- 17 Jan, 2015 34 commits
-
-
Christophe Ricard authored
Cleanup header description and correct some indent. Reviewed-by:
Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com> Signed-off-by:
Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Christophe Ricard authored
Remove some useless spaces (new line or space) Reviewed-by:
-
Christophe Ricard authored
Add a return value check when reading data from the FIFO register. Cc: <stable@vger.kernel.org> Reviewed-by:
-
Jarkko Sakkinen authored
Detect TPM 2.0 by sending idempotent TPM 2.x command. Ordinals for TPM 2.0 are higher than TPM 1.x commands so this should be fail-safe. Using STS3 is unreliable because some chips just report 0xff and not what the spec says. Before TPM family is detected, timeouts are set to the maximum values for both TPM 1.x and TPM 2.x. In addition to this, suspend/resume functionality is implemented for TPM 2.x. Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Will Arthur <will.c.arthur@intel.com> Reviewed-by:
Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by:
-
Jarkko Sakkinen authored
tpm_crb is a driver for TPM 2.0 Command Response Buffer (CRB) Interface as defined in PC Client Platform TPM Profile (PTP) Specification. Only polling and single locality is supported as these are the limitations of the available hardware, Platform Trust Techonlogy (PTT) in Haswell CPUs. The driver always applies CRB with ACPI start because PTT reports using only ACPI start as start method but as a result of my testing it requires also CRB start. Signed-off-by:
-
Jarkko Sakkinen authored
TPM 2.0 devices are separated by adding a field 'flags' to struct tpm_chip and defining a flag TPM_CHIP_FLAG_TPM2 for tagging them. This patch adds the following internal functions: - tpm2_get_random() - tpm2_get_tpm_pt() - tpm2_pcr_extend() - tpm2_pcr_read() - tpm2_startup() Additionally, the following exported functions are implemented for implementing TPM 2.0 device drivers: - tpm2_do_selftest() - tpm2_calc_ordinal_durations() - tpm2_gen_interrupt() The existing functions that are exported for the use for existing subsystems have been changed to check the flags field in struct tpm_chip and use appropriate TPM 2.0 counterpart if TPM_CHIP_FLAG_TPM2 is est. The code for tpm2_calc_ordinal_duration() and tpm2_startup() were originally written by Will Arthur. Signed-off-by:
-
Jarkko Sakkinen authored
Added own device class for TPM. Uses MISC_MAJOR:TPM_MINOR for the first character device in order to retain backwards compatibility. Added tpm_dev_release() back attached to the character device. I've been running this code now for a while on my laptop (Lenovo T430S) TrouSerS works perfectly without modifications. I don't believe it breaks anything significantly. The sysfs attributes that have been placed under the wrong place and are against sysfs-rules.txt should be probably left to stagnate under platform device directory and start defining new sysfs attributes to the char device directory. Guidelines for future TPM sysfs attributes should be probably along the lines of - Single flat set of mandatory sysfs attributes. For example, current PPI interface is way way too rich when you only want to use it to clear and activate the TPM. - Define sysfs attribute if and only if there's no way to get the value from ring-3. No attributes for TPM properties. It's just unnecessary maintenance hurdle that we don't want. Signed-off-by:
Scot Doyle <lkml14@scotdoyle.com> Tested-by:
-
Jarkko Sakkinen authored
Rename chip->dev to chip->pdev to make it explicit that this not the character device but actually represents the platform device. Signed-off-by:
-
Jarkko Sakkinen authored
Traversal of the ACPI device tree was not done right. PPI interface should be looked up only from the ACPI device that is the platform device for the TPM. This could cause problems with systems with two TPM chips such as 4th gen Intel systems. In addition, added the missing license and copyright platter to the tpm_ppi.c. Signed-off-by:
-
Jarkko Sakkinen authored
tpm_register_hardware() and tpm_remove_hardware() are called often before initializing the device. The problem is that the device might not be fully initialized when it comes visible to the user space. This patch resolves the issue by diving initialization into two parts: - tpmm_chip_alloc() creates struct tpm_chip. - tpm_chip_register() sets up the character device and sysfs attributes. The framework takes care of freeing struct tpm_chip by using the devres API. The broken release callback has been wiped. ACPI drivers do not ever get this callback. Regards to Jason Gunthorpe for carefully reviewing this part of the code. Signed-off-by:
-
Jarkko Sakkinen authored
Merged transmit_cmd() functions in tpm-interface.c and tpm-sysfs.c. Added "tpm_" prefix for consistency sake. Changed cmd parameter as opaque. This enables to use separate command structures for TPM1 and TPM2 commands in future. Loose coupling works fine here. Signed-off-by:
-
Ashley Lai authored
Added myself as a maintainer for the IBM vtpm driver and removed myself from the tpm maintainer list. Also, updated the tpm_ibmvtpm driver with my current email address. Signed-off-by:
Ashley Lai <ashleydlai@gmail.com> Signed-off-by:
-
Christophe Ricard authored
If !client the kernel mays oops in dev_info when doing client->dev. Reported-by:
-
Christophe Ricard authored
Many changes were added to the driver so increment the version. Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Christophe Ricard authored
Remove useless i2c read on TPM_INT_ENABLE and TPM_INT_STATUS Reviewed-by:
-
Christophe Ricard authored
Improve the irq management by using a new function wait_for_stat. Instead of using a completion struct, we rely on the waitqueue read_queue and int_queue from chip->vendor field. Reviewed-by:
-
Christophe Ricard authored
Cleanup code indentation, braces, test variable when NULL. Reviewed-by:
-
Christophe Ricard authored
st33zp24 tpm can be seen as a trivial i2c device as other i2c tpm. However several other properties needs to be documented such as lpcpd. Reviewed-by:
-
Christophe Ricard authored
Add tpm_stm_st33_i2c dts structure keeping backward compatibility with static platform_data support as well. In the mean time to easy this update and to make it much simpler, we: - Moved all gpio_request to devm_gpio_request_one primitive - Moved request_irq to devm_request_irq Reviewed-by:
-
Christophe Ricard authored
For sanity, replace every tpm_st33_* with tpm_stm_* Reviewed-by:
-
Christophe Ricard authored
Some functions return err, rc or ret for a status code. Return ret instead for all of them. Reviewed-by:
-
Christophe Ricard authored
The serirq gpio pin is used only as interrupt. After driver initialization, the serirq signal is always used through interrupt and never with gpio kernel API. The irq can then be initialized during the platform_data definition within the client->irq pin. Reviewed-by:
-
Christophe Ricard authored
In order to clean big buffers in st33zp24_platform_data structure, replace with tpm_stm_dev for driver internal usage. As only one buffer is really necessary replace with buf field. In the mean time move tpm_i2c_stm_st33.h to include/linux/platform_data. Reviewed-by:
-
Christophe Ricard authored
Move tpm registers to tpm_i2c_stm_st33.c. Reviewed-by:
-
Christophe Ricard authored
Fix: - WARNING: Missing a blank line after declarations - WARNING: braces {} are not necessary for any arm of this statement Reviewed-by: -
Christophe Ricard authored
The Free Software Foundation may have mail address change. In order to be sure to have up to date mail address give an url to the license which includes accurate informations. Reviewed-by:
-
Christophe Ricard authored
STMicroelectronics i2c tpm is the only one to have a different tristate label. Rename it "TPM Interface Specification 1.2 Interface (I2C - STMicroelectronics)" Reviewed-by:
-
Christophe Ricard authored
When sending data in tpm_stm_i2c_send, each loop iteration send buf. Send buf + i instead as the goal of this for loop is to send a number of byte from buf that fit in burstcnt. Once those byte are sent, we are supposed to send the next ones. The driver was working because the burstcount value returns always the maximum size for a TPM command or response. (0x800 for a command and 0x400 for a response). Cc: stable@vger.kernel.org Reviewed-by:
-
Markus Elfring authored
The tpm_dev_vendor_release() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Fabian Frederick authored
sizeof(u8) is always 1. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Hon Ching (Vicky) Lo authored
There was an oops in tpm_ibmvtpm_get_desired_dma, which caused kernel panic during boot when vTPM is enabled in Power partition configured in AMS mode. vio_bus_probe calls vio_cmo_bus_probe which calls tpm_ibmvtpm_get_desired_dma to get the size needed for DMA allocation. The problem is, vio_cmo_bus_probe is called before calling probe, which for vtpm is tpm_ibmvtpm_probe and it's this function that initializes and sets up vtpm's CRQ and gets required data values. Therefore, since this has not yet been done, NULL is returned in attempt to get the size for DMA allocation. We added a NULL check. In addition, a default buffer size will be set when NULL is returned. Cc: <stable@vger.kernel.org> Signed-off-by:
Hon Ching (Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by:
-
Scot Doyle authored
Some machines, such as the Acer C720 and Toshiba CB35, have TPMs that do not send IRQs while also having an ACPI TPM entry indicating that they will be sent. These machines freeze on resume while the tpm_tis module waits for an IRQ, eventually timing out. When in interrupt mode, the tpm_tis module should receive an IRQ during module init. Fall back to polling mode if none is received when expected. Cc: <stable@vger.kernel.org> Signed-off-by:
Michael Mullin <masmullin@gmail.com> Reviewed-by:
-
Kiran Padwal authored
Currently these driver are missing a check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. This patch adds a missing check for tpm_i2c_atmel.c and tpm_i2c_nuvoton.c Cc: stable@vger.kernel.org Signed-off-by:
Kiran Padwal <kiran.padwal@smartplayin.com> Reviewed-By:
-
David Howells authored
Add newly registered TPMs to the tail of the list, not the beginning, so that things that are specifying TPM_ANY_NUM don't find that the device they're using has inadvertently changed. Adding a second device would break IMA, for instance. Cc: stable@vger.kernel.org Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
-
- 15 Jan, 2015 1 commit
-
-
James Morris authored
Merge tag 'keys-next-fixes-20150114' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next
-
- 14 Jan, 2015 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't use uninitialized data in IPVS, from Dan Carpenter. 2) conntrack race fixes from Pablo Neira Ayuso. 3) Fix TX hangs with i40e, from Jesse Brandeburg. 4) Fix budget return from poll calls in dnet and alx, from Eric Dumazet. 5) Fix bugus "if (unlikely(x) < 0)" test in AF_PACKET, from Christoph Jaeger. 6) Fix bug introduced by conversion to list_head in TIPC retransmit code, from Jon Paul Maloy. 7) Don't use GFP_NOIO under spinlock in USB kaweth driver, from Alexey Khoroshilov. 8) Fix bridge build with INET disabled, from Arnd Bergmann. 9) Fix netlink array overrun for PROBE attributes in openvswitch, from Thomas Graf. 10) Don't hold spinlock across synchronize_irq() in tg3 driver, from Prashant Sreedharan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) tg3: Release tp->lock before invoking synchronize_irq() tg3: tg3_reset_task() needs to use rtnl_lock to synchronize tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin openvswitch: packet messages need their own probe attribtue i40e: adds FCoE configure option cxgb4vf: Fix queue allocation for 40G adapter netdevice: Add missing parentheses in macro bridge: only provide proxy ARP when CONFIG_INET is enabled neighbour: fix base_reachable_time(_ms) not effective immediatly when changed net: fec: fix MDIO bus assignement for dual fec SoC's xen-netfront: use different locks for Rx and Tx stats drivers: net: cpsw: fix multicast flush in dual emac mode cxgb4vf: Initialize mdio_addr before using it net: Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb() MAINTAINERS: add me as ibmveth maintainer tipc: fix bug in broadcast retransmit code update ip-sysctl.txt documentation (v2) net/at91_ether: prepare and unprepare clock ... -
David S. Miller authored
Prashant Sreedharan says: ==================== tg3: synchronize_irq() should be called without taking locks v2: Added Reported-by, Tested-by fields and reference to the thread that reported the problem This series addresses the problem reported by Peter Hurley in mail thread https://lkml.org/lkml/2015/1/12/1082 ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Prashant Sreedharan authored
synchronize_irq() can sleep waiting, for pending IRQ handlers so driver should release the tp->lock spin lock before invoking synchronize_irq() Reported-by:
Peter Hurley <peter@hurleysoftware.com> Tested-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Prashant Sreedharan authored
Currently tg3_reset_task() uses only tp->lock for synchronizing with code paths like tg3_open() etc. But since tp->lock is released before doing synchronize_irq(), rtnl_lock should be taken in tg3_reset_task() to synchronize it with other code paths. Reported-by:
-
Prashant Sreedharan authored
This is to avoid the race between tg3_timer() and the execution paths which does not invoke tg3_timer_stop() and releases tp->lock before calling synchronize_irq() Reported-by:
-
