- 06 Mar, 2015 15 commits
-
-
Arnd Bergmann authored
commit 61882b63 upstream. The two functions s3c2416_cpufreq_driver_init and s3c_cpufreq_register are marked init but are called from a context that might be run after the __init sections are discarded, as the compiler points out: WARNING: vmlinux.o(.data+0x1ad9dc): Section mismatch in reference from the variable s3c2416_cpufreq_driver to the function .init.text:s3c2416_cpufreq_driver_init() WARNING: drivers/built-in.o(.text+0x35b5dc): Section mismatch in reference from the function s3c2410a_cpufreq_add() to the function .init.text:s3c_cpufreq_register() This removes the __init markings. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit d4d4eda2 upstream. On Dell Latitude C600 laptop with Pentium 3 850MHz processor, the speedstep-smi driver sometimes loads and sometimes doesn't load with "change to state X failed" message. The hardware sometimes refuses to change frequency and in this case, we need to retry later. I found out that we need to enable interrupts while waiting. When we enable interrupts, the hardware blockage that prevents frequency transition resolves and the transition is possible. With disabled interrupts, the blockage doesn't resolve (no matter how long do we wait). The exact reasons for this hardware behavior are unknown. This patch enables interrupts in the function speedstep_set_state that can be called with disabled interrupts. However, this function is called with disabled interrupts only from speedstep_get_freqs, so it shouldn't cause any problem. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com Acked-by:
-
Viresh Kumar authored
commit 6ffae8c0 upstream. In __cpufreq_remove_dev_finish(), per-cpu 'cpufreq_cpu_data' needs to be cleared before calling kobject_put(&policy->kobj) and under cpufreq_driver_lock. Otherwise, if someone else calls cpufreq_cpu_get() in parallel with it, they can obtain a non-NULL policy from that after kobject_put(&policy->kobj) was executed. Consider this case: Thread A Thread B cpufreq_cpu_get() acquire cpufreq_driver_lock read-per-cpu cpufreq_cpu_data kobject_put(&policy->kobj); kobject_get(&policy->kobj); ... per_cpu(&cpufreq_cpu_data, cpu) = NULL And this will result in a warning like this one: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at include/linux/kref.h:47 kobject_get+0x41/0x50() Modules linked in: acpi_cpufreq(+) nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sd_mod ixgbe igb mdio ahci hwmon ... Call Trace: [<ffffffff81661b14>] dump_stack+0x46/0x58 [<ffffffff81072b61>] warn_slowpath_common+0x81/0xa0 [<ffffffff81072c7a>] warn_slowpath_null+0x1a/0x20 [<ffffffff812e16d1>] kobject_get+0x41/0x50 [<ffffffff815262a5>] cpufreq_cpu_get+0x75/0xc0 [<ffffffff81527c3e>] cpufreq_update_policy+0x2e/0x1f0 [<ffffffff810b8cb2>] ? up+0x32/0x50 [<ffffffff81381aa9>] ? acpi_ns_get_node+0xcb/0xf2 [<ffffffff81381efd>] ? acpi_evaluate_object+0x22c/0x252 [<ffffffff813824f6>] ? acpi_get_handle+0x95/0xc0 [<ffffffff81360967>] ? acpi_has_method+0x25/0x40 [<ffffffff81391e08>] acpi_processor_ppc_has_changed+0x77/0x82 [<ffffffff81089566>] ? move_linked_works+0x66/0x90 [<ffffffff8138e8ed>] acpi_processor_notify+0x58/0xe7 [<ffffffff8137410c>] acpi_ev_notify_dispatch+0x44/0x5c [<ffffffff8135f293>] acpi_os_execute_deferred+0x15/0x22 [<ffffffff8108c910>] process_one_work+0x160/0x410 [<ffffffff8108d05b>] worker_thread+0x11b/0x520 [<ffffffff8108cf40>] ? rescuer_thread+0x380/0x380 [<ffffffff81092421>] kthread+0xe1/0x100 [<ffffffff81092340>] ? kthread_create_on_node+0x1b0/0x1b0 [<ffffffff81669ebc>] ret_from_fork+0x7c/0xb0 [<ffffffff81092340>] ? kthread_create_on_node+0x1b0/0x1b0 ---[ end trace 89e66eb9795efdf7 ]--- The actual code flow is as follows: Thread A: Workqueue: kacpi_notify acpi_processor_notify() acpi_processor_ppc_has_changed() cpufreq_update_policy() cpufreq_cpu_get() kobject_get() Thread B: xenbus_thread() xenbus_thread() msg->u.watch.handle->callback() handle_vcpu_hotplug_event() vcpu_hotplug() cpu_down() __cpu_notify(CPU_POST_DEAD..) cpufreq_cpu_callback() __cpufreq_remove_dev_finish() cpufreq_policy_put_kobj() kobject_put() cpufreq_cpu_get() gets the policy from per-cpu variable cpufreq_cpu_data under cpufreq_driver_lock, and once it gets a valid policy it expects it to not be freed until cpufreq_cpu_put() is called. But the race happens when another thread puts the kobject first and updates cpufreq_cpu_data before or later. And so the first thread gets a valid policy structure and before it does kobject_get() on it, the second one has already done kobject_put(). Fix this by setting cpufreq_cpu_data to NULL before putting the kobject and that too under locks. Reported-by:
Ethan Zhao <ethan.zhao@oracle.com> Reported-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Michel Dänzer authored
commit 16b036af upstream. If the image size would ever read as 0, pci_get_rom_size() could keep processing the same image over and over again. Exit the loop if we ever read a length of zero. This fixes a soft lockup on boot when the radeon driver calls pci_get_rom_size() on an AMD Radeon R7 250X PCIe discrete graphics card. [bhelgaas: changelog, reference] Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386973Reported-by:
Federico <federicotg@gmail.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 145b3fe5 upstream. Some implementations of modprobe fail to load the driver for a PCI device automatically because the "interface" part of the modalias from the kernel is lowercase, and the modalias from file2alias is uppercase. The "interface" is the low-order byte of the Class Code, defined in PCI r3.0, Appendix D. Most interface types defined in the spec do not use alpha characters, so they won't be affected. For example, 00h, 01h, 10h, 20h, etc. are unaffected. Print the "interface" byte of the Class Code in uppercase hex, as we already do for the Vendor ID, Device ID, Class, etc. Commit 89ec3dcf ("PCI: Generate uppercase hex for modalias interface class") fixed only half of the problem. Some udev implementations rely on the uevent file and not the modalias file. Fixes: d1ded203 ("PCI: add MODALIAS to hotplug event for pci devices") Fixes: 89ec3dcf ("PCI: Generate uppercase hex for modalias interface class") Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Seth Forshee authored
commit 6d00f37e upstream. d1c7e29e (HID: i2c-hid: prevent buffer overflow in early IRQ) changed hid_get_input() to read ihid->bufsize bytes, which can be more than wMaxInputLength. This is the case with the Dell XPS 13 9343, and it is causing events to be missed. In some cases the missed events are releases, which can cause the cursor to jump or freeze, among other problems. Limit the number of bytes read to min(wMaxInputLength, ihid->bufsize) to prevent such problems. Fixes: d1c7e29e "HID: i2c-hid: prevent buffer overflow in early IRQ" Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Luciano Coelho authored
commit 5523d11c upstream. We don't really need to use different mac colors when adding mac contexts, because they're not used anywhere. In fact, the firmware doesn't accept 255 as a valid color, so we get into a SYSASSERT 0x3401 when we reach that. Remove the color increment to use always zero and avoid reaching 255. Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit fd66fc1c upstream. When iwl_mvm_power_update_mac() is called, we have already added the mac context, so if this call fails we should remove the mac. Fixes: commit e5e7aa8e ('iwlwifi: mvm: refactor power code') Signed-off-by:
-
Eyal Shapira authored
commit 2cee4762 upstream. These are coming from the FW and are used to access arrays. Bad values can cause an out of bounds access so discard such ba_notifs and warn. Signed-off-by:
Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit cd8f4384 upstream. The base address of the scheduler in the device's memory (SRAM) comes from two different sources. The periphery register and the alive notification from the firmware. We have a check in iwl_pcie_tx_start that ensures that they are the same. When we resume from WoWLAN, the firmware may have crashed for whatever reason. In that case, the whole device may be reset which means that the periphery register will hold a meaningless value. When we come to compare trans_pcie->scd_base_addr (which really holds the value we had when we loaded the WoWLAN firmware upon suspend) and the current value of the register, we don't see a match unsurprisingly. Trick the check to avoid a loud yet harmless WARN. Note that when the WoWLAN has crashed, we will see that in iwl_trans_pcie_d3_resume which will let the op_mode know. Once the op_mode is informed that the WowLAN firmware has crashed, it can't do much besides resetting the whole device. Reviewed-by:
-
Jan Kara authored
commit 6ee8e25f upstream. Commit e9fd702a ("audit: convert audit watches to use fsnotify instead of inotify") broke handling of renames in audit. Audit code wants to update inode number of an inode corresponding to watched name in a directory. When something gets renamed into a directory to a watched name, inotify previously passed moved inode to audit code however new fsnotify code passes directory inode where the change happened. That confuses audit and it starts watching parent directory instead of a file in a directory. This can be observed for example by doing: cd /tmp touch foo bar auditctl -w /tmp/foo touch foo mv bar foo touch foo In audit log we see events like: type=CONFIG_CHANGE msg=audit(1423563584.155:90): auid=1000 ses=2 op="updated rules" path="/tmp/foo" key=(null) list=4 res=1 ... type=PATH msg=audit(1423563584.155:91): item=2 name="bar" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE type=PATH msg=audit(1423563584.155:91): item=3 name="foo" inode=1046842 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE type=PATH msg=audit(1423563584.155:91): item=4 name="foo" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=CREATE ... and that's it - we see event for the first touch after creating the audit rule, we see events for rename but we don't see any event for the last touch. However we start seeing events for unrelated stuff happening in /tmp. Fix the problem by passing moved inode as data in the FS_MOVED_FROM and FS_MOVED_TO events instead of the directory where the change happens. This doesn't introduce any new problems because noone besides audit_watch.c cares about the passed value: fs/notify/fanotify/fanotify.c cares only about FSNOTIFY_EVENT_PATH events. fs/notify/dnotify/dnotify.c doesn't care about passed 'data' value at all. fs/notify/inotify/inotify_fsnotify.c uses 'data' only for FSNOTIFY_EVENT_PATH. kernel/audit_tree.c doesn't care about passed 'data' at all. kernel/audit_watch.c expects moved inode as 'data'. Fixes: e9fd702a ("audit: convert audit watches to use fsnotify instead of inotify") Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Paul Moore <paul@paul-moore.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dave Chinner authored
commit 3443a3bc upstream. When the superblock is modified in a transaction, the commonly modified fields are not actually copied to the superblock buffer to avoid the buffer lock becoming a serialisation point. However, there are some other operations that modify the superblock fields within the transaction that don't directly log to the superblock but rely on the changes to be applied during the transaction commit (to minimise the buffer lock hold time). When we do this, we fail to mark the buffer log item as being a superblock buffer and that can lead to the buffer not being marked with the corect type in the log and hence causing recovery issues. Fix it by setting the type correctly, similar to xfs_mod_sb()... Tested-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
commit f19b872b upstream. This leads to log recovery throwing errors like: XFS (md0): Mounting V5 Filesystem XFS (md0): Starting recovery (logdev: internal) XFS (md0): Unknown buffer type 0! XFS (md0): _xfs_buf_ioapply: no ops on block 0xaea8802/0x1 ffff8800ffc53800: 58 41 47 49 ..... Which is the AGI buffer magic number. Ensure that we set the type appropriately in both unlink list addition and removal. Tested-by:
-
Dave Chinner authored
commit 0d612fb5 upstream. Jan Kara reported that log recovery was finding buffers with invalid types in them. This should not happen, and indicates a bug in the logging of buffers. To catch this, add asserts to the buffer formatting code to ensure that the buffer type is in range when the transaction is committed. We don't set a type on buffers being marked stale - they are not going to get replayed, the format item exists only for recovery to be able to prevent replay of the buffer, so the type does not matter. Hence that needs special casing here. Reported-by:
-
Adam Lee authored
commit c561a575 upstream. BugLink: https://bugs.launchpad.net/bugs/1400215 ath3k devices fail to load firmwares on xHCI buses, but work well on EHCI, this might be a compatibility issue between xHCI and ath3k chips. As my testing result, those chips will work on xHCI buses again with this patch. This workaround is from Qualcomm, they also did some workarounds in Windows driver. Signed-off-by:
Adam Lee <adam.lee@canonical.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
- 27 Feb, 2015 18 commits
-
-
Greg Kroah-Hartman authored
-
Austin Lund authored
commit a8f29e89 upstream. Userspace expects to see a long space before the first pulse is sent on the lirc device. Currently, if a long time has passed and a new packet is started, the lirc codec just returns and doesn't send anything. This makes lircd ignore many perfectly valid signals unless they are sent in quick sucession. When a reset event is delivered, we cannot know anything about the duration of the space. But it should be safe to assume it has been a long time and we just set the duration to maximum. Signed-off-by:
Austin Lund <austin.lund@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Saran Maruti Ramanara authored
[ Upstream commit cfbf654e ] When making use of RFC5061, section 4.2.4. for setting the primary IP address, we're passing a wrong parameter header to param_type2af(), resulting always in NULL being returned. At this point, param.p points to a sctp_addip_param struct, containing a sctp_paramhdr (type = 0xc004, length = var), and crr_id as a correlation id. Followed by that, as also presented in RFC5061 section 4.2.4., comes the actual sctp_addr_param, which also contains a sctp_paramhdr, but this time with the correct type SCTP_PARAM_IPV{4,6}_ADDRESS that param_type2af() can make use of. Since we already hold a pointer to addr_param from previous line, just reuse it for param_type2af(). Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by:
Saran Maruti Ramanara <saran.neti@telus.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit e2a4800e ] When we've run out of space in the output buffer to store more data, we will call zlib_deflate with a NULL output buffer until we've consumed remaining input. When this happens, olen contains the size the output buffer would have consumed iff we'd have had enough room. This can later cause skb_over_panic when ppp_generic skb_put()s the returned length. Reported-by:
Iain Douglas <centos@1n6.org.uk> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit bdbbb852 ] In commit be9f4a44 ("ipv4: tcp: remove per net tcp_sock") I tried to address contention on a socket lock, but the solution I chose was horrible : commit 3a7c384f ("ipv4: tcp: unicast_sock should not land outside of TCP stack") addressed a selinux regression. commit 0980e56e ("ipv4: tcp: set unicast_sock uc_ttl to -1") took care of another regression. commit b5ec8eea ("ipv4: fix ip_send_skb()") fixed another regression. commit 811230cd ("tcp: ipv4: initialize unicast_sock sk_pacing_rate") was another shot in the dark. Really, just use a proper socket per cpu, and remove the skb_orphan() call, to re-enable flow control. This solves a serious problem with FQ packet scheduler when used in hostile environments, as we do not want to allocate a flow structure for every RST packet sent in response to a spoofed packet. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 811230cd ] When I added sk_pacing_rate field, I forgot to initialize its value in the per cpu unicast_sock used in ip_send_unicast_reply() This means that for sch_fq users, RST packets, or ACK packets sent on behalf of TIME_WAIT sockets might be sent to slowly or even dropped once we reach the per flow limit. Signed-off-by:
-
Roopa Prabhu authored
[ Upstream commit 59ccaaaa ] Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081 This patch avoids calling rtnl_notify if the device ndo_bridge_getlink handler does not return any bytes in the skb. Alternately, the skb->len check can be moved inside rtnl_notify. For the bridge vlan case described in 92081, there is also a fix needed in bridge driver to generate a proper notification. Will fix that in subsequent patch. v2: rebase patch on net tree Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 06539d30 ] Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit 24e579c8 ] With the commit d75b1ade ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When in busy_poll is we return 0 in napi_poll. We should return budget. Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Acked-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 6e9e16e6 ] Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by:
-
subashab@codeaurora.org authored
[ Upstream commit fc752f1f ] An exception is seen in ICMP ping receive path where the skb destructor sock_rfree() tries to access a freed socket. This happens because ping_rcv() releases socket reference with sock_put() and this internally frees up the socket. Later icmp_rcv() will try to free the skb and as part of this, skb destructor is called and which leads to a kernel panic as the socket is freed already in ping_rcv(). -->|exception -007|sk_mem_uncharge -007|sock_rfree -008|skb_release_head_state -009|skb_release_all -009|__kfree_skb -010|kfree_skb -011|icmp_rcv -012|ip_local_deliver_finish Fix this incorrect free by cloning this skb and processing this cloned skb instead. This patch was suggested by Eric Dumazet Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 86f3cddb ] While working on rhashtable walking I noticed that the UDP diag dumping code is buggy. In particular, the socket skipping within a chain never happens, even though we record the number of sockets that should be skipped. As this code was supposedly copied from TCP, this patch does what TCP does and resets num before we walk a chain. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit df4d9254 ] Not caching dst_entries which cause redirects could be exploited by hosts on the same subnet, causing a severe DoS attack. This effect aggravated since commit f8864972 ("ipv4: fix dst race in sk_dst_get()"). Lookups causing redirects will be allocated with DST_NOCACHE set which will force dst_release to free them via RCU. Unfortunately waiting for RCU grace period just takes too long, we can end up with >1M dst_entries waiting to be released and the system will run OOM. rcuos threads cannot catch up under high softirq load. Attaching the flag to emit a redirect later on to the specific skb allows us to cache those dst_entries thus reducing the pressure on allocation and deallocation. This issue was discovered by Marcelo Leitner. Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
Marcelo Leitner <mleitner@redhat.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 600ddd68 ] When hitting an INIT collision case during the 4WHS with AUTH enabled, as already described in detail in commit 1be9a950 ("net: sctp: inherit auth_capable on INIT collisions"), it can happen that we occasionally still remotely trigger the following panic on server side which seems to have been uncovered after the fix from commit 1be9a950 ... [ 533.876389] BUG: unable to handle kernel paging request at 00000000ffffffff [ 533.913657] IP: [<ffffffff811ac385>] __kmalloc+0x95/0x230 [ 533.940559] PGD 5030f2067 PUD 0 [ 533.957104] Oops: 0000 [#1] SMP [ 533.974283] Modules linked in: sctp mlx4_en [...] [ 534.939704] Call Trace: [ 534.951833] [<ffffffff81294e30>] ? crypto_init_shash_ops+0x60/0xf0 [ 534.984213] [<ffffffff81294e30>] crypto_init_shash_ops+0x60/0xf0 [ 535.015025] [<ffffffff8128c8ed>] __crypto_alloc_tfm+0x6d/0x170 [ 535.045661] [<ffffffff8128d12c>] crypto_alloc_base+0x4c/0xb0 [ 535.074593] [<ffffffff8160bd42>] ? _raw_spin_lock_bh+0x12/0x50 [ 535.105239] [<ffffffffa0418c11>] sctp_inet_listen+0x161/0x1e0 [sctp] [ 535.138606] [<ffffffff814e43bd>] SyS_listen+0x9d/0xb0 [ 535.166848] [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b ... or depending on the the application, for example this one: [ 1370.026490] BUG: unable to handle kernel paging request at 00000000ffffffff [ 1370.026506] IP: [<ffffffff811ab455>] kmem_cache_alloc+0x75/0x1d0 [ 1370.054568] PGD 633c94067 PUD 0 [ 1370.070446] Oops: 0000 [#1] SMP [ 1370.085010] Modules linked in: sctp kvm_amd kvm [...] [ 1370.963431] Call Trace: [ 1370.974632] [<ffffffff8120f7cf>] ? SyS_epoll_ctl+0x53f/0x960 [ 1371.000863] [<ffffffff8120f7cf>] SyS_epoll_ctl+0x53f/0x960 [ 1371.027154] [<ffffffff812100d3>] ? anon_inode_getfile+0xd3/0x170 [ 1371.054679] [<ffffffff811e3d67>] ? __alloc_fd+0xa7/0x130 [ 1371.080183] [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b With slab debugging enabled, we can see that the poison has been overwritten: [ 669.826368] BUG kmalloc-128 (Tainted: G W ): Poison overwritten [ 669.826385] INFO: 0xffff880228b32e50-0xffff880228b32e50. First byte 0x6a instead of 0x6b [ 669.826414] INFO: Allocated in sctp_auth_create_key+0x23/0x50 [sctp] age=3 cpu=0 pid=18494 [ 669.826424] __slab_alloc+0x4bf/0x566 [ 669.826433] __kmalloc+0x280/0x310 [ 669.826453] sctp_auth_create_key+0x23/0x50 [sctp] [ 669.826471] sctp_auth_asoc_create_secret+0xcb/0x1e0 [sctp] [ 669.826488] sctp_auth_asoc_init_active_key+0x68/0xa0 [sctp] [ 669.826505] sctp_do_sm+0x29d/0x17c0 [sctp] [...] [ 669.826629] INFO: Freed in kzfree+0x31/0x40 age=1 cpu=0 pid=18494 [ 669.826635] __slab_free+0x39/0x2a8 [ 669.826643] kfree+0x1d6/0x230 [ 669.826650] kzfree+0x31/0x40 [ 669.826666] sctp_auth_key_put+0x19/0x20 [sctp] [ 669.826681] sctp_assoc_update+0x1ee/0x2d0 [sctp] [ 669.826695] sctp_do_sm+0x674/0x17c0 [sctp] Since this only triggers in some collision-cases with AUTH, the problem at heart is that sctp_auth_key_put() on asoc->asoc_shared_key is called twice when having refcnt 1, once directly in sctp_assoc_update() and yet again from within sctp_auth_asoc_init_active_key() via sctp_assoc_update() on the already kzfree'd memory, which is also consistent with the observation of the poison decrease from 0x6b to 0x6a (note: the overwrite is detected at a later point in time when poison is checked on new allocation). Reference counting of auth keys revisited: Shared keys for AUTH chunks are being stored in endpoints and associations in endpoint_shared_keys list. On endpoint creation, a null key is being added; on association creation, all endpoint shared keys are being cached and thus cloned over to the association. struct sctp_shared_key only holds a pointer to the actual key bytes, that is, struct sctp_auth_bytes which keeps track of users internally through refcounting. Naturally, on assoc or enpoint destruction, sctp_shared_key are being destroyed directly and the reference on sctp_auth_bytes dropped. User space can add keys to either list via setsockopt(2) through struct sctp_authkey and by passing that to sctp_auth_set_key() which replaces or adds a new auth key. There, sctp_auth_create_key() creates a new sctp_auth_bytes with refcount 1 and in case of replacement drops the reference on the old sctp_auth_bytes. A key can be set active from user space through setsockopt() on the id via sctp_auth_set_active_key(), which iterates through either endpoint_shared_keys and in case of an assoc, invokes (one of various places) sctp_auth_asoc_init_active_key(). sctp_auth_asoc_init_active_key() computes the actual secret from local's and peer's random, hmac and shared key parameters and returns a new key directly as sctp_auth_bytes, that is asoc->asoc_shared_key, plus drops the reference if there was a previous one. The secret, which where we eventually double drop the ref comes from sctp_auth_asoc_set_secret() with intitial refcount of 1, which also stays unchanged eventually in sctp_assoc_update(). This key is later being used for crypto layer to set the key for the hash in crypto_hash_setkey() from sctp_auth_calculate_hmac(). To close the loop: asoc->asoc_shared_key is freshly allocated secret material and independant of the sctp_shared_key management keeping track of only shared keys in endpoints and assocs. Hence, also commit 4184b2a7 ("net: sctp: fix memory leak in auth key management") is independant of this bug here since it concerns a different layer (though same structures being used eventually). asoc->asoc_shared_key is reference dropped correctly on assoc destruction in sctp_association_free() and when active keys are being replaced in sctp_auth_asoc_init_active_key(), it always has a refcount of 1. Hence, it's freed prematurely in sctp_assoc_update(). Simple fix is to remove that sctp_auth_key_put() from there which fixes these panics. Fixes: 730fc3d0 ("[SCTP]: Implete SCTP-AUTH parameter processing") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6088beef ] NAPI poll logic now enforces that a poller returns exactly the budget when it wants to be called again. If a driver limits TX completion, it has to return budget as well when the limit is hit, not the number of received packets. Reported-and-tested-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Hagen Paul Pfeifer authored
[ Upstream commit 9d289715 ] Reduce the attack vector and stop generating IPv6 Fragment Header for paths with an MTU smaller than the minimum required IPv6 MTU size (1280 byte) - called atomic fragments. See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1] for more information and how this "feature" can be misused. [1] https://tools.ietf.org/html/draft-ietf-6man-deprecate-atomfrag-generation-00Signed-off-by:
Fernando Gont <fgont@si6networks.com> Signed-off-by:
Hagen Paul Pfeifer <hagen@jauu.net> Acked-by:
-
Eric Dumazet authored
[ Upstream commit ac64da0b ] softnet_data.input_pkt_queue is protected by a spinlock that we must hold when transferring packets from victim queue to an active one. This is because other cpus could still be trying to enqueue packets into victim queue. A second problem is that when we transfert the NAPI poll_list from victim to current cpu, we absolutely need to special case the percpu backlog, because we do not want to add complex locking to protect process_queue : Only owner cpu is allowed to manipulate it, unless cpu is offline. Based on initial patch from Prasad Sodagudi & Subash Abhinov Kasiviswanathan. This version is better because we do not slow down packet processing, only make migration safer. Reported-by:
Prasad Sodagudi <psodagud@codeaurora.org> Reported-by:
-
Willem de Bruijn authored
[ Upstream commit f812116b ] The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That structure is defined and allocated on the stack as struct { struct sock_extended_err ee; struct sockaddr_in(6) offender; } errhdr; The second part is only initialized for certain SO_EE_ORIGIN values. Always initialize it completely. An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that would return uninitialized bytes. Signed-off-by:
Willem de Bruijn <willemb@google.com> ---- Also verified that there is no padding between errhdr.ee and errhdr.offender that could leak additional kernel data. Acked-by:
-
- 11 Feb, 2015 7 commits
-
-
Greg Kroah-Hartman authored
-
Mathias Krause authored
The backport of commit 5d26a105 ("crypto: prefix module autoloading with "crypto-"") lost the MODULE_ALIAS_CRYPTO() annotation of crc32c.c. Add it to fix the reported filesystem related regressions. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Reported-by:
Philip Müller <philm@manjaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Rob McCathie <rob@manjaro.org> Cc: Luis Henriques <luis.henriques@canonical.com> Cc: Kamal Mostafa <kamal@canonical.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Andy Lutomirski authored
commit d974baa3 upstream. CR4 isn't constant; at least the TSD and PCE bits can vary. TBH, treating CR0 and CR3 as constant scares me a bit, too, but it looks like it's correct. This adds a branch and a read from cr4 to each vm entry. Because it is extremely likely that consecutive entries into the same vcpu will have the same host cr4 value, this fixes up the vmcs instead of restoring cr4 after the fact. A subsequent patch will add a kernel-wide cr4 shadow, reducing the overhead in the common case to just two memory reads and a branch. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Signed-off-by:
Wang Kai <morgan.wang@huawei.com> Signed-off-by:
-
Lai Jiangshan authored
commit 4bee9686 upstream. The following race exists in the smpboot percpu threads management: CPU0 CPU1 cpu_up(2) get_online_cpus(); smpboot_create_threads(2); smpboot_register_percpu_thread(); for_each_online_cpu(); __smpboot_create_thread(); __cpu_up(2); This results in a missing per cpu thread for the newly onlined cpu2 and in a NULL pointer dereference on a consecutive offline of that cpu. Proctect smpboot_register_percpu_thread() with get_online_cpus() to prevent that. [ tglx: Massaged changelog and removed the change in smpboot_unregister_percpu_thread() because that's an optimization and therefor not stable material. ] Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/1406777421-12830-1-git-send-email-laijs@cn.fujitsu.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Takashi Iwai authored
commit 4161b450 upstream. When ak4114 work calls its callback and the callback invokes ak4114_reinit(), it stalls due to flush_delayed_work(). For avoiding this, control the reentrance by introducing a refcount. Also flush_delayed_work() is replaced with cancel_delayed_work_sync(). The exactly same bug is present in ak4113.c and fixed as well. Reported-by:
Pavel Hofman <pavel.hofman@ivitera.com> Acked-by:
Jaroslav Kysela <perex@perex.cz> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Eric Nelson authored
commit 58cc9c9a upstream. To quote from section 1.3.1 of the data sheet: The SGTL5000 has an internal reset that is deasserted 8 SYS_MCLK cycles after all power rails have been brought up. After this time, communication can start ... 1.0us represents 8 SYS_MCLK cycles at the minimum 8.0 MHz SYS_MCLK. Signed-off-by:
Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Bo Shen authored
commit a43bd7e1 upstream. According to the I2S specification information as following: - WS = 0, channel 1 (left) - WS = 1, channel 2 (right) So, the start event should be TF/RF falling edge. Reported-by:
Songjun Wu <songjun.wu@atmel.com> Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
-
