The IIO_LIGHT channel was not marked as being a processed_val despite
clearly being in lux.

The IIO_INTENSITY channel reads were dependent on channel and that isn't
specified for either adc (as they now use modifiers).  Hence use the
modifier instead.
Reported-by: Jon Brenner <jbrenner@taosinc.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It was marked as BROKEN back in 2008. It is because the tty handling
in the driver is really broken.

There was some activity in January 2012 to fix the driver, but the
patch was commented to be bogus:
  https://lkml.org/lkml/2012/1/29/160
and we have not heard back from the author since then:
  https://lkml.org/lkml/2012/3/28/412

So since nobody stepped in and rewrote the driver, it is time to move
it out of line now. And drop it some time later if nobody comes up
with patches to fix the driver in staging.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andrea Shepard <andrea@persephoneslair.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spatch http://coccinelle.lip6.fr/rules/array.cocci did these.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Given these drivers only try to add the trigger if a valid
irq is present it is clearer to check the same condition when
deciding whether to remove it on a later trigger.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checking indio_dev->modes is uggly and not symmetric with the conditions
on whether triggers are allowed in the first place.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When moving over to the new sw_ring_preenable I managed to add
this callback to only one of the two iio_info structures. As
such only some devices will currently work.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I have no idea how I managed to munge the previous
patch related to this.  Sorry all.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3a0db721

    "TTY: serial, move 68360 driver to staging"

did so because the driver had remained broken since 2008.  It also
added this text to the TODO file:

   "If no one steps up to adopt any of these drivers, they will
    be removed in the 3.4 release."

A quick search on the internet doesn't reveal anyone actively
trying to update/fix this driver, so follow through on the above
and remove it from the pending 3.4 release.

Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For now just implementing the exporting APIs, not yet importing.  And
kmap is rejected on tiled buffers (although the usefulness of that seems
questionable, but could be added later if needed).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbdux_attach_common() prints two messages via dev_info() that shows a
device has been attached.  The first of these messages includes an index
into a static array that the function determines by pointer subtraction,
assuming the pointer passed to the function points to an element of the
array.  Dan Carpenter pointed out that this was kind of ugly.  Since the
dev_info() that prints the array index doesn't add anything useful
(since no other messages print the array index and nothing else uses
it), let's just get rid of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the usbdux driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the amplc_pci224 driver to use the new attach_pci() hook in
struct comedi_driver to auto-configure probed PCI devices.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi_auto_config() only needs to consider a single struct
comedi_driver object, but it currently calls comedi_device_attach()
which looks at all struct comedi_driver objects registered with the
Comedi core.

Instead, call the recently added comedi_auto_config_helper() with a new
wrapper comedi_auto_config_wrapper() to mimic the effect of
comedi_device_attach() for a single struct comedi_driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pass a pointer to the struct comedi_driver to comedi_auto_config()
instead of the driver name.  comedi_auto_config() will be changed to
make use of this.  It currently calls comedi_device_attach() which
examines the whole list of struct comedi_driver objects.  It will be
changed to restrict itself to just the supplied struct comedi_driver
object.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Comedi auto-configuration mechanism used to bind hardware devices to
comedi devices automatically is pretty kludgy.  It fakes a "manual"
configuration of the comedi device as though the COMEDI_DEVCONFIG ioctl
(or the 'comedi_config' utility) were used.  In particular, the
low-level comedi driver's '->attach()' routine is called with a pointer
to the struct comedi_device being attached and a pointer to a 'struct
devconfig' containing a device name string and a few integer options to
help the attach routine locate the device being attached.  In the case
of PCI devices, these integer options are the PCI bus and slot numbers.
In the case of USB devices, there are no integer options and it relies
more on pot luck to attach the correct device.

This patch adds a couple of bus-type-specific attach routine hooks to
the struct comedi_driver, which a low-level driver can optionally fill
in if it supports auto-configuration.

A low-level driver that supports auto-configuration of {PCI,USB} devices
calls the existing comedi_{pci,usb}_auto_config() when it wishes to
auto-configure a freshly probed device (maybe after loading firmware).
This will call the new '->attach_{pci,usb}()' hook if the driver has
defined it, otherwise it will fall back to calling the '->attach()' hook
as before.  The '->attach_{pci,usb}()' hook gets a pointer to the struct
comedi_device and a pointer to the struct {pci_dev,usb_interface} and
can figure out the {PCI,USB} device details for itself.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Split the post-config part of comedi_device_attach() into new function
comedi_device_postconfig() and rearrange the rest of the function a bit.

The new comedi_device_postconfig() function will be called by some new
bus-type-specific auto-attach functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi_usb_auto_config() and comedi_usb_auto_unconfig() functions
currently take a 'struct usb_device *'.  It makes more sense to pass a
'struct usb_interface *' to allow for composite USB devices.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi_auto_config() associates a Comedi minor device number with an
auto-configured hardware device and comedi_auto_unconfig() disassociates
it.  Currently, these use the hardware device's private data pointer to
point to some allocated storage holding the minor device number.  This
is a bit of a waste of the hardware device's private data pointer,
preventing it from being used for something more useful by the low-level
comedi device drivers.  For example, it would make more sense if
comedi_usb_auto_config() was passed a pointer to the struct
usb_interface instead of the struct usb_device, but this cannot be done
currently because the low-level comedi drivers already use the private
data pointer in the struct usb_interface for something more useful.

This patch stops the comedi core hijacking the hardware device's private
data pointer.  Instead, comedi_auto_config() stores a pointer to the
hardware device's struct device in the struct comedi_device_file_info
associated with the minor device number, and comedi_auto_unconfig()
calls new function comedi_find_board_minor() to recover the minor device
number associated with the hardware device.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the functions that acquire the comedi_file_info_table_lock
spin-lock need to disable interrupts.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi_pci_auto_config() and comedi_usb_auto_config() functions
currently take a board name parameter which is actually a driver name
parameter.  Replace it with a pointer to the struct comedi_driver.  This
will allow comedi_pci_auto_config() and comedi_usb_auto_config() to call
bus-type-specific auto-configuration hooks in the struct comedi_driver
if they exist (they don't yet).  The idea is that these
bus-type-specific auto-configuration hooks won't have to search the bus
for the device being auto-configured like 'attach()' hook has to.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The das08 driver supports both ISA and PCI cards, but currently is
configured outside the ISA and PCI comedi driver sections.  The module
is also used by the das08_cs driver.  This patch splits the
configuration to make the ISA and PCI parts separately selectable, and
changes the driver to only include the selected ISA and/or PCI board
types.  Also, if neither the ISA or PCI parts are selected, and the
module is only needed for the das08_cs driver, don't register the driver
as a comedi driver as it doesn't have any boards to support.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The amplc_pc263 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured.  This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.

Also fix a conditionally mismatched brace in pc263_detach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The amplc_pc236 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured.  This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The amplc_dio200 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured.  This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DMA functionality fails to work on little endian processors, such as
found on x86 based platforms. The DMA engine copies the link list
descriptors from memory into big endian registers. On little endian systems
this results in the values being byte swapped. This patch uses standard
kernel functionality to ensure that the descriptors are stored in big
endian format.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DMA functionality fails to work on some Intel based platforms. Some
recent Intel platforms have an IOMMU. Transferring the DMA descriptors,
which were mapped using virt_to_phys(), failed. This patch updates the
driver to use dma_map_single().
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Eighth patch in a series to fix coding style in IPv6Protocol.c
This patch removes some uneeded braces around single line if/for statements
Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Seventh patch in a series of patches to fix coding style in IPv6Protocol.c
this patch makes the file mostly conform to the 80 char line limit
there are some exceptions to this rule I have left in to aid readability
Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sixth in a series of patche to fix coding style in IPv6Protocol.c
This patch changes the format of if statments from:
	if (#VALUE == variable)
to:
	if (variable == #VALUE)
Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fith in a series of patche to fi coding syle in IPv6Protocol.c
Fixed trailing whitespaces and replaced spaces with tabs
in code indents
Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fourth patch in a series of patches to fix  coding style in IPv6Protocol.c
Continuation of fixing spacing arount ','
Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Third in a series of patches to fix coding style in Ipv6Protocol.c
This patch fixes the spacing around ',' in function calls.
Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Second in a set of patches to fix coding style in IPv6Protocol.c
This patch changes the commenting style
Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The first in a series of 8 patches to fix IPv6Protocol.c
This first patch fixes formatting issues for braced statements
(e.g. if/for/while)
Signed-off-by: Max Tottenham <mtottenh@gmail.com>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes some typos that I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes some typos that I found while reading.  Note: I
was told to hold off sending anything until *rc1 so hopefully now its
alright.(wasnt sure what kernel *rc*)
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Collect spelling typo in multiple files within staging directory.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spellings within wlags49_h2
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>