- 11 Mar, 2024 5 commits
-
-
Alex Williamson authored
Currently for devices requiring masking at the irqchip for INTx, ie. devices without DisINTx support, the IRQ is enabled in request_irq() and subsequently disabled as necessary to align with the masked status flag. This presents a window where the interrupt could fire between these events, resulting in the IRQ incrementing the disable depth twice. This would be unrecoverable for a user since the masked flag prevents nested enables through vfio. Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx is never auto-enabled, then unmask as required. Cc: <stable@vger.kernel.org> Fixes: 89e1f7d4 ("vfio: Add PCI device driver") Reviewed-by:
Kevin Tian <kevin.tian@intel.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20240308230557.805580-2-alex.williamson@redhat.comSigned-off-by:
Alex Williamson <alex.williamson@redhat.com>
-
Brett Creeley authored
The current logic for handling resets is more complicated than it needs to be. The deferred_reset flag is used to indicate a reset is needed and the deferred_reset_state is the requested, post-reset, state. Also, the deferred_reset logic was added to vfio migration drivers to prevent a circular locking dependency with respect to mm_lock and state mutex. This is mainly because of the copy_to/from_user() functions(which takes mm_lock) invoked under state mutex. Remove all of the deferred reset logic and just pass the requested next state to pds_vfio_reset() so it can be used for VMM and DSC initiated resets. This removes the need for pds_vfio_state_mutex_lock(), so remove that and replace its use with a simple mutex_unlock(). Also, remove the reset_mutex as it's no longer needed since the state_mutex can be the driver's primary protector. Suggested-by:
Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Link: https://lore.kernel.org/r/20240308182149.22036-3-brett.creeley@amd.comSigned-off-by:
-
Brett Creeley authored
It's possible the migration file is accessed after reset when it has been cleaned up, especially when it's initiated by the device. This is because the driver doesn't rip out the filep when cleaning up it only frees the related page structures and sets its local struct pds_vfio_lm_file pointer to NULL. This can cause a NULL pointer dereference, which is shown in the example below during a restore after a device initiated reset: BUG: kernel NULL pointer dereference, address: 000000000000000c PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:pds_vfio_get_file_page+0x5d/0xf0 [pds_vfio_pci] [...] Call Trace: <TASK> pds_vfio_restore_write+0xf6/0x160 [pds_vfio_pci] vfs_write+0xc9/0x3f0 ? __fget_light+0xc9/0x110 ksys_write+0xb5/0xf0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] Add a disabled flag to the driver's struct pds_vfio_lm_file that gets set during cleanup. Then make sure to check the flag when the migration file is accessed via its file_operations. By default this flag will be false as the memory for struct pds_vfio_lm_file is kzalloc'd, which means the struct pds_vfio_lm_file is enabled and accessible. Also, since the file_operations and driver's migration file cleanup happen under the protection of the same pds_vfio_lm_file.lock, using this flag is thread safe. Fixes: 8512ed25 ("vfio/pds: Always clear the save/restore FDs on reset") Reviewed-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Reviewed-by:
-
Yishai Hadas authored
Enable live migration only once the firmware supports PRE_COPY. PRE_COPY has been supported by the firmware for a long time already [1] and is required to achieve a low downtime upon live migration. This lets us clean up some old code that is not applicable those days while PRE_COPY is fully supported by the firmware. [1] The minimum firmware version that supports PRE_COPY is 28.36.1010, it was released in January 2023. No firmware without PRE_COPY support ever available to users. Signed-off-by:
Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20240306105624.114830-1-yishaih@nvidia.comSigned-off-by:
-
- 05 Mar, 2024 3 commits
-
-
Ricardo B. Marliere authored
Since commit 43a7206b ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the mbochs_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240301-class_cleanup-vfio-v1-2-9236d69083f5@marliere.netSigned-off-by:
-
Ricardo B. Marliere authored
Since commit 43a7206b ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the mdpy_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by:
-
Shameer Kolothum authored
The deferred_reset logic was added to vfio migration drivers to prevent a circular locking dependency with respect to mm_lock and state mutex. This is mainly because of the copy_to/from_user() functions(which takes mm_lock) invoked under state mutex. But for HiSilicon driver, the only place where we now hold the state mutex for copy_to_user is during the PRE_COPY IOCTL. So for pre_copy, release the lock as soon as we have updated the data and perform copy_to_user without state mutex. By this, we can get rid of the deferred_reset logic. Link: https://lore.kernel.org/kvm/20240220132459.GM13330@nvidia.com/Signed-off-by:
-
- 04 Mar, 2024 4 commits
-
-
Alex Williamson authored
This reverts commit 873aefb3. This was a heinous workaround and it turns out it's been fixed in mm twice since it was introduced. Most recently, commit c8070b78 ("mm: Don't pin ZERO_PAGE in pin_user_pages()") would have prevented running up the zeropage refcount, but even before that commit 84209e87 ("mm/gup: reliable R/O long-term pinning in COW mappings") avoids the vfio use case from pinning the zeropage at all, instead replacing it with exclusive anonymous pages. Remove this now useless overhead. Suggested-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
-
Ankit Agrawal authored
The NVIDIA Grace Hopper GPUs have device memory that is supposed to be used as a regular RAM. It is accessible through CPU-GPU chip-to-chip cache coherent interconnect and is present in the system physical address space. The device memory is split into two regions - termed as usemem and resmem - in the system physical address space, with each region mapped and exposed to the VM as a separate fake device BAR [1]. Owing to a hardware defect for Multi-Instance GPU (MIG) feature [2], there is a requirement - as a workaround - for the resmem BAR to display uncached memory characteristics. Based on [3], on system with FWB enabled such as Grace Hopper, the requisite properties (uncached, unaligned access) can be achieved through a VM mapping (S1) of NORMAL_NC and host mapping (S2) of MT_S2_FWB_NORMAL_NC. KVM currently maps the MMIO region in S2 as MT_S2_FWB_DEVICE_nGnRE by default. The fake device BARs thus displays DEVICE_nGnRE behavior in the VM. The following table summarizes the behavior for the various S1 and S2 mapping combinations for systems with FWB enabled [3]. S1 | S2 | Result NORMAL_NC | NORMAL_NC | NORMAL_NC NORMAL_NC | DEVICE_nGnRE | DEVICE_nGnRE Recently a change was added that modifies this default behavior and make KVM map MMIO as MT_S2_FWB_NORMAL_NC when a VMA flag VM_ALLOW_ANY_UNCACHED is set [4]. Setting S2 as MT_S2_FWB_NORMAL_NC provides the desired behavior (uncached, unaligned access) for resmem. To use VM_ALLOW_ANY_UNCACHED flag, the platform must guarantee that no action taken on the MMIO mapping can trigger an uncontained failure. The Grace Hopper satisfies this requirement. So set the VM_ALLOW_ANY_UNCACHED flag in the VMA. Applied over next-20240227. base-commit: 22ba90670a51 Link: https://lore.kernel.org/all/20240220115055.23546-4-ankita@nvidia.com/ [1] Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [2] Link: https://developer.arm.com/documentation/ddi0487/latest/ section D8.5.5 [3] Link: https://lore.kernel.org/all/20240224150546.368-1-ankita@nvidia.com/ [4] Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Vikram Sethi <vsethi@nvidia.com> Cc: Zhi Wang <zhiw@nvidia.com> Signed-off-by:
Ankit Agrawal <ankita@nvidia.com> Reviewed-by:
-
Alex Williamson authored
Merge branch 'kvm-arm64/vfio-normal-nc' of https://git.kernel.org/pub/scm/linux/kernel/git/oupton/linux into v6.9/vfio/next
-
Geert Uytterhoeven authored
Obviously drivers/vfio/platform/vfio_amba.c started its life as a simplified copy of drivers/dma/pl330.c, but not all variable names were updated. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
- 01 Mar, 2024 1 commit
-
-
Brett Creeley authored
After reset the VFIO device state will always be put in VFIO_DEVICE_STATE_RUNNING, but the save/restore files will only be cleared if the previous state was VFIO_DEVICE_STATE_ERROR. This can/will cause the restore/save files to be leaked if/when the migration state machine transitions through the states that re-allocates these files. Fix this by always clearing the restore/save files for resets. Fixes: 7dabb1bc ("vfio/pds: Add support for firmware recovery") Cc: stable@vger.kernel.org Signed-off-by:
-
- 24 Feb, 2024 4 commits
-
-
Ankit Agrawal authored
The VM_ALLOW_ANY_UNCACHED flag is implemented for ARM64, allowing KVM stage 2 device mapping attributes to use Normal-NC rather than DEVICE_nGnRE, which allows guest mappings supporting write-combining attributes (WC). ARM does not architecturally guarantee this is safe, and indeed some MMIO regions like the GICv2 VCPU interface can trigger uncontained faults if Normal-NC is used. To safely use VFIO in KVM the platform must guarantee full safety in the guest where no action taken against a MMIO mapping can trigger an uncontained failure. The expectation is that most VFIO PCI platforms support this for both mapping types, at least in common flows, based on some expectations of how PCI IP is integrated. So make vfio-pci set the VM_ALLOW_ANY_UNCACHED flag. Suggested-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Oliver Upton <oliver.upton@linux.dev>
-
Ankit Agrawal authored
To provide VM with the ability to get device IO memory with NormalNC property, map device MMIO in KVM for ARM64 at stage2 as NormalNC. Having NormalNC S2 default puts guests in control (based on [1], "Combining stage 1 and stage 2 memory type attributes") of device MMIO regions memory mappings. The rules are summarized below: ([(S1) - stage1], [(S2) - stage 2]) S1 | S2 | Result NORMAL-WB | NORMAL-NC | NORMAL-NC NORMAL-WT | NORMAL-NC | NORMAL-NC NORMAL-NC | NORMAL-NC | NORMAL-NC DEVICE<attr> | NORMAL-NC | DEVICE<attr> Still this cannot be generalized to non PCI devices such as GICv2. There is insufficient information and uncertainity in the behavior of non PCI driver. A driver must indicate support using the new flag VM_ALLOW_ANY_UNCACHED. Adapt KVM to make use of the flag VM_ALLOW_ANY_UNCACHED as indicator to activate the S2 setting to NormalNc. [1] section D8.5.5 of DDI0487J_a_a-profile_architecture_reference_manual.pdf Suggested-by:
-
Ankit Agrawal authored
The VM_ALLOW_ANY_UNCACHED flag is implemented for ARM64, allowing KVM stage 2 device mapping attributes to use NormalNC rather than DEVICE_nGnRE, which allows guest mappings supporting write-combining attributes (WC). ARM does not architecturally guarantee this is safe, and indeed some MMIO regions like the GICv2 VCPU interface can trigger uncontained faults if NormalNC is used. Even worse, the expectation is that there are platforms where even DEVICE_nGnRE can allow uncontained faults in corner cases. Unfortunately existing ARM IP requires platform integration to take responsibility to prevent this. To safely use VFIO in KVM the platform must guarantee full safety in the guest where no action taken against a MMIO mapping can trigger an uncontained failure. The assumption is that most VFIO PCI platforms support this for both mapping types, at least in common flows, based on some expectations of how PCI IP is integrated. This can be enabled more broadly, for instance into vfio-platform drivers, but only after the platform vendor completes auditing for safety. The VMA flag VM_ALLOW_ANY_UNCACHED was found to be the simplest and cleanest way to communicate the information from VFIO to KVM that mapping the region in S2 as NormalNC is safe. KVM consumes it to activate the code that does the S2 mapping as NormalNC. Suggested-by:
-
Ankit Agrawal authored
Currently, KVM for ARM64 maps at stage 2 memory that is considered device (i.e. it is not RAM) with DEVICE_nGnRE memory attributes; this setting overrides (as per the ARM architecture [1]) any device MMIO mapping present at stage 1, resulting in a set-up whereby a guest operating system cannot determine device MMIO mapping memory attributes on its own but it is always overridden by the KVM stage 2 default. This set-up does not allow guest operating systems to select device memory attributes independently from KVM stage-2 mappings (refer to [1], "Combining stage 1 and stage 2 memory type attributes"), which turns out to be an issue in that guest operating systems (e.g. Linux) may request to map devices MMIO regions with memory attributes that guarantee better performance (e.g. gathering attribute - that for some devices can generate larger PCIe memory writes TLPs) and specific operations (e.g. unaligned transactions) such as the NormalNC memory type. The default device stage 2 mapping was chosen in KVM for ARM64 since it was considered safer (i.e. it would not allow guests to trigger uncontained failures ultimately crashing the machine) but this turned out to be asynchronous (SError) defeating the purpose. Failures containability is a property of the platform and is independent from the memory type used for MMIO device memory mappings. Actually, DEVICE_nGnRE memory type is even more problematic than Normal-NC memory type in terms of faults containability in that e.g. aborts triggered on DEVICE_nGnRE loads cannot be made, architecturally, synchronous (i.e. that would imply that the processor should issue at most 1 load transaction at a time - it cannot pipeline them - otherwise the synchronous abort semantics would break the no-speculation attribute attached to DEVICE_XXX memory). This means that regardless of the combined stage1+stage2 mappings a platform is safe if and only if device transactions cannot trigger uncontained failures and that in turn relies on platform capabilities and the device type being assigned (i.e. PCIe AER/DPC error containment and RAS architecture[3]); therefore the default KVM device stage 2 memory attributes play no role in making device assignment safer for a given platform (if the platform design adheres to design guidelines outlined in [3]) and therefore can be relaxed. For all these reasons, relax the KVM stage 2 device memory attributes from DEVICE_nGnRE to Normal-NC. The NormalNC was chosen over a different Normal memory type default at stage-2 (e.g. Normal Write-through) to avoid cache allocation/snooping. Relaxing S2 KVM device MMIO mappings to Normal-NC is not expected to trigger any issue on guest device reclaim use cases either (i.e. device MMIO unmap followed by a device reset) at least for PCIe devices, in that in PCIe a device reset is architected and carried out through PCI config space transactions that are naturally ordered with respect to MMIO transactions according to the PCI ordering rules. Having Normal-NC S2 default puts guests in control (thanks to stage1+stage2 combined memory attributes rules [1]) of device MMIO regions memory mappings, according to the rules described in [1] and summarized here ([(S1) - stage1], [(S2) - stage 2]): S1 | S2 | Result NORMAL-WB | NORMAL-NC | NORMAL-NC NORMAL-WT | NORMAL-NC | NORMAL-NC NORMAL-NC | NORMAL-NC | NORMAL-NC DEVICE<attr> | NORMAL-NC | DEVICE<attr> It is worth noting that currently, to map devices MMIO space to user space in a device pass-through use case the VFIO framework applies memory attributes derived from pgprot_noncached() settings applied to VMAs, which result in device-nGnRnE memory attributes for the stage-1 VMM mappings. This means that a userspace mapping for device MMIO space carried out with the current VFIO framework and a guest OS mapping for the same MMIO space may result in a mismatched alias as described in [2]. Defaulting KVM device stage-2 mappings to Normal-NC attributes does not change anything in this respect, in that the mismatched aliases would only affect (refer to [2] for a detailed explanation) ordering between the userspace and GuestOS mappings resulting stream of transactions (i.e. it does not cause loss of property for either stream of transactions on its own), which is harmless given that the userspace and GuestOS access to the device is carried out through independent transactions streams. A Normal-NC flag is not present today. So add a new kvm_pgtable_prot (KVM_PGTABLE_PROT_NORMAL_NC) flag for it, along with its corresponding PTE value 0x5 (0b101) determined from [1]. Lastly, adapt the stage2 PTE property setter function (stage2_set_prot_attr) to handle the NormalNC attribute. The entire discussion leading to this patch series may be followed through the following links. Link: https://lore.kernel.org/all/20230907181459.18145-3-ankita@nvidia.com Link: https://lore.kernel.org/r/20231205033015.10044-1-ankita@nvidia.com [1] section D8.5.5 - DDI0487J_a_a-profile_architecture_reference_manual.pdf [2] section B2.8 - DDI0487J_a_a-profile_architecture_reference_manual.pdf [3] sections 1.7.7.3/1.8.5.2/appendix C - DEN0029H_SBSA_7.1.pdf Suggested-by:
Will Deacon <will@kernel.org> Reviewed-by:
-
- 22 Feb, 2024 11 commits
-
-
Ankit Agrawal authored
NVIDIA's upcoming Grace Hopper Superchip provides a PCI-like device for the on-chip GPU that is the logical OS representation of the internal proprietary chip-to-chip cache coherent interconnect. The device is peculiar compared to a real PCI device in that whilst there is a real 64b PCI BAR1 (comprising region 2 & region 3) on the device, it is not used to access device memory once the faster chip-to-chip interconnect is initialized (occurs at the time of host system boot). The device memory is accessed instead using the chip-to-chip interconnect that is exposed as a contiguous physically addressable region on the host. This device memory aperture can be obtained from host ACPI table using device_property_read_u64(), according to the FW specification. Since the device memory is cache coherent with the CPU, it can be mmap into the user VMA with a cacheable mapping using remap_pfn_range() and used like a regular RAM. The device memory is not added to the host kernel, but mapped directly as this reduces memory wastage due to struct pages. There is also a requirement of a minimum reserved 1G uncached region (termed as resmem) to support the Multi-Instance GPU (MIG) feature [1]. This is to work around a HW defect. Based on [2], the requisite properties (uncached, unaligned access) can be achieved through a VM mapping (S1) of NORMAL_NC and host (S2) mapping with MemAttr[2:0]=0b101. To provide a different non-cached property to the reserved 1G region, it needs to be carved out from the device memory and mapped as a separate region in Qemu VMA with pgprot_writecombine(). pgprot_writecombine() sets the Qemu VMA page properties (pgprot) as NORMAL_NC. Provide a VFIO PCI variant driver that adapts the unique device memory representation into a more standard PCI representation facing userspace. The variant driver exposes these two regions - the non-cached reserved (resmem) and the cached rest of the device memory (termed as usemem) as separate VFIO 64b BAR regions. This is divergent from the baremetal approach, where the device memory is exposed as a device memory region. The decision for a different approach was taken in view of the fact that it would necessiate additional code in Qemu to discover and insert those regions in the VM IPA, along with the additional VM ACPI DSDT changes to communicate the device memory region IPA to the VM workloads. Moreover, this behavior would have to be added to a variety of emulators (beyond top of tree Qemu) out there desiring grace hopper support. Since the device implements 64-bit BAR0, the VFIO PCI variant driver maps the uncached carved out region to the next available PCI BAR (i.e. comprising of region 2 and 3). The cached device memory aperture is assigned BAR region 4 and 5. Qemu will then naturally generate a PCI device in the VM with the uncached aperture reported as BAR2 region, the cacheable as BAR4. The variant driver provides emulation for these fake BARs' PCI config space offset registers. The hardware ensures that the system does not crash when the memory is accessed with the memory enable turned off. It synthesis ~0 reads and dropped writes on such access. So there is no need to support the disablement/enablement of BAR through PCI_COMMAND config space register. The memory layout on the host looks like the following: devmem (memlength) |--------------------------------------------------| |-------------cached------------------------|--NC--| | | usemem.memphys resmem.memphys PCI BARs need to be aligned to the power-of-2, but the actual memory on the device may not. A read or write access to the physical address from the last device PFN up to the next power-of-2 aligned physical address results in reading ~0 and dropped writes. Note that the GPU device driver [6] is capable of knowing the exact device memory size through separate means. The device memory size is primarily kept in the system ACPI tables for use by the VFIO PCI variant module. Note that the usemem memory is added by the VM Nvidia device driver [5] to the VM kernel as memblocks. Hence make the usable memory size memblock (MEMBLK_SIZE) aligned. This is a hardwired ABI value between the GPU FW and VFIO driver. The VM device driver make use of the same value for its calculation to determine USEMEM size. Currently there is no provision in KVM for a S2 mapping with MemAttr[2:0]=0b101, but there is an ongoing effort to provide the same [3]. As previously mentioned, resmem is mapped pgprot_writecombine(), that sets the Qemu VMA page properties (pgprot) as NORMAL_NC. Using the proposed changes in [3] and [4], KVM marks the region with MemAttr[2:0]=0b101 in S2. If the device memory properties are not present, the driver registers the vfio-pci-core function pointers. Since there are no ACPI memory properties generated for the VM, the variant driver inside the VM will only use the vfio-pci-core ops and hence try to map the BARs as non cached. This is not a problem as the CPUs have FWB enabled which blocks the VM mapping's ability to override the cacheability set by the host mapping. This goes along with a qemu series [6] to provides the necessary implementation of the Grace Hopper Superchip firmware specification so that the guest operating system can see the correct ACPI modeling for the coherent GPU device. Verified with the CUDA workload in the VM. [1] https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [2] section D8.5.5 of https://developer.arm.com/documentation/ddi0487/latest/ [3] https://lore.kernel.org/all/20240211174705.31992-1-ankita@nvidia.com/ [4] https://lore.kernel.org/all/20230907181459.18145-2-ankita@nvidia.com/ [5] https://github.com/NVIDIA/open-gpu-kernel-modules [6] https://lore.kernel.org/all/20231203060245.31593-1-ankita@nvidia.com/Reviewed-by:Zhi Wang <zhi.wang.linux@gmail.com> Signed-off-by:
Aniket Agashe <aniketa@nvidia.com> Signed-off-by:
-
Ankit Agrawal authored
range_intersect_range determines an overlap between two ranges. If an overlap, the helper function returns the overlapping offset and size. The VFIO PCI variant driver emulates the PCI config space BAR offset registers. These offset may be accessed for read/write with a variety of lengths including sub-word sizes from sub-word offsets. The driver makes use of this helper function to read/write the targeted part of the emulated register. Make this a vfio_pci_core function, rename and export as GPL. Also update references in virtio driver. Reviewed-by:
-
Ankit Agrawal authored
do_io_rw() is used to read/write to the device MMIO. The grace hopper VFIO PCI variant driver require this functionality to read/write to its memory. Rename this as vfio_pci_core functions and export as GPL. Reviewed-by:
-
Ricardo B. Marliere authored
Now that the driver core can properly handle constant struct bus_type, move the mdev_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by:
Kirti Wankhede <kwankhede@nvidia.com> Link: https://lore.kernel.org/r/20240208-bus_cleanup-vfio-v1-1-ed5da3019949@marliere.netSigned-off-by:
-
Alex Williamson authored
The vfio-pci virtio variant entry slipped in out of order. Link: https://lore.kernel.org/r/20240205235427.2103714-1-alex.williamson@redhat.comSigned-off-by:
-
Yishai Hadas authored
Let firmware knows upon leaving PRE_COPY back to RUNNING as of some error in the target/migration cancellation. This will let firmware cleaning its internal resources that were turned on upon PRE_COPY. The flow is based on the device specification in this area. Signed-off-by:
Leon Romanovsky <leon@kernel.org> Link: https://lore.kernel.org/r/20240205124828.232701-6-yishaih@nvidia.comSigned-off-by:
-
Yishai Hadas authored
Block incremental query which is state-dependent once the migration file was previously marked with state error. This may prevent redundant calls to firmware upon PRE_COPY which will end-up with a failure and a syndrome printed in dmesg. Signed-off-by:
-
Yishai Hadas authored
The SAVE command uses the async command interface over the PF. Upon a failure in the firmware -EREMOTEIO is returned. In that case call mlx5_cmd_out_err() to let it print the command failure details including the firmware syndrome. Note: The other commands in the driver use the sync command interface in a way that a firmware syndrome is printed upon an error inside mlx5_core. Signed-off-by:
-
Yishai Hadas authored
Add support for tracker object change event by referring to its MLX5_EVENT_TYPE_OBJECT_CHANGE event when occurs. This lets the driver recognize whether the firmware moved the tracker object to an error state. In that case, the driver will skip/block any usage of that object including an early exit in case the object was previously marked with an error. This functionality also covers the case when no CQE is delivered as of the error state. The driver was adapted to the device specification to handle the above. Signed-off-by:
-
Yishai Hadas authored
Add the IFC related bits for query tracker. Signed-off-by:
-
Kunwu Chan authored
kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. This is a blocking notifier callback, so errno isn't a proper return value. Use WARN_ON to small allocation failures. Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Link: https://lore.kernel.org/r/20240115063434.20278-1-chentao@kylinos.cnSigned-off-by:
-
- 18 Feb, 2024 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Reformat nested if-conditionals in Makefiles with 4 spaces - Fix CONFIG_DEBUG_INFO_BTF builds for big endian - Fix modpost for module srcversion - Fix an escape sequence warning in gen_compile_commands.py - Fix kallsyms to ignore ARMv4 thunk symbols * tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kallsyms: ignore ARMv4 thunks along with others modpost: trim leading spaces when processing source files list gen_compile_commands: fix invalid escape sequence warning kbuild: Fix changing ELF file type for output of gen_btf for big endian docs: kconfig: Fix grammar and formatting kbuild: use 4-space indentation when followed by conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: - Use a GB page for identity mapping only when memory of this size is requested so that mapping of reserved regions is prevented which would otherwise lead to system crashes on UV machines * tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Fix GICv4.1 affinity update - Restore a quirk for ACPI-based GICv4 systems - Handle non-coherent GICv4 redistributors properly - Prevent spurious interrupts on Broadcom devices using GIC v3 architecture - Other minor fixes * tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init() irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc() irqchip/irq-brcmstb-l2: Add write memory barrier before exit
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd addresses a compilation error encountered during compile test on powerpc" * tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Fix block process call transactions i2c: pasemi: split driver into two separate modules i2c: qcom-geni: Correct I2C TRE sequence
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "This is a bit of a big batch for rc4, but just due to holiday hangover and because I didn't send any fixes last week due to a late revert request. I think next week should be back to normal. - Fix ftrace bug on boot caused by exit text sections with '-fpatchable-function-entry' - Fix accuracy of stolen time on pseries since the switch to VIRT_CPU_ACCOUNTING_GEN - Fix a crash in the IOMMU code when doing DLPAR remove - Set pt_regs->link on scv entry to fix BPF stack unwinding - Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke gdb - Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled - Fix build failures with KASAN enabled and 32KB stack size - Some other minor fixes Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A, R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy, Srikar Dronamraju, and Venkat Rao Bagalkote" * tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach powerpc/pseries: fix accuracy of stolen time powerpc/ftrace: Ignore ftrace locations in exit text sections powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E powerpc/kasan: Limit KASAN thread size increase to 32KB Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add" powerpc: 85xx: mark local functions static powerpc: udbg_memcons: mark functions static powerpc/kasan: Fix addr error caused by page alignment powerpc/6xx: set High BAT Enable flag on G2_LE cores selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code() powerpc/64: Set task pt_regs->link to the LR value on scv entry powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add powerpc/pseries/papr-sysparm: use u8 arrays for payloads
-
- 17 Feb, 2024 6 commits
-
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "Mostly pretty trivial, the user visible ones are: - don't barf when replicas_required > replicas - fix check_version_upgrade() so it doesn't do something nonsensical when we're downgrading" * tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefs: bcachefs: Fix missing va_end() bcachefs: Fix check_version_upgrade() bcachefs: Clamp replicas_required to replicas bcachefs: fix missing endiannes conversion in sb_members bcachefs: fix kmemleak in __bch2_read_super error handling path bcachefs: Fix missing bch2_err_class() calls -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are some driver core fixes, a kobject fix, and a documentation update for 6.8-rc5. In detail these changes are: - devlink fixes for reported issues with 6.8-rc1 - topology scheduling regression fix that has been reported by many - kobject loosening of checks change in -rc1 is now reverted as some codepaths seemed to need the checks - documentation update for the CVE process. Has been reviewed by many, the last minute change to the document was to bring the .rst format back into the the new style rules, the contents did not change. All of these, except for the documentation update, have been in linux-next for over a week. The documentation update has been reviewed for weeks by a group of developers, and in public for a week and the wording has stabilized for now. If future changes are needed, we can do so before 6.8-final is out (or anytime after that)" * tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: Document the Linux Kernel CVE process Revert "kobject: Remove redundant checks for whether ktype is NULL" driver core: fw_devlink: Improve logs for cycle detection driver core: fw_devlink: Improve detection of overlapping cycles driver core: Fix device_link_flag_is_sync_state_only() topology: Set capacity_freq_ref in all cases -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char / miscdriver fixes from Greg KH: "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5. Included in here are: - lots of iio driver fixes for reported issues - nvmem device naming fixup for reported problem - interconnect driver fixes for reported issues All of these have been in linux-next for a while with no reported the issues (the nvmem patch was included in a different branch in linux-next before sent to me for inclusion here)" * tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) nvmem: include bit index in cell sysfs file name iio: adc: ad4130: only set GPIO_CTRL if pin is unused iio: adc: ad4130: zero-initialize clock init data interconnect: qcom: x1e80100: Add missing ACV enable_mask interconnect: qcom: sm8650: Use correct ACV enable_mask iio: accel: bma400: Fix a compilation problem iio: commom: st_sensors: ensure proper DMA alignment iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier staging: iio: ad5933: fix type mismatch regression iio: humidity: hdc3020: fix temperature offset iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup() iio: adc: ad_sigma_delta: ensure proper DMA alignment iio: imu: adis: ensure proper DMA alignment iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry iio: imu: bno055: serdev requires REGMAP iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC iio: pressure: bmp280: Add missing bmp085 to SPI id table iio: core: fix memleak in iio_device_register_sysfs interconnect: qcom: sm8550: Enable sync_state ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial fixes from Greg KH: "Here are three small tty and serial driver fixes for 6.8-rc5: - revert a 8250_pci1xxxx off-by-one change that was incorrect - two changes to fix the transmit path of the mxs-auart driver, fixing a regression in the 6.2 release All of these have been in linux-next for over a week with no reported issues" * tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: mxs-auart: fix tx serial: core: introduce uart_port_tx_flags() serial: 8250_pci1xxxx: partially revert off by one patch -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt fixes from Greg KH: "Here are two small fixes for 6.8-rc5: - thunderbolt to fix a reported issue on many platforms - dwc3 driver revert of a commit that caused problems in -rc1 Both of these changes have been in linux-next for over a week with no reported issues" * tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: dwc3: Support EBC feature of DWC_usb31" thunderbolt: Fix setting the CNS bit in ROUTER_CS_5
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - regression fix for rkisp1 shared IRQ logic - fix atomisp breakage due to a kAPI change - permission fix for remote controller BPF support - memleak fix in ir_toy driver - Kconfig dependency fix for pwm-ir-rx * tag 'media/v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: pwm-ir-tx: Depend on CONFIG_HIGH_RES_TIMERS media: ir_toy: fix a memleak in irtoy_tx media: rc: bpf attach/detach requires write permission media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8 media: rkisp1: Fix IRQ handling due to shared interrupts media: Revert "media: rkisp1: Drop IRQF_SHARED"
-
