The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5102_probe.

Fixes:93e8791d ("ASoC: wm5102: Initial driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-4-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5110_probe.

Fixes:5c6af635 ("ASoC: wm5110: Add audio CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-3-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm8997_probe

Fixes:40843aea ("ASoC: wm8997: Initial CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-2-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

There are some spelling mistakes in dev_err messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220928220417.66799-1-colin.i.king@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Audio tuner is used to handle clock drift between 26M and APLL domain.

It's expected when abs(chg_cnt) equals to upper bound, tuner updates pcw
setting automatically, and then abs(chg_cnt) decreases.
In the stress test, we found abs(chg_cnt) possibly equals to 2 at the
unexpected timing. This results in wrong pcw updating.
Finally, abs(chg_cnt) will always be larger than upper bound,

As a result, we update the upper bound to 3 to handle the corner case.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220927151141.11846-1-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Zhang Qilong <zhangqilong3@huawei.com>:

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced. We fix it by moving pm_runtime_enable to the
endding of probe.

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of stm32_i2s_probe.

Fixes:32a956a1 ("ASoC: stm32: i2s: add pm_runtime support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220927142640.64647-1-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of stm32_spdifrx_probe.

Fixes:ac5e3efd ("ASoC: stm32: spdifrx: add pm_runtime support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220927142601.64266-3-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of stm32_adfsdm_probe.

Fixes:98e500a1 ("ASoC: stm32: dfsdm: add pm_runtime support for audio")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220927142601.64266-2-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

After tip sense detects a jack insertion, if automatic
type detection, and manual type detection fails, then
fall back to assume the jack connected belongs to
headphones.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220927121440.2506632-1-sbinding@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

On removal of the driver, the ASoC component should be unregistered
first, before we start releasing any of the other resources.

Fixes: 3df5d0d9 ("ASoC: apple: mca: Start new platform driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220927113426.49724-3-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The commit 4ec8179c ("ASoC: apple: mca: Postpone requesting of DMA
channels") shuffled around with the requesting and releasing of DMA
channels. It left behind stale release calls from within
apple_mca_release, remove those now.

Fixes: 4ec8179c ("ASoC: apple: mca: Postpone requesting of DMA channels")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220927113426.49724-2-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Replace the deassertion of the peripheral's shared reset with the
triggering of a pulse on it. This is what we should have been using all
along as the platform's custom is not leaving the reset asserted on
unused peripherals.

Fixes: 3df5d0d9 ("ASoC: apple: mca: Start new platform driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220927113426.49724-1-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.

This helper allows for flexible-array members in unions.

Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/226
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.htmlSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/YzIuiUul2CwPlkKh@workSigned-off-by: Mark Brown <broonie@kernel.org>

It is expected that the SAI subnodes would contain audio OF graph port
with endpoint to link it with the other side of audio link. Document
the port: property.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220927002004.685108-1-marex@denx.deSigned-off-by: Mark Brown <broonie@kernel.org>

Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.

This helper allows for flexible-array members in unions.

Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/211
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.htmlSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/YzIcZ11k8RiQtS2T@workSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Chunxu Li <chunxu.li@mediatek.com>:

Support more operations for MediaTek DSPs using SOF.

Extend the Qualcomm Audio maintainer entry to include sound related
bindings and the Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
IPC driver, which is tightly related to the Audio DSP.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220923203140.514730-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

If CONFIG_REGMAP_SLIMBUS is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-,
will be failed, like this:

sound/soc/codecs/wcd934x.o: In function `wcd934x_codec_probe':
wcd934x.c:(.text+0x3310): undefined reference to `__regmap_init_slimbus'
make: *** [vmlinux] Error 1

Add select REGMAP_SLIMBUS to config SND_SOC_WCD934X.

Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926074042.13297-1-renzhijie2@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add pcm_pointer callback for mt8195 to support read
host position from DSP
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220924033559.26599-3-chunxu.li@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add pcm_hw_params callback for mt8195 to support continue
update dma host position
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220924033559.26599-2-chunxu.li@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

On Intel platforms the registers for DSP communications are used differently,
the IPC dump information is not correct since important registers are not
printed and existing ones are used a bit differently for IPC4.

As a last step, enable the IPC timeout 'handling' and allow the printout of
the now usefull IPC dump.

Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

This patchset adds support for SM8450 and SC8280XP SoC and also some of
the fixes requried to get stable audio on X13s.

Tested SmartSpeakers and Headset on SM8450 MTP and
Lenovo Thinkpad X13s.

This patch converts the driver to newer gpiod API, so that we can stop
exporting OF-specific legacy gpio API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220920025804.1788667-2-dmitry.torokhov@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

There are currently no users of this driver's platform data in the
mainline kernel, so let's drop it.

Newer devices should use DT, ACPI, or static software properties to
describe the hardware.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220920025804.1788667-1-dmitry.torokhov@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove unnecessary dev_set_drvdata() in skl_remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220916140757.681414-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

If clk_hw_register() fails, the corresponding clk should not be
unregistered.

To handle errors from loops, clean up partial iterations before doing the
goto.  So add a clk_hw_unregister().
Then use a while (--i >= 0) loop in the unwind section.

Fixes: 78013a1c ("ASoC: da7219: Fix clock handling around codec level probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/e4acceab57a0d9e477a8d5890a45c5309e553e7c.1663875789.git.christophe.jaillet@wanadoo.frSigned-off-by: Mark Brown <broonie@kernel.org>

The driver uses two statically ininitialized struct dma_slave_config,
but only one of them is initialized to zero. Initialize config_be to
zero as well to make sure that no fields are filled with random values.
Let the compiler do this instead of explicitly calling memset() which
makes it easier to read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663928147-10106-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using the newest pm_runtime_resume_and_get is more appropriate
for simplifing code here.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220922145846.114312-1-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:

This series includes fixes for suspend/resume and module
loading/unloading for the MTL platform.

Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>:

This series allows the headphone and headset mic jack status to be
handled separately by userspace on MT8192, MT8195 and MT8186.

Changes based on commit d0508b4f ("ASoC: rk3399_gru_sound: Add DAPM
pins, kcontrols for jack detection"). Found while searching for an
alternative for JackSwitch [1].

[1] https://lore.kernel.org/all/b98a8a77-7652-1995-27ba-eb7b6d30202a@gmail.com/

Nícolas F. R. A. Prado (6):
  ASoC: mediatek: mt8192-mt6359: Expose individual headset jack pins
  ASoC: mediatek: mt8195: Expose individual headset jack pins
  ASoC: mediatek: mt8186-da7219: Add headset widgets with switches
  ASoC: mediatek: mt8186-da7219: Expose individual headset jack pins
  ASoC: mediatek: mt8186-rt5682: Add headset widgets with switches
  ASoC: mediatek: mt8186-rt5682: Expose individual headset jack pins

 .../mt8186/mt8186-mt6366-da7219-max98357.c    | 25 +++++++++++++++++--
 .../mt8186/mt8186-mt6366-rt1019-rt5682s.c     | 25 +++++++++++++++++--
 .../mt8192/mt8192-mt6359-rt1015-rt5682.c      | 17 +++++++++++--
 sound/soc/mediatek/mt8195/mt8195-mt6359.c     | 17 +++++++++++--
 4 files changed, 76 insertions(+), 8 deletions(-)

--
2.37.3

It can help debugging IPC timeout issues (like we do with IPC3) if we
dump the IPC and DSP information.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-7-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The firmware register dump is IPC3 specific, it is not available for other
IPC versions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.

The existing code was printing registers relevant for IPC3, which is not
even supported on MTL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

LPASS VA Macro now has soundwire master to deal with access to
analog mic in low power island use cases.

This is added after sc8280xp, add support for this.
Along with this also add compatibles for sm8450 and sc8280xp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-13-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Clear the frame sync counter before enabling it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-12-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add compatible for sm8450 and sc8280xp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-11-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>