- 25 Apr, 2020 16 commits
-
-
Nuno Sá authored
This patch adds support for a managed device version of adis_setup_buffer_and_trigger. It works exactly as the original one but it calls all the devm_iio_* functions to setup an iio buffer and trigger. Hence we do not need to care about cleaning those and we do not need to support a remove() callback for every driver using the adis library. Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Alexandru Ardelean authored
The iio_triggered_buffer_{predisable,postenable} functions attach/detach poll functions. In most cases the iio_triggered_buffer_postenable() should be called first to attach the poll function, and then the driver can init the data to be triggered. In this case it's the other way around: the DMA code should be initialized before the attaching the poll function and the reverse should be done when un-initializing. To make things easier when removing the iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() functions from the IIO core API, the DMA code has been moved into preenable() for init, and postdisable() for uninit. Signed-off-by:Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Alexandru Ardelean authored
This change moves the logic to check if the current channel is the touchscreen channel to a separate helper. This reduces some code duplication, but the main intent is to re-use this in the next patches. Signed-off-by:
-
Eugen Hristev authored
This change will allow the at91-sama5d2_adc driver to use other triggers than it's own. In particular, tested with the sysfs trigger. To be able to achieve this functionality, some changes were required: 1) Do not enable/disable channels when enabling/disabling the trigger. This is because the trigger is enabled/disabled only for our trigger (obviously). We need channels enabled/disabled regardless of what trigger is being used. 2) Cope with DMA : DMA cannot be used when using another type of trigger. Other triggers work through pollfunc, so we get polled anyway on every trigger. Thus we have to obtain data at every trigger. 3) When to start conversion? The usual pollfunc (store time from subsystem) would be in hard irq and this would be a good way, but current iio subsystem recommends to have it in the threaded irq. Thus adding software start code in this handler. 4) Buffer config: we need to setup buffer regardless of our own device's trigger. We may get one attached later. 5) IRQ handling: we use our own device IRQ only if it's our own trigger and we do not use DMA . If we use DMA, we use the DMA controller's IRQ. Signed-off-by:
-
Eugen Hristev authored
It can happen that on IRQ trigger, not all conversions are done if we are enabling multiple channels. The IRQ is triggered on first EOC (end of channel), but it can happen that not all channels are done. This leads into erroneous reports to userspace (zero values or previous values). To solve this, in trigger handler, check if the mask of done channels is the same as the mask of active scan channels. If it's the same, proceed and push to buffers. Otherwise, use usleep to sleep until the conversion is done or we timeout. Normally, it should happen that in a short time fashion, all channels are ready, since the first IRQ triggered. If a hardware fault happens (for example the clock suddently dissappears), the handler will not be completed, in which case we do not report anything to userspace anymore. Also, change from using the EOC interrupts to DRDY interrupt. This helps with the fact that not 'n' interrupt statuses are enabled, each being able to trigger an interrupt, and instead only data ready interrupt can wake up the CPU. Like this, when data is ready, check in handler which and how many channels are done. While the DRDY is raised, other IRQs cannot occur. Once the channel data is being read, we ack the IRQ and finish the conversion. Signed-off-by:
-
Jonathan Cameron authored
Enables probing via ACPI PRP0001 route and removes an example of an approach we no longer want people to copy. Signed-off-by:
-
Jonathan Cameron authored
Enables probing via ACPI PRP0001 and removes an example that we don't want people to cut and paste into new drivers. Signed-off-by:
-
Jonathan Cameron authored
Enables probing via ACPI PRP0001 but mostly about removing examples that might be copied to new drivers. Signed-off-by:
-
Jonathan Cameron authored
Also drops ifdef protections for CONFIG_OF. Enables probing via ACPI PRP0001 and removes an example that might be cut and paste into new drivers. Signed-off-by:
-
Jonathan Cameron authored
Enables ACPI probing via PRP0001 and removes an example that might be cut and paste to a new driver. Signed-off-by:
-
Jonathan Cameron authored
Enables probing via the ACPI PRP0001 route but more is mosty about removing examples of this that might get copied into new drivers. Signed-off-by:
-
Jonathan Cameron authored
Whilst this enables ACPI binding or the device via PRP0001 the primary aim is to remove potential for these two things to be cut and paste into new drivers. Signed-off-by:
-
Nishant Malpani authored
Enables ACPI DSDT to probe via PRP0001 and the compatible property. Also removes the ifdef protections for CONFIG_OF. Signed-off-by:
Nishant Malpani <nish.malpani25@gmail.com> Signed-off-by:
-
Nishant Malpani authored
Enables ACPI DSDT to probe via PRP0001 and the compatible property. Signed-off-by:
-
Matt Ranostay authored
Atlas Scientific RTD-SM OEM sensor reads temperature using resistance temperature detector technology. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Matt Ranostay authored
Cc: devicetree@vger.kernel.org Signed-off-by:
-
- 23 Apr, 2020 24 commits
-
-
Oscar Carter authored
Replace the for loops of the vnt_update_top_rates function by the fls function. The purpose of the two for loops is to find the most significant bit set in a range of bits. So, they can be replace by the fls function (find last set) with a previous mask to define the range. This way avoid the iteration over unnecessary for loops. The header "linux/bits.h" can be remove as it is included in the header "linux/bitops.h". Signed-off-by:
Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200420155246.4925-1-oscar.carter@gmx.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oscar Carter authored
Replace the for loop by a ternary operator whose condition is an AND bitmask against the priv->basic_rates variable. The purpose of the for loop was to check if any of bits from RATE_54M to RATE_6M was set, but it's not necessary to check every individual bit. The same result can be achieved using only one single mask which comprises all the commented bits. This way avoid the iteration over an unnecessary for loop. Also change the return type to bool because it's the type that this function returns. Signed-off-by:
-
Xiyu Yang authored
gasket_sysfs_register_store() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt. When gasket_sysfs_register_store() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of gasket_sysfs_register_store(). When gasket_dev is NULL, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak. Fix this issue by calling put_mapping() when gasket_dev is NULL. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by:
-
Xiyu Yang authored
gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt. When gasket_sysfs_put_attr() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one path of gasket_sysfs_put_attr(). When mapping attribute is unknown, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak. Fix this issue by calling put_mapping() when put attribute fails due to unknown attribute. Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c:223:14-36: WARNING: Use correct pointer type argument for sizeof Signed-off-by:
Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200420133416.3087-1-yanaijie@huawei.comSigned-off-by:
-
realwakka authored
Replace legacy/depreacted pci_dma_* functions to new dma_* functions. Also replace PCI_DMA_* macro to DMA* macro. Signed-off-by:
realwakka <realwakka@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200420154009.21161-1-realwakka@gmail.comSigned-off-by:
-
Mathieu Dolmen authored
Cleanup indentation style in qlge_main.c. Fix 2 warnings found by checkpatch.pl. Signed-off-by:
Mathieu Dolmen <mathieu.dolmen@gmail.com> Link: https://lore.kernel.org/r/20200419125712.27506-1-mathieu.dolmen@gmail.comSigned-off-by:
-
Malcolm Priestley authored
These functions are only used by rxtx so move them and their arrays used with them abbreviating the function description. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/2a4fd665-2fe1-f1ad-1e9a-1b01f698ea79@gmail.comSigned-off-by:
-
Malcolm Priestley authored
vnt_update_pre_ed_threshold needs to be updated more often so call from vnt_config where it updated on any of config changes. It must have maximum sensitivity when the device is off channel or idle. Remove all the other calls in scanning and bss. Signed-off-by:
-
Malcolm Priestley authored
The firmware function are not that complicated so move them into main_usb as static functions in callers visibility Firmware definitions moved to device.h and MODULE_FIRMWARE move to below module_usb_driver. Signed-off-by:
-
Denis Straghkov authored
Add size check of SSID information element in incoming 802.11 frames, to prevent memcpy() of IE in array bssid->Ssid.Ssid, with size more than 32 bytes. Signed-off-by:
Denis Straghkov <d.straghkov@ispras.ru> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200421212525.24962-1-d.straghkov@ispras.ruSigned-off-by:
-
YueHaibing authored
drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function HalRxAggr8723BSdio: drivers/staging/rtl8723bs/hal/sdio_halinit.c:547:24: warning: variable pregistrypriv set but not used [-Wunused-but-set-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200421024145.43576-1-yuehaibing@huawei.comSigned-off-by:
-
Jason Yan authored
Fix the following gcc warning: drivers/staging/rtl8723bs/hal/odm.c:10:18: warning: ‘dB_Invert_Table’ defined but not used [-Wunused-const-variable=] static const u16 dB_Invert_Table[8][12] = { ^~~~~~~~~~~~~~~ Reported-by: -
Jason Yan authored
Fix the following gcc warning: drivers/staging/rtl8723bs/hal/hal_btcoex.c:45:26: warning: ‘ioStaString’ defined but not used [-Wunused-const-variable=] static const char *const ioStaString[] = { ^~~~~~~~~~~ drivers/staging/rtl8723bs/hal/hal_btcoex.c:38:26: warning: ‘h2cStaString’ defined but not used [-Wunused-const-variable=] static const char *const h2cStaString[] = { ^~~~~~~~~~~~ drivers/staging/rtl8723bs/hal/hal_btcoex.c:33:26: warning: ‘BtLinkRoleString’ defined but not used [-Wunused-const-variable=] static const char *const BtLinkRoleString[] = { ^~~~~~~~~~~~~~~~ drivers/staging/rtl8723bs/hal/hal_btcoex.c:23:26: warning: ‘BtSpecString’ defined but not used [-Wunused-const-variable=] static const char *const BtSpecString[] = { ^~~~~~~~~~~~ drivers/staging/rtl8723bs/hal/hal_btcoex.c:15:26: warning: ‘BtProfileString’ defined but not used [-Wunused-const-variable=] static const char *const BtProfileString[] = { ^~~~~~~~~~~~~~~ Reported-by: -
Jérôme Pouiller authored
The field join_complete_status is never read. Drop it. Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200420160311.57323-17-Jerome.Pouiller@silabs.comSigned-off-by:
-
Jérôme Pouiller authored
In former code, the field wvif->state was more or less redundant with vif->type. With the lasts change it has become unused. It is now time to drop it. Signed-off-by:
-
Jérôme Pouiller authored
In wfx_remove_interface(), the current code differentiate AP and Station cases. However, it is not necessary. In all cases, the only important thing is the call to hif_reset(). We can use the same code to support all cases. Signed-off-by:
-
Jérôme Pouiller authored
The callers of wfx_do_unjoin() already take care of vif state. Therefore, it is not necessary to take care of the status of the interface. Signed-off-by:
-
Jérôme Pouiller authored
In former code (before the inclusion of the driver in mainline kernel), hif_join() could run asynchronously. When a join request was in progress, it was forbidden to launch hif_scan(). Now, hif_join() is always run synchronously. There is no more reasons to keep a protection against this case. Signed-off-by:
-
Jérôme Pouiller authored
Keys sent to the firmware are never reset. So, it is not necessary to re-upload them after hif_reset(). Thus, it is no more necessary to keep a copy of the keys in struct wfx_dev. Signed-off-by:
-
Jérôme Pouiller authored
Currently code handle WEP keys manually. It is far easier to use the set_default_unicast_key() callback provided by mac80211. Signed-off-by:
-
Jérôme Pouiller authored
Basic Rates are already set by hif_join(). hif_join() is also able to manage possible changes after association. Firmware also allows to change the Basic Rates with hif_set_association_mode() but it does not bring anything in our case. Signed-off-by:
-
Jérôme Pouiller authored
The structure hif_req_set_bss_params come from hardware API. It is not intended to be manipulated in upper layers of the driver. In add, current code for hif_req_set_bss_params() is too dumb. It should pack data with hardware representation instead of leaving all work to the caller. Signed-off-by:
-
Jérôme Pouiller authored
The field bss_params.operational_rate_set is ignore by the firmware. It is not necessary to send it. This change greatly simplify wfx_join_finalize(). It is no more necessary to get sta and it allow to save a RCU. Signed-off-by:
-
