- 21 Feb, 2007 40 commits
-
-
Michael Schimek authored
Functions buffer_release() in bttv-driver.c and vbi_buffer_release() in bttv-vbi.c are ending with: bttv_dma_free(&fh->cap,fh->btv,buf); For vbi it seems to be wrong. Both functions should end with: bttv_dma_free(q,fh->btv,buf); Thanks to Peter Schlaf <peter.schlaf@web.de> for pointing this. Signed-off-by:Michael H. Schimek <mschimek@gmx.at> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
With debug>0, it will show mute/unmute and set frequency events with debug>=4, it will show get frequency events Also, some kernel CodingStyle fixes were done. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
fmtools use VIDIOCSTUNER, with, in turn, calls VIDIOC_S_INPUT on v4l1-compat. So, those ioctls are required for V4L1 to work properly. Signed-off-by: -
Mauro Carvalho Chehab authored
v4l1-compat requires those two ioctls to translate VIDIOC[SG]RADIO into V4L2 calls. Signed-off-by: -
Mauro Carvalho Chehab authored
v4l1-compat requires those two ioctls to translate VIDIOC[SG]RADIO into V4L2 calls. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Before this patch, vivi were simulating a scatter gather DMA transfer. While this is academic, showing how stuff really works on a real PCI device, this means a non-optimized code. There are only two memory models that vivi implements: 1) kernel alloced memory. This is also used by read() method. On this case, a vmalloc32 buffer is allocated at kernel; 2) userspace allocated memory. This is used by most userspace apps. video-buf will store this pointer. a simple copy_to_user is enough to transfer data. The third memory model scenario supported by video-buf is overlay mode. This model is not implemented on vivi and unlikely to be implemented on newer drivers, since now, most userspace apps do some post-processing (like de-interlacing). After this patch, some cleanups may be done at video-buf.c to avoid allocating pages, when the driver doesn't need a PCI buffer. This is the case of vivi and usb drivers. Signed-off-by: -
Trent Piepho authored
The direct register access ioctls were defined as kernel internal only, but they are very useful for debugging hardware from userspace and are used as such. Officially export them. VIDIOC_INT_[SG]_REGISTER is renamed to VIDIOC_DBG_[SG]_REGISTER Definition of ioctl and struct v4l2_register is moved from v4l2-common.h to videodev2.h. Types used in struct v4l2_register are changed to the userspace exportable versions (u32 -> __u32, etc). Use of VIDIOC_DBG_S_REGISTER requires CAP_SYS_ADMIN permission, so move the check into the video_ioctl2() dispatcher so it doesn't need to be duplicated in each driver's call-back function. CAP_SYS_ADMIN check is added to pvrusb2 (which doesn't use video_ioctl2). Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
Add support for these ioctls to the video_ioctl2 system and the cx88 driver. Signed-off-by:
-
Michael Krufky authored
Move filter caps from device caps to adapter caps for the megasky driver. This fixes usb1.1 operation. Signed-off-by:
Aapo Tahkola <aet@rasterburn.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Aapo Tahkola authored
Fixes qt1010 identification bug with megasky caused by the Quantek QT1010 tuner module patch. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Antti Palosaari authored
QT1010: - old qt1010-code totally rewritten and put in own kernel module - same enhancements as my earlier QT1010 125kHz patch - tuner initialization - register 1f calculation - register 20 calculation - register 25 calculation m920x: (MSI Megasky) - use new QT1010 module instead of old code Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Michael Krufky authored
move .caps from the adapter properties to the device properties. Thanks to Martin Schwier for confirming this fix. Signed-off-by:
-
Jan Nijs authored
This patch changes qt1010.h to use dvb_usb_device struct instead of a dvb_usb_adapter for accessing the private area of the driver. Without this patch my PC hard locks when an application tries to access the DVB tuner. Signed-off-by:
Jan Nijs <jan.nijs@scarlet.be> Signed-off-by:
-
Michael Krufky authored
- removed extra newline - removed NULL entry - fixed versions.txt Signed-off-by:
-
Michael Krufky authored
The megasky_tuner_attach function is not specific to this device. This patch renames it to qt1010_tuner_attach and moves it into the qt1010 header file. Signed-off-by:
-
Patrick Boettcher authored
- Removed some needless brances - Removed an unneeded check for adapter[0] - Removed unneeded declaration of .generic_bulk_ctrl_endpoint = 0x01 Signed-off-by:
-
Michael Krufky authored
Some cleanups and suggestions from Patrick Boettcher. Dropped the mutex in m9206_rc_query using #if 0, because M9206_CORE, M9206_I2C, M9206_FILTER and M9206_FW can be accessed concurrently. Thanks to both Aapo Tahkola and Patrick Boettcher. Signed-off-by:
-
Aapo Tahkola authored
- hardware pid filtering no longer enabled unless in usb 1.x mode - more responsive rc handling - some minor bug fixes and code refolding - m9206_write delay dropped (doesn't seem to be needed) Signed-off-by:
-
Michael Krufky authored
qt1010 is a tuner used in some other devices, so this code should be put into a separate file so that it could be reused by other drivers. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
update code to use dvb_attach() update code to reflect recent changes to the dvb_usb framework Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Aapo Tahkola authored
Currently, the driver works in bulk mode supporting both USB 2.0 and 1.0 with and without hardware pid filters. The ULi m9205 also supports isochronous transfer mode, but I have dropped support for it because it depends on firmware and does not work on all USB host chips. Further, I have no firmware with remote controller support for this mode. Signed-off-by:
-
Tino Keitel authored
I noticed that udev does not create a symlink for the CinergyT2 remote input device in /dev/input/by-id, which is required if I want to have a unique device name for lircd. The attached patch tries to achive this. However, udev still omits the input device for /dev/input/by-id symlinks. I think something is still not reported correctly. Signed-off-by:
Tino Keitel <tino.keitel@tikei.de> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
pvrusb2 have only one tuner inside. However, as it were not handling index, a call to v4l-info were returning as if it were an infinite number of tuners: $ v4l-info|grep VIDIOC_G_TUNER |head -5 VIDIOC_G_TUNER(0) VIDIOC_G_TUNER(1) VIDIOC_G_TUNER(2) VIDIOC_G_TUNER(3) VIDIOC_G_TUNER(4) Acked-by:Mike Isely <isely@isely.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
pvrusb2-encoder.c: In function 'pvr2_encoder_cmd': pvrusb2-encoder.c:195: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int' pvrusb2-encoder.c:205: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int' pvrusb2-encoder.c: In function 'pvr2_encoder_vcmd': pvrusb2-encoder.c:303: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int' Acked-by:
-
Heiko Baums authored
Adds support for the combined S-Video/Composite input of the Terratec Cinergy 1400 DVB-T. Signed-off-by:
Heiko Baums <heiko@baums-on-web.de> Signed-off-by:
-
Marco Schluessler authored
Nexus CA needs to use a different routing on saa7115 module. Signed-off-by:
Marco Schluessler <marco@lordzodiac.de> Signed-off-by:
-
Michael Krufky authored
Add support for Terratec Cinergy HT PCI Signed-off-by:
Giorgio Moscardi <software@sukkology.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
The video_ioctl2 conversion replaced the default from NTSC to PAL_BG. This broke cx88-blackbird. Probably, there are some badness at this driver, not doing all required stuff to change video standard. Signed-off-by: -
Mauro Carvalho Chehab authored
This patch finishes cx88-blackbird conversion to use video_ioctl2. Video standards are generated automatically inside videodev.c. the big ioctl parser is removed, using, instead, video_ioctl2. Signed-off-by:
-
