Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Roland Stigge <stigge@antcom.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 957f822a ("mm, numa: reclaim from all nodes within reclaim
distance") caused zone_reclaim_mode to be set for all systems where two
nodes are within RECLAIM_DISTANCE of each other.  This is the opposite
of what we actually want: zone_reclaim_mode should be set if two nodes
are sufficiently distant.
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Julian Wollrath <jwollrath@web.de>
Tested-by: Julian Wollrath <jwollrath@web.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Patrik Kullman <patrik.kullman@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

'struct pid' is a "variable sized struct" - a header with an array of
upids at the end.

The size of the array depends on a level (depth) of pid namespaces.  Now a
level of pidns is not limited, so 'struct pid' can be more than one page.

Looks reasonable, that it should be less than a page.  MAX_PIS_NS_LEVEL is
not calculated from PAGE_SIZE, because in this case it depends on
architectures, config options and it will be reduced, if someone adds a
new fields in struct pid or struct upid.

I suggest to set MAX_PIS_NS_LEVEL = 32, because it saves ability to expand
"struct pid" and it's more than enough for all known for me use-cases.
When someone finds a reasonable use case, we can add a config option or a
sysctl parameter.

In addition it will reduce the effect of another problem, when we have
many nested namespaces and the oldest one starts dying.
zap_pid_ns_processe will be called for each namespace and find_vpid will
be called for each process in a namespace.  find_vpid will be called
minimum max_level^2 / 2 times.  The reason of that is that when we found a
bit in pidmap, we can't determine this pidns is top for this process or it
isn't.

vpid is a heavy operation, so a fork bomb, which create many nested
namespace, can make a system inaccessible for a long time.  For example my
system becomes inaccessible for a few minutes with 4000 processes.

[akpm@linux-foundation.org: return -EINVAL in response to excessive nesting, not -ENOMEM]
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The dw_dmac driver was originally developed for avr32 to be used with the
Synopsys DesignWare AHB DMA controller.  Starting from 2.6.38, access to
the device's i/o memory was done with the little-endian readl/writel
functions(1)

This broke the driver for the avr32 platform, because it needs big
(native) endian accessors.  This patch makes the endianness configurable
using 'DW_DMAC_BIG_ENDIAN_IO', which will default be true for AVR32

I submitted this patch before(2) but then waited for Andy to finish other
changes to the same module(3).

(1) https://patchwork.kernel.org/patch/608211
(2) https://lkml.org/lkml/2012/8/26/148
(3) https://lkml.org/lkml/2012/9/21/173Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Havard Skinnemoen <havard@skinnemoen.net>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While allocating mmu_notifier with parameter GFP_KERNEL, swap would start
to work in case of tight available memory.  Eventually, that would lead to
a deadlock while the swap deamon swaps anonymous pages.  It was caused by
commit e0f3c3f7 ("mm/mmu_notifier: init notifier if necessary").

  =================================
  [ INFO: inconsistent lock state ]
  3.7.0-rc1+ #518 Not tainted
  ---------------------------------
  inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
  kswapd0/35 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (&mapping->i_mmap_mutex){+.+.?.}, at: page_referenced+0x9c/0x2e0
  {RECLAIM_FS-ON-W} state was registered at:
     mark_held_locks+0x86/0x150
     lockdep_trace_alloc+0x67/0xc0
     kmem_cache_alloc_trace+0x33/0x230
     do_mmu_notifier_register+0x87/0x180
     mmu_notifier_register+0x13/0x20
     kvm_dev_ioctl+0x428/0x510
     do_vfs_ioctl+0x98/0x570
     sys_ioctl+0x91/0xb0
     system_call_fastpath+0x16/0x1b
  irq event stamp: 825
  hardirqs last  enabled at (825): _raw_spin_unlock_irq+0x30/0x60
  hardirqs last disabled at (824): _raw_spin_lock_irq+0x19/0x80
  softirqs last  enabled at (0): copy_process+0x630/0x17c0
  softirqs last disabled at (0): (null)
  ...

Simply back out the above commit, which was a small performance
optimization.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Reported-by: Andrea Righi <andrea@betterlinux.com>
Tested-by: Andrea Righi <andrea@betterlinux.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Sagi Grimberg <sagig@mellanox.co.il>
Cc: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Latest Linus head run of "make selftests" in the tools directory failed
with references to undefined variables.  Reference was to
'write_thread_data' which is the name of a struct that is being used, not
the variable itself.  Change reference so it points to the variable.
Signed-off-by: Daniel Hazelton <dshadowwolf@gmail.com>
Cc: "Paton J. Lewis" <palewis@adobe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix tools/vm/page-types.c to use the UAPI variant of linux/kernel-page-flags.h
lest the following error appear:

  In file included from page-types.c:38:0:
    ../../include/linux/kernel-page-flags.h:4:42: fatal error:
    uapi/linux/kernel-page-flags.h: No such file or directory
Reported-by: Daniel Hazelton <dshadowwolf@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Daniel Hazelton <dshadowwolf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If start_isolate_page_range() failed, unset_migratetype_isolate() has been
done inside it.
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Ni zhan Chen <nizhan.chen@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rb_erase_augmented() is a static function annotated with
__always_inline.  This causes a compile failure when attempting to use
the rbtree implementation as a library (e.g.  kvm tool):

  rbtree_augmented.h:125:24: error: expected `=', `,', `;', `asm' or `__attribute__' before `void'

Include linux/compiler.h in rbtree_augmented.h so that the __always_inline
macro is resolved correctly.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The genalloc code uses the bitmap API from include/linux/bitmap.h and
lib/bitmap.c, which is based on long values.  Both bitmap_set from
lib/bitmap.c and bitmap_set_ll, which is the lockless version from
genalloc.c, use BITMAP_LAST_WORD_MASK to set the first bits in a long in
the bitmap.

That one uses (1 << bits) - 1, 0b111, if you are setting the first three
bits.  This means that the API counts from the least significant bits
(LSB from now on) to the MSB.  The LSB in the first long is bit 0, then.
The same works for the lookup functions.

The genalloc code uses longs for the bitmap, as it should.  In
include/linux/genalloc.h, struct gen_pool_chunk has unsigned long
bits[0] as its last member.  When allocating the struct, genalloc should
reserve enough space for the bitmap.  This should be a proper number of
longs that can fit the amount of bits in the bitmap.

However, genalloc allocates an integer number of bytes that fit the
amount of bits, but may not be an integer amount of longs.  9 bytes, for
example, could be allocated for 70 bits.

This is a problem in itself if the Least Significat Bit in a long is in
the byte with the largest address, which happens in Big Endian machines.
This means genalloc is not allocating the byte in which it will try to
set or check for a bit.

This may end up in memory corruption, where genalloc will try to set the
bits it has not allocated.  In fact, genalloc may not set these bits
because it may find them already set, because they were not zeroed since
they were not allocated.  And that's what causes a BUG when
gen_pool_destroy is called and check for any set bits.

What really happens is that genalloc uses kmalloc_node with __GFP_ZERO
on gen_pool_add_virt.  With SLAB and SLUB, this means the whole slab
will be cleared, not only the requested bytes.  Since struct
gen_pool_chunk has a size that is a multiple of 8, and slab sizes are
multiples of 8, we get lucky and allocate and clear the right amount of
bytes.

Hower, this is not the case with SLOB or with older code that did memset
after allocating instead of using __GFP_ZERO.

So, a simple module as this (running 3.6.0), will cause a crash when
rmmod'ed.

  [root@phantom-lp2 foo]# cat foo.c
  #include <linux/kernel.h>
  #include <linux/module.h>
  #include <linux/init.h>
  #include <linux/genalloc.h>

  MODULE_LICENSE("GPL");
  MODULE_VERSION("0.1");

  static struct gen_pool *foo_pool;

  static __init int foo_init(void)
  {
          int ret;
          foo_pool = gen_pool_create(10, -1);
          if (!foo_pool)
                  return -ENOMEM;
          ret = gen_pool_add(foo_pool, 0xa0000000, 32 << 10, -1);
          if (ret) {
                  gen_pool_destroy(foo_pool);
                  return ret;
          }
          return 0;
  }

  static __exit void foo_exit(void)
  {
          gen_pool_destroy(foo_pool);
  }

  module_init(foo_init);
  module_exit(foo_exit);
  [root@phantom-lp2 foo]# zcat /proc/config.gz | grep SLOB
  CONFIG_SLOB=y
  [root@phantom-lp2 foo]# insmod ./foo.ko
  [root@phantom-lp2 foo]# rmmod foo
  ------------[ cut here ]------------
  kernel BUG at lib/genalloc.c:243!
  cpu 0x4: Vector: 700 (Program Check) at [c0000000bb0e7960]
      pc: c0000000003cb50c: .gen_pool_destroy+0xac/0x110
      lr: c0000000003cb4fc: .gen_pool_destroy+0x9c/0x110
      sp: c0000000bb0e7be0
     msr: 8000000000029032
    current = 0xc0000000bb0e0000
    paca    = 0xc000000006d30e00   softe: 0        irq_happened: 0x01
      pid   = 13044, comm = rmmod
  kernel BUG at lib/genalloc.c:243!
  [c0000000bb0e7ca0] d000000004b00020 .foo_exit+0x20/0x38 [foo]
  [c0000000bb0e7d20] c0000000000dff98 .SyS_delete_module+0x1a8/0x290
  [c0000000bb0e7e30] c0000000000097d4 syscall_exit+0x0/0x94
  --- Exception: c00 (System Call) at 000000800753d1a0
  SP (fffd0b0e640) is in userspace
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Benjamin Gaignard <benjamin.gaignard@stericsson.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add this missing SPI dependency and prevent the driver from building
without SPI, because functions of the spi driver are used in this
driver.

  drivers/video/backlight/ili9320.c:51: undefined reference to `spi_sync'

Also, a prompt string for CONFIG_LCD_ILI9320 is added for explicit
selection.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Before changing a group's default behavior to ALLOW, we must check if
its parent's behavior is also ALLOW.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: James Morris <jmorris@namei.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert the code to use kstrtou32() instead of simple_strtoul() which is
deprecated.  The real size of the variables are u32, so use kstrtou32
instead of kstrtoul
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: James Morris <jmorris@namei.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was done in a v2 patch but v1 ended up being committed.  The
variable name is less confusing and stores the default behavior when no
matching exception exists.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: James Morris <jmorris@namei.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit ad676077 ("device_cgroup: convert device_cgroup internally to
policy + exceptions") removed rcu locks which are needed in
task_devcgroup called in this chain:

  devcgroup_inode_mknod OR __devcgroup_inode_permission ->
    __devcgroup_inode_permission ->
      task_devcgroup ->
        task_subsys_state ->
          task_subsys_state_check.

Change the code so that task_devcgroup is safely called with rcu read
lock held.

  ===============================
  [ INFO: suspicious RCU usage. ]
  3.6.0-rc5-next-20120913+ #42 Not tainted
  -------------------------------
  include/linux/cgroup.h:553 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 0
  2 locks held by kdevtmpfs/23:
   #0:  (sb_writers){.+.+.+}, at: [<ffffffff8116873f>]
  mnt_want_write+0x1f/0x50
   #1:  (&sb->s_type->i_mutex_key#3/1){+.+.+.}, at: [<ffffffff811558af>]
  kern_path_create+0x7f/0x170

  stack backtrace:
  Pid: 23, comm: kdevtmpfs Not tainted 3.6.0-rc5-next-20120913+ #42
  Call Trace:
    lockdep_rcu_suspicious+0xfd/0x130
    devcgroup_inode_mknod+0x19d/0x240
    vfs_mknod+0x71/0xf0
    handle_create.isra.2+0x72/0x200
    devtmpfsd+0x114/0x140
    ? handle_create.isra.2+0x200/0x200
    kthread+0xd6/0xe0
    kernel_thread_helper+0x4/0x10
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Dave Jones <davej@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: James Morris <jmorris@namei.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On s390 any write to a page (even from kernel itself) sets architecture
specific page dirty bit.  Thus when a page is written to via buffered
write, HW dirty bit gets set and when we later map and unmap the page,
page_remove_rmap() finds the dirty bit and calls set_page_dirty().

Dirtying of a page which shouldn't be dirty can cause all sorts of
problems to filesystems.  The bug we observed in practice is that
buffers from the page get freed, so when the page gets later marked as
dirty and writeback writes it, XFS crashes due to an assertion
BUG_ON(!PagePrivate(page)) in page_buffers() called from
xfs_count_page_state().

Similar problem can also happen when zero_user_segment() call from
xfs_vm_writepage() (or block_write_full_page() for that matter) set the
hardware dirty bit during writeback, later buffers get freed, and then
page unmapped.

Fix the issue by ignoring s390 HW dirty bit for page cache pages of
mappings with mapping_cap_account_dirty().  This is safe because for
such mappings when a page gets marked as writeable in PTE it is also
marked dirty in do_wp_page() or do_page_fault().  When the dirty bit is
cleared by clear_page_dirty_for_io(), the page gets writeprotected in
page_mkclean().  So pagecache page is writeable if and only if it is
dirty.

Thanks to Hugh Dickins for pointing out mapping has to have
mapping_cap_account_dirty() for things to work and proposing a cleaned
up variant of the patch.

The patch has survived about two hours of running fsx-linux on tmpfs
while heavily swapping and several days of running on out build machines
where the original problem was triggered.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org>		[3.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi fixes from Mark Brown:
 "A bunch of fixes here, mostly minor except for the pl022 which has
  just been a bit of a shambles all round, the recent runtime PM changes
  have as far as I can tell never worked so they're just getting thrown
  out."

* tag 'spi-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/pl022: Revert recent runtime PM changes
  spi: tsc2005: delete soon-obsolete e-mail address
  spi: spi-rspi: fix build error for the latest shdma driver

Pull IOMMU fixes from Joerg Roedel:
 "Two fixes this time:

   1. Another fix for a broken BIOS to detect when AMD IOMMU interrupt
      remapping can not work reliably
   2. Typo fix for NVidia IOMMU driver"

* tag 'iommu-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/tegra: smmu: Fix deadly typo
  iommu/amd: Work around wrong IOAPIC device-id in IVRS table

Pull pinctrl fixes from Linus Walleij:
 "This fixes a few pinctrl problems seen since v3.7-rc1:
   - Section tagging for init code
   - Use proper pointers to lookup struct device * in the bcm2835
     (a.k.a.  Raspberry Pi)
   - Remove duplicate #includes
   - Fix bad return values in errorpath
   - Remove extraneous pull function from the sirf driver causing build
     errors
   - Provide compilation stubs for the Nomadik pinctrl driver when used
     with legacy systems without PRCMU units
   - Various irqdomain fixes in the Nomadik driver as predicted
   - Various smallish bugs in the Tegra driver, most also targeted for
     stable
   - Removed a deadlocking mutex in the groups debugfs show function"

* tag 'pinctrl-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl/nomadik: pass DT node to the irqdomain
  pinctrl/nomadik: use zero as default irq_start
  pinctrl: fix missing unlock on error in pinctrl_groups_show()
  pinctrl/nomadik: use irq_create_mapping()
  pinctrl: remove mutex lock in groups show
  pinctrl: tegra: correct bank for pingroup and drv pingroup
  pinctrl: tegra: set low power mode bank width to 2
  dt: Document: correct tegra20/30 pinctrl slew-rate name

Pull apparmor bugfix from James Morris.

Fix a possibly unbounded recursion by iterating over the entries instead.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  apparmor: fix IRQ stack overflow during free_profile

Pull amd64_edac fix from Borislav Petkov:
 "An array out-of-bounds fix from Andrew when setting the scrub rate of
  the memory controller."

* tag 'edac_scrubrates_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]

Pull cgroup fixes from Tejun Heo:
 "This pull request contains three fixes.

  Two are reverts of task_lock() removal in cgroup fork path.  The
  optimizations incorrectly assumed that threadgroup_lock can protect
  process forks (as opposed to thread creations) too.  Further cleanup
  of cgroup fork path is scheduled.

  The third fixes cgroup emptiness notification loss."

* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Revert "cgroup: Remove task_lock() from cgroup_post_fork()"
  Revert "cgroup: Drop task_lock(parent) on cgroup_fork()"
  cgroup: notify_on_release may not be triggered in some cases

Pull workqueue fix from Tejun Heo:
 "This pull request contains one patch from Dan Magenheimer to fix
  cancel_delayed_work() regression introduced by its reimplementation
  using try_to_grab_pending().  The reimplementation made it incorrectly
  return %true when the work item is idle.

  There aren't too many consumers of the return value but it broke at
  least ramster."

* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: cancel_delayed_work() should return %false if work item is idle

57b30ae7 ("workqueue: reimplement cancel_delayed_work() using
try_to_grab_pending()") made cancel_delayed_work() always return %true
unless someone else is also trying to cancel the work item, which is
broken - if the target work item is idle, the return value should be
%false.

try_to_grab_pending() indicates that the target work item was idle by
zero return value.  Use it for return.  Note that this brings
cancel_delayed_work() in line with __cancel_work_timer() in return
value handling.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <444a6439-b1a4-4740-9e7e-bc37267cfe73@default>

BugLink: http://bugs.launchpad.net/bugs/1056078

Profile replacement can cause long chains of profiles to build up when
the profile being replaced is pinned. When the pinned profile is finally
freed, it puts the reference to its replacement, which may in turn nest
another call to free_profile on the stack. Because this may happen for
each profile in the replacedby chain this can result in a recusion that
causes the stack to overflow.

Break this nesting by directly walking the chain of replacedby profiles
(ie. use iteration instead of recursion to free the list). This results
in at most 2 levels of free_profile being called, while freeing a
replacedby chain.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Fix a deadly typo in macro definition.

Cc: stable@vger.kernel.org
Signed-off-by: Hiro Sugawara <hsugawara@nvidia.com>
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

If none of the elements in scrubrates[] matches, this loop will cause
__amd64_set_scrub_rate() to incorrectly use the n+1th element.

As the function is designed to use the final scrubrates[] element in the
case of no match, we can fix this bug by simply terminating the array
search at the n-1th element.

Boris: this code is fragile anyway, see here why:
http://marc.info/?l=linux-kernel&m=135102834131236&w=2

It will be rewritten more robustly soonish.
Reported-by: Denis Kirjanov <kirjanov@gmail.com>
Cc: stable@vger.kernel.org
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

Merge tag 'stable/for-linus-3.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull xen bug-fixes from Konrad Rzeszutek Wilk:
 - Fix mysterious SIGSEGV or SIGKILL in applications due to corrupting
   of the %eip when returning from a signal handler.
 - Fix various ARM compile issues after the merge fallout.
 - Continue on making more of the Xen generic code usable by ARM
   platform.
 - Fix SR-IOV passthrough to mirror multifunction PCI devices.
 - Fix various compile warnings.
 - Remove hypercalls that don't exist anymore.

* tag 'stable/for-linus-3.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: dbgp: Fix warning when CONFIG_PCI is not enabled.
  xen: arm: comment on why 64-bit xen_pfn_t is safe even on 32 bit
  xen: balloon: use correct type for frame_list
  xen/x86: don't corrupt %eip when returning from a signal handler
  xen: arm: make p2m operations NOPs
  xen: balloon: don't include e820.h
  xen: grant: use xen_pfn_t type for frame_list.
  xen: events: pirq_check_eoi_map is X86 specific
  xen: XENMEM_translate_gpfn_list was remove ages ago and is unused.
  xen: sysfs: fix build warning.
  xen: sysfs: include err.h for PTR_ERR etc
  xen: xenbus: quirk uses x86 specific cpuid
  xen PV passthru: assign SR-IOV virtual functions to separate virtual slots
  xen/xenbus: Fix compile warning.
  xen/x86: remove duplicated include from enlighten.c

... and fix the race in updating unaligned control ones
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm fixes from Avi Kivity:
 "KVM updates for 3.7-rc2"

* tag 'kvm-3.7-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM guest: exit idleness when handling KVM_PV_REASON_PAGE_NOT_PRESENT
  KVM: apic: fix LDR calculation in x2apic mode
  KVM: MMU: fix release noslot pfn

Pull perf fixes from Ingo Molnar:
 "Most of these are uprobes race fixes from Oleg, and their preparatory
  cleanups.  (It's larger than what I'd normally send for an -rc kernel,
  but they looked significant enough to not delay them.)

  There's also an oprofile fix and an uncore PMU fix."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  perf/x86: Disable uncore on virtualized CPUs
  oprofile, x86: Fix wrapping bug in op_x86_get_ctrl()
  ring-buffer: Check for uninitialized cpu buffer before resizing
  uprobes: Fix the racy uprobe->flags manipulation
  uprobes: Fix prepare_uprobe() race with itself
  uprobes: Introduce prepare_uprobe()
  uprobes: Fix handle_swbp() vs unregister() + register() race
  uprobes: Do not delete uprobe if uprobe_unregister() fails
  uprobes: Don't return success if alloc_uprobe() fails
  uprobes/x86: Only rep+nop can be emulated correctly
  uprobes: Simplify is_swbp_at_addr(), remove stale comments
  uprobes: Kill set_orig_insn()->is_swbp_at_addr()
  uprobes: Introduce copy_opcode(), kill read_opcode()
  uprobes: Kill set_swbp()->is_swbp_at_addr()
  uprobes: Restrict valid_vma(false) to skip VM_SHARED vmas
  uprobes: Change valid_vma() to demand VM_MAYEXEC rather than VM_EXEC
  uprobes: Change write_opcode() to use FOLL_FORCE
  uprobes: Move clear_thread_flag(TIF_UPROBE) to uprobe_notify_resume()
  uprobes: Kill UTASK_BP_HIT state
  uprobes: Fix UPROBE_SKIP_SSTEP checks in handle_swbp()
  ...

Pull core kernel fixes from Ingo Molnar:
 "Two small fixes"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: Reflect the new location of the NMI watchdog info
  nohz: Fix idle ticks in cpu summary line of /proc/stat

Pull s390 fixes from Martin Schwidefsky:
 "Among the usual minor bug fixes the more interesting patches are the
  perf counters for the latest machine, the missing select to enable
  transparent huge pages and a build fix for the UAPI rework."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390,uapi: do not use uapi/asm-generic/kvm_para.h
  s390/cache: fix data/instruction cache output
  s390: fix linker script for 31 bit builds
  s390/thp: select HAVE_ARCH_TRANSPARENT_HUGEPAGE
  s390/kdump: Use 64 bit mode for 0x10000 entry point
  perf_cpum_cf: Add support for counters available with IBM zEC12
  s390/css: stop stsch loop after cc 3
  s390/cio: use generic bitmap functions
  s390/chpid: make headers usable (again)

Pull tile fixes from Chris Metcalf:
 "This fixes one issue with compiler flags that can cause modules not to
  load, and cleans up some warnings with ELF_R_xxx defines."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: avoid build warnings from duplicate ELF_R_xxx #defines
  arch/tile: avoid generating .eh_frame information in modules

Pull ia64 fix from Tony Luck:
 "Fix from dhowells for UAPI fallout"

* tag 'please-pull-uapi-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  UAPI: Make arch/ia64/include/asm/kvm_para.h generic

These are now provided in <asm-generic/module.h>, so clean up warnings
by not re-defining them in module.c.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>

The tile tool chain uses the .eh_frame information for backtracing.
The vmlinux build drops any .eh_frame sections at link time, but when
present in kernel modules, it causes a module load failure due to the
presence of unsupported pc-relative relocations.  When compiling to
use compiler feedback support, the compiler by default omits .eh_frame
information, so we don't see this problem.  But when not using feedback,
we need to explicitly suppress the .eh_frame.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: stable@vger.kernel.org

[Originally sent by Ulf as two changes, squashed down into one with a
redone changelog, thanks to Russell King for analysis. -- broonie]

This reverts commit 688723 (spi/pl022: enable runtime PM) and commit
2fb30d (spi/pl022: fix spi-pl022 pm enable at probe).

Commit "spi/pl022: enable runtime PM" introduced runtime PM issues as it
interacted badly with the work Russell King had done to move core
runtime PM handling into the bus.  Due to that commit, "spi/pl022: fix
spi-pl022 pm enable at probe" was merged to fix part of those issues.

Instead of adding another fix, let's clean up and revert everything
back to when it was already fine.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Revert "spi/pl022: enable runtime PM"

Conflicts:
	drivers/spi/spi-pl022.c

When creating the simple irqdomain, pass the DT node pointer along,
as is apropriate.
Acked-by: Lee Jones <lee.jones@linaro.org>
Reported-by: Gabriel Fernandez <gabriel.fernandez@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The irqdomain semantics were supposed to be such that a linear
domain would be used if the passed first_irq was zero or
negative, but I got it wrong so only passing zero as first_irq
will work properly. Well, zero is NO_IRQ these days so let's
pass zero. The semantics of irqdomain_add_simple() will be
fixed in a separate patch.
Acked-by: Lee Jones <lee.jones@linaro.org>
Reported-by: Rikard Olsson <rikard.p.olsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>