- 08 Nov, 2022 1 commit
-
-
AngeloGioacchino Del Regno authored
Like MSM8916 and some others, MSM8976 uses qcom,smd-channels and not qcom,glink-channels. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221104172122.252761-5-angelogioacchino.delregno@collabora.com
-
- 07 Nov, 2022 6 commits
-
-
Jiasheng Jiang authored
As idr_alloc() and of_property_read_string_index() can return negative numbers, it should be better to check the return value and deal with the exception. Therefore, it should be better to use goto statement to stop and return error. Fixes: 6adba21e ("soc: qcom: Add APR bus driver") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by:
-
Melody Olvera authored
Add SoC ID table entries for the QDU1000 and QRU1000 platforms and their variants. Signed-off-by:
Melody Olvera <quic_molvera@quicinc.com> Signed-off-by:
-
Melody Olvera authored
Add SoC IDs for Qualcomm QDU1000 and QRU1000 platforms and their variants. Signed-off-by:
-
Melody Olvera authored
Add the power domains exposed by RPMH in the Qualcomm QDU1000 and QRU1000 platforms. Signed-off-by:
-
Melody Olvera authored
Add compatible and constants for the power domains exposed by the RPMH in the Qualcomm QDU1000 and QRU1000 platforms. Signed-off-by:
-
Manikanta Pubbisetty authored
WLAN firmware uses SMP2P protocol in order to talk to the application processor (AP) in certain cases like WoW (Wake on Wireless). WLAN firmware runs on the WPSS Q6 processor (Wireless Processor SubSystem). Therefore it is required to have sub nodes pertaining to the WPSS Q6 processor and the application processor in the SMP2P node. Add WPSS Q6 (Wireless Processor SubSystem) node names to the pattern property required for WPSS Q6 processor to communicate to the application processor and vice versa over SMP2P protocol. Signed-off-by:
Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Acked-by:
-
- 06 Nov, 2022 5 commits
-
-
AngeloGioacchino Del Regno authored
Implement the support for SAW v2.3, used in at least MSM8976, MSM8956 and APQ variants and while at it also add the configuration for the MSM8976's little (a53) and big (a72) clusters cache power management. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> [Marijn: reorder struct definitions to follow high-to-low order] Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
-
AngeloGioacchino Del Regno authored
Add SPM AVS Wrapper 2 compatibles for MSM8976's L2 cache. Signed-off-by:
-
Luca Weiss authored
The function platform_get_irq prints an error message into the kernel log when the irq isn't found. Since the interrupt is actually optional and not provided by some SoCs, use platform_get_irq_optional which does not print an error message. Fixes: c081f306 ("soc: qcom: Add support to register LLCC EDAC driver") Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Signed-off-by:
-
Vincent Knecht authored
Add SPM register information and initialization values for QCOM MSM8939 SoC. Signed-off-by:
Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Vincent Knecht authored
Document the "qcom,msm8939-saw2-v3.0-cpu" compatible for the CPU Subsystem Power Manager (SPM) on the MSM8939 SoC. Signed-off-by:
-
- 17 Oct, 2022 18 commits
-
-
Luca Weiss authored
Document the aoss-qmp compatible for sc8280xp. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Reviewed-by:
-
Konrad Dybcio authored
Document the compatible for Qualcomm SM6375 SCM. SCM consumes a single clock (core / RPM_SMD_CE1_CLK), though it does not matter whether Linux enables it, as one of the billion levels of firmware ensures it's on anyway. Still, mark it as used for the sake of correctness. Signed-off-by:
-
Stephen Boyd authored
This driver purely exposes information from memory to the kernel. Let's mark it as not having any device PM functionality, so that during suspend we skip even trying to call a suspend function on this device. This clears up suspend logs more than anything else, but it also shaves a few cycles off suspend. Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Stephen Boyd authored
This driver purely exposes information from memory to the kernel. Let's mark it as not having any device PM functionality, so that during suspend we skip even trying to call a suspend function on this device. This clears up suspend logs more than anything else, but it also shaves a few cycles off suspend. Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
-
Luca Weiss authored
Add more IDs that are found in the downstream msm-4.19 kernel under the path include/linux/qpnp/qpnp-revid.h. Signed-off-by:
Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by:
-
Luca Weiss authored
There are some IDs that are written in uppercase. For consistency convert them to lowercase. Signed-off-by:
-
Jeff Johnson authored
Commit ff6d3658 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for QCOM PDR. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by:
-
Bjorn Andersson authored
In some cases the hardware that the bootloader has left configured depends on RPMH power domains for their operation up until the point where the related Linux device driver probes and can inherit that configuration, or power down the hardware gracefully. Unfortunately as Linux probes the releavant drivers in sequence there are periods during the Linux boot flow where either the genpd refcount will reach 0, or worse where the active performance_state votes does not meet the requirements of the state that the hardware was left in. One specific example of this is during boot of e.g. SM8150/SC8180X, where the display clock controller probes, without any particular performance state needs (to access its registers). This will drop the MMCX rail to MIN_SVS, which isn't sufficient to sustain the clock rates that the later probing MDP is configured to. This results in an unrecoverable system state. Handle both these cases by keeping the RPMH power-domais that are referenced voted for highest state, until sync_state indicates that all devices referencing the RPMH power-domain driver has been probed. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Caleb Connolly <caleb@connolly.tech> Reviewed-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Signed-off-by:
-
Konrad Dybcio authored
Add a compatible for the SM6375 SoC. Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Konrad Dybcio authored
Document the compatible for SM6375. Signed-off-by:
-
Krzysztof Kozlowski authored
The Qualcomm Resource Power Manager (RPM) over SMD bindings contain compatibles and description for RPM devices on two different communication channels: SMD and GLINK. Except the difference in the parent node, they use different properties for describing name of channel qcom,smd-channels or qcom,glink-channels. The first one is already present but second is missing: qcom/sm6125-sony-xperia-seine-pdx201.dtb: rpm-requests: 'qcom,glink-channels' does not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+' Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
The Qualcomm RPM over SMD contains devices for one or two PMIC regulators - already used in several DTS files. Signed-off-by:
-
Gustavo A. R. Silva authored
Zero-length arrays are deprecated and we are moving towards adopting C99 flexible-array members, instead. So, replace zero-length arrays declarations in anonymous union with the new DECLARE_FLEX_ARRAY() helper macro. This helper allows for flexible-array members in unions. Link: https://github.com/KSPP/linux/issues/193 Link: https://github.com/KSPP/linux/issues/224Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Richard Acayan authored
The Snapdragon 670 has similar power domains to SDM845 but no EBI power domain. Add a new array for them to avoid requesting a power domain which is unsupported by the hardware. Signed-off-by:
Richard Acayan <mailingradian@gmail.com> Reviewed-by:
-
Richard Acayan authored
Add the RPMh power domain IDs and compatible string for Snapdragon 670 to make SDM670 power domains accessible to the device trees. Signed-off-by:
-
Krzysztof Kozlowski authored
The Qualcomm SoC ID values are encoded in few places: DTS files, Devicetree bindings (both used by some of Qualcomm bootloaders or tools) and in soc_id table of socinfo driver. Do not duplicate the actual values in the last one but use the constants from the bindings. Tested by comparing output object file (exactly the same). Signed-off-by:
-
Krzysztof Kozlowski authored
The top level qcom,msm-id and qcom,board-id properties are utilized by bootloaders on Qualcomm MSM platforms to determine which device tree should be used and passed to the kernel. The commit b32e592d ("devicetree: bindings: Document qcom board compatible format") from 2015 was a consensus during discussion about upstreaming qcom,msm-id and qcom,board-id fields. There are however still problems with that consensus: 1. It was reached 7 years ago but it turned out its implementation did not reach all possible products. 2. Initially additional tool (dtbTool) was needed for parsing these fields to create a QCDT image consisting of multiple DTBs, later the bootloaders were improved and they use these qcom,msm-id and qcom,board-id properties directly. 3. Extracting relevant information from the board compatible requires this additional tool (dtbTool), which makes the build process more complicated and not easily reproducible (DTBs are modified after the kernel build). 4. Some versions of Qualcomm bootloaders expect these properties even when booting with a single DTB. The community is stuck with these bootloaders thus they require properties in the DTBs. Since several upstreamed Qualcomm SoC-based boards require these properties to properly boot and the properties are reportedly used by bootloaders, document them along with the bindings header with constants used by: bootloader, some DTS and socinfo driver. Link: https://lore.kernel.org/r/a3c932d1-a102-ce18-deea-18cbbd05ecab@linaro.org/Co-developed-by:
Kumar Gala <galak@codeaurora.org> Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> [bjorn: Only applied qcom-part of patch] Signed-off-by:
-
- 16 Oct, 2022 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds authored
Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1 -
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels when using bperf (perf BPF based counters) with cgroups. - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that monitors bandwidth, latency, bus utilization and buffer occupancy. Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst. - User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, fix it in the setup of Intel PT on hybrid systems. - Fix metricgroups title message in 'perf list', it should state that the metrics groups are to be used with the '-M' option, not '-e'. - Sync the msr-index.h copy with the kernel sources, adding support for using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well as decoding it when printing the MSR tracepoint arguments. - Fix program header size and alignment when generating a JIT ELF in 'perf inject'. - Add multiple new Intel PT 'perf test' entries, including a jitdump one. - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when running on PowerPC due to an invalid topology number in that arch. - Fix the 'perf test' for arm_coresight failures on the ARM Juno system. - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this option to the or expression expected in the intercepted perf_event_open() syscall. - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the 'perf annotate' asm parser. - Fix 'perf mem record -C' option processing, it was being chopped up when preparing the underlying 'perf record -e mem-events' and thus being ignored, requiring using '-- -C CPUs' as a workaround. - Improvements and tidy ups for 'perf test' shell infra. - Fix Intel PT information printing segfault in uClibc, where a NULL format was being passed to fprintf. * tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools arch x86: Sync the msr-index.h copy with the kernel sources perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver perf auxtrace arm: Refactor event list iteration in auxtrace_record__init() perf tests stat+json_output: Include sanity check for topology perf tests stat+csv_output: Include sanity check for topology perf intel-pt: Fix system_wide dummy event for hybrid perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc perf test: Fix attr tests for PERF_FORMAT_LOST perf test: test_intel_pt.sh: Add 9 tests perf inject: Fix GEN_ELF_TEXT_OFFSET for jit perf test: test_intel_pt.sh: Add jitdump test perf test: test_intel_pt.sh: Tidy some alignment perf test: test_intel_pt.sh: Print a message when skipping kernel tracing perf test: test_intel_pt.sh: Tidy some perf record options perf test: test_intel_pt.sh: Fix return checking again perf: Skip and warn on unknown format 'configN' attrs perf list: Fix metricgroups title message perf mem: Fix -C option behavior for perf mem record perf annotate: Add missing condition flags for arm64 ...
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the combination of Clang >= 14 and GAS <= 2.35. - Drop vmlinux.bz2 from the rpm package as it just annoyingly increased the package size. - Fix modpost error under build environments using musl. - Make *.ll files keep value names for easier debugging - Fix single directory build - Prevent RISC-V from selecting the broken DWARF5 support when Clang and GAS are used together. * tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5 kbuild: fix single directory build kbuild: add -fno-discard-value-names to cmd_cc_ll_c scripts/clang-tools: Convert clang-tidy args to list modpost: put modpost options before argument kbuild: Stop including vmlinux.bz2 in the rpm's Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: - fix a regression in guest mounts to old servers - improvements to directory leasing (caching directory entries safely beyond the root directory) - symlink improvement (reducing roundtrips needed to process symlinks) - an lseek fix (to problem where some dir entries could be skipped) - improved ioctl for returning more detailed information on directory change notifications - clarify multichannel interface query warning - cleanup fix (for better aligning buffers using ALIGN and round_up) - a compounding fix - fix some uninitialized variable bugs found by Coverity and the kernel test robot * tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve SMB3 change notification support cifs: lease key is uninitialized in two additional functions when smb1 cifs: lease key is uninitialized in smb1 paths smb3: must initialize two ACL struct fields to zero cifs: fix double-fault crash during ntlmssp cifs: fix static checker warning cifs: use ALIGN() and round_up() macros cifs: find and use the dentry for cached non-root directories also cifs: enable caching of directories for which a lease is held cifs: prevent copying past input buffer boundaries cifs: fix uninitialised var in smb2_compound_op() cifs: improve symlink handling for smb2+ smb3: clarify multichannel warning cifs: fix regression in very old smb1 mounts cifs: fix skipping to incorrect offset in emit_cached_dirents
-
Tetsuo Handa authored
This reverts commit 78e5a339 ("cpumask: fix checking valid cpu range"). syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at cpu_max_bits_warn() [1], for commit 78e5a339 ("cpumask: fix checking valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE() when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of "cpu" will trivially hit cpu == nr_cpumask_bits condition. Although syzbot found this problem in linux-next.git on 2022/09/27 [2], this problem was not fixed immediately. As a result, that patch was sent to linux.git before the patch author recognizes this problem, and syzbot started failing to test changes in linux.git since 2022/10/10 [3]. Andrew Jones proposed a fix for x86 and riscv architectures [4]. But [2] and [5] indicate that affected locations are not limited to arch code. More delay before we find and fix affected locations, less tested kernel (and more difficult to bisect and fix) before release. We should have inspected and fixed basically all cpumask users before applying that patch. We should not crash kernels in order to ask existing cpumask users to update their code, even if limited to CONFIG_DEBUG_PER_CPU_MAPS=y case. Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1] Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2] Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3] Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4] Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5] Reported-by:
Andrew Jones <ajones@ventanamicro.com> Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Yury Norov <yury.norov@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
When building with a RISC-V kernel with DWARF5 debug info using clang and the GNU assembler, several instances of the following error appear: /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported Dumping the .s file reveals these .uleb128 directives come from .debug_loc and .debug_ranges: .Ldebug_loc0: .byte 4 # DW_LLE_offset_pair .uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset .uleb128 .Ltmp1-.Lfunc_begin0 # ending offset .byte 1 # Loc expr size .byte 90 # DW_OP_reg10 .byte 0 # DW_LLE_end_of_list .Ldebug_ranges0: .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp6-.Lfunc_begin0 # starting offset .uleb128 .Ltmp27-.Lfunc_begin0 # ending offset .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp28-.Lfunc_begin0 # starting offset .uleb128 .Ltmp30-.Lfunc_begin0 # ending offset .byte 0 # DW_RLE_end_of_list There is an outstanding binutils issue to support a non-constant operand to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to be any movement on it, due to concerns over how it would work with linker relaxation. To avoid these build errors, prevent DWARF5 from being selected when using clang and an assembler that does not have support for these symbol deltas, which can be easily checked in Kconfig with as-instr plus the small test program from the dwz test suite from the binutils issue. Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215 Link: https://github.com/ClangBuiltLinux/linux/issues/1719Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Commit f110e5a2 ("kbuild: refactor single builds of *.ko") was wrong. KBUILD_MODULES _is_ needed for single builds. Otherwise, "make foo/bar/baz/" does not build module objects at all. Fixes: f110e5a2 ("kbuild: refactor single builds of *.ko") Reported-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
David Sterba <dsterba@suse.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slabLinus Torvalds authored
Pull slab hotfix from Vlastimil Babka: "A single fix for the common-kmalloc series, for warnings on mips and sparc64 reported by Guenter Roeck" * tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
-
