha-Pekka Heikkila. v3: Rebased the series Reviewed-by:
-
Mahesh Kumar authored
This patch splits skl_compute_wm/ddb functions into two parts. One adds all affected pipes after the commit to atomic_state structure and second part does compute the DDB. v2: Added reviewed by tag from Shashank Sharma v3: Added reviewed by from Juha-Pekka Heikkila v4: Rebased the series v5: Fixed checkpatch error. Changed *changed = true to (*changed) = true; Reviewed-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
-
Mahesh Kumar authored
Display Workaround #0826 (SKL:ALL BXT:ALL) & #1059(CNL:A) Hardware sometimes fails to wake memory from pkg C states fetching the last few lines of planar YUV 420 (NV12) planes. This causes intermittent underflow and corruption. WA: Disable package C states or do not enable latency levels 1 through 7 (WM1 - WM7) on NV12 planes. v2: Addressed review comments by Maarten. v3: Adding reviewed by tag from Shashank Sharma v4: Added reviewed by from Juha-Pekka Heikkila v5: Rebased the series Reviewed-by:
-
