Merge tag 'arm-soc/for-5.18/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig

This pull request contains Broadcom ARM64-based defconfig updates for
5.18, please pull the following:

- Florian enables Broadcom STB drivers for NAND, SATA, Ethernet switch,
USB PHY and host controllers, watchdog, PWM and Ethernet controller

* tag 'arm-soc/for-5.18/defconfig-arm64' of https://github.com/Broadcom/stblinux:
  arm64: defconfig: Enable additional Broadcom STB drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the driver for the Layerscape SFP (Security Fuse Processor) found
on most Layerscape SoCs. For example, a per-device unique serial number
is stored in the fuses.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-defconfig-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig

AT91: defconfig #2 for 5.18:

- Add EIC, remove DMATEST to sama7_defconfig

* tag 'at91-defconfig-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: configs: at91: sama7: Unselect CONFIG_DMATEST
  ARM: configs: at91: add eic

Link: https://lore.kernel.org/r/20220304144746.23779-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The DMA test client should be selected only when one is debugging a DMA
Device driver. There's no need to select the DMA test client by default,
unselect it.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220228085906.18508-1-tudor.ambarus@microchip.com

Add eic.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220228122326.1400954-3-claudiu.beznea@microchip.com

Merge tag 'qcom-arm64-defconfig-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM64 defconfig updates for v5.17

This enables GCC, TLMM pinctrl and the main interconnect provider for
the SM8450 platform.

* tag 'qcom-arm64-defconfig-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: Add SM8450 icc configs
  arm64: defconfig: Add SM8450 pinctrl config
  arm64: defconfig: Add SM8450 GCC config

Link: https://lore.kernel.org/r/20211222152219.3752973-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.17-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig

- Enable Airoha SoC on armv7 config.
- Enable CPU freq for arm64 based SoCs.
- Enable PMIC based (mt6397) RTC for mt8173

* tag 'v5.17-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC
  arm64: defconfig: Enable cpufreq for MediaTek
  arm64: defconfig: Enable MT6397 RTC

Link: https://lore.kernel.org/r/9b90b407-025b-ec78-a626-faccdbc7ab39@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm defconfig updates for v5.18

The Qualcomm Snapdragon 8916 devices come in both 32- or 64-bit form,
and even though the typical case so far has been to 64-bit, it's
possible to run the Dragonboard 410c in either mode.

Enable the relevant drivers in multi_v7_defconfig to enable this, and
other Snapdragon 8916 devices to run the 32-bit kernel.

* tag 'qcom-defconfig-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: multi_v7_defconfig: Enable drivers for DragonBoard 410c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This enables basic bootup support for the Airoha EN7523 SoC.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-5-nbd@nbd.nameSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Merge tag 'tegra-for-5.18-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

arm64: tegra: Default configuration updates for v5.18-rc1

Enables the GPCDMA driver that was recently introduced for Tegra186 and
later generation Tegra SoCs.

* tag 'tegra-for-5.18-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: tegra: Enable GPCDMA

Link: https://lore.kernel.org/r/20220225164741.1064416-5-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the BCM23550 and BCM53573 SoCs to have all of the ARM 32-bit SoCs
enabled.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable CONFIG_PHY_USB_BRCM (USB PHY driver) and CONFIG_USB_BRCMSTB which
allows us to enable the Broadcom STB USB drivers (OHCI, EHCI and XHCI).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM defconfig updates for v5.18

  - Enable the new Audio Graph Card2 driver which can handle sound cards
    more flexibly in the arm64 defconfig,
  - Disable unneeded 8250 serial options in shmobile_defconfig,
  - Enable additional support for Renesas platforms in the arm64
    defconfig.

* tag 'renesas-arm-defconfig-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable additional support for Renesas platforms
  ARM: shmobile: defconfig: Disable unneeded 8250 serial options
  arm64: defconfig: Enable Audio Graph Card2 driver

Link: https://lore.kernel.org/r/cover.1644587198.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig

AT91 defconfig #1 for 5.18:

- sama7 additions for NAND flash, crypto, cpuidle and cpufreq

* tag 'at91-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: configs: at91: sama7: add config for cpufreq
  ARM: configs: at91: sama7: enable cpu idle
  ARM: configs: at91: sama7: Enable crypto IPs and software algs
  ARM: configs: at91: sama7: Enable UBIFS_FS
  ARM: configs: at91: sama7: Enable NAND / SMC

Link: https://lore.kernel.org/r/20220225113220.51401-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig

i.MX defconfig change for 5.18:

- Add a new defconfig for Cortex-M based i.MXRT family.
- A series from Marcel Ziswiler to rebuild arm64 defconfig with
  'savedefconfig', and then enable various relevant options needed by
  Toradex verdin-imx8mm device.

* tag 'imx-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: defconfig: enable verdin-imx8mm relevant drivers as modules
  arm64: defconfig: build r8169 as a module
  arm64: defconfig: build imx-sdma as a module
  arm64: defconfig: enable imx8m pcie phy driver
  arm64: defconfig: enable bpf/cgroup firewalling
  arm64: defconfig: rebuild default configuration
  arm64: defconfig: re-order default configuration
  arm64: defconfig: enable pcieaer configuration
  arm64: defconfig: enable taskstats configuration
  ARM: imxrt_defconfig: Add i.MXRT family defconfig

Link: https://lore.kernel.org/r/20220222075226.160187-6-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/defconfig

ARM64 defconfig changes for TI K3 platforms for v5.17 merge window:

- Enable drivers for USB and SERDES IPs on TI K3 SoC

* tag 'ti-k3-config-for-v5.17-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: defconfig: Enable USB controller drivers for TI K3 SoC

Link: https://lore.kernel.org/r/20211223094040.15349-1-vigneshr@ti.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add config flags for CPUFreq. This includes enabling CPUFreq support,
CPUFreq DT driver and governors, default one being the conservative
governor.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-11-claudiu.beznea@microchip.com

Enable CPU idle support for SAMA7 config.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220113144900.906370-10-claudiu.beznea@microchip.com

Similar to sama5_defconfig, enable hardware acceleration for the
sama7 crypto IPs, enable crypto software implementations in case
the crypto IPs need a fallback to them, and enable the hash and
skcipher user interfaces in case one wants to offload the crypto
algs to the sama7 crypto IPs.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220204135905.512013-1-tudor.ambarus@microchip.com

sama7g5 contains a Static Memory Controller that can communicate with
NAND flashes. Enable UBIFS_FS in case one wants to put an ubifs rootfs
on a NAND flash. CONFIG_CRYPTO_LZO and CONFIG_CRYPTO_DEFLATE appear as
removed because they are selected by CONFIG_UBIFS_FS.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220202070244.150022-1-tudor.ambarus@microchip.com

Enable the Static Memory Controller. Tested with Micron MT29F4G08ABAEAWP
NAND flash. Software error correction is not needed, as the SMC includes
a PMECC error correction hardware module.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220111125641.903624-1-tudor.ambarus@microchip.com

Enable TEGRA_GPC_DMA in defconfig for Tegra186 and Tegra196 gpc
dma controller driver
Signed-off-by: Rajesh Gumasta <rgumasta@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable various drivers which support peripherals as found on the
Verdin iMX8M Mini et al. computer/system on modules:

- CONFIG_CAN_MCP251XFD
At least one Microchip MCP2518FDT SPI CAN controller which this driver
also supports may be found on the Verdin iMX8M Mini computer/system on
module.

- CONFIG_BT_HCIUART_MRVL, CONFIG_BT_MRVL, CONFIG_BT_MRVL_SDIO and
  CONFIG_MWIFIEX_SDIO
The AzureWave AW-CM276NF which these Bluetooth and Wi-Fi drivers also
support may be found on the Verdin iMX8M Mini (as well as the Apalis
iMX8, Colibri iMX8X and Verdin iMX8M Plus for that matter) computer/
system on module.

- CONFIG_SENSORS_LM75
The TI TMP75C temperature sensor which this driver also supports may be
found on the Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for
that matter) computer/system on module.

- CONFIG_SND_SOC_NAU8822
The Nuvoton Technology Corporation (NTC) NAU88C22YG which this driver
also supports may be found on the Verdin Development Board a carrier
board for the Verdin family of computer/system on module which the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
may be mated in.

- CONFIG_TI_ADS1015
The TLA2024 ADC which this driver also supports may be found on the
Verdin iMX8M Mini (as well as the Verdin iMX8M Plus for that matter)
computer/system on module.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Build Realtek Gigabit Ethernet driver as a module.

Network cards based on chipsets this driver supports are ubiquitous both
in regular PCIe as well as mini-PCIe and nowadays even various M.2
formats. It is therefore a suitable card to be used for any kind of PCIe
and/or Gigabit Ethernet testing. As it is not designed in, just enabling
it as a module seems most suitable.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This avoids firmware load error and sysfs fallback reported as follows:

[    0.199448] imx-sdma 302c0000.dma-controller: Direct firmware load
 for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.199487] imx-sdma 302c0000.dma-controller: Falling back to sysfs
 fallback for: imx/sdma/sdma-imx7d.bin
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This enables the i.MX 8M PCIe PHY driver (CONFIG_PHY_FSL_IMX8M_PCIE)
required for PCIe functionality.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This avoids the following systemd warning:

[    2.618538] systemd[1]: system-getty.slice: unit configures an IP
 firewall, but the local system does not support BPF/cgroup firewalling.
[    2.630916] systemd[1]: (This warning is only shown for the first
 unit using IP firewalling.)
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Run "make defconfig; make savedefconfig" to rebuild defconfig.

This dropped the following configuration options which are nowaday's
already enabled (resp. disabled) by default:

CONFIG_MEMCG_SWAP=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_FSL_MC_BUS=y
CONFIG_QCOM_SCM=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_USB_CONN_GPIO=m
CONFIG_USB_XHCI_PCI=m
CONFIG_SDM_GCC_845=y
CONFIG_SM_DISPCC_8250=y
CONFIG_SM_GCC_8150=y
CONFIG_SM_GCC_8250=y
CONFIG_COMMON_CLK_ZYNQMP=y

CONFIG_POWER_AVS was renamed to POWER_AVS_OMAP in commit bca815d6
("PM: AVS: smartreflex Move driver to soc specific drivers"). As there
are no 64-bit Arm OMAPs it getting dropped seems fair.

Note that the following user-selectable configuration options have been
preserved:

CONFIG_SECCOMP=y
CONFIG_SLIMBUS=m
CONFIG_INTERCONNECT=y
CONFIG_CONFIGFS_FS=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Use "make defconfig", "make savedefconfig" and friends to just assess
re-ordering of configuration items in defconfig.

This re-ordered the following configuration options:

CONFIG_BPF_JIT=y
CONFIG_SECCOMP=y
CONFIG_ARM_SCMI_PROTOCOL=y
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_INTEL_STRATIX10_SERVICE=y
CONFIG_INTEL_STRATIX10_RSU=m
CONFIG_QCOM_SCM=y
CONFIG_EFI_CAPSULE_LOADER=y
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y
CONFIG_CAN_FLEXCAN=m
CONFIG_PCIE_LAYERSCAPE_GEN4=y
CONFIG_FSL_MC_BUS=y
CONFIG_MTK_DEVAPC=m
CONFIG_SPI_CADENCE_QUADSPI=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MESON_GXL_PHY=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_QCOM_CPR=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_QORIQ_THERMAL=m
CONFIG_SUN8I_THERMAL=y
CONFIG_TEGRA_BPMP_THERMAL=m
CONFIG_ARM_SMC_WATCHDOG=y
CONFIG_MFD_CROS_EC_DEV=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_VIDEO_QCOM_CAMSS=m
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
CONFIG_DRM_NWL_MIPI_DSI=m
CONFIG_DRM_LONTIUM_LT9611UXC=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_IMX_AUDMIX=m
CONFIG_TYPEC_HD3SS3220=m
CONFIG_COMMON_CLK_SCMI=y
CONFIG_COMMON_CLK_ZYNQMP=y
CONFIG_IPQ_GCC_8074=y
CONFIG_SM_DISPCC_8250=y
CONFIG_QCOM_WCNSS_CTRL=m
CONFIG_ARCH_R8A774A1=y
CONFIG_ARCH_R8A774B1=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A774E1=y
CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_R8A77990=y
CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77970=y
CONFIG_ARCH_R8A779F0=y
CONFIG_HISI_PMU=y
CONFIG_QCOM_QFPROM=y
CONFIG_MUX_MMIO=y
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable CONFIG_PCIEAER which is required for CONFIG_ACPI_APEI_PCIEAER.
Commit 8c8ff55b ("PCI/AER: Don't select CONFIG_PCIEAER by default")
changed it to no longer being enabled by default.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable CONFIG_TASKSTATS which is required for CONFIG_TASK_XACCT (and
subsequently CONFIG_TASK_IO_ACCOUNTING). Previously, taskstats got
pulled in by KVM but that got changed in commit 63b3f96e
("kvm: Select SCHED_INFO instead of TASK_DELAY_ACCT").
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull ext4 fixes from Ted Ts'o:
 "Various bug fixes for ext4 fast commit and inline data handling.

  Also fix regression introduced as part of moving to the new mount API"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  fs/ext4: fix comments mentioning i_mutex
  ext4: fix incorrect type issue during replay_del_range
  jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
  ext4: fix potential NULL pointer dereference in ext4_fill_super()
  jbd2: refactor wait logic for transaction updates into a common function
  jbd2: cleanup unused functions declarations from jbd2.h
  ext4: fix error handling in ext4_fc_record_modified_inode()
  ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
  ext4: fix error handling in ext4_restore_inline_data()
  ext4: fast commit may miss file actions
  ext4: fast commit may not fallback for ineligible commit
  ext4: modify the logic of ext4_mb_new_blocks_simple
  ext4: prevent used blocks from being allocated during fast commit replay

Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix display of grouped aliased events in 'perf stat'.

 - Add missing branch_sample_type to perf_event_attr__fprintf().

 - Apply correct label to user/kernel symbols in branch mode.

 - Fix 'perf ftrace' system_wide tracing, it has to be set before
   creating the maps.

 - Return error if procfs isn't mounted for PID namespaces when
   synthesizing records for pre-existing processes.

 - Set error stream of objdump process for 'perf annotate' TUI, to avoid
   garbling the screen.

 - Add missing arm64 support to perf_mmap__read_self(), the kernel part
   got into 5.17.

 - Check for NULL pointer before dereference writing debug info about a
   sample.

 - Update UAPI copies for asound, perf_event, prctl and kvm headers.

 - Fix a typo in bpf_counter_cgroup.c.

* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf ftrace: system_wide collection is not effective by default
  libperf: Add arm64 support to perf_mmap__read_self()
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  perf stat: Fix display of grouped aliased events
  perf tools: Apply correct label to user/kernel symbols in branch mode
  perf bpf: Fix a typo in bpf_counter_cgroup.c
  perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
  perf session: Check for NULL pointer before dereference
  perf annotate: Set error stream of objdump process for TUI
  perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources

Pull perf fixes from Borislav Petkov:

 - Intel/PT: filters could crash the kernel

 - Intel: default disable the PMU for SMM, some new-ish EFI firmware has
   started using CPL3 and the PMU CPL filters don't discriminate against
   SMM, meaning that CPL3 (userspace only) events now also count EFI/SMM
   cycles.

 - Fixup for perf_event_attr::sig_data

* tag 'perf_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/pt: Fix crash with stop filters in single-range mode
  perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures
  selftests/perf_events: Test modification of perf_event_attr::sig_data
  perf: Copy perf_event_attr::sig_data on modification
  x86/perf: Default set FREEZE_ON_SMI for all

Pull objtool fix from Borislav Petkov:
 "Fix a potential truncated string warning triggered by gcc12"

* tag 'objtool_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix truncated string warning

Pull irq fix from Borislav Petkov:
 "Remove a bogus warning introduced by the recent PCI MSI irq affinity
  overhaul"

* tag 'irq_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  PCI/MSI: Remove bogus warning in pci_irq_get_affinity()

Pull EDAC fixes from Borislav Petkov:
 "Fix altera and xgene EDAC drivers to propagate the correct error code
  from platform_get_irq() so that deferred probing still works"

* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/xgene: Fix deferred probing
  EDAC/altera: Fix deferred probing

The ftrace.target.system_wide must be set before invoking
evlist__create_maps(), otherwise it has no effect.

Fixes: 53be5028 ("perf ftrace: Add 'latency' subcommand")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220127132010.4836-1-changbin.du@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add the arm64 variants for read_perf_counter() and read_timestamp().
Unfortunately the counter number is encoded into the instruction, so the
code is a bit verbose to enumerate all possible counters.
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220201214056.702854-1-robh@kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org