Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move ODM_GetRightChnlPlaceforIQK() from HalPhyRf.c to HalPhyRf_8188e.c.
Move ODM_TARGET_CHNL_NUM_2G_5G from HalPhyRf.h to HalPhyRf_8188e.h.
After the movement of function and macro HalPhyRf.[h|c] files are redundant.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver doesn't need usb_vendor_req.h.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver doesn't need Hal8188EReg.h file.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

value stored in variable last_tx_complete_time isn't being used
by driver.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

value stored in variable last_tx_time isn't being used
by driver.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove rtl8188e_silentreset_for_specific_platform() and function pointer
->silentreset pointing to it.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_hal_sreset_reset() is a wrapper to call
rtl8188e_silentreset_for_specific_platform(), which has empty defination.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove rtl8188e_sreset_linked_status_check() and function pointer
->sreset_linked_status_check pointing to it.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_hal_sreset_linked_status_check() is a wrapper to call
rtl8188e_sreset_linked_status_check(), which doesn't do anything
useful.

rtl8188e_sreset_linked_status_check() will also be removed later.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove rtl8188e_sreset_xmit_status_check() and function pointer
->sreset_xmit_status_check pointing to it.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_hal_sreset_xmit_status_check() is a wrapper to call
rtl8188e_sreset_xmit_status_check(), which calls
rtl8188e_silentreset_for_specific_platform() in case of transmission has
stopped to do a silent reset and restore the transmission but
rtl8188e_silentreset_for_specific_platform() has empty defination,
so we can remove rtw_hal_sreset_xmit_status_check() because it doesn't
serve its purpose.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We can replace rtw_hal_sreset_reset_value() with rtw_hal_sreset_init() because
both function call sreset_reset_value() and sreset_init_value() respectively at
the end of code path, and function defination of sreset_reset_value() and
sreset_init_value() is identical.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

psrtpriv->silent_reset_inprogress is always false.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

silentreset_mutex initialized but not being used.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192ee/btcoexist/halbtc8821a2ant.c:2491:3-4: Unneeded semicolon

 Removes unneeded semicolon.

Generated by: /kbuild/src/linux/scripts/coccinelle/misc/semicolon.cocci

CC: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Done as task 10 of the eudyptula challenge.
Signed-off-by: Nicolas Koch <nioko1337@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This prevents PHY not found types of errors for PHY drivers that are
probed after the Ethernet driver is probed, because the ifconfig UP is
done from userspace after all drivers have been probed.

Also avoid the cvmx-helper-board.c PHY code if a real PHY driver is
present, this allows a bootloader supplied device tree to specify the
PHY information rather than having to modify the code for each
different board.
Tested-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgap_init_one() needs to handle error properly
if one of functions in dgap_init_one() is failed.

Introduce some functions for handling error in dgap_init_one()
 - dgap_tty_unregister() : unregister tty driver
 - dgap_free_flipbuf() : free flip buffer
 - dgap_release_remap() : release memory region and unmapped memory.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgap_firmware_load() has a lot of stuff which are
unrelated with loading firmware.
So just moved to dgap_init_one().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dgap_after_config_loaded() as function name doesn't tell
what it does.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dgap_free_irq() will free the irq which is requested in
dgap_request_irq().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It should be called after dgap_tty_register_ports() is failed.
So channels which are allocated in dgap_tty_init() will be freed.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firstminor in struct borad_t is always zero, so it
can be removed.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"remove" parameter is not used in dgap_parsefile().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- dgap_tty_uninit() doesn't match dgap_tty_init() at all.
so rename it. It is just used for cleanup when this module is
exited or failed to initialize by dgap_init_module.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pass "brd" to dgap_after_config_loaded() instead of passing
"dgap_numboards" and looking up brd again.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- Pass "dgap_numboards" to dgap_found_board() instead of
using a global variable.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgap_config_buf is only used in dgap_firmware_load().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- The dgap_tty_register_ports() needs to handle if the
tty_port_register_device() fails.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the kzalloc() fails for channels, it need to handle
that error. It should free channels which were already
allocated.

And also removes the call to dgap_tty_uninit() in
dgap_firmware_load().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- The channels array were set to NULL in dgap_found_board().
- Removes redundant null check for channels array in for loop,
if one of the channel cannot be allocated, dgap_tty_init() just returns
an error.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adds a label for "kfree(brd)". And also remove
a state value as BOARD_FAILED in brd when dgap_do_remap() is failed.
Because "brd" will free after failure.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>