1. 03 Dec, 2018 1 commit
  2. 30 Nov, 2018 6 commits
    • Jens Axboe's avatar
      Merge branch 'nvme-4.20' of git://git.infradead.org/nvme into for-linus · 1c9b357c
      Jens Axboe authored
      Pull NVMe fixes from Christoph:
      
      "Various fixlets all over."
      
      * 'nvme-4.20' of git://git.infradead.org/nvme:
        nvme-rdma: fix double freeing of async event data
        nvme: flush namespace scanning work just before removing namespaces
        nvme: warn when finding multi-port subsystems without multipathing enabled
        nvme-pci: fix surprise removal
        nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request()
        nvme: Free ctrl device name on init failure
      1c9b357c
    • Ming Lei's avatar
      block: fix single range discard merge · 2a5cf35c
      Ming Lei authored
      There are actually two kinds of discard merge:
      
      - one is the normal discard merge, just like normal read/write request,
      and call it single-range discard
      
      - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1
      
      For the former case, queue_max_discard_segments(rq->q) is 1, and we
      should handle this kind of discard merge like the normal read/write
      request.
      
      This patch fixes the following kernel panic issue[1], which is caused by
      not removing the single-range discard request from elevator queue.
      
      Guangwu has one raid discard test case, in which this issue is a bit
      easier to trigger, and I verified that this patch can fix the kernel
      panic issue in Guangwu's test case.
      
      [1] kernel panic log from Jens's report
      
       BUG: unable to handle kernel NULL pointer dereference at 0000000000000148
       PGD 0 P4D 0.
       Oops: 0000 [#1] SMP PTI
       CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \
      4.20.0-rc3-00649-ge64d9a554a91-dirty #14  Hardware name: Wiwynn \
      Leopard-Orv2/Leopard-DDR BW, BIOS LBM08   03/03/2017       Workqueue: kblockd \
      blk_mq_run_work_fn                                            RIP: \
      0010:blk_mq_get_driver_tag+0x81/0x120                                       Code: 24 \
      10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \
      0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \
      f6 87 b0 00 00 00 02  RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246                     \
        RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8
       RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000
       RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000
       R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300
       R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000
       FS:  0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000
       CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
       CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0
       DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
       DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
       Call Trace:
        blk_mq_dispatch_rq_list+0xec/0x480
        ? elv_rb_del+0x11/0x30
        blk_mq_do_dispatch_sched+0x6e/0xf0
        blk_mq_sched_dispatch_requests+0xfa/0x170
        __blk_mq_run_hw_queue+0x5f/0xe0
        process_one_work+0x154/0x350
        worker_thread+0x46/0x3c0
        kthread+0xf5/0x130
        ? process_one_work+0x350/0x350
        ? kthread_destroy_worker+0x50/0x50
        ret_from_fork+0x1f/0x30
       Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \
      kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \
      cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \
      button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \
      nvme_core fuse sg loop efivarfs autofs4  CR2: 0000000000000148                        \
      
       ---[ end trace 340a1fb996df1b9b ]---
       RIP: 0010:blk_mq_get_driver_tag+0x81/0x120
       Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \
      00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \
      20 72 37 f6 87 b0 00 00 00 02
      
      Fixes: 445251d0 ("blk-mq: fix discard merge with scheduler attached")
      Reported-by: default avatarJens Axboe <axboe@kernel.dk>
      Cc: Guangwu Zhang <guazhang@redhat.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      2a5cf35c
    • Prabhath Sajeepa's avatar
      nvme-rdma: fix double freeing of async event data · 6344d02d
      Prabhath Sajeepa authored
      Some error paths in configuration of admin queue free data buffer
      associated with async request SQE without resetting the data buffer
      pointer to NULL, This buffer is also freed up again if the controller
      is shutdown or reset.
      Signed-off-by: default avatarPrabhath Sajeepa <psajeepa@purestorage.com>
      Reviewed-by: default avatarRoland Dreier <roland@purestorage.com>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      6344d02d
    • Sagi Grimberg's avatar
      nvme: flush namespace scanning work just before removing namespaces · f6c8e432
      Sagi Grimberg authored
      nvme_stop_ctrl can be called also for reset flow and there is no need to
      flush the scan_work as namespaces are not being removed. This can cause
      deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
      before controller teardown (and specifically I/O cancellation of the
      scan_work itself) takes place, but the scan_work will be blocked anyways
      so there is no need to flush it.
      
      Instead, move scan_work flush to nvme_remove_namespaces() where it really
      needs to flush.
      Reported-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      Reviewed-by: default avatarKeith Busch <keith.busch@intel.com>
      Reviewed by: James Smart <jsmart2021@gmail.com>
      Tested-by: default avatarEwan D. Milne <emilne@redhat.com>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      f6c8e432
    • Christoph Hellwig's avatar
      nvme: warn when finding multi-port subsystems without multipathing enabled · 14a1336e
      Christoph Hellwig authored
      Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might
      show up as invididual devices and cause problems, warn about it.
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
      14a1336e
    • Maximilian Heyne's avatar
      fs: fix lost error code in dio_complete · 41e817bc
      Maximilian Heyne authored
      commit e2592217 ("fs: simplify the
      generic_write_sync prototype") reworked callers of generic_write_sync(),
      and ended up dropping the error return for the directio path. Prior to
      that commit, in dio_complete(), an error would be bubbled up the stack,
      but after that commit, errors passed on to dio_complete were eaten up.
      
      This was reported on the list earlier, and a fix was proposed in
      https://lore.kernel.org/lkml/20160921141539.GA17898@infradead.org/, but
      never followed up with.  We recently hit this bug in our testing where
      fencing io errors, which were previously erroring out with EIO, were
      being returned as success operations after this commit.
      
      The fix proposed on the list earlier was a little short -- it would have
      still called generic_write_sync() in case `ret` already contained an
      error. This fix ensures generic_write_sync() is only called when there's
      no pending error in the write. Additionally, transferred is replaced
      with ret to bring this code in line with other callers.
      
      Fixes: e2592217 ("fs: simplify the generic_write_sync prototype")
      Reported-by: default avatarRavi Nankani <rnankani@amazon.com>
      Signed-off-by: default avatarMaximilian Heyne <mheyne@amazon.de>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      CC: Torsten Mehlan <tomeh@amazon.de>
      CC: Uwe Dannowski <uwed@amazon.de>
      CC: Amit Shah <aams@amazon.de>
      CC: David Woodhouse <dwmw@amazon.co.uk>
      CC: stable@vger.kernel.org
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      41e817bc
  3. 27 Nov, 2018 3 commits
    • Igor Konopko's avatar
      nvme-pci: fix surprise removal · 751a0cc0
      Igor Konopko authored
      When a PCIe NVMe device is not present, nvme_dev_remove_admin() calls
      blk_cleanup_queue() on the admin queue, which frees the hctx for that
      queue.  Moments later, on the same path nvme_kill_queues() calls
      blk_mq_unquiesce_queue() on admin queue and tries to access hctx of it,
      which leads to following OOPS:
      
      Oops: 0000 [#1] SMP PTI
      RIP: 0010:sbitmap_any_bit_set+0xb/0x40
      Call Trace:
       blk_mq_run_hw_queue+0xd5/0x150
       blk_mq_run_hw_queues+0x3a/0x50
       nvme_kill_queues+0x26/0x50
       nvme_remove_namespaces+0xb2/0xc0
       nvme_remove+0x60/0x140
       pci_device_remove+0x3b/0xb0
      
      Fixes: cb4bfda6 ("nvme-pci: fix hot removal during error handling")
      Signed-off-by: default avatarIgor Konopko <igor.j.konopko@intel.com>
      Reviewed-by: default avatarKeith Busch <keith.busch@intel.com>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      751a0cc0
    • Ewan D. Milne's avatar
      nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request() · dfa74422
      Ewan D. Milne authored
      __nvme_fc_init_request() invokes memset() on the nvme_fcp_op_w_sgl structure, which
      NULLed-out the nvme_req(req)->ctrl field previously set by nvme_fc_init_request().
      This apparently was not referenced until commit faf4a44fff ("nvme: support traffic
      based keep-alive") which now results in a crash in nvme_complete_rq():
      
      [ 8386.897130] RIP: 0010:panic+0x220/0x26c
      [ 8386.901406] Code: 83 3d 6f ee 72 01 00 74 05 e8 e8 54 02 00 48 c7 c6 40 fd 5b b4 48 c7 c7 d8 8d c6 b3 31e
      [ 8386.922359] RSP: 0018:ffff99650019fc40 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
      [ 8386.930804] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000006
      [ 8386.938764] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8e325f8168b0
      [ 8386.946725] RBP: ffff99650019fcb0 R08: 0000000000000000 R09: 00000000000004f8
      [ 8386.954687] R10: 0000000000000000 R11: ffff99650019f9b8 R12: ffffffffb3c55f3c
      [ 8386.962648] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
      [ 8386.970613]  oops_end+0xd1/0xe0
      [ 8386.974116]  no_context+0x1b2/0x3c0
      [ 8386.978006]  do_page_fault+0x32/0x140
      [ 8386.982090]  page_fault+0x1e/0x30
      [ 8386.985786] RIP: 0010:nvme_complete_rq+0x65/0x1d0 [nvme_core]
      [ 8386.992195] Code: 41 bc 03 00 00 00 74 16 0f 86 c3 00 00 00 66 3d 83 00 41 bc 06 00 00 00 0f 85 e7 00 000
      [ 8387.013147] RSP: 0018:ffff99650019fe18 EFLAGS: 00010246
      [ 8387.018973] RAX: 0000000000000000 RBX: ffff8e322ae51280 RCX: 0000000000000001
      [ 8387.026935] RDX: 0000000000000400 RSI: 0000000000000001 RDI: ffff8e322ae51280
      [ 8387.034897] RBP: ffff8e322ae51280 R08: 0000000000000000 R09: ffffffffb2f0b890
      [ 8387.042859] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
      [ 8387.050821] R13: 0000000000000100 R14: 0000000000000004 R15: ffff8e2b0446d990
      [ 8387.058782]  ? swiotlb_unmap_page+0x40/0x40
      [ 8387.063448]  nvme_fc_complete_rq+0x2d/0x70 [nvme_fc]
      [ 8387.068986]  blk_done_softirq+0xa1/0xd0
      [ 8387.073264]  __do_softirq+0xd6/0x2a9
      [ 8387.077251]  run_ksoftirqd+0x26/0x40
      [ 8387.081238]  smpboot_thread_fn+0x10e/0x160
      [ 8387.085807]  kthread+0xf8/0x130
      [ 8387.089309]  ? sort_range+0x20/0x20
      [ 8387.093198]  ? kthread_stop+0x110/0x110
      [ 8387.097475]  ret_from_fork+0x35/0x40
      [ 8387.101462] ---[ end trace 7106b0adf5e422f8 ]---
      
      Fixes: faf4a44fff ("nvme: support traffic based keep-alive")
      Signed-off-by: default avatarEwan D. Milne <emilne@redhat.com>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      dfa74422
    • Keith Busch's avatar
      nvme: Free ctrl device name on init failure · d6a2b953
      Keith Busch authored
      Free the kobject name that was allocated for the controller device on
      failure rather than its parent.
      
      Fixes: d22524a4 ("nvme: switch controller refcounting to use struct device")
      Signed-off-by: default avatarKeith Busch <keith.busch@intel.com>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      d6a2b953
  4. 21 Nov, 2018 1 commit
  5. 15 Nov, 2018 1 commit
    • James Smart's avatar
      nvme-fc: resolve io failures during connect · 4cff280a
      James Smart authored
      If an io error occurs on an io issued while connecting, recovery
      of the io falls flat as the state checking ends up nooping the error
      handler.
      
      Create an err_work work item that is scheduled upon an io error while
      connecting. The work thread terminates all io on all queues and marks
      the queues as not connected.  The termination of the io will return
      back to the callee, which will then back out of the connection attempt
      and will reschedule, if possible, the connection attempt.
      
      The changes:
      - in case there are several commands hitting the error handler, a
        state flag is kept so that the error work is only scheduled once,
        on the first error. The subsequent errors can be ignored.
      - The calling sequence to stop keep alive and terminate the queues
        and their io is lifted from the reset routine. Made a small
        service routine used by both reset and err_work.
      - During debugging, found that the teardown path can reference
        an uninitialized pointer, resulting in a NULL pointer oops.
        The aen_ops weren't initialized yet. Add validation on their
        initialization before calling the teardown routine.
      Signed-off-by: default avatarJames Smart <jsmart2021@gmail.com>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      4cff280a
  6. 14 Nov, 2018 2 commits
    • Ming Lei's avatar
      SCSI: fix queue cleanup race before queue initialization is done · 8dc765d4
      Ming Lei authored
      c2856ae2 ("blk-mq: quiesce queue before freeing queue") has
      already fixed this race, however the implied synchronize_rcu()
      in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
      performance regression.
      
      Then 1311326c ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
      tried to quiesce queue for avoiding unnecessary synchronize_rcu()
      only when queue initialization is done, because it is usual to see
      lots of inexistent LUNs which need to be probed.
      
      However, turns out it isn't safe to quiesce queue only when queue
      initialization is done. Because when one SCSI command is completed,
      the user of sending command can be waken up immediately, then the
      scsi device may be removed, meantime the run queue in scsi_end_request()
      is still in-progress, so kernel panic can be caused.
      
      In Red Hat QE lab, there are several reports about this kind of kernel
      panic triggered during kernel booting.
      
      This patch tries to address the issue by grabing one queue usage
      counter during freeing one request and the following run queue.
      
      Fixes: 1311326c ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
      Cc: Andrew Jones <drjones@redhat.com>
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: linux-scsi@vger.kernel.org
      Cc: Martin K. Petersen <martin.petersen@oracle.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
      Cc: stable <stable@vger.kernel.org>
      Cc: jianchao.wang <jianchao.w.wang@oracle.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      8dc765d4
    • Dave Chinner's avatar
      block: fix 32 bit overflow in __blkdev_issue_discard() · 4800bf7b
      Dave Chinner authored
      A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to
      fall into an endless loop in the discard code. The test is creating
      a device that is exactly 2^32 sectors in size to test mkfs boundary
      conditions around the 32 bit sector overflow region.
      
      mkfs issues a discard for the entire device size by default, and
      hence this throws a sector count of 2^32 into
      blkdev_issue_discard(). It takes the number of sectors to discard as
      a sector_t - a 64 bit value.
      
      The commit ba5d7385 ("block: cleanup __blkdev_issue_discard")
      takes this sector count and casts it to a 32 bit value before
      comapring it against the maximum allowed discard size the device
      has. This truncates away the upper 32 bits, and so if the lower 32
      bits of the sector count is zero, it starts issuing discards of
      length 0. This causes the code to fall into an endless loop, issuing
      a zero length discards over and over again on the same sector.
      
      Fixes: ba5d7385 ("block: cleanup __blkdev_issue_discard")
      Tested-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Reviewed-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
      
      Killed pointless WARN_ON().
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      4800bf7b
  7. 12 Nov, 2018 3 commits
  8. 10 Nov, 2018 1 commit
    • Jens Axboe's avatar
      floppy: fix race condition in __floppy_read_block_0() · de7b75d8
      Jens Axboe authored
      LKP recently reported a hang at bootup in the floppy code:
      
      [  245.678853] INFO: task mount:580 blocked for more than 120 seconds.
      [  245.679906]       Tainted: G                T 4.19.0-rc6-00172-ga9f38e1d #1
      [  245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [  245.682181] mount           D 6372   580      1 0x00000004
      [  245.683023] Call Trace:
      [  245.683425]  __schedule+0x2df/0x570
      [  245.683975]  schedule+0x2d/0x80
      [  245.684476]  schedule_timeout+0x19d/0x330
      [  245.685090]  ? wait_for_common+0xa5/0x170
      [  245.685735]  wait_for_common+0xac/0x170
      [  245.686339]  ? do_sched_yield+0x90/0x90
      [  245.686935]  wait_for_completion+0x12/0x20
      [  245.687571]  __floppy_read_block_0+0xfb/0x150
      [  245.688244]  ? floppy_resume+0x40/0x40
      [  245.688844]  floppy_revalidate+0x20f/0x240
      [  245.689486]  check_disk_change+0x43/0x60
      [  245.690087]  floppy_open+0x1ea/0x360
      [  245.690653]  __blkdev_get+0xb4/0x4d0
      [  245.691212]  ? blkdev_get+0x1db/0x370
      [  245.691777]  blkdev_get+0x1f3/0x370
      [  245.692351]  ? path_put+0x15/0x20
      [  245.692871]  ? lookup_bdev+0x4b/0x90
      [  245.693539]  blkdev_get_by_path+0x3d/0x80
      [  245.694165]  mount_bdev+0x2a/0x190
      [  245.694695]  squashfs_mount+0x10/0x20
      [  245.695271]  ? squashfs_alloc_inode+0x30/0x30
      [  245.695960]  mount_fs+0xf/0x90
      [  245.696451]  vfs_kern_mount+0x43/0x130
      [  245.697036]  do_mount+0x187/0xc40
      [  245.697563]  ? memdup_user+0x28/0x50
      [  245.698124]  ksys_mount+0x60/0xc0
      [  245.698639]  sys_mount+0x19/0x20
      [  245.699167]  do_int80_syscall_32+0x61/0x130
      [  245.699813]  entry_INT80_32+0xc7/0xc7
      
      showing that we never complete that read request. The reason is that
      the completion setup is racy - it initializes the completion event
      AFTER submitting the IO, which means that the IO could complete
      before/during the init. If it does, we are passing garbage to
      complete() and we may sleep forever waiting for the event to
      occur.
      
      Fixes: 7b7b68bb ("floppy: bail out in open() if drive is not responding to block0 read")
      Reviewed-by: default avatarOmar Sandoval <osandov@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      de7b75d8
  9. 09 Nov, 2018 10 commits
  10. 08 Nov, 2018 12 commits