- 21 Jan, 2005 40 commits
-
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Hirofumi Ogawa authored
The default config may be set by distributor. With this change, the user can now know the current NLS used by FAT. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Hirofumi Ogawa authored
- Replaces the "number of reserved clusters" by FAT_START_ENT. - The ->clusters is total number of clusters. Instead of it, use the maximum cluster number (->max_cluster). By this change, removes the some "->clusters + 2" calculation. - Adds inline function for cluster to block number conversion. And replaces the open-coding for it. Signed-off-by:
-
Hirofumi Ogawa authored
This patch is just cleanup (whitespace, and place of functions is changed). No changes of logic. Signed-off-by:
-
Hirofumi Ogawa authored
Fix typo in comment Signed-off-by:
-
Hirofumi Ogawa authored
Signed-off-by:
-
Hirofumi Ogawa authored
Signed-off-by:
-
Hirofumi Ogawa authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Hirofumi Ogawa authored
Signed-off-by:
-
Hirofumi Ogawa authored
Signed-off-by:
-
Hirofumi Ogawa authored
From <lsr@neapel230.server4you.de> This patch inlines shortname_info_to_lcase() by hand. At least my compiler (gcc 3.3.4 from Debian) doesn't go all the way, so the compiled text size is decreased by this patch. And IMHO the code gets more readable, too. The terms (base->valid && ext->valid), (ext->lower || ext->upper) and (base->lower || base->upper) are trivially found to be true at the single callsite of shortname_info_to_lcase(). The relevant lines are included in this patch file. Signed-off-by:
-
Hirofumi Ogawa authored
From Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Fix error code. Signed-off-by:
-
Hirofumi Ogawa authored
From Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by:
-
Hirofumi Ogawa authored
From Christoph Hellwig <hch@lst.de> We don't have the union in "struct inode" and "struct super_block", so we doesn't need xxx_fs_i.h and xxx_fs_sb.h anymore. Signed-off-by:
-
Hirofumi Ogawa authored
The patch below removes fatfs_syms.c All EXPORT_SYMBOL's are moved to the files where the actual functions are. Signed-off-by:
-
Andi Kleen authored
Convert amdtp driver to compat_ioctl Signed-off-by:
Andi Kleen <ak@muc.de> Signed-off-by:
-
Andi Kleen authored
Convert video1394 driver to compat_ioctl Signed-off-by:
-
Andi Kleen authored
Convert dv1394 driver to compat_ioctl Signed-off-by:
-
Andi Kleen authored
Convert the sis framebuffer driver to compat ioctl. Signed-off-by:
Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
-
Andi Kleen authored
Forward compat_ioctl through the frame buffer layer. Signed-off-by:
-
Andi Kleen authored
Convert the cciss driver to compat_ioctl. This cleans up a lot of code. I don't have such hardware thus this is only compile tested. Signed-off-by:
-
Andi Kleen authored
Support passing down of compat_ioctl on block devices. This is needed for the compat_ioctl conversion of block drivers. Signed-off-by:
-
Andi Kleen authored
Convert MAD driver to compat/unlocked_ioctl. Streamlines the code a bit. Signed-off-by:
-
Andi Kleen authored
While doing some compat_ioctl conversions I noticed a few issues in compat_sys_ioctl: - It is not completely compatible to old ->ioctl because the traditional common ioctls are not checked before it. I added a check for those. The main advantage is that the handler now works the same as a traditional handler even when it returns -EINVAL - The private socket ioctl check should only apply for sockets. - There was a security hook missing. Drawback is that it uses the same hook now, and the LSM module cannot distingush between 32bit and 64bit clients. But it'll have to live with that for now. Signed-off-by:
-
Andi Kleen authored
Convert the XFS ioctl handlers over to unlocked_ioctl and compat_ioctl. Signed-off-by:
-
Ingo Molnar authored
Adds 3 new completion API calls, which are a straightforward extension of the current APIs: int wait_for_completion_interruptible(struct completion *x); unsigned long wait_for_completion_timeout(struct completion *x, unsigned long timeout); unsigned long wait_for_completion_interruptible_timeout( struct completion *x, unsigned long timeout); This enables the conversion of more semaphore-using code to completions. There is code that cannot be converted right now (and is forced to use semaphores) because these primitives are missing. Thomas Gleixner has a bunch of patches to make use of them. Signed-off-by:Ingo Molnar <mingo@elte.hu> Tested-by:
-
Corey Minyard authored
This patch fixes counting of unhandled messages. Messages that were handled internally by the driver (to the NULL user) were miscounted as unhanlded responses. This counts them properly. This patch also fixes the DMI 16-byte setting, which was set as a 16-bit setting. It also uses the right value to initilize the address memory when using a memory-based interface. Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Christoph Hellwig authored
To convert page->index to a byte index you need to cast it to loff_t first so it's a 64bit value. There have been quite a few places that got it wrong in the kernel. To make it easier a nice little helper would be nice, and in fact the NFS code already has it. Let's move it to pagemap.h so everyone can use it. Signed-off-by:
-
Christoph Hellwig authored
sa_handler isn't the first member of struct sigaction on mips. Use C99 initializers to avoid a compiler warning. (There don't seem to be more serious problems as mips worked with that warning for ages) Signed-off-by:
-
Andi Kleen authored
Compiling an allyesconfig kernel straight with a gcc 4.0 snapshot gives nearly 10k new warnings like: warning: pointer targets in passing argument 5 of `cpuid' differ in signedness Since the sheer number of these warnings was too much even for the most determined kernel janitors (I actually asked ;-) and I don't think it's a very serious issue to have these mismatches I submitted an new option to gcc to disable it. It was incorporated in gcc mainline now. This patch makes the kernel compilation use it. There are still quite a lot of new warnings with 4.0 (mostly about uninitialized variables), but the compile log looks much nicer nnow. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Chris Wright authored
Most of the include/asm-*/resource.h headers are the same as one another. This patch makes one generic version, include/asm-generic/resource.h, and uses that when appropriate. The only vaguely interesting things here are that the generic version introduces a new _STK_LIM_MAX macro, which can be populated by an arch (ia64 and parisc needed that). Also, some arches hid RLIM_INFINITY under __KERNEL__, while others did not. The generic version does not, so the following arches will see that change: arm, arm26, mips, ppc, ppc64, sh (and hence sh64) And, finally, some arches maintain their own order for the resource numbers. This is now marked by __ARCH_RLIMIT_ORDER, and is used by the following arches: alpha, mips, sparc, and sparc64. This actually uncovered a mips bug (fix already sent, this patch is relative to that fix), where the default RLIMIT_MEMLOCK was set to RLIM_INFINITY and RLIMIT_NPROC set to MLOCK_LIMIT (the latter is no big deal because RLIMIT_NPROC default is overwritten dynamically during bootup in fork_init()). Also, this change makes alpha's default for RLIMIT_NPROC change from RLIM_INFINITY to 0, but again...no problem as it's dynamically overwritten during bootup. The following arches are left untouched: m68knommu: untouched (uses m68k/resource.h) sh64: untouched (uses asm-sh/resource.h) um: untouched (uses arch code already) Signed-off-by:Chris Wright <chrisw@osdl.org> Signed-off-by:
-
Eric Lammerts authored
I have a problem with errors=panic on ext3. When a panic occurs, the error event is not recorded anywhere. So after the reboot, e2fsck doesn't kick in, the file system gets mounted again and the box panics again... Patch below moves the ERRORS_PANIC test down a bit so the journal is aborted before panic() is called. Signed-off-by:
Eric Lammerts <eric@lammerts.org> Signed-off-by:
-
H. Peter Anvin authored
The use of U+F800 to U+F804 has been deprecated since 2003; this makes the deprecation effective by replacing these characters with the officially assigned U+23BA to U+23BD. It also updates unicode.txt to match the latest version from the LANANA webpage. Signed-off-by:
-
Egbert Eich authored
So far the X.Org/XFree86 Xservers use internal functions to perform saving/restoring of console fonts. This doesn't work under all circumstances and has disadvantages: 1. On some platforms (IA64) X needs to POST the BIOS before it even has a chance to access the hardware itself. This POSTing will usually undo any changes to the graphics hardware that the kernel may have done. 2. More and more drivers fully rely on BIOS support. However the BIOS functions which could be used to save/restore register settings may be broken so the only way of mode save/restore is getting/setting the BIOS mode ID. This will restore the BIOSes default fonts, not the custom font that the user may have loaded. I would like to utilize the kernel's save/restore console fonts ioctls to save/restore the text mode console fonts from inside X. The patch does two things: 1. Eliminates the optimization that returns from vgacon_adjust_height() early (without reprogramming the HW) when the hight of the font hasn't changed. 2. Resets the stored 'from' and 'to' lines for the text cursor in vgacon_adjust_height() to cause vgacon_set_cursor_size() reprogram the textcursor start and end line. These are necessary to sanitize the HW in case something other than the kernel has changed the register values without restoring them properly. I'm fully aware that in the long run we will need to look into a new driver model for graphics where no two instances fight over who gets register access. However such a model won't be created nor will we get the majority of the drivers ported over night. Therefore we need to find an interim solution for the most pressing problems. Signed-off-by:
Egbert Eich <eich@freedesktop.org> Approved-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
