- 16 Oct, 2011 5 commits
-
-
Michał Mirosław authored
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
When enabling hardware timestamping for ptp v2 event packets, the software does not setup the queue for l4 packets, although layer 4 packets are valid for v2. This patch adds the flag which enables setting up a queue and enabling udp packet timestamping. Signed-off-by:
Jacob E Keller <jacob.e.keller@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Greg Rose authored
Implements the new netdev op to allow user configuration of spoof checking on a per VF basis. V2 - Change netdev spoof check op setting to bool Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
Greg Rose authored
Add configuration setting for drivers to turn spoof checking on or off for discrete VFs. v2 - Fix indentation problem, wrap the ifla_vf_info structure in #ifdef __KERNEL__ to prevent user space from accessing and change function paramater for the spoof check setting netdev op from u8 to bool. v3 - Preset spoof check setting to -1 so that user space tools such as ip can detect that the driver didn't report a spoofcheck setting. Prevents incorrect display of spoof check settings for drivers that don't report it. Signed-off-by: -
Bruce Allan authored
Commit 67fd4fcb (e1000e: convert to stats64) added the ability to update statistics more accurately and on-demand through the net_device_ops .ndo_get_stats64 hook, but introduced a locking bug on 82577/8/9 when linked at half-duplex (seen on kernels with CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_PROVE_LOCKING=y). The commit introduced code paths that caused a mutex to be locked in atomic contexts, e.g. an rcu_read_lock is held when irqbalance reads the stats from /sys/class/net/ethX/statistics causing the mutex to be locked to read the Phy half-duplex statistics registers. The mutex was originally introduced to prevent concurrent accesses of resources (the NVM and Phy) shared by the driver, firmware and hardware a few years back when there was an issue with the NVM getting corrupted. It was later split into two mutexes - one for the NVM and one for the Phy when it was determined the NVM, unlike the Phy, should not be protected by the software/firmware/hardware semaphore (arbitration of which is done in part with the SWFLAG bit in the EXTCNF_CTRL register). This latter semaphore should be sufficient to prevent resource contention of the Phy in the driver (i.e. the mutex for Phy accesses is not needed), but to be sure the mutex is replaced with an atomic bit flag which will warn if any contention is possible. Also add additional debug output to help determine when the sw/fw/hw semaphore is owned by the firmware or hardware. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Reported-by:
Francois Romieu <romieu@fr.zoreil.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com>
-
- 14 Oct, 2011 4 commits
-
-
Eric Dumazet authored
ftmac100 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. If frame is under 64 bytes, page is freed, so increase truesize only for bigger frames. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Add a 'truesize' argument to niu_rx_skb_append(), filled with rcr_size by the caller to properly account frag sizes in skb->truesize Signed-off-by:
-
Eric Dumazet authored
vmxnet3 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by:
-
Eric Dumazet authored
ftgmac100 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. If frame is under 64 bytes, page is freed, and truesize adjusted. Signed-off-by:
-
- 13 Oct, 2011 20 commits
-
-
Eric Dumazet authored
sky2 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by:
-
Eric Dumazet authored
e1000e allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by:
-
Eric Dumazet authored
ixgbe allocates half a page per skb fragment. We must account PAGE_SIZE/2 increments on skb->truesize, not the actual frag length. Signed-off-by:
-
Eric Dumazet authored
e1000 allocates half a page per skb fragment. We must account PAGE_SIZE/2 increments on skb->truesize, not the actual frag length. Signed-off-by:
-
Eric Dumazet authored
e1000 allocates a full page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by:
-
Eric Dumazet authored
bnx2 allocates a full page per fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by:
-
Eric Dumazet authored
Fix skb truesize underestimations of this driver. Each frag truesize is exactly rx_frag_size bytes. (2048 bytes per default) A driver should not use "sizeof(struct sk_buff)" at all. Signed-off-by: Eric Dumazet <eric.dumazet> Signed-off-by:
-
Eric Dumazet authored
skb truesize currently accounts for sk_buff struct and part of skb head. kmalloc() roundings are also ignored. Considering that skb_shared_info is larger than sk_buff, its time to take it into account for better memory accounting. This patch introduces SKB_TRUESIZE(X) macro to centralize various assumptions into a single place. At skb alloc phase, we put skb_shared_info struct at the exact end of skb head, to allow a better use of memory (lowering number of reallocations), since kmalloc() gives us power-of-two memory blocks. Unless SLUB/SLUB debug is active, both skb->head and skb_shared_info are aligned to cache lines, as before. Note: This patch might trigger performance regressions because of misconfigured protocol stacks, hitting per socket or global memory limits that were previously not reached. But its a necessary step for a more accurate memory accounting. Signed-off-by:
-
-
Carolyn Wyborny authored
This change updates the driver version to 3.2.10. Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
-
Akeem G. Abodunrin authored
This patch adds VMDq loopback pf support for i350 devices. The patch is necessary since the register that enabled loopback was moved and renamed from DTXSWC to TXSWC. Signed-off-by:
"Akeem G. Abodunrin" <akeem.g.abodunrin@intel.com> Signed-off-by:
-
Emil Tantilov authored
igb_update/validate_nvm_checksum_with_offset() should be static. Also removes unneeded prototypes for the above functions. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
-
Alexander Duyck authored
On i350 when traffic is looped back from a VF to the PF the value is byte swapped from the normal format. In order to address this we need to add a flag indicating that the ring will need to byte swap the loopback packets prior to processing them. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Alexander Duyck authored
Since we mask interrupts in EIMS not in IMS there is no need to re-enable mask bits in that register. As such we can remove the write to IMS from the end of igb_msix_other. Signed-off-by:
-
Alexander Duyck authored
This change allows support for per packet timesync and global device reset on the i350 adapter. These features were supported on both 82580 and i350 however it looks like several checks where not updated and as such the i350 support was not enabled. Signed-off-by:
-
Alexander Duyck authored
This change makes certain that one interrupt is always initialized in igb_request_irq. In addition we drop the use of adapter->pdev and instead just call pdev since we made a local copy of the pointer earlier in the function. Signed-off-by:
-
Alexander Duyck authored
This is mostly a drop of unnecessary pointer defines for q_vector when we don't have issues with line width and don't have multiple references to the pointer. Signed-off-by:
-
Mark Rustad authored
Correct a check for change in FCoE priority when IEEE mode DCB is in use. In IEEE mode a different function has to be used to get the FCoE priority mask. Also, the check for the mask assumed that only one priority was set. In case there should be more than one, check just the bit. These changes help avoid link flapping issues that can come up when IEEE DCB is in use. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
-
Amir Hanania authored
Add 2 new counters to ethtool: 1. Count DDP allocation failure since we max the number of buffers allowed in one DDP context. 2. Count DDP allocation failure since we max the number of buffers allowed in one DDP context when we alloc an extra buffer. Signed-off-by:
Amir Hanania <amir.hanania@intel.com> Tested-by:
-
Greg Rose authored
It is possible for a VF to set an invalid target DMA address in its Tx/Rx descriptor buffer pointers. The workarounds in this patch will guard against such an event and issue a VFLR to the VF in response. The VFLR will shut down the VF until an administrator can take action to investigate the event and correct the problem. Signed-off-by:
-
- 12 Oct, 2011 1 commit
-
-
Murali Raja authored
This patch exposes the tos value for the TCP sockets when the TOS flag is requested in the ext_flags for the inet_diag request. This would mainly be used to expose TOS values for both for TCP and UDP sockets. Currently it is supported for TCP. When netlink support for UDP would be added the support to expose the TOS values would alse be done. For IPV4 tos value is exposed and for IPV6 tclass value is exposed. Signed-off-by:
Murali Raja <muralira@google.com> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Acked-by:
-
- 11 Oct, 2011 5 commits
-
-
Dan Carpenter authored
We dereference doi_def on the line before the NULL check. It has been this way since 2008. I checked all the callers and doi_def is always non-NULL here. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
-
git://git.infradead.org/users/linville/wireless-nextJohn W. Linville authored
Conflicts: Documentation/feature-removal-schedule.txt
-
John W. Linville authored
CC [M] drivers/net/wireless/ath/ath6kl/cfg80211.o drivers/net/wireless/ath/ath6kl/cfg80211.c:1838:2: warning: initialization from incompatible pointer type Caused by commit e9f935e3... Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
-
- 10 Oct, 2011 5 commits
-
-
Ian Campbell authored
Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
danborkmann@iogearbox.net authored
If skb is NULL, then stack trace is thrown anyway on dereference. Therefore, the stack trace triggered by BUG_ON is duplicate. Signed-off-by:
Daniel Borkmann <danborkmann@googlemail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
