- 11 Jul, 2016 40 commits
-
-
Richard Leitner authored
[ Upstream commit 05be8d41 ] If i2c_device_id *id is NULL and acpi_match_device returns NULL too, then chipset may be unitialized when accessing &ak_def_array[chipset] in ak8975_probe. Therefore initialize chipset to AK_MAX_TYPE, which will return an error when not changed. This patch fixes the following maybe-uninitialized warning: drivers/iio/magnetometer/ak8975.c: In function ‘ak8975_probe’: drivers/iio/magnetometer/ak8975.c:788:14: warning: ‘chipset’ may be used uninitialized in this function [-Wmaybe-uninitialized] data->def = &ak_def_array[chipset]; Signed-off-by:
Richard Leitner <dev@g0hl1n.net> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Sven Eckelmann authored
[ Upstream commit d1a65f17 ] _batadv_update_route rcu_derefences orig_ifinfo->router outside of a spinlock protected region to print some information messages to the debug log. But this pointer is not checked again when the new pointer is assigned in the spinlock protected region. Thus is can happen that the value of orig_ifinfo->router changed in the meantime and thus the reference counter of the wrong router gets reduced after the spinlock protected region. Just rcu_dereferencing the value of orig_ifinfo->router inside the spinlock protected region (which also set the new pointer) is enough to get the correct old router object. Fixes: e1a5382f ("batman-adv: Make orig_node->router an rcu protected pointer") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit c4fdb6cf ] When removing a single interface while a broadcast or ogm packet is still pending then we will free the forward packet without releasing the queue slots again. This patch is supposed to fix this issue. Fixes: 6d5808d4 ("batman-adv: Add missing hardif_free_ref in forw_packet_free") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> [sven@narfation.org: fix conflicts with current version] Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit c7829666 ] The encapsulated ethernet and VLAN header may be outside the received ethernet frame. Thus the skb buffer size has to be checked before it can be parsed to find out if it encapsulates another batman-adv packet. Fixes: 42019357 ("batman-adv: softif bridge loop avoidance") Signed-off-by:
-
Jason Baron authored
[ Upstream commit bc22af74 ] Khugepaged attempts to raise min_free_kbytes if its set too low. However, on boot khugepaged sets min_free_kbytes first from subsys_initcall(), and then the mm 'core' over-rides min_free_kbytes after from init_per_zone_wmark_min(), via a module_init() call. Khugepaged used to use a late_initcall() to set min_free_kbytes (such that it occurred after the core initialization), however this was removed when the initialization of min_free_kbytes was integrated into the starting of the khugepaged thread. The fix here is simply to invoke the core initialization using a core_initcall() instead of module_init(), such that the previous initialization ordering is restored. I didn't restore the late_initcall() since start_stop_khugepaged() already sets min_free_kbytes via set_recommended_min_free_kbytes(). This was noticed when we had a number of page allocation failures when moving a workload to a kernel with this new initialization ordering. On an 8GB system this restores min_free_kbytes back to 67584 from 11365 when CONFIG_TRANSPARENT_HUGEPAGE=y is set and either CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y or CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y. Fixes: 79553da2 ("thp: cleanup khugepaged startup") Signed-off-by:
Jason Baron <jbaron@akamai.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 8148a73c ] If /proc/<PID>/environ gets read before the envp[] array is fully set up in create_{aout,elf,elf_fdpic,flat}_tables(), we might end up trying to read more bytes than are actually written, as env_start will already be set but env_end will still be zero, making the range calculation underflow, allowing to read beyond the end of what has been written. Fix this as it is done for /proc/<PID>/cmdline by testing env_end for zero. It is, apparently, intentionally set last in create_*_tables(). This bug was found by the PaX size_overflow plugin that detected the arithmetic underflow of 'this_len = env_end - (env_start + src)' when env_end is still zero. The expected consequence is that userland trying to access /proc/<PID>/environ of a not yet fully set up process may get inconsistent data as we're in the middle of copying in the environment variables. Fixes: https://forums.grsecurity.net/viewtopic.php?f=3&t=4363 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116461Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: Pax Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Knut Wohlrab authored
[ Upstream commit 6984ab1a ] A wrong decoding of the touch coordinate message causes a wrong touch ID. Touch ID for dual touch must be 0 or 1. According to the actual Neonode nine byte touch coordinate coding, the state is transported in the lower nibble and the touch ID in the higher nibble of payload byte five. Signed-off-by:
Knut Wohlrab <Knut.Wohlrab@de.bosch.com> Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit aeb6641f ] gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array() call in lpfc_online(), which clearly doesn't look right: drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online': drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] lpfc_destroy_vport_work_array(phba, vports); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not if (vports != NULL) ^~ Looking at the patch that introduced this code, it's clear that the behavior is correct and the indentation is wrong. This fixes the indentation and adds curly braces around the previous if() block for clarity, as that is most likely what caused the code to be misindented in the first place. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 549e55cd ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list") Reviewed-by:
Sebastian Herbszt <herbszt@gmx.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stephen Boyd authored
[ Upstream commit 0f75e1a3 ] The offset seems to have been copied from the sata clk. Fix it so that enabling the crypto engine source clk works. Tested-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 5f775498 ("clk: qcom: Fully support apq8064 global clock control") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit ec7957a6 ] Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c "clk: vexpress: Add separate SP810 driver" Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 732d6913 ] This patch corrects the enable register offset which is actually 0x36cc instead of 0x36c4 Signed-off-by:
-
Shawn Lin authored
[ Upstream commit 2467b674 ] Add free memeory if rockchip_clk_register_branch fails. Fixes: a245fecb ("clk: rockchip: add basic infrastructure...") Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Dan Streetman authored
[ Upstream commit da6ccaaa ] Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit f719e375 ] Jiri Bohac is reporting for a problem where the attempt to reschedule existing connection to another real server needs proper redirect for the conntrack used by the IPVS connection. For example, when IPVS connection is created to NAT-ed real server we alter the reply direction of conntrack. If we later decide to select different real server we can not alter again the conntrack. And if we expire the old connection, the new connection is left without conntrack. So, the only way to redirect both the IPVS connection and the Netfilter's conntrack is to drop the SYN packet that hits existing connection, to wait for the next jiffie to expire the old connection and its conntrack and to rely on client's retransmission to create new connection as usually. Jiri Bohac provided a fix that drops all SYNs on rescheduling, I extended his patch to do such drops only for connections that use conntrack. Here is the original report from Jiri Bohac: Since commit dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead"), new connections to dead servers are redistributed immediately to new servers. The old connection is expired using ip_vs_conn_expire_now() which sets the connection timer to expire immediately. However, before the timer callback, ip_vs_conn_expire(), is run to clean the connection's conntrack entry, the new redistributed connection may already be established and its conntrack removed instead. Fix this by dropping the first packet of the new connection instead, like we do when the destination server is not available. The timer will have deleted the old conntrack entry long before the first packet of the new connection is retransmitted. Fixes: dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead") Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Marco Angaroni authored
[ Upstream commit 7617a24f ] The IPVS SIP persistence engine is not able to parse the SIP header "Call-ID" when such header is inserted in the first positions of the SIP message. When IPVS is configured with "--pe sip" option, like for example: ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o some particular messages (see below for details) do not create entries in the connection template table, which can be listed with: ipvsadm -Lcn --persistent-conn Problematic SIP messages are SIP responses having "Call-ID" header positioned just after message first line: SIP/2.0 200 OK [Call-ID header here] [rest of the headers] When "Call-ID" header is positioned down (after a few other headers) it is correctly recognized. This is due to the data offset used in get_callid function call inside ip_vs_pe_sip.c file: since dptr already points to the start of the SIP message, the value of dataoff should be initially 0. Otherwise the header is searched starting from some bytes after the first character of the SIP message. Fixes: 758ff033 ("IPVS: sip persistence engine") Signed-off-by:
Marco Angaroni <marcoangaroni@gmail.com> Acked-by:
-
Arnd Bergmann authored
[ Upstream commit 3deb9438 ] gcc-6 found a dubious indentation in the megasas_mgmt_fw_ioctl function: drivers/scsi/megaraid/megaraid_sas_base.c: In function 'megasas_mgmt_fw_ioctl': drivers/scsi/megaraid/megaraid_sas_base.c:6658:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] kbuff_arr[i] = NULL; ^~~~~~~~~ drivers/scsi/megaraid/megaraid_sas_base.c:6653:3: note: ...this 'if' clause, but it is not if (kbuff_arr[i]) ^~ The code is actually correct, as there is no downside in clearing a NULL pointer again. This clarifies the code and avoids the warning by adding extra curly braces. Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit a6ab1e81 ] sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer set. In this case it aborts the queuing of the upcall. However it has already taken a new counted reference on "h" and doesn't "put" it, even though it frees the data structure holding the reference. So let's delay the "cache_get" until we know we need it. Fixes: f9e1aedc ("sunrpc/cache: remove races with queuing an upcall.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Guo-Fu Tseng authored
[ Upstream commit 81422e67 ] According to Documentation/power/devices.txt The driver should not use device_set_wakeup_enable() which is the policy for user to decide. Using device_init_wakeup() to initialize dev->power.should_wakeup and dev->power.can_wakeup on driver initialization. And use device_may_wakeup() on suspend to decide if WoL function should be enabled on NIC. Reported-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guo-Fu Tseng authored
[ Upstream commit 0772a99b ] Otherwise it might be back on resume right after going to suspend in some hardware. Reported-by:
-
Pali Rohár authored
[ Upstream commit 98f42221 ] Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit f594bae0 ] I'm surprised this remained undocumented since at least 2011. And it is actually a very useful switch, as Steve and I came to realize recently. Add the text from 2cba3ffb ("perf stat: Add -d -d and -d -d -d options to show more CPU events") which added the incrementing aspect to -d. Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Marcin Ślusarz authored
[ Upstream commit 89fee59b ] Steam frequently puts game binaries in folders with spaces. Note: "(deleted)" markers are now treated as part of the file name. Signed-off-by:
Marcin Ślusarz <marcin.slusarz@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Fixes: 60648033 ("perf tools: Use sscanf for parsing /proc/pid/maps") Link: http://lkml.kernel.org/r/20160119190303.GA17579@marcin-Inspiron-7720Signed-off-by:
-
Eryu Guan authored
[ Upstream commit 5e1021f2 ] ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is ignored in the following "if" condition and ext4_expand_extra_isize() might be called with NULL iloc.bh set, which triggers NULL pointer dereference. This is uncovered by commit 8b4953e1 ("ext4: reserve code points for the project quota feature"), which enlarges the ext4_inode size, and run the following script on new kernel but with old mke2fs: #/bin/bash mnt=/mnt/ext4 devname=ext4-error dev=/dev/mapper/$devname fsimg=/home/fs.img trap cleanup 0 1 2 3 9 15 cleanup() { umount $mnt >/dev/null 2>&1 dmsetup remove $devname losetup -d $backend_dev rm -f $fsimg exit 0 } rm -f $fsimg fallocate -l 1g $fsimg backend_dev=`losetup -f --show $fsimg` devsize=`blockdev --getsz $backend_dev` good_tab="0 $devsize linear $backend_dev 0" error_tab="0 $devsize error $backend_dev 0" dmsetup create $devname --table "$good_tab" mkfs -t ext4 $dev mount -t ext4 -o errors=continue,strictatime $dev $mnt dmsetup load $devname --table "$error_tab" && dmsetup resume $devname echo 3 > /proc/sys/vm/drop_caches ls -l $mnt exit 0 [ Patch changed to simplify the function a tiny bit. -- Ted ] Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Karol Herbst authored
[ Upstream commit cfa52c0c ] Because Linux might use bigger pages than the 4K pages to handle those mmio ioremaps, the kmmio code shouldn't rely on the pade id as it currently does. Using the memory address instead of the page id lets us look up how big the page is and what its base address is, so that we won't get a page fault within the same page twice anymore. Tested-by:
Pierre Moreau <pierre.morrow@free.fr> Signed-off-by:
Karol Herbst <nouveau@karolherbst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Cc: linux-x86_64@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: pq@iki.fi Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1456966991-6861-1-git-send-email-nouveau@karolherbst.deSigned-off-by:
-
Michael Hennerich authored
[ Upstream commit f3df53e4 ] Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit fb166ba1 ] The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions but driver checked only for value of 0. This could lead to a cast of -EINVAL to an unsigned int used as a interrupt number for devm_request_threaded_irq(). Although this is not yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but might be a misleading when diagnosing errors. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 6f1c1e71 ("mfd: max77686: Convert to use regmap_irq") Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 8c09b9fd ] We call spin_lock_irqrestore with "flags" set to zero instead of to the value from spin_lock_irqsave(). Fixes: aaaf5fbf ('rtc: add driver for DS1685 family of real time clocks') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit a25f4a95 ] drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c15 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Alexander Kochetkov authored
[ Upstream commit d5861262 ] Year field must be in BCD format, according to hym8563 datasheet. Due to the bug year 2016 became 2010. Fixes: dcaf0384 ("rtc: add hym8563 rtc-driver") Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 50e6315d ] Commit 985087db 'misc: add support for bmp18x chips to the bmp085 driver' changed the BMP085 config symbol to a boolean. I see no reason why the shared code cannot be built as a module, so change it back to tristate. Fixes: 985087db ("misc: add support for bmp18x chips to the bmp085 driver") Cc: Eric Andersson <eric.andersson@unixphere.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Acked-by:
-
Sushaanth Srirangapathi authored
[ Upstream commit 713fced8 ] Commit 028cd86b ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") fixes polarities of HSYNC/VSYNC pulse but forgot to update known_lcd_panels[] which had sync values according to old logic. This breaks LCD at least on DA850 EVM. This patch fixes this issue and I have tested this for panel "Sharp_LK043T1DG01" using DA850 EVM board. Fixes: 028cd86b ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") Signed-off-by:
Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit dec63a4d ] gcc-6.0 found an ancient bug in the paride driver, which had a "module_param(verbose, bool, 0);" since before 2.6.12, but actually uses it to accept '0', '1' or '2' as arguments: drivers/block/paride/pd.c: In function 'pd_init_dev_parms': drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare] #define DBMSG(msg) ((verbose>1)?(msg):NULL) In 2012, Rusty did a cleanup patch that also changed the type of the variable to 'bool', which introduced what is now a gcc warning. This changes the type back to 'int' and adapts the module_param() line instead, so it should work as documented in case anyone ever cares about running the ancient driver with debugging. Fixes: 90ab5ee9 ("module_param: make bool parameters really bool (drivers & misc)") Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit e07ff943 ] The s5m8767_pmic_probe() function calls s5m8767_get_register() to read data without checking the return code, which produces a compile-time warning when that data is accessed: drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe': drivers/regulator/s5m8767.c:924:7: error: 'enable_reg' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/regulator/s5m8767.c:944:30: error: 'enable_val' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the s5m8767_get_register() function to return a -EINVAL not just for an invalid register number but also for an invalid regulator number, as both would result in returning uninitialized data. The s5m8767_pmic_probe() function is then changed accordingly to fail on a read error, as all the other callers of s5m8767_get_register() already do. In practice this probably cannot happen, as we don't call s5m8767_get_register() with invalid arguments, but the gcc warning seems valid in principle, in terms writing safe error checking. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Huibin Hong authored
[ Upstream commit b920cc31 ] Rockchip_spi_set_cs could be called by spi_setup, but spi_setup may be called by device driver after runtime suspend. Then the spi clock is closed, rockchip_spi_set_cs may access the spi registers, which causes cpu block in some socs. Fixes: 64e36824 ("spi/rockchip: add driver for Rockchip RK3xxx") Signed-off-by:
Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by:
-
Ignat Korchagin authored
[ Upstream commit b348d7dd ] Fix potential out-of-bounds write to urb->transfer_buffer usbip handles network communication directly in the kernel. When receiving a packet from its peer, usbip code parses headers according to protocol. As part of this parsing urb->actual_length is filled. Since the input for urb->actual_length comes from the network, it should be treated as untrusted. Any entity controlling the network may put any value in the input and the preallocated urb->transfer_buffer may not be large enough to hold the data. Thus, the malicious entity is able to write arbitrary data to kernel memory. Signed-off-by:
Ignat Korchagin <ignat.korchagin@gmail.com> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit 8bb5ef79 ] There are three subsystem callbacks in css shutdown path - css_offline(), css_released() and css_free(). Except for css_released(), cgroup core didn't guarantee the order of invocation. css_offline() or css_free() could be called on a parent css before its children. This behavior is unexpected and led to bugs in cpu and memory controller. The previous patch updated ordering for css_offline() which fixes the cpu controller issue. While there currently isn't a known bug caused by misordering of css_free() invocations, let's fix it too for consistency. css_free() ordering can be trivially fixed by moving putting of the parent css below css_free() invocation. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 9c6672ac ] Commit 6d80dba1 ("efi: Provide a non-blocking SetVariable() operation") implemented a non-blocking alternative for the UEFI SetVariable() invocation performed by efivars, since it may occur in atomic context. However, this version of the function was never exposed via the efivars struct, so the non-blocking versions was not actually callable. Fix that. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 6d80dba1 ("efi: Provide a non-blocking SetVariable() operation") Link: http://lkml.kernel.org/r/1454364428-494-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
-
Lars-Peter Clausen authored
[ Upstream commit 712a8038 ] When the ssm4567 is powered up the driver calles regcache_sync() to restore the register map content. regcache_sync() assumes that the device is in its power-on reset state. Make sure that this is the case by explicitly resetting the ssm4567 register map before calling regcache_sync() otherwise we might end up with a incorrect register map which leads to undefined behaviour. One such undefined behaviour was observed when returning from system suspend while a playback stream is active, in that case the ssm4567 was kept muted after resume. Fixes: 1ee44ce0 ("ASoC: ssm4567: Add driver for Analog Devices SSM4567 amplifier") Reported-by:
Harsha Priya <harshapriya.n@intel.com> Tested-by:
Fang, Yang A <yang.a.fang@intel.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit ba4bc32e ] An older patch to convert the API in the s3c i2s driver ended up passing a const pointer into a function that takes a non-const pointer, so we now get a warning: sound/soc/samsung/s3c2412-i2s.c: In function 's3c2412_iis_dev_probe': sound/soc/samsung/s3c2412-i2s.c:172:9: error: passing argument 3 of 's3c_i2sv2_register_component' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] However, the s3c_i2sv2_register_component() function again passes the pointer into another function taking a const, so we just need to change its prototype. Fixes: eca3b01d ("ASoC: switch over to use snd_soc_register_component() on s3c i2s") Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit 10ff4c52 ] The exynos5 I2C controller driver always prepares and enables a clock before using it and then disables unprepares it when the clock is not used anymore. But this can cause a possible ABBA deadlock in some scenarios since a driver that uses regmap to access its I2C registers, will first grab the regmap lock and then the I2C xfer function will grab the prepare lock when preparing the I2C clock. But since the clock driver also uses regmap for I2C accesses, preparing a clock will first grab the prepare lock and then the regmap lock when using the regmap API. An example of this happens on the Exynos5422 Odroid XU4 board where a s2mps11 PMIC is used and both the s2mps11 regulators and clk drivers share the same I2C regmap. The possible deadlock is reported by the kernel lockdep: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sec_core:428:(regmap)->lock); lock(prepare_lock); lock(sec_core:428:(regmap)->lock); lock(prepare_lock); *** DEADLOCK *** Fix it by leaving the code prepared on probe and use {en,dis}able in the I2C transfer function. This patch is similar to commit 34e81ad5 ("i2c: s3c2410: fix ABBA deadlock by keeping clock prepared") that fixes the same bug in other driver for an I2C controller found in Samsung SoCs. Reported-by:
Anand Moon <linux.amoon@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
