- 19 Jun, 2019 25 commits
-
-
Eric W. Biederman authored
commit f6e2aa91 upstream. Recently syzbot in conjunction with KMSAN reported that ptrace_peek_siginfo can copy an uninitialized siginfo to userspace. Inspecting ptrace_peek_siginfo confirms this. The problem is that off when initialized from args.off can be initialized to a negaive value. At which point the "if (off >= 0)" test to see if off became negative fails because off started off negative. Prevent the core problem by adding a variable found that is only true if a siginfo is found and copied to a temporary in preparation for being copied to userspace. Prevent args.off from being truncated when being assigned to off by testing that off is <= the maximum possible value of off. Convert off to an unsigned long so that we should not have to truncate args.off, we have well defined overflow behavior so if we add another check we won't risk fighting undefined compiler behavior, and so that we have a type whose maximum value is easy to test for. Cc: Andrei Vagin <avagin@gmail.com> Cc: stable@vger.kernel.org Reported-by: syzbot+0d602a1b0d8c95bdf299@syzkaller.appspotmail.com Fixes: 84c751bd ("ptrace: add ability to retrieve signals without removing from a queue (v4)") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minchan Kim authored
commit a58f2cef upstream. There was the below bug report from Wu Fangsuo. On the CMA allocation path, isolate_migratepages_range() could isolate unevictable LRU pages and reclaim_clean_page_from_list() can try to reclaim them if they are clean file-backed pages. page:ffffffbf02f33b40 count:86 mapcount:84 mapping:ffffffc08fa7a810 index:0x24 flags: 0x19040c(referenced|uptodate|arch_1|mappedtodisk|unevictable|mlocked) raw: 000000000019040c ffffffc08fa7a810 0000000000000024 0000005600000053 raw: ffffffc009b05b20 ffffffc009b05b20 0000000000000000 ffffffc09bf3ee80 page dumped because: VM_BUG_ON_PAGE(PageLRU(page) || PageUnevictable(page)) page->mem_cgroup:ffffffc09bf3ee80 ------------[ cut here ]------------ kernel BUG at /home/build/farmland/adroid9.0/kernel/linux/mm/vmscan.c:1350! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 7125 Comm: syz-executor Tainted: G S 4.14.81 #3 Hardware name: ASR AQUILAC EVB (DT) task: ffffffc00a54cd00 task.stack: ffffffc009b00000 PC is at shrink_page_list+0x1998/0x3240 LR is at shrink_page_list+0x1998/0x3240 pc : [<ffffff90083a2158>] lr : [<ffffff90083a2158>] pstate: 60400045 sp : ffffffc009b05940 .. shrink_page_list+0x1998/0x3240 reclaim_clean_pages_from_list+0x3c0/0x4f0 alloc_contig_range+0x3bc/0x650 cma_alloc+0x214/0x668 ion_cma_allocate+0x98/0x1d8 ion_alloc+0x200/0x7e0 ion_ioctl+0x18c/0x378 do_vfs_ioctl+0x17c/0x1780 SyS_ioctl+0xac/0xc0 Wu found it's due to commit ad6b6704 ("mm: remove SWAP_MLOCK in ttu"). Before that, unevictable pages go to cull_mlocked so that we can't reach the VM_BUG_ON_PAGE line. To fix the issue, this patch filters out unevictable LRU pages from the reclaim_clean_pages_from_list in CMA. Link: http://lkml.kernel.org/r/20190524071114.74202-1-minchan@kernel.org Fixes: ad6b6704 ("mm: remove SWAP_MLOCK in ttu") Signed-off-by:
Minchan Kim <minchan@kernel.org> Reported-by:
Wu Fangsuo <fangsuowu@asrmicro.com> Debugged-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Pankaj Suryawanshi <pankaj.suryawanshi@einfochips.com> Cc: <stable@vger.kernel.org> [4.12+] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Wengang Wang authored
commit be99ca27 upstream. ocfs2_dentry_attach_lock() can be executed in parallel threads against the same dentry. Make that race safe. The race is like this: thread A thread B (A1) enter ocfs2_dentry_attach_lock, seeing dentry->d_fsdata is NULL, and no alias found by ocfs2_find_local_alias, so kmalloc a new ocfs2_dentry_lock structure to local variable "dl", dl1 ..... (B1) enter ocfs2_dentry_attach_lock, seeing dentry->d_fsdata is NULL, and no alias found by ocfs2_find_local_alias so kmalloc a new ocfs2_dentry_lock structure to local variable "dl", dl2. ...... (A2) set dentry->d_fsdata with dl1, call ocfs2_dentry_lock() and increase dl1->dl_lockres.l_ro_holders to 1 on success. ...... (B2) set dentry->d_fsdata with dl2 call ocfs2_dentry_lock() and increase dl2->dl_lockres.l_ro_holders to 1 on success. ...... (A3) call ocfs2_dentry_unlock() and decrease dl2->dl_lockres.l_ro_holders to 0 on success. .... (B3) call ocfs2_dentry_unlock(), decreasing dl2->dl_lockres.l_ro_holders, but see it's zero now, panic Link: http://lkml.kernel.org/r/20190529174636.22364-1-wen.gang.wang@oracle.comSigned-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Reported-by:
Daniel Sobe <daniel.sobe@nxp.com> Tested-by:
Changwei Ge <gechangwei@live.cn> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shakeel Butt authored
commit 3510955b upstream. Syzbot reported following memory leak: ffffffffda RBX: 0000000000000003 RCX: 0000000000441f79 BUG: memory leak unreferenced object 0xffff888114f26040 (size 32): comm "syz-executor626", pid 7056, jiffies 4294948701 (age 39.410s) hex dump (first 32 bytes): 40 60 f2 14 81 88 ff ff 40 60 f2 14 81 88 ff ff @`......@`...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: slab_post_alloc_hook mm/slab.h:439 [inline] slab_alloc mm/slab.c:3326 [inline] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 kmalloc include/linux/slab.h:547 [inline] __memcg_init_list_lru_node+0x58/0xf0 mm/list_lru.c:352 memcg_init_list_lru_node mm/list_lru.c:375 [inline] memcg_init_list_lru mm/list_lru.c:459 [inline] __list_lru_init+0x193/0x2a0 mm/list_lru.c:626 alloc_super+0x2e0/0x310 fs/super.c:269 sget_userns+0x94/0x2a0 fs/super.c:609 sget+0x8d/0xb0 fs/super.c:660 mount_nodev+0x31/0xb0 fs/super.c:1387 fuse_mount+0x2d/0x40 fs/fuse/inode.c:1236 legacy_get_tree+0x27/0x80 fs/fs_context.c:661 vfs_get_tree+0x2e/0x120 fs/super.c:1476 do_new_mount fs/namespace.c:2790 [inline] do_mount+0x932/0xc50 fs/namespace.c:3110 ksys_mount+0xab/0x120 fs/namespace.c:3319 __do_sys_mount fs/namespace.c:3333 [inline] __se_sys_mount fs/namespace.c:3330 [inline] __x64_sys_mount+0x26/0x30 fs/namespace.c:3330 do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is a simple off by one bug on the error path. Link: http://lkml.kernel.org/r/20190528043202.99980-1-shakeelb@google.com Fixes: 60d3fd32 ("list_lru: introduce per-memcg lists") Reported-by: syzbot+f90a420dfe2b1b03cb2c@syzkaller.appspotmail.com Signed-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by:
-
Eric Biggers authored
commit 355e8d26 upstream. Opening and closing an io_uring instance leaks a UNIX domain socket inode. This is because the ->file of the io_uring instance's internal UNIX domain socket is set to point to the io_uring file, but then sock_release() sees the non-NULL ->file and assumes the inode reference is held by the file so doesn't call iput(). That's not the case here, since the reference is still meant to be held by the socket; the actual inode of the io_uring file is different. Fix this leak by NULL-ing out ->file before releasing the socket. Reported-by: syzbot+111cb28d9f583693aefa@syzkaller.appspotmail.com Fixes: 2b188cc1 ("Add io_uring IO interface") Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Hans de Goede authored
commit 31f6264e upstream. We've received a bugreport that using LPM with ST1000LM024 drives leads to system lockups. So it seems that these models are buggy in more then 1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330 Cc: stable@vger.kernel.org Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Gen Zhang authored
commit fec63753 upstream. In selinux_sb_eat_lsm_opts(), 'arg' is allocated by kmemdup_nul(). It returns NULL when fails. So 'arg' should be checked. And 'mnt_opts' should be freed when error. Signed-off-by:
Gen Zhang <blackgod016574@gmail.com> Fixes: 99dbbb59 ("selinux: rewrite selinux_sb_eat_lsm_opts()") Cc: <stable@vger.kernel.org> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Gen Zhang authored
commit e2e0e097 upstream. In selinux_add_mnt_opt(), 'val' is allocated by kmemdup_nul(). It returns NULL when fails. So 'val' should be checked. And 'mnt_opts' should be freed when error. Signed-off-by:
-
Ondrej Mosnacek authored
commit aff7ed48 upstream. These strings may come from untrusted sources (e.g. file xattrs) so they need to be properly escaped. Reproducer: # setenforce 0 # touch /tmp/test # setfattr -n security.selinux -v 'kuřecí řízek' /tmp/test # runcon system_u:system_r:sshd_t:s0 cat /tmp/test (look at the generated AVCs) Actual result: type=AVC [...] trawcon=kuřecí řízek Expected result: type=AVC [...] trawcon=6B75C5996563C3AD20C599C3AD7A656B Fixes: fede1483 ("selinux: log invalid contexts in AVCs") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Acked-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Takashi Sakamoto authored
commit 0e3fb699 upstream. The data for isochronous resources is not destroyed in expected place. This commit fixes the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 9b2bb4f2 ("ALSA: firewire-motu: add stream management functionality") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit 717f43d8 upstream. ALC255 and ALC256 were some difference for hidden register. This update was suitable for ALC256. Fixes: e69e7e03 ("ALSA: hda/realtek - ALC256 speaker noise issue") Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Rui Nuno Capela authored
commit 352bcae9 upstream. Check for exact and correct return value to snd_i2c_sendbytes call for EWS/DMX 6Fire (snd_ice1712). Fixes a systemic error on every boot starting from kernel 5.1 onwards to snd_ice1712 driver ("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards. Check for exact and correct return value to snd_i2c_sendbytes call for EWS/DMX 6Fire (snd_ice1712). Fixes a systemic error on every boot to snd_ice1712 driver ("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards. Fixes: c99776cc ("ALSA: ice1712: fix a missing check of snd_i2c_sendbytes") Signed-off-by:
Rui Nuno Capela <rncbc@rncbc.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Sakamoto authored
commit d8fa87c3 upstream. Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear Audio data channels, therefore it allows software to capture PCM substream. However, ALSA oxfw driver doesn't. This commit changes the driver to add one PCM substream for capture direction. Fixes: de5126cc ("ALSA: oxfw: add stream format quirk for SCS.1 models") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
-
Hui Wang authored
commit 17d30460 upstream. This reverts commit 9cb40eb1. This patch introduces noise and headphone playback issue after rebooting or suspending/resuming. Let us revert it. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203831 Fixes: 9cb40eb1 ("ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops") Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Jason Gerecke authored
commit 69dbdfff upstream. The Bluetooth interface of the 2nd-gen Intuos Pro batches together four independent "frames" of finger data into a single report. Each frame is essentially equivalent to a single USB report, with the up-to-10 fingers worth of information being spread across two frames. At the moment the driver only calls `input_sync` after processing all four frames have been processed, which can result in the driver sending multiple updates for a single slot within the same SYN_REPORT. This can confuse userspace, so modify the driver to sync more often if necessary (i.e., after reporting the state of all fingers). Fixes: 4922cd26 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Jason Gerecke authored
commit 6441fc78 upstream. The button numbering of the 2nd-gen Intuos Pro is not consistent between the USB and Bluetooth interfaces. Over USB, the HID_GENERIC codepath enumerates the eight ExpressKeys first (BTN_0 - BTN_7) followed by the center modeswitch button (BTN_8). The Bluetooth codepath, however, has the center modeswitch button as BTN_0 and the the eight ExpressKeys as BTN_1 - BTN_8. To ensure userspace button mappings do not change depending on how the tablet is connected, modify the Bluetooth codepath to report buttons in the same order as USB. To ensure the mode switch LED continues to toggle in response to the mode switch button, the `wacom_is_led_toggled` function also requires a small update. Link: https://github.com/linuxwacom/input-wacom/pull/79 Fixes: 4922cd26 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by:
Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by:
-
Jason Gerecke authored
commit fe7f8d73 upstream. The Bluetooth reports from the 2nd-gen Intuos Pro have separate bits for indicating if the tip or eraser is in contact with the tablet. At the moment, only the tip contact bit controls the state of the BTN_TOUCH event. This prevents the eraser from working as expected. This commit changes the driver to send BTN_TOUCH whenever either the tip or eraser contact bit is set. Fixes: 4922cd26 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by:
-
Jason Gerecke authored
commit e92a7be7 upstream. If the tool spends some time in prox before entering range, a series of events (e.g. ABS_DISTANCE, MSC_SERIAL) can be sent before we or userspace have any clue about the pen whose data is being reported. We need to hold off on reporting anything until the pen has entered range. Since we still want to report events that occur "in prox" after the pen has *left* range we use 'wacom-tool[0]' as the indicator that the pen did at one point enter range and provide us/userspace with tool type and serial number information. Fixes: a48324de ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by:
-
Jason Gerecke authored
commit 2cc08800 upstream. The serial number and tool type information that is reported by the tablet while a pen is merely "in prox" instead of fully "in range" can be stale and cause us to report incorrect tool information. Serial number, tool type, and other information is only valid once the pen comes fully in range so we should be careful to not use this information until that point. In particular, this issue may cause the driver to incorectly report BTN_TOOL_RUBBER after switching from the eraser tool back to the pen. Fixes: a48324de ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: <stable@vger.kernel.org> # 4.11+ Signed-off-by:
-
Benjamin Tissoires authored
commit 81bcbad5 upstream. Since kernel v5.0, one single win8 touchscreen device failed. And it turns out this is because it reports 2 InRange usage per touch. It's a first, and I *really* wonder how this was allowed by Microsoft in the first place. But IIRC, Breno told me this happened *after* a firmware upgrade... Anyway, better be safe for those crappy devices, and make sure we have a full slot before jumping to the next. This won't prevent all crappy devices to fail here, but at least we will have a safeguard as long as the contact ID and the X and Y coordinates are placed in the report after the grabage. Fixes: 01eaac7e ("HID: multitouch: remove one copy of values") CC: stable@vger.kernel.org # v5.0+ Reported-and-tested-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Benjamin Tissoires authored
commit 15fc1b5c upstream. This reverts commit 94a9992f. The commit allows for more than 32 bits in hid_field_extract(), but the return value is a 32 bits int. So basically what this commit is doing is just silencing those legitimate errors. Revert to a previous situation in the hope that a proper fix will be impletemented. Fixes: 94a9992f ("HID: Increase maximum report size allowed by hid_field_extract()") Cc: stable@vger.kernel.org # v5.1 Acked-by:
-
Benjamin Tissoires authored
commit 39b3c3a5 upstream. The value field is actually an array of .maxfield. We should assign the correct number to the correct usage. Not that we never encounter a device that requires this ATM, but better have the proper code path. Fixes: 2dc702c9 ("HID: input: use the Resolution Multiplier for high-resolution scrolling") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by:
-
Benjamin Tissoires authored
commit d43c17ea upstream. Some old mice have a tendency to not accept the high resolution multiplier. They reply with a -EPIPE which was previously ignored. Force the call to resolution multiplier to be synchronous and actually check for the answer. If this fails, consider the mouse like a normal one. Fixes: 2dc702c9 ("HID: input: use the Resolution Multiplier for high-resolution scrolling") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1700071Reported-and-tested-by:
James Feeney <james@nurealm.net> Cc: stable@vger.kernel.org # v5.0+ Signed-off-by:
-
Thomas Backlund authored
Not-entirely-upstream-sha1-but-equivalent: bed2dd84 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()") Setting CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n (added by commit: b30a43ac) causes the build to fail with: ERROR: "drm_legacy_mmap" [drivers/gpu/drm/nouveau/nouveau.ko] undefined! This does not happend upstream as the offending code got removed in: bed2dd84 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()") Fix that by adding check for CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT around the drm_legacy_mmap() call. Also, as Sven Joachim pointed out, we need to make the check in CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n case return -EINVAL as its done for basically all other gpu drivers, especially in upstream kernels drivers/gpu/drm/ttm/ttm_bo_vm.c as of the upstream commit bed2dd84. NOTE. This is a minimal stable-only fix for trees where b30a43ac is backported as the build error affects nouveau only. Fixes: b30a43ac ("drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)") Signed-off-by:
Thomas Backlund <tmb@mageia.org> Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sven Joachim <svenjoac@gmx.de> Signed-off-by:
-
Dave Airlie authored
commit b30a43ac upstream. There was a nouveau DDX that relied on legacy context ioctls to work, but we fixed it years ago, give distros that have a modern DDX the option to break the uAPI and close the mess of holes that legacy context support is. Full context of the story: commit 0e975980 Author: Peter Antoine <peter.antoine@intel.com> Date: Tue Jun 23 08:18:49 2015 +0100 drm: Turn off Legacy Context Functions The context functions are not used by the i915 driver and should not be used by modeset drivers. These driver functions contain several bugs and security holes. This change makes these functions optional can be turned on by a setting, they are turned off by default for modeset driver with the exception of the nouvea driver that may require them with an old version of libdrm. The previous attempt was commit 7c510133 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Aug 8 15:41:21 2013 +0200 drm: mark context support as a legacy subsystem but this had to be reverted commit c21eb21c Author: Dave Airlie <airlied@redhat.com> Date: Fri Sep 20 08:32:59 2013 +1000 Revert "drm: mark context support as a legacy subsystem" v2: remove returns from void function, and formatting (Daniel Vetter) v3: - s/Nova/nouveau/ in the commit message, and add references to the previous attempts - drop the part touching the drm hw lock, that should be a separate patch. Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2) Cc: Peter Antoine <peter.antoine@intel.com> (v2) Reviewed-by:
Peter Antoine <peter.antoine@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> v2: move DRM_VM dependency into legacy config. v3: fix missing dep (kbuild robot) Cc: stable@vger.kernel.org Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
- 17 Jun, 2019 5 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit 967c05ae upstream. If mtu probing is enabled tcp_mtu_probing() could very well end up with a too small MSS. Use the new sysctl tcp_min_snd_mss to make sure MSS search is performed in an acceptable range. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Jonathan Looney <jtl@netflix.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
commit 5f3e2bf0 upstream. Some TCP peers announce a very small MSS option in their SYN and/or SYN/ACK messages. This forces the stack to send packets with a very high network/cpu overhead. Linux has enforced a minimal value of 48. Since this value includes the size of TCP options, and that the options can consume up to 40 bytes, this means that each segment can include only 8 bytes of payload. In some cases, it can be useful to increase the minimal value to a saner value. We still let the default to 48 (TCP_MIN_SND_MSS), for compatibility reasons. Note that TCP_MAXSEG socket option enforces a minimal value of (TCP_MIN_MSS). David Miller increased this minimal value in commit c39508d6 ("tcp: Make TCP_MAXSEG minimum more correct.") from 64 to 88. We might in the future merge TCP_MIN_SND_MSS and TCP_MIN_MSS. CVE-2019-11479 -- tcp mss hardcoded to 48 Signed-off-by:
Jonathan Looney <jtl@netflix.com> Acked-by:
-
Eric Dumazet authored
commit f070ef2a upstream. Jonathan Looney reported that a malicious peer can force a sender to fragment its retransmit queue into tiny skbs, inflating memory usage and/or overflow 32bit counters. TCP allows an application to queue up to sk_sndbuf bytes, so we need to give some allowance for non malicious splitting of retransmit queue. A new SNMP counter is added to monitor how many times TCP did not allow to split an skb if the allowance was exceeded. Note that this counter might increase in the case applications use SO_SNDBUF socket option to lower sk_sndbuf. CVE-2019-11478 : tcp_fragment, prevent fragmenting a packet when the socket is already using more than half the allowed space Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Tyler Hicks <tyhicks@canonical.com> Cc: Bruce Curtis <brucec@netflix.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit 3b4929f6 upstream. Jonathan Looney reported that TCP can trigger the following crash in tcp_shifted_skb() : BUG_ON(tcp_skb_pcount(skb) < pcount); This can happen if the remote peer has advertized the smallest MSS that linux TCP accepts : 48 An skb can hold 17 fragments, and each fragment can hold 32KB on x86, or 64KB on PowerPC. This means that the 16bit witdh of TCP_SKB_CB(skb)->tcp_gso_segs can overflow. Note that tcp_sendmsg() builds skbs with less than 64KB of payload, so this problem needs SACK to be enabled. SACK blocks allow TCP to coalesce multiple skbs in the retransmit queue, thus filling the 17 fragments to maximal capacity. CVE-2019-11477 -- u16 overflow of TCP_SKB_CB(skb)->tcp_gso_segs Fixes: 832d11c5 ("tcp: Try to restore large SKBs while SACK processing") Signed-off-by:
-
- 15 Jun, 2019 10 commits
-
-
Greg Kroah-Hartman authored
-
Jens Axboe authored
commit 44a9bd18 upstream. The test case we have is rightfully failing with the current kernel: io_uring_setup(1, 0x7ffe2cafebe0), flags: IORING_SETUP_SQPOLL|IORING_SETUP_SQ_AFF, resv: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000, sq_thread_cpu: 4 expected -1, got 3 This is in a vm, and CPU3 is the last valid one, hence asking for 4 should fail the setup with -EINVAL, not succeed. The problem is that we're using array_index_nospec() with nr_cpu_ids as the index, hence we wrap and end up using CPU0 instead of CPU4. This makes the setup succeed where it should be failing. We don't need to use array_index_nospec() as we're not indexing any array with this. Instead just compare with nr_cpu_ids directly. This is fine as we're checking with cpu_online() afterwards. Signed-off-by:
-
Takashi Iwai authored
commit 7c32ae35 upstream. The call of unsubscribe_port() which manages the group count and module refcount from delete_and_unsubscribe_port() looks racy; it's not covered by the group list lock, and it's likely a cause of the reported unbalance at port deletion. Let's move the call inside the group list_mutex to plug the hole. Reported-by: syzbot+e4c8abb920efa77bace9@syzkaller.appspotmail.com Signed-off-by:
-
Amir Goldstein authored
commit 9e46b840 upstream. Overlay file f_pos is the master copy that is preserved through copy up and modified on read/write, but only real fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose limitations that are more strict than ->s_maxbytes for specific files, so we use the real file to perform seeks. We do not call real fs for SEEK_CUR:0 query and for SEEK_SET:0 requests. Fixes: d1d04ef8 ("ovl: stack file ops") Reported-by:
Eddie Horng <eddiehorng.tw@gmail.com> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Jiufei Xue authored
commit 98487de3 upstream. We found that it return success when we set IMMUTABLE_FL flag to a file in docker even though the docker didn't have the capability CAP_LINUX_IMMUTABLE. The commit d1d04ef8 ("ovl: stack file ops") and dab5ca8f ("ovl: add lsattr/chattr support") implemented chattr operations on a regular overlay file. ovl_real_ioctl() overridden the current process's subjective credentials with ofs->creator_cred which have the capability CAP_LINUX_IMMUTABLE so that it will return success in vfs_ioctl()->cap_capable(). Fix this by checking the capability before cred overridden. And here we only care about APPEND_FL and IMMUTABLE_FL, so get these information from inode. [SzM: move check and call to underlying fs inside inode locked region to prevent two such calls from racing with each other] Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 1e07d637 which is commit b30a43ac upstream. Sven reports: Commit 1e07d637 ("drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)") has caused a build failure for me when I actually tried that option (CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n): ,---- | Kernel: arch/x86/boot/bzImage is ready (#1) | Building modules, stage 2. | MODPOST 290 modules | ERROR: "drm_legacy_mmap" [drivers/gpu/drm/nouveau/nouveau.ko] undefined! | scripts/Makefile.modpost:91: recipe for target '__modpost' failed `---- Upstream does not have that problem, as commit bed2dd84 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()") has removed the use of drm_legacy_mmap from nouveau_ttm.c. Unfortunately that commit does not apply in 5.1.9. The ensuing discussion proposed a number of one-off patches, but no solid agreement was made, so just revert the commit for now to get people's systems building again. Reported-by:
Sven Joachim <svenjoac@gmx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 07e38998 which is commit d5bb334a upstream. Lots of people have reported issues with this patch, and as there does not seem to be a fix going into Linus's kernel tree any time soon, revert the commit in the stable trees so as to get people's machines working properly again. Reported-by:
Vasily Khoruzhick <anarsoul@gmail.com> Reported-by:
-
Dennis Zhou authored
[ Upstream commit 8c43004a ] pcpu_find_block_fit() guarantees that a fit is found within PCPU_BITMAP_BLOCK_BITS. Iteration is used to determine the first fit as it compares against the block's contig_hint. This can lead to incorrectly scanning past the end of the bitmap. The behavior was okay given the check after for bit_off >= end and the correctness of the hints from pcpu_find_block_fit(). This patch fixes this by bounding the end offset by the number of bits in a chunk. Signed-off-by:
Dennis Zhou <dennis@kernel.org> Reviewed-by:
Peng Fan <peng.fan@nxp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andrey Smirnov authored
[ Upstream commit 338aa107 ] Fix the warning produced by gpiochip_set_irq_hooks() by allocating a dedicated IRQ chip per GPIO chip/port. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit d5aa8408 ] Porter needs the regulator quirk, just like the other boards. But unlike the other boards, the Porter uses DA9063L, which is at 0x5a. Otherwise, DA9063L and DA9210 IRQ line is still connected to CPU IRQ2 . Signed-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
