Instead of using the #ifdef'ery in the comedi_compat32.c and proc.c
files to include/exclude them from the comedi core, modify the Makefile
to include those files automatically when enabled in the .config.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl style fixes:
- Broken license text into 80 char lines
- fixed two space before tab issues
- Removed unnecessary braces from if-else
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix lines over 80 characters and line up nearby comments.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable to reduce the indentation in
`waveform_ai_interrupt()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Represent the fake samples as unsigned shorts instead of signed shorts,
as this is the usual Comedi convention.  There is no change to the
actual binary representation, although the `cfc_write_to_buffer()` call
currently expects a signed short for some bizarre reason.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the "comedi_test" module's acquisition timer function
`waveform_ai_interrupt()`, move the code for ending the acquisition
outside the scan loop.  Determine if the number of scans to be done is
sufficient to end the acquisition before entering the scan loop.  On
leaving the scan loop, set the `COMEDI_CB_EOA` event if the acquisition
is ending.  Only reschedule the timer if the acquisition is not ending.

Remove the somewhat useless `timer_running` flag from the private data.
This was intended to stop the timer function adding the timer back on
the timer queue periodically, but the flag setting wasn't synchronized
with the timer and we already use `del_timer_sync()` to synchronize
removal from the queue.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the "comedi_test" module, the timer function
`waveform_ai_interrupt()` doesn't need to remove the timer from the
timer queue as the caller has already removed it from the queue.  Remove
the call to `del_timer()` in this function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Éric Piel reported a kernel oops in the "comedi_test" module.  It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).

This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command.  In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.

Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a camel case issue.
Signed-off-by: Lijo Antony <lijo.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Store the 'index' for each comedi_subdevice when they are initially
allocated by comedi_alloc_subdevice(). This allows removing the
pointer math in comedi_fops.c which is used to figure out the
index that user space uses to access the individual subdevices.

Fix the ni_mio_common driver so it also uses the 'index' instead
of doing the pointer math.

Also, remove a couple unused macros in the pcmda12, pcmmio, and
pcmuio drivers which also do the pointer math to figure out the
index.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The hardware_device member of comedi_file_info is not set in this
function. Use kzalloc to make sure this pointer does not contain
invalid data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Change the (foo == NULL) tests to simply (!foo).

Use a local variable to hold a pointer to the async->buf_page_list[]
when doing the remap_pfn_range(). This cleans up the ugly line breaks
for the page_to_pfn(virt_to_page(...) operation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Flip the info->device tests so than the return NULL occurs last.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce, and use, a helper to check the subdevice runflags to see if
it is not in error and not running.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce, and use, a helper to check the subdevice runflags to see if
the SRF_ERROR flag is set.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdevice runflags are protected with a spin_lock. Only the comedi
core should be accessing them directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the helper function comedi_is_subdevice_running() instead of getting
the subdevice runflags and then masking the result.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function that checks the subdevice runflags to
see if the subdevice is running a command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, move this function so its near
comedi_set_subdevice_runflags().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As mentioned in CodingStyle, the prefered form is:

	p = kmalloc(sizeof(*p), ...);
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by the module_{init,exit} functions. For
aesthetic reasons, move it near them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, move the module_{init,exit} functions to the end
of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, move the MODULE_* information to the end of
the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Cleanup the sanity checking a bit and remove the need for the goto's
when returning an initial error condition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Cleanup the sanity checking a bit and remove the need for the goto's
when returning an initial error condition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Consolidate the local variables 'read_subdev' and 'write_subdev' into a
single local variable 's'.

Use comedi_dev_from_minor() to simplify the return -ENODEV tests.

Use a goto in the !dev->attached test so that the mutex_unlock() call
is in a common place.

Cleanup the formating of the || in the read and write subdevice poll
code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Consolidate the local variables 'read_subdev' and 'write_subdev' into a
single local variable 's'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'get' usually implies increasing a reference count of an object.
These function return a pointer but do not do any reference counting.
For aesthetic reasons, rename the functions to better represent what
they do.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'get' usually implies increasing a reference count of an object.
This function returns a pointer but does not do any reference counting.
For aesthetic reasons, rename the function to better represent what
its doing.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, rename this struct to comedi_file_info. It's
a bit shorter and allows fixing some of the ugly line breaks used
to keep the lines < 80 chars.

Also, consistently use the local variable name 'info' instead of the
longer 'dev_file_info' to also fix some ugly line breaks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This structure is only used in comedi_fops.c as part of handling
the file operations and sysfs files. Remove it's defenition from
comedidev.h so it's not exposed to the comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is now only used in comedi_fops.c and does not need
to be exported.

Make it static and move it to avoid forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the need to export comedi_get_device_file_info() by using the
new helper comedi_dev_from_minor(). This will also allow us to make
the comedi_device_file_info struct private.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A number of functions have to call comedi_get_device_file_info()
to get the comedi_device_file_info pointer for a given minor. That
pointer is only used to get the actual comedi_device pointer for
the minor.

Introduce a new helper function, comedi_dev_from_minor(), to simplify
this operation. This will also allow us to make the comedi_device_file_info
struct private.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These two inline helper function in comedidev.h are only used in
comedi_fops.c. They return information that should only be used
by the comedi core.

Move both functions to comedi_fops.c so they aren't exposed to
the comedi drivers. Also, remove the inline tag and let the
compiler figure it out.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move a couple of the functions to remove the need for the forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This module is built whenever CONFIG_COMEDI is enabled but it is
only used by the pcmmio and pcmuio drivers. The pcm_common module
consists of one exported function. Put a local copy of the function
in the pcmmio and pcmuio drivers.

This removes the need for the pcm_common module and the now unused
pcm_common.[ch] files can be deleted and removed from the Makefile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When setting up asynchronous commands on the special interrupt
subdevice, support the `TRIG_COUNT` stop source to allow the command to
stop automatically after a specified number of scans.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Initialize the special interrupt subdevice as a digital input subdevice
even if the interrupt handler cannot be registered.  It's `insn_bits`
handler will still read the interrupt status register.  This hardware
status bits in this register might be valid even if they haven't been
enabled in the interrupt control register, but this needs to be checked.
In any case, initializing the subdevice as a digital input subdevice is
harmless.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When setting up asynchronous commands for the special interrupt
subdevice, use the channel list to decide which interrupt sources to
enable.  Set the maximum length of the channel list to be the same as
the number of channels (2).  Normally, the channel list would include
channel 0, channel 1 or both.

When reading the scan data in the interrupt routine, the readings from
each channel in the channel list will be packed into a single unsigned
short data value.  Make each bit in this value correspond to an index in
the channel list.

Since all the channels in the channel list are read at the same time,
insist that the scan end argument is the length of the channel list and
that the conversion source is `TRIG_NOW`.

Allocate some private data for the special interrupt subdevice to hold a
spin-lock, the channels to be enabled and an indication of whether the
command is still active.  Stop the command if a buffer overflow occurs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>