* pm-cpuidle:
  cpuidle: record state entry rejection statistics
  cpuidle: psci: Allow PM domain to be initialized even if no OSI mode
  firmware: psci: Extend psci_set_osi_mode() to allow reset to PC mode
  ACPI: processor: Print more information when acpi_processor_evaluate_cst() fails
  cpuidle: tegra: Correctly handle result of arm_cpuidle_simple_enter()

* pm-devfreq:
  PM / devfreq: tegra30: Improve initial hardware resetting
  PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
  PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
  PM / devfreq: Add devfreq_get_devfreq_by_node function

* pm-cpufreq: (30 commits)
  cpufreq: stats: Fix string format specifier mismatch
  arm: disable frequency invariance for CONFIG_BL_SWITCHER
  cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
  cpufreq: stats: Add memory barrier to store_reset()
  cpufreq: schedutil: Simplify sugov_fast_switch()
  cpufreq: Move traces and update to policy->cur to cpufreq core
  cpufreq: stats: Enable stats for fast-switch as well
  cpufreq: stats: Mark few conditionals with unlikely()
  cpufreq: stats: Remove locking
  cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
  arch_topology, arm, arm64: define arch_scale_freq_invariant()
  arch_topology, cpufreq: constify arch_* cpumasks
  cpufreq: report whether cpufreq supports Frequency Invariance (FI)
  cpufreq: move invariance setter calls in cpufreq core
  arch_topology: validate input frequencies to arch_set_freq_scale()
  cpufreq: qcom: Don't add frequencies without an OPP
  cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC
  cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size
  cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code
  dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible
  ...

Fix following warning:

drivers/cpufreq/cpufreq_stats.c:63:10: warning: %d in format string (no.
1) requires 'int' but the argument type is 'unsigned int'

Fixes: 40c3bd4c ("cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

big.LITTLE switching complicates the setting of a correct cpufreq-based
frequency invariance scale factor due to (as observed in
drivers/cpufreq/vexpress-spc-cpufreq.c):
 - Incorrect current and maximum frequencies as a result of the
   exposure of a virtual frequency table to the cpufreq core,
 - Missed updates as a result of asynchronous frequency adjustments
   caused by frequency changes in other CPU pairs.

Given that its functionality is atypical in regards to frequency
invariance and this is an old technology, disable frequency
invariance for when big.LITTLE switching is configured in to prevent
incorrect scale setting.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Compared to other arch_* functions, arch_set_freq_scale() has an atypical
weak definition that can be replaced by a strong architecture specific
implementation.

The more typical support for architectural functions involves defining
an empty stub in a header file if the symbol is not already defined in
architecture code. Some examples involve:
 - #define arch_scale_freq_capacity	topology_get_freq_scale
 - #define arch_scale_freq_invariant	topology_scale_freq_invariant
 - #define arch_scale_cpu_capacity	topology_get_cpu_scale
 - #define arch_update_cpu_topology	topology_update_cpu_topology
 - #define arch_scale_thermal_pressure	topology_get_thermal_pressure
 - #define arch_set_thermal_pressure	topology_set_thermal_pressure

Bring arch_set_freq_scale() in line with these functions by renaming it to
topology_set_freq_scale() in the arch topology driver, and by defining the
arch_set_freq_scale symbol to point to the new function for arm and arm64.

While there are other users of the arch_topology driver, this patch defines
arch_set_freq_scale for arm and arm64 only, due to their existing
definitions of arch_scale_freq_capacity. This is the getter function of the
frequency invariance scale factor and without a getter function, the
setter function - arch_set_freq_scale() has not purpose.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com> (BL_SWITCHER and topology parts)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

There is nothing to prevent the CPU or the compiler from reordering
the writes to stats->reset_time and stats->reset_pending in
store_reset(), in which case the readers of stats->reset_time may see
a stale value.  Moreover, on 32-bit arches the write to reset_time
cannot be completed in one go, so the readers of it may see a
partially updated value in that case.

To prevent that from happening, add a write memory barrier between
the writes to stats->reset_time and stats->reset_pending in
store_reset() and corresponding read memory barrier in the
readers of stats->reset_time.

Fixes: 40c3bd4c ("cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Drop a redundant local variable definition from sugov_fast_switch()
and rearrange the code in there to avoid the redundant logical
negation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Pull ARM cpufreq updates for 5.10-rc1 from Viresh Kumar:

"- STI cpufreq driver updates to allow new hardware (Alain Volmat).

 - Minor tegra driver fixes around initial frequency mismatch warnings (Jon
   Hunter).

 - dev_err simplification for s5pv210 driver (Krzysztof Kozlowski).

 - Qcom driver updates to allow new hardware and minor cleanup (Manivannan
   Sadhasivam and Matthias Kaehlcke).

 - Add missing MODULE_DEVICE_TABLE for armada driver (Pali Rohár).

 - Improved defer-probe handling in cpufreq-dt driver (Stephan Gerhold).

 - Call dev_pm_opp_of_remove_table() unconditionally for imx driver (Viresh
   Kumar)."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: qcom: Don't add frequencies without an OPP
  cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC
  cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size
  cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code
  dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible
  cpufreq: qcom-hw: Make use of cpufreq driver_data for passing pdev
  cpufreq: armada-37xx: Add missing MODULE_DEVICE_TABLE
  cpufreq: arm: Kconfig: add CPUFREQ_DT depend for STI CPUFREQ
  cpufreq: dt-platdev: Blacklist st,stih418 SoC
  cpufreq: sti-cpufreq: add stih418 support
  cpufreq: s5pv210: Use dev_err instead of pr_err in probe
  cpufreq: s5pv210: Simplify with dev_err_probe()
  cpufreq: tegra186: Fix initial frequency
  cpufreq: dt: Refactor initialization to handle probe deferral properly
  opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()
  cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
  opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER

The cpufreq core handles the updates to policy->cur and recording of
cpufreq trace events for all the governors except schedutil's fast
switch case.

Move that as well to cpufreq core for consistency and readability.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Now that all the blockers are gone for enabling stats in fast-switching
case, enable it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Since this will be part of the scheduler's hotpath in some cases, use
unlikely() for few of the obvious conditionals.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The locking isn't required anymore as stats can get updated only from
one place at a time. Remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In order to prepare for lock-less stats update, add support to defer any
updates to it until cpufreq_stats_record_transition() is called.

The stats were updated from two places earlier:

- show_time_in_state(): This can be easily deferred, all we need is to
  calculate the delta duration again in this routine to show the current
  state's time-in-state.

- store_reset(): This is a bit tricky as we need to clear the stats
  here and avoid races with simultaneous call to
  cpufreq_stats_record_transition().

Fix that by deferring the reset of the stats (within the code) to the
next call to cpufreq_stats_record_transition(), but since we need to
keep showing the right stats until that time, we capture the reset
time and account for the time since last time reset was called until
the time cpufreq_stats_record_transition() update the stats.

User space will continue seeing the stats correctly, everything will
be 0 after the stats are reset, apart from the time-in-state of the
current state, until the time a frequency switch happens.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull opertaing performance points (OPP) framework fixes for 5.10-rc1
from Viresh Kumar:

"- Return -EPROBE_DEFER properly from dev_pm_opp_get_opp_table()
   (Stephan Gerhold).

 - Minor cleanups around required-opps (Stephan Gerhold).

 - Extends opp-supported-hw property to contain multiple versions
   (Viresh Kumar).

 - Multiple cleanups around dev_pm_opp_attach_genpd() (Viresh Kumar).

 - Multiple fixes, cleanups in the OPP core for overall better design
   (Viresh Kumar)."

* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  opp: Allow opp-level to be set to 0
  opp: Prevent memory leak in dev_pm_opp_attach_genpd()
  ARM: tegra: Pass multiple versions in opp-supported-hw property
  opp: Allow opp-supported-hw to contain multiple versions
  dt-bindings: opp: Allow opp-supported-hw to contain multiple versions
  opp: Set required OPPs in reverse order when scaling down
  opp: Reduce code duplication in _set_required_opps()
  opp: Drop unnecessary check from dev_pm_opp_attach_genpd()
  opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()
  opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
  opp: Remove _dev_pm_opp_find_and_remove_table() wrapper
  opp: Split out _opp_set_rate_zero()
  opp: Reuse the enabled flag in !target_freq path
  opp: Rename regulator_enabled and use it as status of all resources

* pm-cpuidle:
  cpuidle: record state entry rejection statistics
  cpuidle: psci: Allow PM domain to be initialized even if no OSI mode
  firmware: psci: Extend psci_set_osi_mode() to allow reset to PC mode
  ACPI: processor: Print more information when acpi_processor_evaluate_cst() fails
  cpuidle: tegra: Correctly handle result of arm_cpuidle_simple_enter()

Pull kvm fixes from Paolo Bonzini:
 "Two bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: update PFEC_MASK/PFEC_MATCH together with PF intercept
  KVM: arm64: Restore missing ISB on nVHE __tlb_switch_to_guest

Pull xen fix from Juergen Gross:
 "Fix a regression introduced in 5.9-rc3 which caused a system running
  as fully virtualized guest under Xen to crash when using legacy
  devices like a floppy"

* tag 'for-linus-5.9b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: don't use chip_data for legacy IRQs

Pull USB/PHY fixes from Greg KH:
 "Here are some small USB and PHY driver fixes for 5.9-rc8

  The PHY driver fix resolves an issue found by Dan Carpenter for a
  memory leak.

  The USB fixes fall into two groups:

   - usb gadget fix from Bryan that is a fix for a previous security fix
     that showed up in in-the-wild testing

   - usb core driver matching bugfixes. This fixes a bug that has
     plagued the both the usbip driver and syzbot testing tools this -rc
     release cycle. All is now working properly so usbip connections
     will work, and syzbot can get back to fuzzing USB drivers properly.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usbcore/driver: Accommodate usbip
  usbcore/driver: Fix incorrect downcast
  usbcore/driver: Fix specific driver selection
  Revert "usbip: Implement a match function to fix usbip"
  USB: gadget: f_ncm: Fix NDP16 datagram validation
  phy: ti: am654: Fix a leak in serdes_am654_probe()

Pull i2c fixes from Wolfram Sang:
 "Some more driver fixes for i2c"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: npcm7xx: Clear LAST bit after a failed transaction.
  i2c: cpm: Fix i2c_ram structure
  i2c: i801: Exclude device from suspend direct complete optimization

Pull input fixes from Dmitry Torokhov:
 "A couple more driver quirks, now enabling newer trackpoints from
  Synaptics for real"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add nopnp quirk for Acer Aspire 5 A515
  Input: trackpoint - enable Synaptics trackpoints

One of the entries has three fields "mistake||correction||correction"
rather than the expected two fields "mistake||correction".  Fix it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memalloc_nocma_{save/restore} APIs can be used to skip page allocation
on CMA area, but, there is a missing case and the page on CMA area could
be allocated even if APIs are used.  This patch handles this case to fix
the potential issue.

For now, these APIs are used to prevent long-term pinning on the CMA
page.  When the long-term pinning is requested on the CMA page, it is
migrated to the non-CMA page before pinning.  This non-CMA page is
allocated by using memalloc_nocma_{save/restore} APIs.  If APIs doesn't
work as intended, the CMA page is allocated and it is pinned for a long
time.  This long-term pin for the CMA page causes cma_alloc() failure
and it could result in wrong behaviour on the device driver who uses the
cma_alloc().

Missing case is an allocation from the pcplist.  MIGRATE_MOVABLE pcplist
could have the pages on CMA area so we need to skip it if ALLOC_CMA
isn't specified.

Fixes: 8510e69c (mm/page_alloc: fix memalloc_nocma_{save/restore} APIs)
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/1601429472-12599-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The routine that applies debug flags to the kmem_cache slabs
inadvertantly prevents non-debug flags from being applied to those
same objects.  That is, if slub_debug=<flag>,<slab> is specified,
non-debugged slabs will end up having flags of zero, and the slabs
may be unusable.

Fix this by including the input flags for non-matching slabs with the
contents of slub_debug, so that the caches are created as expected
alongside any debugging options that may be requested.  With this, we
can remove the check for a NULL slub_debug_string, since it's covered
by the loop itself.

Fixes: e17f1dfb ("mm, slub: extend slub_debug syntax for multiple blocks")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kvmarm-fixes-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm64 fixes for 5.9, take #3

- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems

The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of
the #PF intercept bit in the exception bitmap when they do not match.
This means that, if PFEC_MASK and/or PFEC_MATCH are set, the
hypervisor can get a vmexit for #PF exceptions even when the
corresponding bit is clear in the exception bitmap.

This is unexpected and is promptly detected by a WARN_ON_ONCE.
To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept
is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr).
Reported-by: Qian Cai <cai@redhat.com&gt;>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull pin control fixes from Linus Walleij:
 "Some pin control fixes here. All of them are driver fixes, the Intel
  Cherryview being the most interesting one.

   - Fix a mux problem for I2C in the MVEBU driver.

   - Fix a really hairy inversion problem in the Intel Cherryview
     driver.

   - Fix the register for the sdc2_clk in the Qualcomm SM8250 driver.

   - Check the virtual GPIO boot failur in the Mediatek driver"

* tag 'pinctrl-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: check mtk_is_virt_gpio input parameter
  pinctrl: qcom: sm8250: correct sdc2_clk
  pinctrl: cherryview: Preserve CHV_PADCTRL1_INVRXTX_TXDATA flag on GPIOs
  pinctrl: mvebu: Fix i2c sda definition for 98DX3236

Pull PCI fixes from Bjorn Helgaas:

 - Fix rockchip regression in rockchip_pcie_valid_device() (Lorenzo
   Pieralisi)

 - Add Pali Rohár as aardvark PCI maintainer (Pali Rohár)

* tag 'pci-v5.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Add Pali Rohár as aardvark PCI maintainer
  PCI: rockchip: Fix bus checks in rockchip_pcie_valid_device()

Pull SCSI fixes from James Bottomley:
 "Two patches in driver frameworks. The iscsi one corrects a bug induced
  by a BPF change to network locking and the other is a regression we
  introduced"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()
  scsi: target: Fix lun lookup for TARGET_SCF_LOOKUP_LUN_FROM_TAG case

Pull io_uring fixes from Jens Axboe:

 - fix for async buffered reads if read-ahead is fully disabled (Hao)

 - double poll match fix

 - ->show_fdinfo() potential ABBA deadlock complaint fix

* tag 'io_uring-5.9-2020-10-02' of git://git.kernel.dk/linux-block:
  io_uring: fix async buffered reads when readahead is disabled
  io_uring: fix potential ABBA deadlock in ->show_fdinfo()
  io_uring: always delete double poll wait entry on match

Pull block fix from Jens Axboe:
 "Single fix for a ->commit_rqs failure case"

* tag 'block-5.9-2020-10-02' of git://git.kernel.dk/linux-block:
  blk-mq: call commit_rqs while list empty but error happen

Pull epoll fixes from Al Viro:
 "Several race fixes in epoll"

* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ep_create_wakeup_source(): dentry name can change under you...
  epoll: EPOLL_CTL_ADD: close the race in decision to take fast path
  epoll: replace ->visited/visited_list with generation count
  epoll: do not insert into poll queues until all sanity checks are done

Pull RISC-V fixes from Palmer Dabbelt:
 "Two fixes for this week:

   - The addition of a symbol export for clint_time_val, which has been
     inlined into some timex functions and can be used by drivers.

   - A fix to avoid calling get_cycles() before the timers have been
     probed.

  These both only effect !MMU systems"

* tag 'riscv-for-linus-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Check clint_time_val before use
  clocksource: clint: Export clint_time_val for modules

Pull btrfs fixes from David Sterba:
 "Two more fixes.

  One is for a lockdep warning/lockup (also caught by syzbot), that one
  has been seen in practice. Regarding the other syzbot reports
  mentioned last time, they don't seem to be urgent and reliably
  reproducible so they'll be fixed later.

  The second fix is for a potential corruption when device replace
  finishes and the in-memory state of trim is not copied to the new
  device"

* tag 'for-5.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix filesystem corruption after a device replace
  btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks
  btrfs: move btrfs_scratch_superblocks into btrfs_dev_replace_finishing

Pull power management fixes from Rafael Wysocki:
 "These fix one more issue related to the recent RCU-lockdep changes, a
  typo in documentation and add a missing return statement to
  intel_pstate.

  Specifics:

   - Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
     Hansson)

   - Fix typo in the PM documentation (Yoann Congal)

   - Add return statement that is missing after recent changes in the
     intel_pstate driver (Zhang Rui)"

* tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ARM: imx6q: Fixup RCU usage for cpuidle
  Documentation: PM: Fix a reStructuredText syntax error
  cpufreq: intel_pstate: Fix missing return statement

Pull IIO fixes from Greg KH:
 "Here are two small IIO driver fixes for 5.9-rc8 that resolve some
  reported issues:

   - driver name fixed in one driver

   - device name typo fixed

  Both have been in linux-next for a while with no reported problems"

* tag 'staging-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: adc: qcom-spmi-adc5: fix driver name
  iio: adc: ad7124: Fix typo in device name

Pull GPIO fixes from Linus Walleij:
 "Some late GPIO fixes for the v5.9 series:

   - Fix compiler warnings on the OMAP when PM is disabled

   - Clear the interrupt when setting edge sensitivity on the Spreadtrum
     driver.

   - Fix up spurious interrupts on the TC35894.

   - Support threaded interrupts on the Siox controller.

   - Fix resource leaks on the mockup driver.

   - Fix line event handling in syscall compatible mode for the
     character device.

   - Fix an unitialized variable in the PCA953A driver.

   - Fix access to all GPIO IRQs on the Aspeed AST2600.

   - Fix line direction on the AMD FCH driver.

   - Use the bitmap API instead of compiler intrinsics for bit
     manipulation in the PCA953x driver"

* tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
  gpio: pca953x: Use bitmap API over implicit GCC extension
  gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION
  gpio: aspeed: fix ast2600 bank properties
  gpio/aspeed-sgpio: don't enable all interrupts by default
  gpio/aspeed-sgpio: enable access to all 80 input & output sgpios
  gpio: pca953x: Fix uninitialized pending variable
  gpiolib: Fix line event handling in syscall compatible mode
  gpio: mockup: fix resource leak in error path
  gpio: siox: explicitly support only threaded irqs
  gpio: tc35894: fix up tc35894 interrupt configuration
  gpio: sprd: Clear interrupt when setting the type as edge
  gpio: omap: Fix warnings if PM is disabled

Pull MMC fixes from Ulf Hansson:

 - Fix deadlock when removing MEMSTICK host

 - Workaround broken CMDQ on Intel GLK based IRBIS models

* tag 'mmc-v5.9-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models
  memstick: Skip allocating card when removing host

Commit f227e3ec ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc727 ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.

From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.

Fixes: 83bdc727 ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>