The only enum that was missing xrefs at frontend.h is fe_type.
Add xrefs for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use a table for the delivery systems. The table is organized
by the type (cable, satellite, terrestrial) and shows what
standards are not fully implemented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of using a program listing, use a table and make clearer
what each define means.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The table were documented at the legacy ioctl call. Move it
to the DVBv5 ioctl, and add a cross ref link on the legacy
section.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Putting it into a table allows to comment each possible
values, with makes more clear what field means.

Also, it allows to do cross-references with the frontend.h.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Those data were retrieved by looking at A/153: ATSC Mobile DTV
Standard and guessing what makes more sense to each field.

Cc: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The ATSC M/H specific properties are not properly documented.
This became crearer when converting the existing data into
tables and adding cross references.

For now, just add placeholders, as a further investigation
about the meaning of each parameter is required.

Cc: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

By cut-and-paste mistake, TRANSMISSION_MODE_AUTO were documented
twice, one at the wrong place.

Remove the wrong one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

enum fe_bandwidth is documented at the frontend legacy xml
file.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The DTMB time interleaving was not properly documented. Add
a documentation for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

There are lots of enums that are defined at dvbproperty.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

enum fe_sec_voltage is documented together with FE_SET_VOLTAGE.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

enum fe_sec_tone_mode is documented together with FE_SET_TONE.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

enum fe_status is documented together with FE_READ_STATUS.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

enum fe_sec_mini_cmd is documented together with
FE_DISEQC_SEND_BURST.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

enum fe_caps is documented at FE_GET_INFO ioctl. Add xrefs
for each entry there. This makes the hyperlinks at frontend.h
to go directly to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

In order to be sure that all enum definitions will be documented,
let's parse the enum values and add xref links to them.

Lots of missing references will be risen as we miss adding
id's to those symbols at the documentation. Next patches will
fix this.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix this compiler warning by allocating a structure to read the eeprom instead
of doing it on the stack and worse: the eeprom array is static, so that can
cause problems if there are multiple cx231xx instances.

cx231xx-cards.c: In function 'cx231xx_card_setup':
cx231xx-cards.c:1110:1: warning: the frame size of 2064 bytes is larger than 2048 bytes [-Wframe-larger-than=]
 }
 ^

I did consider removing the code altogether since the result is actually
not used at the moment, but I decided against it since it is used in other
drivers and someone might want to start using it in this driver as well. And
then it is useful that the code is already there.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The detect_cvt/gtf() now supports timing calculations for interlaced
format.
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Extend detect_cvt/gtf API to indicate the format type (interlaced
or progressive). In case of interlaced, the vertical front and back
porch and vsync values for both (odd,even) fields are considered to
derive image height. Populated vsync, vertical front, back porch
values in bt timing structure for even and odd fields and updated
the flags appropriately.

Also modified the functions calling the detect_cvt/gtf(). As of now
these functions are calling detect_cvt/gtf() with interlaced flag
set to false.

Cc: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The v4l2_print_dv_timings() didn't log the interlaced format correctly. The timings
for the bottom field weren't logged and the fields per second value was half of what
it should have been.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Currently, in gtf hblank calculations, the rounding is used twice,
one at intermediate division and one at final state where hblank
is rounded to nearest multiple of twice cell granularity. This
error got introduced in 'commit d7ed5a3d ("[media]
v4l2-dv-timings: fix rounding in hblank and hsync calculation"),
where it missed combining the rounding step. Correcting the same
in this patch.
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Log the alternate gamma state and the HDMI colorspace that the adv
device detected.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The logging of the saturator status was wrong due to an incorrect
condition.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support for logging the detected InfoFrames for the adv76xx. Helps in
debugging what is actually received on the HDMI link.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The adv7511 sets up InfoFrames that are used when transmitting video.
Log the contents of those InfoFrames so it is possible to see exactly what
the transmitter is sending.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Currently this driver mixes u8/u32 and uint8_t/uint32_t. Standardize on
u8/u32.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Currently this driver mixes u8/u16 and uint8_t/uint16_t. Standardize on
u8/u16.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support for the missing VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF
ioctls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

This was never added for some reason, so add it now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

We must return -ENODEV error on case probe() fails to detect chip.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

We must return -ENODEV error on case probe() fails to detect chip.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

We need to set some error codes here.

Fixes: f01919e8 ('[media] m88ds3103: add I2C client binding')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As reminded by Jonathan, several places where emphasys
role="tt" were used are actually trying to change the font to
monospaced.

We do that, on other places, by using the constant tag.

So, use it here too.
Reported-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Some minor English syntax fixes.
Reported-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

We don't want to announce anything, but to add a note ;)
So:
	notice  -> note
	notided -> noted

While here, fix another typo at media_api.tmpl:
	with -> which
Reported-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

According with the docs at docbook.org, no backward compatible
changes were done between 4.2 and 4.5 schemas. Some fixes were
added, together with new features. So, let's use the latest
4.x schema.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Define the usage of UTF-8 encoding and let clear that the document
is in English.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVB network API was not documented. There are just some
placeholders there.

Replace it by a proper documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

If userspace passed the invalid buffer type 0 to the kernel, then the
kernel log would show 'type=(null)' since there was no string defined
for type 0. Fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>