- 24 Sep, 2003 20 commits
-
-
Joe Perches authored
-
Maximilian Attems authored
-
Michal Ludvig authored
-
Christoph Hellwig authored
-
David S. Miller authored
into nuts.ninka.net:/disk1/davem/BK/net-2.5
-
Andi Kleen authored
glibc assumes that the padding in statvfs() is zeroed. Do this in the compat layer too for future safety.
-
Rusty Russell authored
Minor changes to Jamie & Hugh's excellent futex patch. 1) Remove obsolete comment above hash array decl. 2) Clarify comment about TASK_INTERRUPTIBLE. 3) Andrew Morton says spurious wakeup is a bug. Catch it. 4) Use Jenkins hash. 5) Make hash function non-inline.
-
Rusty Russell authored
From: "Hu, Boris" <boris.hu@intel.com> Andrew reminded me of this. Simple change to split the futex lock into a per-hashchain lock. Don't bother cacheline aligning: Jamie points out that increasing FUTEX_HASHBITS would have more payoff. Ulrich Drepper reports 6% improvement in on a 4way futex-thrashing benchmark.
-
Linus Torvalds authored
-
Rusty Russell authored
Kconfig cleanup megapatch from Nicolas Kaiser <nikai@nikai.net>. modules.txt no longer exists, and the common wording used to refer to it sucks. This is all by Nicolas Kaiser's: at Randy and Matthew's request, "say M" changed to "choose M" (more sense for graphical front ends, too).
-
Andrew Morton authored
check that the brk value lies in bounds.
-
Linus Torvalds authored
This cleans up the PCI vs AGP GART handling, and turning the PCI GART hardware on and off.
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
flush after vmap.
-
Alexander Viro authored
The current seq_file code for resource handling will truncate the output if it overflows the seq_file buffer (one page). That's because it tries to traverse the resource tree in one big blob. So change that to instead traverse the resource tree one entry at a time and have a real iterator, and clean it up a bit.
-
Linus Torvalds authored
sanity-checking the information more carefully. The old code basically just used a random-number approach to determine how much to read.
-
Alexander Viro authored
This fixes a NULL ptr dereference in md_probe() noted by Helge Hafting. It even gets the things slightly better than they used to be, but late-boot magic in md.c is certainly a mess. Oh, well... It's _ugly_. md_probe() is misused there big way. The minimal fix is to revert the cleanup in md_probe() - replace int unit = *part; with int unit = MINOR(dev); However, that is crap solution. The problem is that md_probe() is called directly with bogus arguments - not only part is NULL (which triggers the oops), but dev (which is supposed to be dev_t value) is actually mdidx(mddev). Cleaner fix follows, but we really need to get the situation with gendisk allocations into the sane shape there. Sigh...
-
http://mdomsch.bkbits.net/linux-2.5-dellnameLinus Torvalds authored
into home.osdl.org:/home/torvalds/v2.5/linux
-
Anton Altaparmakov authored
into cantab.net:/home/aia21/ntfs-2.6
-
- 23 Sep, 2003 20 commits
-
-
Alexander Viro authored
Fix for typo in arch/mips/kernel/sysirix.c (spotted by Milton Miller)
-
Andrew Morton authored
From: Stephen Smalley <sds@epoch.ncsc.mil> I believe that the patch below fixes the legitimate leaks in the SELinux code. In some cases, it rearranges the code (moving the allocation later to reduce the need for further cleanup or linking the object into a containing structure earlier so that the policydb_destroy will handle it upon any subsequent errors).
-
Andrew Morton authored
From: Christoph Hellwig <hch@lst.de> Still three arches keep an unused copy around and quite a few places refer to it in comments still. Two of the two arches also include it in their _ksyms.c file, but given that softirq.h only contains macros (which are in hardirq.c as well) that's just a leftover as well.
-
Andrew Morton authored
From: "Randy.Dunlap" <rddunlap@osdl.org> Use common (normalized) asm syntax for lidt/lgdt, specifying that the operand is an input value instead of output.
-
Andrew Morton authored
From: Krzysztof Halasa <khc@pm.waw.pl> Fix wanxl for older gcc's, and fix a couple of warnings.
-
Andrew Morton authored
From: Dave Olien <dmo@osdl.org> this patch fixes a bug that appeared only on Alpha hardware with DAC960 controllers. The Command->PciDevice structure member was never initialized. This was passed to the pci scatter/gather functions. This didn't cause a problem for x86 platforms because the scatter/gather funtions never really used that information. Alpha platforms do use that pointer. The Command->PciDevice field was also redundant with the Controller->PCIDevice field, which IS initialized properly. So, eliminating the redundant structure member and substituting the Controller's member fixes the bug.
-
Andrew Morton authored
From: Adrian Bunk <bunk@fs.tum.de> CONFIG_SERIAL_21285_OLD depends on the non-existent option CONFIG_OBSOLETE, IOW it's not selectable, and the help text says "This is obsolete and will be removed during later 2.5 development.".
-
Andrew Morton authored
From: Andries.Brouwer@cwi.nl jpcartal@free.fr writes: I noticed that contrary to what was happening with 2.4.x kernel, suid root files don't loose their suid bit when they get overwritten by a normal user (see example below) Is this the intended behaviour or a bug ? Example : [root@localhost test]# chown root ~cartaljp/test/suid_test [root@localhost test]# chmod 4775 ~cartaljp/test/suid_test [root@localhost test]# exit [cartaljp@localhost test]$ cp /bin/ls suid_test [cartaljp@localhost test]$ ls -l total 72 -rwsrwxr-x 1 root cartaljp 67668 Sep 19 07:56 suid_test <- Suid bit is still set whereas with 2.4.x kernel it was reset. Yes. Here 2.4 had the terrible code mode = (inode->i_mode & S_IXGRP)*(S_ISGID/S_IXGRP) | S_ISUID; while 2.6 does things via notify_change(). However, in 2.6 notify_change() does not allow removal of the SUID bit because you are not owner of the file :-). So, we have to convince inode_change_ok() to do it anyway.
-
Andrew Morton authored
At present you can set CONFIG_HUGETLB_PAGE and not CONFIG_HUGETLBFS, which give the kernel low-level hugepage support, but no userspace API with which to access it. And with the recent hugetlbfs-accounting fix, the low-level code needs functions which are in hugetlbfs, so CONFIG_HUGETLBFS=n, CONFIG_HUGETLB_PAGE=y doesn't even link. So we flip things around: CONFIG_HUGETLB_PAGE is set if CONFIG_HUGETLBFS is set and CONFIG_HUGETLB_PAGE is unset if CONFIG_HUGETLBFS is unset. The CONFIG_HUGETLB_PAGE option hence disappears from the per-arch configuration menus.
-
Andrew Morton authored
From: "Chen, Kenneth W" <kenneth.w.chen@intel.com> We found a problem in hugetlbfs file system quota when using huge page via mmap. The mmap method in hugetlbfs_file_operation always takes quota for every mmap even for pages that are already allocated on that inode. This results in taxing the same hugepage multiple times and causing mmap to fail on existing file when quota mistakenly runs out.
-
Andrew Morton authored
- modules need blk_rq_prep_restart() (Florian Schanda <ma1flfs@bath.ac.uk>) - Remove unneeded inclusions from configs.c (Randy Dunlap) - The agp_setup() ifdef was backwards (Stephen Hemminger <shemminger@osdl.org>) - makefiles.txt typo fix (Paolo Ornati <ornati@despammed.com>)
-
Andrew Morton authored
From: Christoph Hellwig <hch@lst.de> All drivers that compile on ppc with CONFIG_ISA set (= all but some m68-only drivers), I looked at the compile warnings very closely and there are no new warnings or even errors this time :) drivers/char/Makefile needed to be reordered big time to keep the intialization order the same.
-
Andrew Morton authored
From: Ethan Benson <erbenson@alaska.net> Currently Linux allows the use of the utime() and utimes() syscalls on immutable or append-only files, this is incorrect. utime{s}() is not supposed to work if you lack write access to a file, in the case of an immutable file NOBODY has write access. for an append-only file it only makes sense to be able to update its time to present, not the past. I have checked BSD, and they implement the behavior I propose, for immutable files utime() and utimes() fail. for append-only files they fail if the time argument is not NULL.
-
Andrew Morton authored
From: John Levon <levon@movementarian.org> Not that many people are going to be using GCC 3.4 currently, but it might help a bit to prevent compilation bugs like that just witnessed in procfs. (And it consolidates the check_gcc implementation nicely)
-
Andrew Morton authored
From: Christoph Hellwig <hch@lst.de> Some junk which was needed before we did the big cleansweep for the sysrq syncing stuff.
-
Andrew Morton authored
From: Christoph Hellwig <hch@lst.de> Richard hasn't touched it for about a year and since then only bugfixes and my changes to the kernel interface went in. No one has stepped up to maintain it and with udev we have a proper replacement now. I will do some more work before 2.6 (mainly trying to implement Al's refcounting scheme to avoid stale entries), but that's it.
-
Andrew Morton authored
From: "David S. Miller" <davem@redhat.com> It's from Ingo Molnar. ksoftirqd kicks in way too early, so do more work in interrupt context before falling back. We can probably sysctl this thing, that way everyone gets what they want probably... (has been in -mm since 2.5.71 and I haven't heard a peep).
-
Andrew Morton authored
From: Manfred Spraul <manfred@colorfullife.com> - Remove cache_alloc_one_tail and cache_alloc_listfixup - there is no reason for their existance. - Print a bit more debugging info when slab corruption is detected.
-
Alexander Viro authored
Argh. A couple of places where we needed ..._encode_dev() had been lost in reordering the patchset - the most notable being ctty number in /proc/<pid>/stat. Fix follows:
-
Anton Altaparmakov authored
into cantab.net:/home/aia21/ntfs-2.6
-