1. 30 Mar, 2017 4 commits
  2. 24 Mar, 2017 3 commits
  3. 23 Mar, 2017 2 commits
    • Michel Dänzer's avatar
      drm/fb-helper: Allow var->x/yres(_virtual) < fb->width/height again · 12ffed96
      Michel Dänzer authored
      Otherwise this can also prevent modesets e.g. for switching VTs, when
      multiple monitors with different native resolutions are connected.
      
      The depths must match though, so keep the != test for that.
      
      Also update the DRM_DEBUG output to be slightly more accurate, this
      doesn't only affect requests from userspace.
      
      Bugzilla: https://bugs.freedesktop.org/99841
      Fixes: 865afb11 ("drm/fb-helper: reject any changes to the fbdev")
      Signed-off-by: default avatarMichel Dänzer <michel.daenzer@amd.com>
      Reviewed-by: default avatarDaniel Stone <daniels@collabora.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Link: http://patchwork.freedesktop.org/patch/msgid/20170323085326.20185-1-michel@daenzer.net
      12ffed96
    • Dave Airlie's avatar
      Merge tag 'drm-intel-fixes-2017-03-22' of... · d08997cb
      Dave Airlie authored
      Merge tag 'drm-intel-fixes-2017-03-22' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
      
      drm/i915 fixes for v4.11-rc4
      
      * tag 'drm-intel-fixes-2017-03-22' of git://anongit.freedesktop.org/git/drm-intel:
        drm/i915: make context status notifier head be per engine
        drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)
        drm/i915/gvt: Fix gvt scheduler interval time
        drm/i915/gvt: GVT pin/unpin shadow context
        drm/i915/gvt: scan shadow indirect context image when valid
        drm/i915/kvmgt: fix suspicious rcu dereference usage
        drm/i915/gvt: add enable_execlists check before enable gvt
        drm/i915/gvt: Remove bogus retry around i915_wait_request
        drm/i915/gvt: correct the ggtt valid bit check in pipe control command
        drm/i915/gvt: replace the gvt_err with gvt_vgpu_err
        drm/i915/gvt: handle force-nonpriv registers, cmd parser part
        drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks
        drm/i915/glk: Remove MODULE_FIRMWARE() tag from Geminilake's DMC
        drm/i915: Reject HDMI 12bpc if the sink doesn't indicate support
        drm/i915: Always call i915_gem_reset_finish() following i915_gem_reset_prepare()
        drm/i915: Stop using RP_DOWN_EI on Baytrail
        drm/i915: Drop support for I915_EXEC_CONSTANTS_* execbuf parameters.
        drm/i915: Only enable hotplug interrupts if the display interrupts are enabled
        drm/i915: Disable engine->irq_tasklet around resets
        drm/i915: Split GEM resetting into 3 phases
      d08997cb
  4. 21 Mar, 2017 11 commits
    • Changbin Du's avatar
      drm/i915: make context status notifier head be per engine · 590379ae
      Changbin Du authored
      GVTg has introduced the context status notifier to schedule the GVTg
      workload. At that time, the notifier is bound to GVTg context only,
      so GVTg is not aware of host workloads.
      
      Now we are going to improve GVTg's guest workload scheduler policy,
      and add Guc emulation support for new Gen graphics. Both these two
      features require acknowledgment for all contexts running on hardware.
      (But will not alter host workload.) So here try to make some change.
      
      The change is simple:
        1. Move the context status notifier head from i915_gem_context to
           intel_engine_cs. Which means there is a notifier head per engine
           instead of per context. Execlist driver still call notifier for
           each context sched-in/out events of current engine.
        2. At GVTg side, it binds a notifier_block for each physical engine
           at GVTg initialization period. Then GVTg can hear all context
           status events.
      
      In this patch, GVTg do nothing for host context event, but later
      will add a function there. But in any case, the notifier callback is
      a noop if this is no active vGPU.
      
      Since intel_gvt_init() is called at early initialization stage and
      require the status notifier head has been initiated, I initiate it in
      intel_engine_setup().
      
      v2: remove a redundant newline. (chris)
      
      Fixes: 3c7ba635 ("drm/i915: Introduce execlist context status change notification")
      Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100232Signed-off-by: default avatarChangbin Du <changbin.du@intel.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
      Cc: Zhi Wang <zhi.a.wang@intel.com>
      Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Link: http://patchwork.freedesktop.org/patch/msgid/20170313024711.28591-1-changbin.du@intel.comAcked-by: default avatarZhenyu Wang <zhenyuw@linux.intel.com>
      Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      (cherry picked from commit 3fc03069)
      Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      Link: http://patchwork.freedesktop.org/patch/msgid/20170321144720.17020-1-chris@chris-wilson.co.uk
      590379ae
    • Chris Wilson's avatar
      drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker) · 3d3d18f0
      Chris Wilson authored
      The rcu_barrier() takes the cpu_hotplug mutex which itself is not
      reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker.
      
      [  309.661373] =========================================================
      [  309.661376] [ INFO: possible irq lock inversion dependency detected ]
      [  309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G        W
      [  309.661383] ---------------------------------------------------------
      [  309.661386] gem_exec_gttfil/6435 just changed the state of lock:
      [  309.661389]  (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160
      [  309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past:
      [  309.661402]  (cpu_hotplug.lock){+.+.+.}
      [  309.661404]
      
                     and interrupts could create inverse lock ordering between them.
      
      [  309.661410]
                     other info that might help us debug this:
      [  309.661414]  Possible interrupt unsafe locking scenario:
      
      [  309.661417]        CPU0                    CPU1
      [  309.661419]        ----                    ----
      [  309.661421]   lock(cpu_hotplug.lock);
      [  309.661425]                                local_irq_disable();
      [  309.661432]                                lock(rcu_preempt_state.barrier_mutex);
      [  309.661441]                                lock(cpu_hotplug.lock);
      [  309.661446]   <Interrupt>
      [  309.661448]     lock(rcu_preempt_state.barrier_mutex);
      [  309.661453]
                      *** DEADLOCK ***
      
      [  309.661460] 4 locks held by gem_exec_gttfil/6435:
      [  309.661464]  #0:  (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0
      [  309.661475]  #1:  (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0
      [  309.661486]  #2:  (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0
      [  309.661495]  #3:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915]
      [  309.661540]
                     the shortest dependencies between 2nd lock and 1st lock:
      [  309.661547]  -> (cpu_hotplug.lock){+.+.+.} ops: 829 {
      [  309.661553]     HARDIRQ-ON-W at:
      [  309.661560]                       __lock_acquire+0x5e5/0x1b50
      [  309.661565]                       lock_acquire+0xc9/0x220
      [  309.661572]                       __mutex_lock+0x6e/0x990
      [  309.661576]                       mutex_lock_nested+0x16/0x20
      [  309.661583]                       get_online_cpus+0x61/0x80
      [  309.661590]                       kmem_cache_create+0x25/0x1d0
      [  309.661596]                       debug_objects_mem_init+0x30/0x249
      [  309.661602]                       start_kernel+0x341/0x3fe
      [  309.661607]                       x86_64_start_reservations+0x2a/0x2c
      [  309.661612]                       x86_64_start_kernel+0x173/0x186
      [  309.661619]                       verify_cpu+0x0/0xfc
      [  309.661622]     SOFTIRQ-ON-W at:
      [  309.661627]                       __lock_acquire+0x611/0x1b50
      [  309.661632]                       lock_acquire+0xc9/0x220
      [  309.661636]                       __mutex_lock+0x6e/0x990
      [  309.661641]                       mutex_lock_nested+0x16/0x20
      [  309.661646]                       get_online_cpus+0x61/0x80
      [  309.661650]                       kmem_cache_create+0x25/0x1d0
      [  309.661655]                       debug_objects_mem_init+0x30/0x249
      [  309.661660]                       start_kernel+0x341/0x3fe
      [  309.661664]                       x86_64_start_reservations+0x2a/0x2c
      [  309.661669]                       x86_64_start_kernel+0x173/0x186
      [  309.661674]                       verify_cpu+0x0/0xfc
      [  309.661677]     RECLAIM_FS-ON-W at:
      [  309.661682]                          mark_held_locks+0x6f/0xa0
      [  309.661687]                          lockdep_trace_alloc+0xb3/0x100
      [  309.661693]                          kmem_cache_alloc_trace+0x31/0x2e0
      [  309.661699]                          __smpboot_create_thread.part.1+0x27/0xe0
      [  309.661704]                          smpboot_create_threads+0x61/0x90
      [  309.661709]                          cpuhp_invoke_callback+0x9c/0x8a0
      [  309.661713]                          cpuhp_up_callbacks+0x31/0xb0
      [  309.661718]                          _cpu_up+0x7a/0xc0
      [  309.661723]                          do_cpu_up+0x5f/0x80
      [  309.661727]                          cpu_up+0xe/0x10
      [  309.661734]                          smp_init+0x71/0xb3
      [  309.661738]                          kernel_init_freeable+0x94/0x19e
      [  309.661743]                          kernel_init+0x9/0xf0
      [  309.661748]                          ret_from_fork+0x2e/0x40
      [  309.661752]     INITIAL USE at:
      [  309.661757]                      __lock_acquire+0x234/0x1b50
      [  309.661761]                      lock_acquire+0xc9/0x220
      [  309.661766]                      __mutex_lock+0x6e/0x990
      [  309.661771]                      mutex_lock_nested+0x16/0x20
      [  309.661775]                      get_online_cpus+0x61/0x80
      [  309.661780]                      __cpuhp_setup_state+0x44/0x170
      [  309.661785]                      page_alloc_init+0x23/0x3a
      [  309.661790]                      start_kernel+0x124/0x3fe
      [  309.661794]                      x86_64_start_reservations+0x2a/0x2c
      [  309.661799]                      x86_64_start_kernel+0x173/0x186
      [  309.661804]                      verify_cpu+0x0/0xfc
      [  309.661807]   }
      [  309.661813]   ... key      at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100
      [  309.661817]   ... acquired at:
      [  309.661821]    lock_acquire+0xc9/0x220
      [  309.661825]    __mutex_lock+0x6e/0x990
      [  309.661829]    mutex_lock_nested+0x16/0x20
      [  309.661833]    get_online_cpus+0x61/0x80
      [  309.661837]    _rcu_barrier+0x9f/0x160
      [  309.661841]    rcu_barrier+0x10/0x20
      [  309.661847]    netdev_run_todo+0x5f/0x310
      [  309.661852]    rtnl_unlock+0x9/0x10
      [  309.661856]    default_device_exit_batch+0x133/0x150
      [  309.661862]    ops_exit_list.isra.0+0x4d/0x60
      [  309.661866]    cleanup_net+0x1d8/0x2c0
      [  309.661872]    process_one_work+0x1f4/0x6d0
      [  309.661876]    worker_thread+0x49/0x4a0
      [  309.661881]    kthread+0x107/0x140
      [  309.661884]    ret_from_fork+0x2e/0x40
      
      [  309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 {
      [  309.661896]    HARDIRQ-ON-W at:
      [  309.661901]                     __lock_acquire+0x5e5/0x1b50
      [  309.661905]                     lock_acquire+0xc9/0x220
      [  309.661910]                     __mutex_lock+0x6e/0x990
      [  309.661914]                     mutex_lock_nested+0x16/0x20
      [  309.661919]                     _rcu_barrier+0x31/0x160
      [  309.661923]                     rcu_barrier+0x10/0x20
      [  309.661928]                     netdev_run_todo+0x5f/0x310
      [  309.661932]                     rtnl_unlock+0x9/0x10
      [  309.661936]                     default_device_exit_batch+0x133/0x150
      [  309.661941]                     ops_exit_list.isra.0+0x4d/0x60
      [  309.661946]                     cleanup_net+0x1d8/0x2c0
      [  309.661951]                     process_one_work+0x1f4/0x6d0
      [  309.661955]                     worker_thread+0x49/0x4a0
      [  309.661960]                     kthread+0x107/0x140
      [  309.661964]                     ret_from_fork+0x2e/0x40
      [  309.661968]    SOFTIRQ-ON-W at:
      [  309.661972]                     __lock_acquire+0x611/0x1b50
      [  309.661977]                     lock_acquire+0xc9/0x220
      [  309.661981]                     __mutex_lock+0x6e/0x990
      [  309.661986]                     mutex_lock_nested+0x16/0x20
      [  309.661990]                     _rcu_barrier+0x31/0x160
      [  309.661995]                     rcu_barrier+0x10/0x20
      [  309.661999]                     netdev_run_todo+0x5f/0x310
      [  309.662003]                     rtnl_unlock+0x9/0x10
      [  309.662008]                     default_device_exit_batch+0x133/0x150
      [  309.662013]                     ops_exit_list.isra.0+0x4d/0x60
      [  309.662017]                     cleanup_net+0x1d8/0x2c0
      [  309.662022]                     process_one_work+0x1f4/0x6d0
      [  309.662027]                     worker_thread+0x49/0x4a0
      [  309.662031]                     kthread+0x107/0x140
      [  309.662035]                     ret_from_fork+0x2e/0x40
      [  309.662039]    IN-RECLAIM_FS-W at:
      [  309.662043]                        __lock_acquire+0x638/0x1b50
      [  309.662048]                        lock_acquire+0xc9/0x220
      [  309.662053]                        __mutex_lock+0x6e/0x990
      [  309.662058]                        mutex_lock_nested+0x16/0x20
      [  309.662062]                        _rcu_barrier+0x31/0x160
      [  309.662067]                        rcu_barrier+0x10/0x20
      [  309.662089]                        i915_gem_shrink_all+0x33/0x40 [i915]
      [  309.662109]                        i915_drop_caches_set+0x141/0x150 [i915]
      [  309.662114]                        simple_attr_write+0xc7/0xe0
      [  309.662119]                        full_proxy_write+0x4f/0x70
      [  309.662124]                        __vfs_write+0x23/0x120
      [  309.662128]                        vfs_write+0xc6/0x1f0
      [  309.662133]                        SyS_write+0x44/0xb0
      [  309.662138]                        entry_SYSCALL_64_fastpath+0x1c/0xb1
      [  309.662142]    INITIAL USE at:
      [  309.662147]                    __lock_acquire+0x234/0x1b50
      [  309.662151]                    lock_acquire+0xc9/0x220
      [  309.662156]                    __mutex_lock+0x6e/0x990
      [  309.662160]                    mutex_lock_nested+0x16/0x20
      [  309.662165]                    _rcu_barrier+0x31/0x160
      [  309.662169]                    rcu_barrier+0x10/0x20
      [  309.662174]                    netdev_run_todo+0x5f/0x310
      [  309.662178]                    rtnl_unlock+0x9/0x10
      [  309.662183]                    default_device_exit_batch+0x133/0x150
      [  309.662188]                    ops_exit_list.isra.0+0x4d/0x60
      [  309.662192]                    cleanup_net+0x1d8/0x2c0
      [  309.662197]                    process_one_work+0x1f4/0x6d0
      [  309.662202]                    worker_thread+0x49/0x4a0
      [  309.662206]                    kthread+0x107/0x140
      [  309.662210]                    ret_from_fork+0x2e/0x40
      [  309.662214]  }
      [  309.662220]  ... key      at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780
      [  309.662225]  ... acquired at:
      [  309.662229]    check_usage_forwards+0x12b/0x130
      [  309.662233]    mark_lock+0x360/0x6f0
      [  309.662237]    __lock_acquire+0x638/0x1b50
      [  309.662241]    lock_acquire+0xc9/0x220
      [  309.662245]    __mutex_lock+0x6e/0x990
      [  309.662249]    mutex_lock_nested+0x16/0x20
      [  309.662253]    _rcu_barrier+0x31/0x160
      [  309.662257]    rcu_barrier+0x10/0x20
      [  309.662279]    i915_gem_shrink_all+0x33/0x40 [i915]
      [  309.662298]    i915_drop_caches_set+0x141/0x150 [i915]
      [  309.662303]    simple_attr_write+0xc7/0xe0
      [  309.662307]    full_proxy_write+0x4f/0x70
      [  309.662311]    __vfs_write+0x23/0x120
      [  309.662315]    vfs_write+0xc6/0x1f0
      [  309.662319]    SyS_write+0x44/0xb0
      [  309.662323]    entry_SYSCALL_64_fastpath+0x1c/0xb1
      
      [  309.662329]
                     stack backtrace:
      [  309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G        W       4.11.0-rc1-CI-CI_DRM_2333+ #1
      [  309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
      [  309.662348] Call Trace:
      [  309.662354]  dump_stack+0x67/0x92
      [  309.662359]  print_irq_inversion_bug.part.19+0x1a4/0x1b0
      [  309.662365]  check_usage_forwards+0x12b/0x130
      [  309.662369]  mark_lock+0x360/0x6f0
      [  309.662374]  ? print_shortest_lock_dependencies+0x1a0/0x1a0
      [  309.662379]  __lock_acquire+0x638/0x1b50
      [  309.662383]  ? __mutex_unlock_slowpath+0x3e/0x2e0
      [  309.662388]  ? trace_hardirqs_on+0xd/0x10
      [  309.662392]  ? _rcu_barrier+0x31/0x160
      [  309.662396]  lock_acquire+0xc9/0x220
      [  309.662400]  ? _rcu_barrier+0x31/0x160
      [  309.662404]  ? _rcu_barrier+0x31/0x160
      [  309.662409]  __mutex_lock+0x6e/0x990
      [  309.662412]  ? _rcu_barrier+0x31/0x160
      [  309.662416]  ? _rcu_barrier+0x31/0x160
      [  309.662421]  ? synchronize_rcu_expedited+0x35/0xb0
      [  309.662426]  ? _raw_spin_unlock_irqrestore+0x52/0x60
      [  309.662434]  mutex_lock_nested+0x16/0x20
      [  309.662438]  _rcu_barrier+0x31/0x160
      [  309.662442]  rcu_barrier+0x10/0x20
      [  309.662464]  i915_gem_shrink_all+0x33/0x40 [i915]
      [  309.662484]  i915_drop_caches_set+0x141/0x150 [i915]
      [  309.662489]  simple_attr_write+0xc7/0xe0
      [  309.662494]  full_proxy_write+0x4f/0x70
      [  309.662498]  __vfs_write+0x23/0x120
      [  309.662503]  ? rcu_read_lock_sched_held+0x75/0x80
      [  309.662507]  ? rcu_sync_lockdep_assert+0x2a/0x50
      [  309.662512]  ? __sb_start_write+0x102/0x210
      [  309.662516]  ? vfs_write+0x17d/0x1f0
      [  309.662520]  vfs_write+0xc6/0x1f0
      [  309.662524]  ? trace_hardirqs_on_caller+0xe7/0x200
      [  309.662529]  SyS_write+0x44/0xb0
      [  309.662533]  entry_SYSCALL_64_fastpath+0x1c/0xb1
      [  309.662537] RIP: 0033:0x7f507eac24a0
      [  309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
      [  309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0
      [  309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005
      [  309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c
      [  309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230
      [  309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0
      [  309.662572]  ? __this_cpu_preempt_check+0x13/0x20
      
      Fixes: 0eafec6d ("drm/i915: Enable lockless lookup of request tracking via RCU")
      Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: <stable@vger.kernel.org> # v4.9+
      Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.ukReviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      (cherry picked from commit bd784b7c)
      Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      Link: http://patchwork.freedesktop.org/patch/msgid/20170321144531.12344-1-chris@chris-wilson.co.uk
      3d3d18f0
    • Andrzej Hajda's avatar
      drm/exynos/dsi: make te-gpios optional · 22e098da
      Andrzej Hajda authored
      DSI forwards te-gpios interrupts to display controller, but if display
      controller works in HW-TRIGGER mode this interrupt is not necessary.
      Making te-gpios property optional allows to avoid generating spare
      interrupts.
      And also if panel device node of command mode panel device doesn't provide
      te-gpios property then the panel driver failed to probe. This was a critial
      issue.
      
      With this patch we can not only get rid of 60 interrupt callbacks per second
      but also fix the critial issues.
      Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      22e098da
    • Krzysztof Kozlowski's avatar
      drm/exynos: Print kernel pointers in a restricted form · 9cdf0ed2
      Krzysztof Kozlowski authored
      Printing raw kernel pointers might reveal information which sometimes we
      try to hide (e.g. with Kernel Address Space Layout Randomization).  Use
      the "%pK" format so these pointers will be hidden for unprivileged
      users.
      Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      9cdf0ed2
    • Andrzej Hajda's avatar
      drm/exynos/decon5433: fix software trigger mask · f07d9c28
      Andrzej Hajda authored
      The patch fixes copy/paste bug introduced during code refactoring.
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Fixes: b93c2e8b ("drm/exynos/decon5433: configure sysreg in case of hardware trigger")Fixes:
      Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      f07d9c28
    • Andrzej Hajda's avatar
      drm/exynos/fimd: signal frame done interrupt at front porch · 82a01783
      Andrzej Hajda authored
      VBLANK interrupt should be signalled as soon as scanout ends, front porch
      is the best moment.
      Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      82a01783
    • Andrzej Hajda's avatar
      drm/exynos/decon5433: signal frame done interrupt at front porch · f3cce673
      Andrzej Hajda authored
      DECON in case of video mode generates interrupt by default at start
      of vertical back porch. As this interrupt is used to generate VBLANK
      events more optimal point is start of vertical front porch.
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      f3cce673
    • Andrzej Hajda's avatar
      drm/exynos/decon5433: fix vblank event handling · 73488331
      Andrzej Hajda authored
      Current implementation of event handling assumes that vblank interrupt is
      always called at the right time. It is not true, it can be delayed due to
      various reasons. As a result different races can happen. The patch fixes
      the issue by using hardware frame counter present in DECON to serialize
      vblank and commit completion events.
      Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      73488331
    • Andrzej Hajda's avatar
      drm/exynos: move crtc event handling to drivers callbacks · a392276d
      Andrzej Hajda authored
      CRTC event is currently send with next vblank, or instantly in case crtc
      is being disabled. This approach usually works, but in corner cases it can
      result in premature event generation. Only device driver is able to verify
      if the event can be sent. This patch is a first step in that direction - it
      moves event handling to the drivers.
      Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      a392276d
    • Krzysztof Kozlowski's avatar
      drm/exynos: Remove support for Exynos4415 (SoC not supported anymore) · 6bdc92ee
      Krzysztof Kozlowski authored
      Support for Exynos4415 is going away because there are no internal nor
      external users.
      
      Since commit 46dcf0ff ("ARM: dts: exynos: Remove exynos4415.dtsi"),
      the platform cannot be instantiated so remove also the drivers.
      Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
      Acked-by: default avatarKukjin Kim <kgene@kernel.org>
      Acked-by: default avatarRob Herring <robh@kernel.org>
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      6bdc92ee
    • Dan Carpenter's avatar
      drm/exynos/decon5433: & vs | typo · ac7ce78b
      Dan Carpenter authored
      "&" was obviously intended instead of "|".  The original condition is
      always true.
      
      Fixes: b93c2e8b ("drm/exynos/decon5433: configure sysreg in case of hardware trigger")
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarInki Dae <inki.dae@samsung.com>
      ac7ce78b
  5. 20 Mar, 2017 6 commits
    • Jani Nikula's avatar
      Merge tag 'gvt-fixes-2017-03-17' of https://github.com/01org/gvt-linux into drm-intel-fixes · f13eed7a
      Jani Nikula authored
      gvt-fixes-2017-03-17
      
      - force_nonpriv reg handling in cmd parser (Yan)
      - gvt error message cleanup (Tina)
      - i915_wait_request fix from Chris
      - KVM srcu warning fix (Changbin)
      - ensure shadow ctx pinned (Chuanxiao)
      - critical gvt scheduler interval time fix (Zhenyu)
      - etc.
      Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      f13eed7a
    • Linus Torvalds's avatar
      Linux 4.11-rc3 · 97da3854
      Linus Torvalds authored
      97da3854
    • Linus Torvalds's avatar
      mm/swap: don't BUG_ON() due to uninitialized swap slot cache · 452b94b8
      Linus Torvalds authored
      This BUG_ON() triggered for me once at shutdown, and I don't see a
      reason for the check.  The code correctly checks whether the swap slot
      cache is usable or not, so an uninitialized swap slot cache is not
      actually problematic afaik.
      
      I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
      I'm not sure why that seemingly pointless check was there.  I suspect
      the real fix is to just remove it entirely, but for now we'll warn about
      it but not bring the machine down.
      
      Cc: "Huang, Ying" <ying.huang@intel.com>
      Cc: Tim Chen <tim.c.chen@linux.intel.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      452b94b8
    • Linus Torvalds's avatar
      Merge tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · a07a6e41
      Linus Torvalds authored
      Pull more powerpc fixes from Michael Ellerman:
       "A couple of minor powerpc fixes for 4.11:
      
         - wire up statx() syscall
      
         - don't print a warning on memory hotplug when HPT resizing isn't
           available
      
        Thanks to: David Gibson, Chandan Rajendra"
      
      * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
        powerpc/pseries: Don't give a warning when HPT resizing isn't available
        powerpc: Wire up statx() syscall
      a07a6e41
    • Linus Torvalds's avatar
      Merge branch 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux · 4571bc5a
      Linus Torvalds authored
      Pull parisc fixes from Helge Deller:
      
       - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
         modules with CONFIG_MODVERSIONS.
      
       - Dave Anglin optimized the cache flushing for vmap ranges.
      
       - Arvind Yadav provided a fix for a potential NULL pointer dereference
         in the parisc perf code (and some code cleanups).
      
       - I wired up the new statx system call, fixed some compiler warnings
         with the access_ok() macro and fixed shutdown code to really halt a
         system at shutdown instead of crashing & rebooting.
      
      * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
        parisc: Fix system shutdown halt
        parisc: perf: Fix potential NULL pointer dereference
        parisc: Avoid compiler warnings with access_ok()
        parisc: Wire up statx system call
        parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
        parisc: support R_PARISC_SECREL32 relocation in modules
      4571bc5a
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · 8aa34172
      Linus Torvalds authored
      Pull SCSI target fixes from Nicholas Bellinger:
       "The bulk of the changes are in qla2xxx target driver code to address
        various issues found during Cavium/QLogic's internal testing (stable
        CC's included), along with a few other stability and smaller
        miscellaneous improvements.
      
        There are also a couple of different patch sets from Mike Christie,
        which have been a result of his work to use target-core ALUA logic
        together with tcm-user backend driver.
      
        Finally, a patch to address some long standing issues with
        pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
        which will make folks using physical (or virtual) magnetic tape happy"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
        qla2xxx: Update driver version to 9.00.00.00-k
        qla2xxx: Fix delayed response to command for loop mode/direct connect.
        qla2xxx: Change scsi host lookup method.
        qla2xxx: Add DebugFS node to display Port Database
        qla2xxx: Use IOCB interface to submit non-critical MBX.
        qla2xxx: Add async new target notification
        qla2xxx: Export DIF stats via debugfs
        qla2xxx: Improve T10-DIF/PI handling in driver.
        qla2xxx: Allow relogin to proceed if remote login did not finish
        qla2xxx: Fix sess_lock & hardware_lock lock order problem.
        qla2xxx: Fix inadequate lock protection for ABTS.
        qla2xxx: Fix request queue corruption.
        qla2xxx: Fix memory leak for abts processing
        qla2xxx: Allow vref count to timeout on vport delete.
        tcmu: Convert cmd_time_out into backend device attribute
        tcmu: make cmd timeout configurable
        tcmu: add helper to check if dev was configured
        target: fix race during implicit transition work flushes
        target: allow userspace to set state to transitioning
        target: fix ALUA transition timeout handling
        ...
      8aa34172
  6. 19 Mar, 2017 14 commits