- 04 Dec, 2013 9 commits
-
-
Sylwester Nawrocki authored
Simplify the driver by using the m2m ioctl and vb2 helpers. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Simplify the driver by using the m2m ioctl and vb2 helpers. Signed-off-by:
-
Sylwester Nawrocki authored
Simplify the FIMC mem-to-mem driver by using the m2m ioctl and vb2 helpers. Signed-off-by:
-
Sylwester Nawrocki authored
Simplify the driver by using the m2m ioctl and vb2 helpers. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds ioctl helpers to the V4L2 mem-to-mem API, so we can avoid several ioctl handlers in the mem-to-mem video node drivers that are simply a pass-through to the v4l2_m2m_* calls. These helpers will only be useful for drivers that use same mutex for both OUTPUT and CAPTURE queue, which is the case for all currently in tree v4l2 m2m drivers. In order to use the helpers the drivers are required to use struct v4l2_fh. Signed-off-by:
-
Sakari Ailus authored
The configuration of many other blocks depend on resizer maximum data rate. Get the value from resizer at link validation time. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
Mark pads that must be connected. Signed-off-by:
-
Sakari Ailus authored
Do not allow streaming if a pad with MEDIA_PAD_FL_MUST_CONNECT flag is not connected by an active link. This patch makes it possible to avoid drivers having to check for the most common case of link state validation: a sink pad that must be connected. Signed-off-by:
-
Sakari Ailus authored
Pads that set this flag must be connected by an active link for the entity to stream. Signed-off-by:
-
- 03 Dec, 2013 24 commits
-
-
Laurent Pinchart authored
The ioctl is (at least currently) mandatory. Signed-off-by:
-
Laurent Pinchart authored
The pad::get_fmt call must be protected by a mutex, but preparing its arguments doesn't need to be. Move the non-critical code out of the mutex-protected section. Signed-off-by:
-
Laurent Pinchart authored
Translating -ENOIOCTLCMD to -EINVAL is invalid, the correct ioctl return value is -ENOTTY. Signed-off-by:
-
Laurent Pinchart authored
The remote subdev of any video node in the OMAP4 ISS is an internal subdev that is guaranteed to implement get_fmt. Don't check the return value for -ENOIOCTLCMD, as this can't happen. Signed-off-by:
-
Laurent Pinchart authored
Get rid of a goto statement for a simple error path that can be inlined, and split spaghetti error code to a separate section. Signed-off-by:
-
Laurent Pinchart authored
The iss_device structure is allocated with kzalloc, there's no need to initialize its fields to 0 explicitly. Signed-off-by:
-
Laurent Pinchart authored
Loop counters that can only take positive values should be unsigned. Signed-off-by:
-
Laurent Pinchart authored
The functions always succeed, there's no need to return an error value. Signed-off-by:
-
Laurent Pinchart authored
The only udelay() call takes place in a sleepable context, we can sleep instead. Use usleep_range(). Signed-off-by:
-
Laurent Pinchart authored
The failure variable is initialized with 0 and used as a return value without ever being modified. Remove it and return 0 directly. Signed-off-by:
-
Laurent Pinchart authored
The video_unregister_device() function checks if the video device is registered before proceeding, remote the duplicate check from the driver. Signed-off-by:
-
Laurent Pinchart authored
Timestamps use the monotonic clock, configure the vb2 queue accordingly. Signed-off-by:
-
Laurent Pinchart authored
The vb2 queue already keeps track of the streaming state, there's no need to duplicate that in the driver. Signed-off-by:
-
Laurent Pinchart authored
Set the v4l2_capability capabilities and device_caps fields correctly. Signed-off-by:
-
Laurent Pinchart authored
Code common to all cases can be moved out of the switch...case statement. Signed-off-by:
-
Laurent Pinchart authored
Instead of using the extended control API internally to get the sensor pixel rate, use the dedicated in-kernel APIs (find the control with v4l2_ctrl_find() and get its value with v4l2_ctrl_g_ctrl_int64()). Signed-off-by:
-
Laurent Pinchart authored
This adds a very simplistic driver to utilize the CSI2A interface inside the ISS subsystem in OMAP4, and dump the data to memory. Check Documentation/video4linux/omap4_camera.txt for details. This commit adds and updates Kconfig's and Makefile's, as well as a TODO list. Signed-off-by:
-
Sergio Aguirre authored
This adds a very simplistic driver to utilize the CSI2A interface inside the ISS subsystem in OMAP4, and dump the data to memory. Check Documentation/video4linux/omap4_camera.txt for details. This commit adds resizer support. [Port the driver to v3.12-rc3, including the following changes - Don't include plat/ headers - Don't use cpu_is_omap44xx() macro - Don't depend on EXPERIMENTAL - Fix s_crop operation prototype - Update link_notify prototype - Rename media_entity_remote_source to media_entity_remote_pad] Signed-off-by:
Sergio Aguirre <sergio.a.aguirre@gmail.com> Signed-off-by:
-
Sergio Aguirre authored
This adds a very simplistic driver to utilize the CSI2A interface inside the ISS subsystem in OMAP4, and dump the data to memory. Check Documentation/video4linux/omap4_camera.txt for details. This commit adds the IPIPEIF and IPIPE processing blocks support. Signed-off-by:
-
Sergio Aguirre authored
This adds a very simplistic driver to utilize the CSI2A interface inside the ISS subsystem in OMAP4, and dump the data to memory. Check Documentation/video4linux/omap4_camera.txt for details. This commit adds CSI receivers support. Signed-off-by:
-
Sergio Aguirre authored
This adds a very simplistic driver to utilize the CSI2A interface inside the ISS subsystem in OMAP4, and dump the data to memory. Check Documentation/video4linux/omap4_camera.txt for details. This commit adds video devices support. Signed-off-by:
-
Sergio Aguirre authored
This adds a very simplistic driver to utilize the CSI2A interface inside the ISS subsystem in OMAP4, and dump the data to memory. Check Documentation/video4linux/omap4_camera.txt for details. This commit adds the driver core, registers definitions and documentation. Signed-off-by:
-
Sachin Kamat authored
'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Antti Palosaari authored
i2c i2c-6: adapter [RTL2830 tuner I2C adapter] registered BUG: unable to handle kernel NULL pointer dereference at 0000000000000220 IP: [<ffffffffa0002900>] i2c_register_adapter+0x130/0x390 [i2c_core] Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
- 29 Nov, 2013 7 commits
-
-
Libin Yang authored
This patch uses devm to release the clks instead of releasing manually. And it adds enable/disable mipi_clk when getting its rate. Signed-off-by:
Libin Yang <lbyang@marvell.com> Acked-by:
Jonathan Corbet <corbet@lwn.net> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Libin Yang authored
The mmp-driver is using devm_* to allocate the resource. The old resource release methods are not appropriate here. Signed-off-by:
-
Ricardo Ribalda authored
git grep shows that the function is only called from ths7303.c Fix this build warning: CC drivers/media/i2c/ths7303.o drivers/media/i2c/ths7303.c:86:5: warning: no previous prototype for ‘ths7303_setval’ [-Wmissing-prototypes] int ths7303_setval(struct v4l2_subdev *sd, enum ths7303_filter_mode mode) ^ Signed-off-by:Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Ricardo Ribalda authored
vb2_fop_release might take the video queue mutex lock. In order to avoid nesting mutexes the private mutex is taken after the fop_release has finished. Signed-off-by:
-
Georg Kaindl authored
Signed-off-by:
Georg Kaindl <gkaindl@mac.com> Tested-by:
Lubomir Rintel <lkundrak@v3.sk> Tested-by:
Marcin Nowak <marcin.nowak@simplusnet.pl> Signed-off-by:
-
Jonathan McCrohan authored
Fix various spelling errors in strings and comments throughout the media tree. The majority of these were found using Lucas De Marchi's codespell tool. [m.chehab@samsung.com: discard hunks with conflicts] Signed-off-by:
Jonathan McCrohan <jmccrohan@gmail.com> Signed-off-by:
-
Philipp Zabel authored
Currently it is not possible for userspace to map a DMABUF exported buffer with write permissions. This patch allows to also pass O_RDONLY/O_RDWR when exporting the buffer, so that userspace may map it with write permissions. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
