Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Fixes: f587de0e ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if we can elide the load. Cancel if the new candidate
isn't identical to previous store.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The fib expression stores to a register, so we can't add empty stub.
Check that the register that is being written is in fact redundant.

In most cases, this is expected to cancel tracking as re-use is
unlikely.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this
tunnel expression performs. This allows to skip this redundant operation.
If the destination contains a different selector, update the register
tracking information. This patch does not perform bitwise tracking.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this
xfrm expression performs. This allows to skip this redundant operation.
If the destination contains a different selector, update the register
tracking information.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this
socket expression performs. This allows to skip this redundant
operation.  If the destination contains a different selector, update the
register tracking information.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The immediate expression might clobber existing data on the registers,
cancel register tracking for the destination register.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this
osf expression performs. Always cancel register tracking for jhash since
this requires tracking multiple source registers in case of
concatenations. Perform register tracking (without bitwise) for symhash
since input does not come from source register.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Allow to recycle the previous output of the OS fingerprint expression
if flags and ttl are the same.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Random and increment are stateful, each invocation results in fresh output.
Cancel register tracking for these two expressions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

its enough to export the meta get reduce helper and then call it
from nft_meta_bridge too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In most cases, nft_lookup will be read-only, i.e. won't clobber
registers.  In case of map, we need to cancel the registers that will
see stores.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this ct
expression performs. This allows to skip this redundant operation. If
the destination contains a different selector, update the register
tracking information.

Export nft_expr_reduce_bitwise as a symbol since nft_ct might be
compiled as a module.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Output of expressions might be larger than one single register, this might
clobber existing data. Reset tracking for all destination registers that
required to store the expression output.

This patch adds three new helper functions:

- nft_reg_track_update: cancel previous register tracking and update it.
- nft_reg_track_cancel: cancel any previous register tracking info.
- __nft_reg_track_cancel: cancel only one single register tracking info.

Partial register clobbering detection is also supported by checking the
.num_reg field which describes the number of register that are used.

This patch updates the following expressions:

- meta_bridge
- bitwise
- byteorder
- meta
- payload

to use these helper functions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Skip register tracking for expressions that perform read-only operations
on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to
avoid defining stubs for these expressions.

This patch re-enables register tracking which was disabled in ed5f85d4
("netfilter: nf_tables: disable register tracking"). Follow up patches
add remaining register tracking for existing expressions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The function sets the pernet boolean to avoid the spurious warning from
nf_ct_lookup_helper() when assigning conntrack helpers via nftables.

Fixes: 1a64edf5 ("netfilter: nft_ct: add helper set support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

as of commit 4608fdfc
("netfilter: conntrack: collect all entries in one cycle")
conntrack gc was changed to run every 2 minutes.

On systems where conntrack hash table is set to large value, most evictions
happen from gc worker rather than the packet path due to hash table
distribution.

This causes netlink event overflows when events are collected.

This change collects average expiry of scanned entries and
reschedules to the average remaining value, within 1 to 60 second interval.

To avoid event overflows, reschedule after each bucket and add a
limit for both run time and number of evictions per run.

If more entries have to be evicted, reschedule and restart 1 jiffy
into the future.
Reported-by: Karel Rericha <karel@maxtel.cz>
Cc: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Saeed Mahameed says:

====================
mlx5-updates-2022-03-18

1) XDP multi buffer support

This series enables XDP on non-linear legacy RQ in multi buffer mode.

When XDP is enabled, fragmentation scheme on non-linear legacy RQ is
adjusted to comply to limitations of XDP multi buffer (fragments of the
same size). DMA addresses of fragments are stored in struct page for the
completion handler to be able to unmap them. XDP_TX is supported.

XDP_REDIRECT is not yet supported, the XDP core blocks it for multi
buffer packets at the moment.

2) Trivial cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

ipsec-next

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2022-03-19

1) Delete duplicated functions that calls same xfrm_api_check.
   From Leon Romanovsky.

2) Align userland API of the default policy structure to the
   internal structures. From Nicolas Dichtel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This code is fine, but it's easier to review if we use snprintf()
instead of sprintf().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220318074723.GA6617@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The skb will be checked in kfree_skb(), so remove the outside check.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220318072728.2659578-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2022-03-17

This series contains updates to i40e and igb drivers.

Tom Rix moves a conversion to little endian to occur only when the
value is used for i40e. He also zeros out a structure to resolve
possible use of garbage value for igb as reported by clang.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  igb: zero hwtstamp by default
  i40e: little endian only valid checksums
====================

Link: https://lore.kernel.org/r/20220317160236.3534321-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-next-2022-03-18' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
bluetooth-next pull request for net-next:

 - Add support for Asus TF103C
 - Add support for Realtek RTL8852B
 - Add support for Realtek RTL8723BE
 - Add WBS support to mt7921s

* tag 'for-net-next-2022-03-18' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (24 commits)
  Bluetooth: ath3k: remove superfluous header files
  Bluetooth: bcm203x: remove superfluous header files
  Bluetooth: hci_bcm: Add the Asus TF103C to the bcm_broken_irq_dmi_table
  Bluetooth: mt7921s: Add WBS support
  Bluetooth: mt7921s: Add .btmtk_get_codec_config_data
  Bluetooth: mt7921s: Add .get_data_path_id
  Bluetooth: mt7921s: Set HCI_QUIRK_VALID_LE_STATES
  Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt
  Bluetooth: btmtkuart: fix error handling in mtk_hci_wmt_sync()
  Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed
  Bluetooth: Send AdvMonitor Dev Found for all matched devices
  Bluetooth: msft: Clear tracked devices on resume
  Bluetooth: fix incorrect nonblock bitmask in bt_sock_wait_ready()
  Bluetooth: Don't assign twice the same value
  Bluetooth: btrtl: Add support for RTL8852B
  Bluetooth: hci_uart: add missing NULL check in h5_enqueue
  Bluetooth: Fix use after free in hci_send_acl
  Bluetooth: btusb: Use quirk to skip HCI_FLT_CLEAR_ALL on fake CSR controllers
  Bluetooth: hci_sync: Add a new quirk to skip HCI_FLT_CLEAR_ALL
  Bluetooth: btmtkuart: fix the conflict between mtk and msft vendor event
  ...
====================

Link: https://lore.kernel.org/r/20220318224752.1477292-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Variable index is being assigned a value that is never read, it is being
re-assigned later in a following for-loop. The assignment is redundant
and can be removed.

Cleans up clang scan build warning:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:1358:17: warning:
Although the value stored to 'index' is used in the enclosing expression,
the value is never actually read from 'index' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220318012035.89482-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Variable sie is being assigned a value that is never read. The
The assignment is redundant and can be removed.

Cleans up clang scan build warning:
drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1054:22: warning:
Although the value stored to 'size' is used in the enclosing
expression, the value is never actually read from 'size'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220318005021.82073-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In some corner cases, the peer handing an incoming ADD_ADDR option, can
receive a retransmitted ADD_ADDR for the same address before the subflow
creation completes.

We can avoid the above issue by generating and sending the ADD_ADDR echo
before starting the MPJ subflow connection.

This slightly changes the behaviour of the packetdrill tests as the
ADD_ADDR echo packet is sent earlier.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20220317221444.426335-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Let's remove unnecessary brackets around CONFIG_AF_UNIX_OOB.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/r/20220317032308.65372-1-kuniyu@amazon.co.jpSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is no function mlx5e_get_sq(), remove the declaration.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>

Starting from commit
4cab346b ("net/mlx5: No command allowed when command interface is not ready"),
no calls to mlx5_cmd_trigger_completions() are external to cmd.c anymore.
Make it a static function.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

After introducing multi-buffer XDP_TX, the MLX5E_XDP_TX_DS_COUNT define
became misleading. It's no longer the DS count of an XDP_TX WQE, this
WQE can be longer because of fragments.

As this define is only used at one place in mlx5e_open_xdpsq(), it's
also not very useful anymore. This commit removes the define and puts
the calculation of ds_count for prefilled single-fragment WQEs inline.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Now that legacy RQ implements XDP in the non-linear mode, stop blocking
this configuration. Allow non-linear mode only for programs aware of
multi buffer.

XDP performance with linear mode RQ hasn't changed.

Baseline (MTU 1500, TX MPWQE, legacy RQ, single core):
 60-byte packets, XDP_DROP: 11.25 Mpps
 60-byte packets, XDP_TX: 9.0 Mpps
 60-byte packets, XDP_PASS: 668 kpps

Multi buffer (MTU 9000, TX MPWQE, legacy RQ, single core):
 60-byte packets, XDP_DROP: 10.1 Mpps
 60-byte packets, XDP_TX: 6.6 Mpps
 60-byte packets, XDP_PASS: 658 kpps
 8900-byte packets, XDP_DROP: 769 kpps (100% of sent packets)
 8900-byte packets, XDP_TX: 674 kpps (100% of sent packets)
 8900-byte packets, XDP_PASS: 637 kpps
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This commit enables passing multi buffer XDP frames to the TX handlers
on XDP_TX. Fragments are DMA synchronized to the device and queued to
the xdpi_fifo for a subsequent unmapping.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The next commit will add more indentation levels to mlx5e_xmit_xdp_buff.
To keep indentation minimal, unindent the else-block of the if-statement
by doing an early return.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

xmit_xdp_frame is extended to support sending fragmented XDP frames. The
next commit will start using this functionality.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When MPWQE is disabled, mlx5e_open_xdpsq() prefills the common fields of
WQEs in the XDP SQ to save time when sending packets.
mlx5e_xmit_xdp_frame() runs on the prefilled fields, however, sending
multi buffer XDP frames would require changing some of these fields on a
per-packet basis. Besides that, mlx5e_xmit_xdp_frame() will be used as a
fallback to send multi buffer XDP frames when MPWQE is enabled (MPWQE
can only handle linear packets).

In order to prepare for XDP multi buffer support, this commit introduces
a mode for mlx5e_xmit_xdp_frame() that fills all the fields itself.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When MPWQE is disabled, mlx5e_open_xdpsq prefills the common fields of
WQEs in the XDP SQ to save time when sending packets. One of such fields
is eseg->inline_hdr.sz, which can be either 0 or MLX5E_XDP_MIN_INLINE,
depending on the inline mode of the SQ.

The inline mode can't change during the lifetime of the SQ, so setting
this field again in mlx5e_xmit_xdp_frame is redundant. Moreover, the
xmit function only sets it to MLX5E_XDP_MIN_INLINE, but not to 0 in the
other case.

This commit removes the redundant assignment in mlx5e_xmit_xdp_frame.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The implementations of xmit_xdp_frame get the xdpi parameter of type
struct mlx5e_xdp_info for the sole purpose of calling
mlx5e_xdpi_fifo_push() on success.

This commit moves this call outside of xmit_xdp_frame, shifting this
responsibility to the caller. It will allow more fine-grained handling
of XDP info for cases when an xdp_frame is fragmented.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Use page_pool_set_dma_addr() to store the DMA address of a page inside
struct page, in order to avoid passing struct mlx5e_dma_info to XDP
handlers. Previously, struct mlx5e_dma_info was used to pass both the
DMA address and the page, and it worked well for the single-fragment
case.

When XDP multi buffer is in use, and a fragmented xdp_frame has to be
transmitted, the driver needs to know the DMA addresses of fragments,
however, the array of fragments in struct skb_shared_info doesn't
contain them. In order to pass the DMA addresses, the driver puts them
into struct page itself, which is accessible from the array of fragments
in struct skb_shared_info. The existing XDP handlers are modified to
remove the dependency on struct mlx5e_dma_info.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This commit adds XDP multi buffer support to the RX path in the
non-linear legacy RQ mode. mlx5e_xdp_handle is called from
mlx5e_skb_from_cqe_nonlinear.

XDP_TX action for fragmented XDP frames is not yet supported and
blocked.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The implementation of XDP in mlx5e assumes that the frame size is equal
to the page size. Force this limitation in the non-linear mode for XDP
multi buffer.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>