- 13 Nov, 2018 37 commits
-
-
Wolfram Sang authored
[ Upstream commit 31d86033 ] DMA needs to be cleaned up not only on timeout, but on all errors where it has been setup before. Fixes: 73e8b052 ("i2c: rcar: add DMA support") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu authored
[ Upstream commit ba0e41ca ] Add a testcase to check the syntax and field types for synthetic_events interface. Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devboxAcked-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 8c3bf9b6 ] Clang currently warns: drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift result (0xF00000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data)); ~~~~~~~~~~~~~~ ^ ~~ 1 warning generated. The warning is certainly accurate since ISP_NVRAM_MASK is defined as (0x000F << 16) which is then shifted by 16, resulting in 64424509440, well above UINT_MAX. Given that this is the only location in this driver where ISP_NVRAM_MASK is shifted again, it seems likely that ISP_NVRAM_MASK was originally defined without a shift and during the move of the shift to the definition, this statement wasn't properly removed (since ISP_NVRAM_MASK is used in the statenent right above this). Only the maintainers can confirm this since this statment has been here since the driver was first added to the kernel. Link: https://github.com/ClangBuiltLinux/linux/issues/127Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 6aa67676 ] Commit: c5bedc68 ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active") introduced the 'fpu' variable at top of __restore_xstate_sig(), which now shadows the other definition: arch/x86/kernel/fpu/signal.c:318:28: warning: symbol 'fpu' shadows an earlier one arch/x86/kernel/fpu/signal.c:271:20: originally declared here Remove the shadowed definition of 'fpu', as the two definitions are the same. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c5bedc68 ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active") Link: http://lkml.kernel.org/r/20181016202525.29437-3-bigeasy@linutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
David Miller authored
[ Upstream commit 0ed149cf ] The size of the resulting cpu map can be smaller than a multiple of sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event will not be aligned properly. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit 36b8d462 ] When a build is run from something like a cron job, the user's $PATH is rather minimal, of note, not including /usr/sbin in my own case. Because of that, an automated rpm package build ultimately fails to find libperf-jvmti.so, because somewhere within the build, this happens... /bin/sh: alternatives: command not found /bin/sh: alternatives: command not found Makefile.config:849: No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel ...and while the build continues, libperf-jvmti.so isn't built, and things fall down when rpm tries to find all the %files specified. Exact same system builds everything just fine when the job is launched from a login shell instead of a cron job, since alternatives is in $PATH, so openjdk is actually found. The test required to get into this section of code actually specifies the full path, as does a block just above it, so let's do that here too. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: William Cohen <wcohen@redhat.com> Fixes: d4dfdf00 ("perf jvmti: Plug compilation into perf build") Link: http://lkml.kernel.org/r/20180906221812.11167-1-jarod@redhat.comSigned-off-by:
-
Song Muchun authored
[ Upstream commit 9845c49c ] The comment and the code around the update_min_vruntime() call in dequeue_entity() are not in agreement. >From commit: b60205c7 ("sched/fair: Fix min_vruntime tracking") I think that we want to update min_vruntime when a task is sleeping/migrating. So, the check is inverted there - fix it. Signed-off-by:
Song Muchun <smuchun@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b60205c7 ("sched/fair: Fix min_vruntime tracking") Link: http://lkml.kernel.org/r/20181014112612.2614-1-smuchun@gmail.comSigned-off-by:
-
David S. Miller authored
[ Upstream commit b3e1eb8e ] So that when it is unset, ie. '-1', userspace can see it properly. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 455adb31 ] Like x86 and arm, call perf_sample_event_took() in perf event NMI interrupt handler. Signed-off-by:
-
David S. Miller authored
[ Upstream commit cfdc3170 ] It is important to clear the hw->state value for non-stopped events when they are added into the PMU. Otherwise when the event is scheduled out, we won't read the counter because HES_UPTODATE is still set. This breaks 'perf stat' and similar use cases, causing all the events to show zero. This worked for multi-pcr because we make explicit sparc_pmu_start() calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do this because the idea there is to accumulate all of the counter settings into the single pcr value. So we have to add explicit hw->state handling there. Like x86, we use the PERF_HES_ARCH bit to track truly stopped events so that we don't accidently start them on a reload. Related to all of this, sparc_pmu_start() is missing a userpage update so add it. Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 94aafb74 ] Michael reported that he could not stat following event: $ perf stat -e unc_p_freq_ge_1200mhz_cycles -a -- ls event syntax error: '..e_1200mhz_cycles' \___ value too big for format, maximum is 255 Run 'perf list' for a list of valid events The event is unwrapped into: uncore_pcu/event=0xb,filter_band0=1200/ where filter_band0 format says it's one byte only: # cat uncore_pcu/format/filter_band0 config1:0-7 while JSON files specifies bigger number: "Filter": "filter_band0=1200", all the filter_band* formats show 1 byte width: # cat uncore_pcu/format/filter_band1 config1:8-15 # cat uncore_pcu/format/filter_band2 config1:16-23 # cat uncore_pcu/format/filter_band3 config1:24-31 The reason of the issue is that filter_band* values are supposed to be in 100Mhz units.. it's stated in the JSON help for the events, like: filter_band3=XXX, with XXX in 100Mhz units This patch divides the filter_band* values by 100, plus there's couple of changes that actually change the number completely, like: - "Filter": "edge=1,filter_band2=4000", + "Filter": "edge=1,filter_band2=30", Reported-by:
Michael Petlan <mpetlan@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181010080339.GB15790@kravaSigned-off-by:
-
Florian Westphal authored
[ Upstream commit 9dffff20 ] bydst table/list lookups use rcu, so insertions must use rcu versions. Fixes: a7c44247 ("xfrm: policy: make xfrm_policy_lookup_bytype lockless") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 1b9caa10 ] This reverts commit ac0e2cd5. Michael reported an issue with oversized terms values assignment and I noticed there was actually a misunderstanding of the max value check in the past. The above commit's changelog says: If bit 21 is set, there is parsing issues as below. $ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/ event syntax error: '..pi_0/event=0x200002,umask=0x8/' \___ value too big for format, maximum is 511 But there's no issue there, because the event value is distributed along the value defined by the format. Even if the format defines separated bit, the value is treated as a continual number, which should follow the format definition. In above case it's 9-bit value with last bit separated: $ cat uncore_qpi_0/format/event config:0-7,21 Hence the value 0x200002 is correctly reported as format violation, because it exceeds 9 bits. It should have been 0x102 instead, which sets the 9th bit - the bit 21 of the format. $ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/ Using CPUID GenuineIntel-6-2D ... ------------------------------------------------------------ perf_event_attr: type 10 size 112 config 0x200802 sample_type IDENTIFIER ... Reported-by:
-
Eric Dumazet authored
[ Upstream commit 262f9d81 ] If the current process has unlimited RLIMIT_MEMLOCK, we should should leave it as is. Fixes: 941ff6f1 ("bpf: fix rlimit in reuseport net selftest") Signed-off-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Marek Szyprowski authored
commit f5e758b8 upstream. PMIC_IRQB and PMIC_KEYINB lines on Exynos4210-based Origen board have external pull-up resistors, so disable any pull control for those lines in respective pin controller node. This fixes support for MAX8997 interrupts and enables operation of wakeup from MAX8997 RTC alarm. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 17419726 ("ARM: dts: add max8997 device node for exynos4210-origen board") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Sai Praneeth authored
commit 706d5168 upstream. Future Intel processors will support "Enhanced IBRS" which is an "always on" mode i.e. IBRS bit in SPEC_CTRL MSR is enabled once and never disabled. From the specification [1]: "With enhanced IBRS, the predicted targets of indirect branches executed cannot be controlled by software that was executed in a less privileged predictor mode or on another logical processor. As a result, software operating on a processor with enhanced IBRS need not use WRMSR to set IA32_SPEC_CTRL.IBRS after every transition to a more privileged predictor mode. Software can isolate predictor modes effectively simply by setting the bit once. Software need not disable enhanced IBRS prior to entering a sleep state such as MWAIT or HLT." If Enhanced IBRS is supported by the processor then use it as the preferred spectre v2 mitigation mechanism instead of Retpoline. Intel's Retpoline white paper [2] states: "Retpoline is known to be an effective branch target injection (Spectre variant 2) mitigation on Intel processors belonging to family 6 (enumerated by the CPUID instruction) that do not have support for enhanced IBRS. On processors that support enhanced IBRS, it should be used for mitigation instead of retpoline." The reason why Enhanced IBRS is the recommended mitigation on processors which support it is that these processors also support CET which provides a defense against ROP attacks. Retpoline is very similar to ROP techniques and might trigger false positives in the CET defense. If Enhanced IBRS is selected as the mitigation technique for spectre v2, the IBRS bit in SPEC_CTRL MSR is set once at boot time and never cleared. Kernel also has to make sure that IBRS bit remains set after VMEXIT because the guest might have cleared the bit. This is already covered by the existing x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() speculation control functions. Enhanced IBRS still requires IBPB for full mitigation. [1] Speculative-Execution-Side-Channel-Mitigations.pdf [2] Retpoline-A-Branch-Target-Injection-Mitigation.pdf Both documents are available at: https://bugzilla.kernel.org/show_bug.cgi?id=199511Originally-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Tim C Chen <tim.c.chen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Link: https://lkml.kernel.org/r/1533148945-24095-1-git-send-email-sai.praneeth.prakhya@intel.comSigned-off-by:
-
Sebastian Andrzej Siewior authored
commit f77084d9 upstream. The WARN_ON_ONCE(__read_cr3() != build_cr3()) in switch_mm_irqs_off() triggers every once in a while during a snapshotted system upgrade. The warning triggers since commit decab088 ("x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()"). The callchain is: get_page_from_freelist() -> post_alloc_hook() -> __kernel_map_pages() with CONFIG_DEBUG_PAGEALLOC enabled. Disable preemption during CR3 reset / __flush_tlb_all() and add a comment why preemption has to be disabled so it won't be removed accidentaly. Add another preemptible() check in __flush_tlb_all() to catch callers with enabled preemption when PGE is enabled, because PGE enabled does not trigger the warning in __native_flush_tlb(). Suggested by Andy Lutomirski. Fixes: decab088 ("x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()") Signed-off-by:
-
He Zhe authored
x86/corruption-check: Fix panic in memory_corruption_check() when boot option without value is provided commit ccde460b upstream. memory_corruption_check[{_period|_size}]()'s handlers do not check input argument before passing it to kstrtoul() or simple_strtoull(). The argument would be a NULL pointer if each of the kernel parameters, without its value, is set in command line and thus cause the following panic. PANIC: early exception 0xe3 IP 10:ffffffff73587c22 error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #2 [ 0.000000] RIP: 0010:kstrtoull+0x2/0x10 ... [ 0.000000] Call Trace [ 0.000000] ? set_corruption_check+0x21/0x49 [ 0.000000] ? do_early_param+0x4d/0x82 [ 0.000000] ? parse_args+0x212/0x330 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_options+0x20/0x23 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_param+0x2d/0x39 [ 0.000000] ? setup_arch+0x2f7/0xbf4 [ 0.000000] ? start_kernel+0x5e/0x4c2 [ 0.000000] ? load_ucode_bsp+0x113/0x12f [ 0.000000] ? secondary_startup_64+0xa5/0xb0 This patch adds checks to prevent the panic. Signed-off-by:
He Zhe <zhe.he@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: kstewart@linuxfoundation.org Cc: pombredanne@nexb.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1534260823-87917-1-git-send-email-zhe.he@windriver.comSigned-off-by:
-
Juergen Gross authored
commit 357d291c upstream. The boot loader version reported via sysfs is wrong in case of the kernel being booted via the Xen PVH boot entry. it should be 2.12 (0x020c), but it is reported to be 2.18 (0x0212). As the current way to set the version is error prone use the more readable variant (2 << 8) | 12. Signed-off-by:
Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> # 4.12 Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: bp@alien8.de Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181010061456.22238-2-jgross@suse.comSigned-off-by:
-
Jiri Kosina authored
commit 53c613fe upstream. STIBP is a feature provided by certain Intel ucodes / CPUs. This feature (once enabled) prevents cross-hyperthread control of decisions made by indirect branch predictors. Enable this feature if - the CPU is vulnerable to spectre v2 - the CPU supports SMT and has SMT siblings online - spectre_v2 mitigation autoselection is enabled (default) After some previous discussion, this leaves STIBP on all the time, as wrmsr on crossing kernel boundary is a no-no. This could perhaps later be a bit more optimized (like disabling it in NOHZ, experiment with disabling it in idle, etc) if needed. Note that the synchronization of the mask manipulation via newly added spec_ctrl_mutex is currently not strictly needed, as the only updater is already being serialized by cpu_add_remove_lock, but let's make this a little bit more future-proof. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alex Stanoev authored
commit ac237c28 upstream. The Creative Audigy SE (SB0570) card currently exhibits an audible pop whenever playback is stopped or resumed, or during silent periods of an audio stream. Initialise the IZD bit to the 0 to eliminate these pops. The Infinite Zero Detection (IZD) feature on the DAC causes the output to be shunted to Vcap after 2048 samples of silence. This discharges the AC coupling capacitor through the output and causes the aforementioned pop/click noise. The behaviour of the IZD bit is described on page 15 of the WM8768GEDS datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples will cause all outputs to be connected directly to VCAP. This also happens if 2048 consecutive zero input samples are applied to all 6 channels, and IZD=0. It will be removed as soon as any channel receives a non-zero input". I believe the second sentence might be referring to IZD=1 instead of IZD=0 given the observed behaviour of the card. This change should make the DAC initialisation consistent with Creative's Windows driver, as this popping persists when initialising the card in Linux and soft rebooting into Windows, but is not present on a cold boot to Windows. Signed-off-by:
Alex Stanoev <alex@astanoev.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jeremy Cline authored
commit e7bb6ad5 upstream. The Lenovo G50-30, like other G50 models, has a Conexant codec that requires a quirk for its inverted stereo dmic. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1249364Reported-by:
Alexander Ploumistos <alex.ploumistos@gmail.com> Tested-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
-
Hui Wang authored
commit d06fb562 upstream. The front MIC on the Lenovo M715 can't record sound, after applying the ALC294_FIXUP_LENOVO_MIC_LOCATION, the problem is fixed. So add the pin configuration of this machine to the pin quirk table. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit 5b7c5e1f upstream. BIOS on ASUS G751 doesn't seem to map the headphone pin (NID 0x16) correctly. Add a quirk to address it, as well as chaining to the previous fix for the microphone. Reported-by:
Håvard <hovardslill@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 11ba6111 upstream. ASUS G751 requires the extra COEF initialization to make it microphone working properly. Reported-and-tested-by:
-
Helge Deller authored
commit 99a3ae51 upstream. In the C-code we need to put the physical address of the hpmc handler in the interrupt vector table (IVA) in order to get HPMCs working. Since on parisc64 function pointers are indirect (in fact they are function descriptors) we instead export the address as variable and not as function. This reverts a small part of commit f39cce65 ("parisc: Add cfi_startproc and cfi_endproc to assembly code"). Signed-off-by:
Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by:
-
Helge Deller authored
commit 3c229b3f upstream. Fix a long-existing small nasty bug in the map_pages() implementation which leads to overwriting already written pte entries with zero, *if* map_pages() is called a second time with an end address which isn't aligned on a pmd boundry. This happens for example if we want to remap only the text segment read/write in order to run alternative patching on the code. Exiting the loop when we reach the end address fixes this. Cc: stable@vger.kernel.org Signed-off-by:
-
John David Anglin authored
commit 1138b671 upstream. Helge noticed that the address of the os_hpmc handler was not being correctly calculated in the hpmc macro. As a result, PDCE_CHECK would fail to call os_hpmc: <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu2> 37000f7302e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> f600105e02e00000 fffffff0f0c00000 CC_MC_HPMC_MONARCH_SELECTED <Cpu2> 140003b202e00000 000000000000000b CC_ERR_HPMC_STATE_ENTRY <Cpu2> 5600100b02e00000 00000000000001a0 CC_MC_OS_HPMC_LEN_ERR <Cpu2> 5600106402e00000 fffffff0f0438e70 CC_MC_BR_TO_OS_HPMC_FAILED <Cpu2> e800009802e00000 0000000000000000 CC_ERR_CHECK_HPMC <Cpu2> 37000f7302e00000 8040004000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> 4000109f02e00000 0000000000000000 CC_MC_HPMC_INITIATED <Cpu2> 4000101902e00000 0000000000000000 CC_MC_MULTIPLE_HPMCS <Cpu2> 030010d502e00000 0000000000000000 CC_CPU_STOP The address problem can be seen by dumping the fault vector: 0000000040159000 <fault_vector_20>: 40159000: 63 6f 77 73 stb r15,-2447(dp) 40159004: 20 63 61 6e ldil L%b747000,r3 40159008: 20 66 6c 79 ldil L%-1c3b3000,r3 ... 40159020: 08 00 02 40 nop 40159024: 20 6e 60 02 ldil L%15d000,r3 40159028: 34 63 00 00 ldo 0(r3),r3 4015902c: e8 60 c0 02 bv,n r0(r3) 40159030: 08 00 02 40 nop 40159034: 00 00 00 00 break 0,0 40159038: c0 00 70 00 bb,*< r0,sar,40159840 <fault_vector_20+0x840> 4015903c: 00 00 00 00 break 0,0 Location 40159038 should contain the physical address of os_hpmc: 000000004015d000 <os_hpmc>: 4015d000: 08 1a 02 43 copy r26,r3 4015d004: 01 c0 08 a4 mfctl iva,r4 4015d008: 48 85 00 68 ldw 34(r4),r5 This patch moves the address setup into initialize_ivt to resolve the above problem. I tested the change by dumping the HPMC entry after setup: 0000000040209020: 8000240 0000000040209024: 206a2004 0000000040209028: 34630ac0 000000004020902c: e860c002 0000000040209030: 8000240 0000000040209034: 1bdddce6 0000000040209038: 15d000 000000004020903c: 1a0 Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jan Glauber authored
commit 0711e8c1 upstream. Please note that below oops is from an older kernel, but the same race seems to be present in the upstream kernel too. ---8<--- The following panic was encountered during removing the ipmi_ssif module: [ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090 [ 526.360464] Mem abort info: [ 526.363257] ESR = 0x86000007 [ 526.366304] Exception class = IABT (current EL), IL = 32 bits [ 526.372221] SET = 0, FnV = 0 [ 526.375269] EA = 0, S1PTW = 0 [ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416 [ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000 [ 526.396141] Internal error: Oops: 86000007 [#1] SMP [ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif] [ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1 [ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018 [ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO) [ 526.489713] pc : 0xffff000006923090 [ 526.493198] lr : call_timer_fn+0x34/0x178 [ 526.497194] sp : ffff000009b0bdd0 [ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082 [ 526.505796] x27: 0000000000000002 x26: ffff000009515188 [ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018 [ 526.516396] x23: ffff000009519660 x22: dead000000000200 [ 526.521696] x21: ffff000006923090 x20: 0000000000000100 [ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000 [ 526.532295] x17: 000000000000000e x16: 0000000000000007 [ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c [ 526.542894] x13: 0000000000000000 x12: 0000000000000000 [ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88 [ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005 [ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020 [ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20 [ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40 [ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40 [ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc) [ 526.586854] Call trace: [ 526.589289] 0xffff000006923090 [ 526.592419] expire_timers+0xc8/0x130 [ 526.596070] run_timer_softirq+0xec/0x1b0 [ 526.600070] __do_softirq+0x134/0x328 [ 526.603726] irq_exit+0xc8/0xe0 [ 526.606857] __handle_domain_irq+0x6c/0xc0 [ 526.610941] gic_handle_irq+0x84/0x188 [ 526.614679] el1_irq+0xe8/0x180 [ 526.617822] cpuidle_enter_state+0xa0/0x328 [ 526.621993] cpuidle_enter+0x34/0x48 [ 526.625564] call_cpuidle+0x44/0x70 [ 526.629040] do_idle+0x1b8/0x1f0 [ 526.632256] cpu_startup_entry+0x2c/0x30 [ 526.636174] secondary_start_kernel+0x11c/0x130 [ 526.640694] Code: bad PC value [ 526.643800] ---[ end trace d020b0b8417c2498 ]--- [ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt [ 526.654778] SMP: stopping secondary CPUs [ 526.658734] Kernel Offset: disabled [ 526.662211] CPU features: 0x5800c38 [ 526.665688] Memory Limit: none [ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Prevent mod_timer from arming a timer that was already removed by del_timer during module unload. Signed-off-by:
Jan Glauber <jglauber@cavium.com> Cc: <stable@vger.kernel.org> # 3.19 Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 95691e3e upstream. Currently, "disable_clkrun" yenta_socket module parameter is only implemented for TI CardBus bridges. Add also an implementation for Ricoh bridges that have the necessary setting documented in publicly available datasheets. Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work correctly unless the CLKRUN protocol is disabled. Let's also make it clear in its description that the "disable_clkrun" module parameter only works on these two previously mentioned brands of CardBus bridges. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Cc: stable@vger.kernel.org Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Rafael J. Wysocki authored
commit da5e79bc upstream. If the policy limits change between invocations of cs_dbs_update(), the requested frequency value stored in dbs_info may not be updated and the function may use a stale value of it next time. Moreover, if idle periods are takem into account by cs_dbs_update(), the requested frequency value stored in dbs_info may be below the min policy limit, which is incorrect. To fix these problems, always update the requested frequency value in dbs_info along with the local copy of it when the previous requested frequency is beyond the policy limits and avoid decreasing the requested frequency below the min policy limit when taking idle periods into account. Fixes: abb66279 (cpufreq: conservative: Fix next frequency selection) Fixes: 00bfe058 (cpufreq: conservative: Decrease frequency faster for deferred updates) Reported-by:
Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Hou Tao authored
commit 92e2921f upstream. When an invalid mount option is passed to jffs2, jffs2_parse_options() will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will be used (use-after-free) and freeed (double-free) in jffs2_kill_sb(). Fix it by removing the buggy invocation of kfree() when getting invalid mount options. Fixes: 92abc475 ("jffs2: implement mount option parsing and compression overriding") Cc: stable@kernel.org Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Dmitry Bazhenov authored
commit e7c6a556 upstream. Devices with compatible="pmbus" field have zero initial page count, and pmbus_clear_faults() being called before the page count auto- detection does not actually clear faults because it depends on the page count. Non-cleared faults in its turn may fail the subsequent page count auto-detection. This patch fixes this problem by calling pmbus_clear_fault_page() for currently set page and calling pmbus_clear_faults() after the page count was detected. Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Bazhenov <bazhenov.dn@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Tang Junhui authored
commit 2d6cb6ed upstream. refill->end record the last key of writeback, for example, at the first time, keys (1,128K) to (1,1024K) are flush to the backend device, but the end key (1,1024K) is not included, since the bellow code: if (bkey_cmp(k, refill->end) >= 0) { ret = MAP_DONE; goto out; } And in the next time when we refill writeback keybuf again, we searched key start from (1,1024K), and got a key bigger than it, so the key (1,1024K) missed. This patch modify the above code, and let the end key to be included to the writeback key buffer. Signed-off-by:
Tang Junhui <tang.junhui.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tang Junhui authored
commit 502b2915 upstream. Missed reading IOs are identified by s->cache_missed, not the s->cache_miss, so in trace_bcache_read() using trace_bcache_read to identify whether the IO is missed or not. Signed-off-by:
-
Rafał Miłecki authored
commit 940ec770 upstream. Fixing/optimizing bcm_qspi_bspi_read() performance introduced two changes: 1) It added a loop to read all requested data using multiple BSPI ops. 2) It bumped max size of a single BSPI block request from 256 to 512 B. The later change resulted in occasional BSPI timeouts causing a regression. For some unknown reason hardware doesn't always handle reads as expected when using 512 B chunks. In such cases it may happen that BSPI returns amount of requested bytes without the last 1-3 ones. It provides the remaining bytes later but doesn't raise an interrupt until another LR start. Switching back to 256 B reads fixes that problem and regression. Fixes: 345309fa ("spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Liu Xiang authored
commit 41fe2429 upstream. If the size of spi-nor flash is larger than 16MB, the read_opcode is set to SPINOR_OP_READ_1_1_4_4B, and fsl_qspi_get_seqid() will return -EINVAL when cmd is SPINOR_OP_READ_1_1_4_4B. This can cause read operation fail. Fixes: e46ecda7 ("mtd: spi-nor: Add Freescale QuadSPI driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by:
-
- 10 Nov, 2018 3 commits
-
-
Greg Kroah-Hartman authored
-
Christophe Leroy authored
[ Upstream commit f8b39039 ] In case of TX timeout, fs_timeout() calls phy_stop(), which triggers the following BUG_ON() as we are in interrupt. [92708.199889] kernel BUG at drivers/net/phy/mdio_bus.c:482! [92708.204985] Oops: Exception in kernel mode, sig: 5 [#1] [92708.210119] PREEMPT [92708.212107] CMPC885 [92708.214216] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 4.9.61 #39 [92708.223227] task: c60f0a40 task.stack: c6104000 [92708.227697] NIP: c02a84bc LR: c02a947c CTR: c02a93d8 [92708.232614] REGS: c6105c70 TRAP: 0700 Tainted: G W (4.9.61) [92708.241193] MSR: 00021032 <ME,IR,DR,RI>[92708.244818] CR: 24000822 XER: 20000000 [92708.248767] GPR00: c02a947c c6105d20 c60f0a40 c62b4c00 00000005 0000001f c069aad8 0001a688 GPR08: 00000007 00000100 c02a93d8 00000000 000005fc 00000000 c6213240 c06338e4 GPR16: 00000001 c06330d4 c0633094 00000000 c0680000 c6104000 c6104000 00000000 GPR24: 00000200 00000000 ffffffff 00000004 00000078 00009032 00000000 c62b4c00 NIP [c02a84bc] mdiobus_read+0x20/0x74 [92708.281517] LR [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.286547] Call Trace: [92708.288980] [c6105d20] [c6104000] 0xc6104000 (unreliable) [92708.294339] [c6105d40] [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.300098] [c6105d50] [c02a5330] phy_stop+0x60/0x9c [92708.305007] [c6105d60] [c02c84d0] fs_timeout+0xdc/0x110 [92708.310197] [c6105d80] [c035cd48] dev_watchdog+0x268/0x2a0 [92708.315593] [c6105db0] [c0060288] call_timer_fn+0x34/0x17c [92708.321014] [c6105dd0] [c00605f0] run_timer_softirq+0x21c/0x2e4 [92708.326887] [c6105e50] [c001e19c] __do_softirq+0xf4/0x2f4 [92708.332207] [c6105eb0] [c001e3c8] run_ksoftirqd+0x2c/0x40 [92708.337560] [c6105ec0] [c003b420] smpboot_thread_fn+0x1f0/0x258 [92708.343405] [c6105ef0] [c003745c] kthread+0xbc/0xd0 [92708.348217] [c6105f40] [c000c400] ret_from_kernel_thread+0x5c/0x64 [92708.354275] Instruction dump: [92708.357207] 7c0803a6 bbc10018 38210020 4e800020 7c0802a6 9421ffe0 54290024 bfc10018 [92708.364865] 90010024 7c7f1b78 81290008 552902ee <0f090000> 3bc3002c 7fc3f378 90810008 [92708.372711] ---[ end trace 42b05441616fafd7 ]--- This patch moves fs_timeout() actions into an async worker. Fixes: commit 48257c4f ("Add fs_enet ethernet network driver, for several embedded platforms") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Sebastian Andrzej Siewior authored
x86/fpu: Fix i486 + no387 boot crash by only saving FPU registers on context switch if there is an FPU commit 2224d616 upstream. Booting an i486 with "no387 nofxsr" ends with with the following crash: math_emulate: 0060:c101987d Kernel panic - not syncing: Math emulation needed in kernel on the first context switch in user land. The reason is that copy_fpregs_to_fpstate() tries FNSAVE which does not work as the FPU is turned off. This bug was introduced in: f1c8cd01 ("x86/fpu: Change fpu->fpregs_active users to fpu->fpstate_active") Add a check for X86_FEATURE_FPU before trying to save FPU registers (we have such a check in switch_fpu_finish() already). Signed-off-by:
-
