Annotate specialx_pci_tbl as '__used' to fix following warning:

  CC      drivers/char/specialix.o
drivers/char/specialix.c:2358: warning: ‘specialx_pci_tbl’ defined but not used
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Roger Wolff <R.E.Wolff@BitWizard.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Annotate rocket_pci_ids as '__used' to fix following warning:

  CC      drivers/char/rocket.o
drivers/char/rocket.c:1767: warning: ‘rocket_pci_ids’ defined but not used
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Some platforms contain a Synopsys DesignWare APB UART that is attached
to a 32-bit APB bus where sub-word accesses are not allowed. Add a new
IO type (UPIO_DWAPB32) that performs 32 bit acccesses to the UART.

v2:
	- don't test for 32 bit in the output fast path, provide a
	  separate dwabp32_serial_out() function. Refactor
	  dwabp_serial_out() so that we can reuse the LCR saving
	  code.
v3:
	- rebased on top of "8250: use container_of() instead of
	  casting"
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The 8250 driver structure uart_8250_port took advantage of the fact
that the struct uart_port was the first member of its structure and
used an explicit cast to convert to the derived class. Replace the
explicit casts with container_of() for safety and clarity.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The kgdb invokes the poll_put_char and poll_get_char when communicating
with the host. This patch also changes the initialization order because the
kgdb will check at the very beginning, if there is a valid serial
driver.
Signed-off-by: Cosmin Cojocar <cosmin.cojocar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The dma_request_channel/dma_release_channel interfaces are not
built when DMADEVICES is not enabled, so make the driver depend on
DMADEVICES.  Also, the help text says that the driver enables & uses
PCH_DMA, which is not enabled, so select that.

ERROR: "__dma_request_channel" [drivers/serial/pch_uart.ko] undefined!
ERROR: "dma_release_channel" [drivers/serial/pch_uart.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This driver adds a basic console that uses the arm JTAG
DCC to transfer data back and forth. It has support for
ARMv6 and ARMv7.

This console is created under the HVC driver, and should be named
/dev/hvcX (or /dev/hvc0 for example).

Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add a notion about 16C950 UART, that is using DTR signal for RS485 mode.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If tty_register_driver() failed then tty_driver is still alive.
Free it with put_tty_driver().
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If second request_irq() failed then the first IRQ must be freed in
error handling code.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

UART driver of Intel EG20T(Topcliff) PCH

Intel EG20T PCH is the platform controller hub that is going to be used in
Intel's general embedded platform. All IO peripherals in
Intel EG20T PCH are actually devices sitting on AMBA bus.
Intel EG20T PCH has UART I/F. Using this I/F, it is able to access system
devices connected to UART.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the PCI UART on the ce4100.
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Noted by Stephen Rothwell
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Correct the KConfig as noted by Greg.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The printout for the type should be just "5xxx", so 512x users won't
wonder why they have a mpc52xx-type UART.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* use newly added for_each_console for iterating consoles
* add proper console locking
* do not initialize tmp twice
* no need to declare console_drivers, it's already done in console.h
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It allows users to see what consoles are currently known to the system
and with what flags.

It is based on Werner's patch, the part about traversing fds was
removed, the code was moved to kernel/printk.c, where consoles are
handled and it makes more sense to me.

Signed-off-by: Jiri Slaby <jslaby@suse.cz> [cleanups]
Signed-off-by: "Dr. Werner Fink" <werner@suse.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Use newly added for_each_console for iterating consoles.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: virtualization@lists.osdl.org
Cc: xen-devel@lists.xensource.com
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We reference termios and termiox in tty_driver.h, but we do not include
linux/termios.h where these are defined. Add the #include properly.

Otherwise when we include tty_driver.h, we get compile errors.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move it out of printk.c so that we can use it all over the code. There
are some potential users which will be converted to that macro in next
patches.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

AFAICT, these fields are not used anywhere.
Signed-off-by: Baurzhan Ismagulov <ibr@radix50.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Setting Rx FIFO size to 1 reduces reader process wakeup latency up to
20x for baud rates <= 9600. This patch sets the Rx FIFO size to 1 for
baud rates <= 9600 or if low latency has been requested for the tty.
Signed-off-by: Michael Trimarchi <michael@gandalf.sssup.it>
Signed-off-by: Bruno Morelli <bruno@evidence.eu.com>
Signed-off-by: Baurzhan Ismagulov <ibr@radix50.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Documentation about RS485 serial communications
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Grant Edwards <grant.b.edwards@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[Original From Ken Mills but I redid it using pr_ helpers instead]

Also fix up coding style, there are two warnings left but that is where
the CodingStyle tools blow up because they cannot handle

	if (blah) {
		foo
	} else switch (x) {
		case 1:
		}
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The mux supports several encoding schemes. Encoding 0 is a "not
recommended" mode still sometimes used. This has now been tested with
hardware that supports this mode, and found wanting.

Fix the FCS handling in this mode and correct the state machine.
Signed-off-by: Ken Mills <ken.k.mills@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This adds a driver for the serial ports found in VIA and WonderMedia
Systems-on-Chip. Interrupt-driven FIFO operation is implemented.
The hardware also supports pure register-based operation (which is
slower) and DMA-based FIFO operation. As the FIFOs are only 16 bytes
long, DMA operation is probably not worth the hassle.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Prototype driver for the IFX6x60 series of SPI attached modems by Jim
Stanley and Russ Gorby
Signed-off-by: Russ Gorby <richardx.r.gorby@intel.com>

[Some reworking and a major cleanup]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Add new ext4 inode tracepoints
  ext4: Don't call sb_issue_discard() in ext4_free_blocks()
  ext4: do not try to grab the s_umount semaphore in ext4_quota_off
  ext4: fix potential race when freeing ext4_io_page structures
  ext4: handle writeback of inodes which are being freed
  ext4: initialize the percpu counters before replaying the journal
  ext4: "ret" may be used uninitialized in ext4_lazyinit_thread()
  ext4: fix lazyinit hang after removing request

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  TTY: move .gitignore from drivers/char/ to drivers/tty/vt/
  TTY: create drivers/tty/vt and move the vt code there
  TTY: create drivers/tty and move the tty core files there

Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6:
  Staging: ath6kl: remove empty files that mess with 'distclean'
  staging: ath6kl: Fixing the driver to use modified mmc_host structure
  Staging: solo6x10: fix build problem

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  mmc: sh_mmcif: Convert extern inline to static inline.
  ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings.
  ARM: mach-shmobile: fix sh7372 after a recent clock framework rework
  ARM: mach-shmobile: include drivers/sh/Kconfig
  ARM: mach-shmobile: ap4evb: Add HDMI sound support
  ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support
  ARM: shmobile: remove sh_timer_config clk member

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: clkfwk: Fix up checkpatch warnings.
  sh: make some needlessly global sh7724 clocks static
  sh: add clk_round_parent() to optimize parent clock rate
  sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit.
  sh: nommu: Support building without an uncached mapping.
  sh: nommu: use 32-bit phys mode.
  sh: mach-se: Fix up SE7206 no ioport build.
  sh: intc: Update for single IRQ reservation helper.
  sh: clkfwk: Fix up rate rounding error handling.
  sh: mach-se: Rip out superfluous 7751 PIO routines.
  sh: mach-se: Rip out superfluous 770x PIO routines.
  sh: mach-edosk7705: Kill off machtype, consolidate board def.
  sh: mach-edosk7705: update for this century, kill off PIO trapping.
  sh: mach-se: Rip out superfluous 7206 PIO routines.
  sh: mach-systemh: Kill off dead board.
  sh: mach-snapgear: Kill off machtype, consolidate board def.
  sh: mach-snapgear: Rip out superfluous PIO routines.
  sh: mach-microdev: SuperIO-relative ioport mapping.

Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and
ext4_begin_ordered_truncate()
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Commit 5c521830 (ext4: Support discard requests when running in
no-journal mode) attempts to add sb_issue_discard() for data blocks
(in data=writeback mode) and in no-journal mode.  Unfortunately, this
no longer works, because in commit dd3932ed (block: remove
BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous
interface, and there are times when we call ext4_free_blocks() when we
are are holding a spinlock, or are otherwise in an atomic context.

For now, I've removed the call to sb_issue_discard() to prevent a
deadlock or (if spinlock debugging is enabled) failures like this:

BUG: scheduling while atomic: rc.sysinit/1376/0x00000002
Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1
Call Trace:
[<ffffffff810397ce>] __schedule_bug+0x5e/0x70
[<ffffffff81403110>] schedule+0x950/0xa70
[<ffffffff81060bad>] ? insert_work+0x7d/0x90
[<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30
[<ffffffff81061127>] ? queue_work+0x37/0x60
[<ffffffff8140377d>] schedule_timeout+0x21d/0x360
[<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540
[<ffffffff81402680>] wait_for_common+0xc0/0x150
[<ffffffff81041490>] ? default_wake_function+0x0/0x10
[<ffffffff812034bc>] ? submit_bio+0x7c/0x100
[<ffffffff810680a0>] ? wake_bit_function+0x0/0x40
[<ffffffff814027b8>] wait_for_completion+0x18/0x20
[<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210
[<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60
[<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120
[<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70
[<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30
[<ffffffff81191618>] ext4_truncate+0x178/0x5d0
[<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280
[<ffffffff810d8976>] vmtruncate+0x56/0x70
[<ffffffff811925cb>] ext4_setattr+0x14b/0x460
[<ffffffff811319e4>] notify_change+0x194/0x380
[<ffffffff81117f80>] do_truncate+0x60/0x90
[<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20
[<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20
[<ffffffff81127539>] do_last+0x5d9/0x770
[<ffffffff811278bd>] do_filp_open+0x1ed/0x680
[<ffffffff8140644f>] ? page_fault+0x1f/0x30
[<ffffffff81132bfc>] ? alloc_fd+0xec/0x140
[<ffffffff81118db1>] do_sys_open+0x61/0x120
[<ffffffff81118e8b>] sys_open+0x1b/0x20
[<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b

https://bugzilla.kernel.org/show_bug.cgi?id=22302Reported-by: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: jiayingz@google.com

It's not needed to sync the filesystem, and it fixes a lock_dep complaint.
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

Use an atomic_t and make sure we don't free the structure while we
might still be submitting I/O for that page.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The following BUG can occur when an inode which is getting freed when
it still has dirty pages outstanding, and it gets deleted (in this
because it was the target of a rename).  In ordered mode, we need to
make sure the data pages are written just in case we crash before the
rename (or unlink) is committed.  If the inode is being freed then
when we try to igrab the inode, we end up tripping the BUG_ON at
fs/ext4/page-io.c:146.

To solve this problem, we need to keep track of the number of io
callbacks which are pending, and avoid destroying the inode until they
have all been completed.  That way we don't have to bump the inode
count to keep the inode from being destroyed; an approach which
doesn't work because the count could have already been dropped down to
zero before the inode writeback has started (at which point we're not
allowed to bump the count back up to 1, since it's already started
getting freed).

Thanks to Dave Chinner for suggesting this approach, which is also
used by XFS.

  kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146!
  Call Trace:
   [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307
   [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b
   [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2
   [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5
   [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac
   [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d
   [<ffffffff81087910>] do_writepages+0x1c/0x25
   [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d
   [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10
   [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2
   [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c
   [<ffffffff810c14a3>] evict+0x22/0x92
   [<ffffffff810c1a3d>] iput+0x212/0x249
   [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9
   [<ffffffff810bdf6b>] d_kill+0x3d/0x5d
   [<ffffffff810be613>] dput+0x13a/0x147
   [<ffffffff810b990d>] sys_renameat+0x1b5/0x258
   [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c
   [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea
   [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38
   [<ffffffff810b99c6>] sys_rename+0x16/0x18
   [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Nick Bowler <nbowler@elliptictech.com>

Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and 'sh/intc-extension' into sh-fixes-for-linus

The clk_round_parent() change introduced various checkpatch warnings,
tidy them up.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>