commit 956959f6 upstream.

The -i flag was incorrectly listed as a short flag for --no-inherit.  It
should have only been listed as a short flag for --input.

This documentation error has existed since the --input flag was
introduced in 6810fc91 (perf trace: Add
option to analyze events in a file versus live).
Signed-off-by: Peter Feiner <pfeiner@google.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1446657706-14518-1-git-send-email-pfeiner@google.com
Fixes: 6810fc91 ("perf trace: Add option to analyze events in a file versus live")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit ebac62fe upstream.

Both tunnel6_protocol and tunnel46_protocol share the same error
handler, tunnel6_err(), which traverses through tunnel6_handlers list.
For ipip6 tunnels, we need to traverse tunnel46_handlers as we do e.g.
in tunnel46_rcv(). Current code can generate an ICMPv6 error message
with an IPv4 packet embedded in it.

Fixes: 73d605d1 ("[IPSEC]: changing API of xfrm6_tunnel_register")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit f25319d2 upstream.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fixes: f24219b4
(cherry picked from commit f0a232cde7be18a207fd057dd79bbac8a0a45dec)
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 1f35d04a upstream.

The iomap[] array has PCIM_IOMAP_MAX (6) elements and not
DEVICE_COUNT_RESOURCE (16).  This bug was found using a static checker.
It may be that the "if (!(mask & (1 << i)))" check means we never
actually go past the end of the array in real life.

Fixes: ec04b075 ('iomap: implement pcim_iounmap_regions()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 39416677 upstream.

We replace __fls() by __ffs() since we have to find a *minimum* data width that
satisfies both source and destination.

While here, rename dwc_fast_fls() to dwc_fast_ffs() which it really is.

Fixes: 4c2d56c5 (dw_dmac: introduce dwc_fast_fls())
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 1f9c6e1b upstream.

There were several bugs here.

1)  The done label was in the wrong place so we didn't copy any
    information out when there was no command given.

2)  We were using PAGE_SIZE as the size of the buffer instead of
    "PAGE_SIZE - pos".

3)  snprintf() returns the number of characters that would have been
    printed if there were enough space.  If there was not enough space
    (and we had fixed the memory corruption bug #2) then it would result
    in an information leak when we do simple_read_from_buffer().  I've
    changed it to use scnprintf() instead.

I also removed the initialization at the start of the function, because
I thought it made the code a little more clear.

Fixes: 5e6e3a92 ('wireless: mwifiex: initial commit for Marvell mwifiex driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 90adf98d upstream.

Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.

scripts/coccinelle/misc/irqf_oneshot.cocci detected this issue.

Fixes: b5874f33 ("wm831x_power: Use genirq")
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b582ef5c upstream.

Do not clobber the buffer space passed from `search_binary_handler' and
originally preloaded by `prepare_binprm' with the executable's file
header by overwriting it with its interpreter's file header.  Instead
keep the buffer space intact and directly use the data structure locally
allocated for the interpreter's file header, fixing a bug introduced in
2.1.14 with loadable module support (linux-mips.org commit beb11695
[Import of Linux/MIPS 2.1.14], predating kernel.org repo's history).
Adjust the amount of data read from the interpreter's file accordingly.

This was not an issue before loadable module support, because back then
`load_elf_binary' was executed only once for a given ELF executable,
whether the function succeeded or failed.

With loadable module support supported and enabled, upon a failure of
`load_elf_binary' -- which may for example be caused by architecture
code rejecting an executable due to a missing hardware feature requested
in the file header -- a module load is attempted and then the function
reexecuted by `search_binary_handler'.  With the executable's file
header replaced with its interpreter's file header the executable can
then be erroneously accepted in this subsequent attempt.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 102f4d90 upstream.

Handle a write being requested to the page immediately beyond the EOF
marker on a cache object.  Currently this gets an assertion failure in
CacheFiles because the EOF marker is used there to encode information about
a partial page at the EOF - which could lead to an unknown blank spot in
the file if we extend the file over it.

The problem is actually in fscache where we check the index of the page
being written against store_limit.  store_limit is set to the number of
pages that we're allowed to store by fscache_set_store_limit() - which
means it's one more than the index of the last page we're allowed to store.
The problem is that we permit writing to a page with an index _equal_ to
the store limit - when we should reject that case.

Whilst we're at it, change the triggered assertion in CacheFiles to just
return -ENOBUFS instead.

The assertion failure looks something like this:

CacheFiles: Assertion failed
1000 < 7b1 is false
------------[ cut here ]------------
kernel BUG at fs/cachefiles/rdwr.c:962!
...
RIP: 0010:[<ffffffffa02c9e83>]  [<ffffffffa02c9e83>] cachefiles_write_page+0x273/0x2d0 [cachefiles]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ kamal: backport to 3.13-stable: no __kernel_write(); thanks Ben H. ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b130ed59 upstream.

Only override netfs->primary_index when registering success.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 86108c2e upstream.

If netfs exist, fscache should not increase the reference of parent's
usage and n_children, otherwise, never be decreased.

v2: thanks David's suggest,
 move increasing reference of parent if success
 use kmem_cache_free() freeing primary_index directly

v3: don't move "netfs->primary_index->parent = &fscache_fsdef_index;"
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 28fb4cb7 upstream.

Due to a missing initialization there was no way to map fbdev memory.
Thus for example using the Xserver with the fbdev driver failed.
This fix adds initialization for fix.smem_start and fix.smem_len
in the fb_info structure, which fixes this problem.
Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Egbert Eich <eich@suse.de>
[pulled from SuSE tree by me - airlied]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit cbdb967a upstream.

This is needed to avoid the possibility that the guest triggers
an infinite stream of #DB exceptions (CVE-2015-8104).

VMX is not affected: because it does not save DR6 in the VMCS,
it already intercepts #DB unconditionally.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 54a20552 upstream.

It was found that a guest can DoS a host by triggering an infinite
stream of "alignment check" (#AC) exceptions.  This causes the
microcode to enter an infinite loop where the core never receives
another interrupt.  The host kernel panics pretty quickly due to the
effects (CVE-2015-5307).
Signed-off-by: Eric Northup <digitaleric@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit c9cdd085 upstream.

Defining XE, XM and VE vector numbers.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ kamal: 3.13-stable prereq ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 8cf308e1 upstream.

Don't set the SRB_FLAGS_QUEUE_ACTION_ENABLE flag since we are not specifying
tags.  Without this, the qlogic driver doesn't work properly with storvsc.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit f1cd1f0b upstream.

When listing a inode's xattrs we have a time window where we race against
a concurrent operation for adding a new hard link for our inode that makes
us not return any xattr to user space. In order for this to happen, the
first xattr of our inode needs to be at slot 0 of a leaf and the previous
leaf must still have room for an inode ref (or extref) item, and this can
happen because an inode's listxattrs callback does not lock the inode's
i_mutex (nor does the VFS does it for us), but adding a hard link to an
inode makes the VFS lock the inode's i_mutex before calling the inode's
link callback.

If we have the following leafs:

               Leaf X (has N items)                    Leaf Y

 [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 XATTR_ITEM 12345), ... ]
           slot N - 2         slot N - 1              slot 0

The race illustrated by the following sequence diagram is possible:

       CPU 1                                               CPU 2

  btrfs_listxattr()

    searches for key (257 XATTR_ITEM 0)

    gets path with path->nodes[0] == leaf X
    and path->slots[0] == N

    because path->slots[0] is >=
    btrfs_header_nritems(leaf X), it calls
    btrfs_next_leaf()

    btrfs_next_leaf()
      releases the path

                                                   adds key (257 INODE_REF 666)
                                                   to the end of leaf X (slot N),
                                                   and leaf X now has N + 1 items

      searches for the key (257 INODE_REF 256),
      with path->keep_locks == 1, because that
      is the last key it saw in leaf X before
      releasing the path

      ends up at leaf X again and it verifies
      that the key (257 INODE_REF 256) is no
      longer the last key in leaf X, so it
      returns with path->nodes[0] == leaf X
      and path->slots[0] == N, pointing to
      the new item with key (257 INODE_REF 666)

    btrfs_listxattr's loop iteration sees that
    the type of the key pointed by the path is
    different from the type BTRFS_XATTR_ITEM_KEY
    and so it breaks the loop and stops looking
    for more xattr items
      --> the application doesn't get any xattr
          listed for our inode

So fix this by breaking the loop only if the key's type is greater than
BTRFS_XATTR_ITEM_KEY and skip the current key if its type is smaller.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[ luis: backported to 3.16:
  - drop btrfs_key_type(), which was dropped upstream by
    962a298f ("btrfs: kill the key type accessor helpers") ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 863e02d0 upstream.

Writing a number to /sys/bus/scsi/devices/<sdev>/queue_ramp_up_period
returns the value of that number instead of the number of bytes written.
This behavior can confuse programs expecting POSIX write() semantics.
Fix this by returning the number of bytes written instead.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b71b437e upstream.

Arnaldo reported that tracepoint filters seem to misbehave (ie. not
apply) on inherited events.

The fix is obvious; filters are only set on the actual (parent)
event, use the normal pattern of using this parent event for filters.
This is safe because each child event has a reference to it.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151102095051.GN17308@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 1d512cb7 upstream.

If we are using the NO_HOLES feature, we have a tiny time window when
running delalloc for a nodatacow inode where we can race with a concurrent
link or xattr add operation leading to a BUG_ON.

This happens because at run_delalloc_nocow() we end up casting a leaf item
of type BTRFS_INODE_[REF|EXTREF]_KEY or of type BTRFS_XATTR_ITEM_KEY to a
file extent item (struct btrfs_file_extent_item) and then analyse its
extent type field, which won't match any of the expected extent types
(values BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]) and therefore trigger an
explicit BUG_ON(1).

The following sequence diagram shows how the race happens when running a
no-cow dellaloc range [4K, 8K[ for inode 257 and we have the following
neighbour leafs:

             Leaf X (has N items)                    Leaf Y

 [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 EXTENT_DATA 8192), ... ]
              slot N - 2         slot N - 1              slot 0

 (Note the implicit hole for inode 257 regarding the [0, 8K[ range)

       CPU 1                                         CPU 2

 run_dealloc_nocow()
   btrfs_lookup_file_extent()
     --> searches for a key with value
         (257 EXTENT_DATA 4096) in the
         fs/subvol tree
     --> returns us a path with
         path->nodes[0] == leaf X and
         path->slots[0] == N

   because path->slots[0] is >=
   btrfs_header_nritems(leaf X), it
   calls btrfs_next_leaf()

   btrfs_next_leaf()
     --> releases the path

                                              hard link added to our inode,
                                              with key (257 INODE_REF 500)
                                              added to the end of leaf X,
                                              so leaf X now has N + 1 keys

     --> searches for the key
         (257 INODE_REF 256), because
         it was the last key in leaf X
         before it released the path,
         with path->keep_locks set to 1

     --> ends up at leaf X again and
         it verifies that the key
         (257 INODE_REF 256) is no longer
         the last key in the leaf, so it
         returns with path->nodes[0] ==
         leaf X and path->slots[0] == N,
         pointing to the new item with
         key (257 INODE_REF 500)

   the loop iteration of run_dealloc_nocow()
   does not break out the loop and continues
   because the key referenced in the path
   at path->nodes[0] and path->slots[0] is
   for inode 257, its type is < BTRFS_EXTENT_DATA_KEY
   and its offset (500) is less then our delalloc
   range's end (8192)

   the item pointed by the path, an inode reference item,
   is (incorrectly) interpreted as a file extent item and
   we get an invalid extent type, leading to the BUG_ON(1):

   if (extent_type == BTRFS_FILE_EXTENT_REG ||
      extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
       (...)
   } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
       (...)
   } else {
       BUG_ON(1)
   }

The same can happen if a xattr is added concurrently and ends up having
a key with an offset smaller then the delalloc's range end.

So fix this by skipping keys with a type smaller than
BTRFS_EXTENT_DATA_KEY.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit aeafbf84 upstream.

While running a stress test I got the following warning triggered:

  [191627.672810] ------------[ cut here ]------------
  [191627.673949] WARNING: CPU: 8 PID: 8447 at fs/btrfs/file.c:779 __btrfs_drop_extents+0x391/0xa50 [btrfs]()
  (...)
  [191627.701485] Call Trace:
  [191627.702037]  [<ffffffff8145f077>] dump_stack+0x4f/0x7b
  [191627.702992]  [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2
  [191627.704091]  [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
  [191627.705380]  [<ffffffffa0664499>] ? __btrfs_drop_extents+0x391/0xa50 [btrfs]
  [191627.706637]  [<ffffffff8104b46d>] warn_slowpath_null+0x1a/0x1c
  [191627.707789]  [<ffffffffa0664499>] __btrfs_drop_extents+0x391/0xa50 [btrfs]
  [191627.709155]  [<ffffffff8115663c>] ? cache_alloc_debugcheck_after.isra.32+0x171/0x1d0
  [191627.712444]  [<ffffffff81155007>] ? kmemleak_alloc_recursive.constprop.40+0x16/0x18
  [191627.714162]  [<ffffffffa06570c9>] insert_reserved_file_extent.constprop.40+0x83/0x24e [btrfs]
  [191627.715887]  [<ffffffffa065422b>] ? start_transaction+0x3bb/0x610 [btrfs]
  [191627.717287]  [<ffffffffa065b604>] btrfs_finish_ordered_io+0x273/0x4e2 [btrfs]
  [191627.728865]  [<ffffffffa065b888>] finish_ordered_fn+0x15/0x17 [btrfs]
  [191627.730045]  [<ffffffffa067d688>] normal_work_helper+0x14c/0x32c [btrfs]
  [191627.731256]  [<ffffffffa067d96a>] btrfs_endio_write_helper+0x12/0x14 [btrfs]
  [191627.732661]  [<ffffffff81061119>] process_one_work+0x24c/0x4ae
  [191627.733822]  [<ffffffff810615b0>] worker_thread+0x206/0x2c2
  [191627.734857]  [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f
  [191627.736052]  [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f
  [191627.737349]  [<ffffffff810669a6>] kthread+0xef/0xf7
  [191627.738267]  [<ffffffff810f3b3a>] ? time_hardirqs_on+0x15/0x28
  [191627.739330]  [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad
  [191627.741976]  [<ffffffff81465592>] ret_from_fork+0x42/0x70
  [191627.743080]  [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad
  [191627.744206] ---[ end trace bbfddacb7aaada8d ]---

  $ cat -n fs/btrfs/file.c
  691  int __btrfs_drop_extents(struct btrfs_trans_handle *trans,
  (...)
  758                  btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
  759                  if (key.objectid > ino ||
  760                      key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= end)
  761                          break;
  762
  763                  fi = btrfs_item_ptr(leaf, path->slots[0],
  764                                      struct btrfs_file_extent_item);
  765                  extent_type = btrfs_file_extent_type(leaf, fi);
  766
  767                  if (extent_type == BTRFS_FILE_EXTENT_REG ||
  768                      extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
  (...)
  774                  } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
  (...)
  778                  } else {
  779                          WARN_ON(1);
  780                          extent_end = search_start;
  781                  }
  (...)

This happened because the item we were processing did not match a file
extent item (its key type != BTRFS_EXTENT_DATA_KEY), and even on this
case we cast the item to a struct btrfs_file_extent_item pointer and
then find a type field value that does not match any of the expected
values (BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]). This scenario happens
due to a tiny time window where a race can happen as exemplified below.
For example, consider the following scenario where we're using the
NO_HOLES feature and we have the following two neighbour leafs:

               Leaf X (has N items)                    Leaf Y

[ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 EXTENT_DATA 8192), ... ]
          slot N - 2         slot N - 1              slot 0

Our inode 257 has an implicit hole in the range [0, 8K[ (implicit rather
than explicit because NO_HOLES is enabled). Now if our inode has an
ordered extent for the range [4K, 8K[ that is finishing, the following
can happen:

          CPU 1                                       CPU 2

  btrfs_finish_ordered_io()
    insert_reserved_file_extent()
      __btrfs_drop_extents()
         Searches for the key
          (257 EXTENT_DATA 4096) through
          btrfs_lookup_file_extent()

         Key not found and we get a path where
         path->nodes[0] == leaf X and
         path->slots[0] == N

         Because path->slots[0] is >=
         btrfs_header_nritems(leaf X), we call
         btrfs_next_leaf()

         btrfs_next_leaf() releases the path

                                                  inserts key
                                                  (257 INODE_REF 4096)
                                                  at the end of leaf X,
                                                  leaf X now has N + 1 keys,
                                                  and the new key is at
                                                  slot N

         btrfs_next_leaf() searches for
         key (257 INODE_REF 256), with
         path->keep_locks set to 1,
         because it was the last key it
         saw in leaf X

           finds it in leaf X again and
           notices it's no longer the last
           key of the leaf, so it returns 0
           with path->nodes[0] == leaf X and
           path->slots[0] == N (which is now
           < btrfs_header_nritems(leaf X)),
           pointing to the new key
           (257 INODE_REF 4096)

         __btrfs_drop_extents() casts the
         item at path->nodes[0], slot
         path->slots[0], to a struct
         btrfs_file_extent_item - it does
         not skip keys for the target
         inode with a type less than
         BTRFS_EXTENT_DATA_KEY
         (BTRFS_INODE_REF_KEY < BTRFS_EXTENT_DATA_KEY)

         sees a bogus value for the type
         field triggering the WARN_ON in
         the trace shown above, and sets
         extent_end = search_start (4096)

         does the if-then-else logic to
         fixup 0 length extent items created
         by a past bug from hole punching:

           if (extent_end == key.offset &&
               extent_end >= search_start)
               goto delete_extent_item;

         that evaluates to true and it ends
         up deleting the key pointed to by
         path->slots[0], (257 INODE_REF 4096),
         from leaf X

The same could happen for example for a xattr that ends up having a key
with an offset value that matches search_start (very unlikely but not
impossible).

So fix this by ensuring that keys smaller than BTRFS_EXTENT_DATA_KEY are
skipped, never casted to struct btrfs_file_extent_item and never deleted
by accident. Also protect against the unexpected case of getting a key
for a lower inode number by skipping that key and issuing a warning.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 04633df0 upstream.

When we get loaded by a 64-bit bootloader, kernel entry point is
startup_64 in head_64.S. We don't trust any and all bootloaders because
some will fiddle with CPU configuration so we go ahead and massage each
CPU into sanity again.

For example, some dell BIOSes have this XD disable feature which set
IA32_MISC_ENABLE[34] and disable NX. This might be some dumb workaround
for other OSes but Linux sure doesn't need it.

A similar thing is present in the Surface 3 firmware - see
https://bugzilla.kernel.org/show_bug.cgi?id=106051 - which sets this bit
only on the BSP:

  # rdmsr -a 0x1a0
  400850089
  850089
  850089
  850089

I know, right?!

There's not even an off switch in there.

So fix all those cases by sanitizing the 64-bit entry point too. For
that, make verify_cpu() callable in 64-bit mode also.
Requested-and-debugged-by: "H. Peter Anvin" <hpa@zytor.com>
Reported-and-tested-by: Bastien Nocera <bugzilla@hadess.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1446739076-21303-1-git-send-email-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 3824657c upstream.

The following statement of ABI/testing/dev-kmsg is not quite right:

   It is not possible to inject messages from userspace with the
   facility number LOG_KERN (0), to make sure that the origin of the
   messages can always be reliably determined.

Userland actually can inject messages with a facility of 0 by abusing the
fact that the facility is stored in a u8 data type.  By using a facility
which is a multiple of 256 the assignment of msg->facility in log_store()
implicitly truncates it to 0, i.e.  LOG_KERN, allowing users of /dev/kmsg
to spoof kernel messages as shown below:

The following call...
   # printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg
...leads to the following log entry (dmesg -x | tail -n 1):
   user  :emerg : [   66.137758] Kernel panic - not syncing: beer empty

However, this call...
   # printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg
...leads to the slightly different log entry (note the kernel facility):
   kern  :emerg : [   74.177343] Kernel panic - not syncing: beer empty

Fix that by limiting the user provided facility to 8 bit right from the
beginning and catch the truncation early.

Fixes: 7ff9554b ("printk: convert byte-buffer to variable-length...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Alex Elder <elder@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ kamal: backport to 3.13-stable: retain local 'int i' ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 54708d28 upstream.

The commit 96d0df79 ("proc: make proc_fd_permission() thread-friendly")
fixed the access to /proc/self/fd from sub-threads, but introduced another
problem: a sub-thread can't access /proc/<tid>/fd/ or /proc/thread-self/fd
if generic_permission() fails.

Change proc_fd_permission() to check same_thread_group(pid_task(), current).

Fixes: 96d0df79 ("proc: make proc_fd_permission() thread-friendly")
Reported-by: "Jin, Yihua" <yihua.jin@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 100ceb66 upstream.

Reported by Clifford and Craig for JMicron OHCI-1394 + SDHCI combo
controllers:  Often or even most of the time, the controller is
initialized with the message "added OHCI v1.10 device as card 0, 4 IR +
0 IT contexts, quirks 0x10".  With 0 isochronous transmit DMA contexts
(IT contexts), applications like audio output are impossible.

However, OHCI-1394 demands that at least 4 IT contexts are implemented
by the link layer controller, and indeed JMicron JMB38x do implement
four of them.  Only their IsoXmitIntMask register is unreliable at early
access.

With my own JMB381 single function controller I found:
  - I can reproduce the problem with a lower probability than Craig's.
  - If I put a loop around the section which clears and reads
    IsoXmitIntMask, then either the first or the second attempt will
    return the correct initial mask of 0x0000000f.  I never encountered
    a case of needing more than a second attempt.
  - Consequently, if I put a dummy reg_read(...IsoXmitIntMaskSet)
    before the first write, the subsequent read will return the correct
    result.
  - If I merely ignore a wrong read result and force the known real
    result, later isochronous transmit DMA usage works just fine.

So let's just fix this chip bug up by the latter method.  Tested with
JMB381 on kernel 3.13 and 4.3.

Since OHCI-1394 generally requires 4 IT contexts at a minium, this
workaround is simply applied whenever the initial read of IsoXmitIntMask
returns 0, regardless whether it's a JMicron chip or not.  I never heard
of this issue together with any other chip though.

I am not 100% sure that this fix works on the OHCI-1394 part of JMB380
and JMB388 combo controllers exactly the same as on the JMB381 single-
function controller, but so far I haven't had a chance to let an owner
of a combo chip run a patched kernel.

Strangely enough, IsoRecvIntMask is always reported correctly, even
though it is probed right before IsoXmitIntMask.

Reported-by: Clifford Dunn
Reported-by: Craig Moore <craig.moore@qenos.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 5cf92c8b upstream.

Adding Intel codename Lewisburg platform device IDs for audio.

[rearranged the position by tiwai]
Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit c932b98c upstream.

HP ProBook 6550b needs the same pin fixup applied to other HP B-series
laptops with docks for making its headphone and dock headphone jacks
working properly.  We just need to add the codec SSID to the list.

Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=191971Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 656ec4a4 upstream.

The comment in code had it mostly right, but we enable paging for
emulated real mode regardless of EPT.

Without EPT (which implies emulated real mode), secondary VCPUs won't
start unless we disable SM[AE]P when the guest doesn't use paging.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit e1e746b3 upstream.

SMAP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMAP needs to be
manually disabled when guest switches to non-paging mode.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
[ kamal: 3.13-stable prereq for
  656ec4a4 KVM: VMX: fix SMEP and SMAP without EPT ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit c84da8b9 upstream.

In nop_mcount, shdr->sh_offset and welp->r_offset should handle
endianness properly, otherwise it will trigger Segmentation fault
if the recordmcount main and file.o have different endianness.

Link: http://lkml.kernel.org/r/563806C7.7070606@huawei.comSigned-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 254d3dfe upstream.

In TDLS channel-switch operations the chandef can sometimes be NULL.
Avoid an oops in the trace code for these cases and just print a
chandef full of zeros.

Fixes: a7a6bdd0 ("mac80211: introduce TDLS channel switch ops")
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 323c4a02 upstream.

This is an issue on SMAP enabled CPUs and 32 bit apps running on 64 bit
OS. Do not access user memory from kernel code. The SMAP bit restricts
accessing user memory from kernel code.
Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 5029615e upstream.

Build-time fixes:
- make lbeg/lend/lcount save/restore conditional on kernel entry;
- don't clear lcount in platform_restart functions unconditionally.

Run-time fixes:
- use correct end of range register in __endla paired with __loopt, not
  the unused temporary register. This fixes .bss zero-initialization.
  Update comments in asmmacro.h;
- don't clobber a10 in the usercopy that leads to access to unmapped
  memory.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 4afa5f96 upstream.

The hash_accept call fails to work on sockets that have not received
any data.  For some algorithm implementations it may cause crashes.

This patch fixes this by ensuring that we only export and import on
sockets that have received data.
Reported-by: Harsh Jain <harshjain.prof@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 47796938 upstream.

This reverts commit a1989b33.

That commit introduced a regression at least for the case of the SG_IO ioctl()
running without CAP_SYS_RAWIO capability (e.g., unprivileged users) when there
are no active paths: the ioctl() fails with the ENOTTY errno immediately rather
than blocking due to queue_if_no_path until a path becomes active, for example.

That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices
(qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2])
from multipath devices; which leads to SCSI/filesystem errors in such a guest.

More general scenarios can hit that regression too. The following demonstration
employs a SG_IO ioctl() with a standard SCSI INQUIRY command for this objective
(some output & user changes omitted for brevity and comments added for clarity).

Reverting that commit restores normal operation (queueing) in failing scenarios;
tested on linux-next (next-20151022).

1) Test-case is based on sg_simple0 [3] (just SG_IO; remove SG_GET_VERSION_NUM)

    $ cat sg_simple0.c
    ... see [3] ...
    $ sed '/SG_GET_VERSION_NUM/,/}/d' sg_simple0.c > sgio_inquiry.c
    $ gcc sgio_inquiry.c -o sgio_inquiry

2) The ioctl() works fine with active paths present.

    # multipath -l 85ag56
    85ag56 (...) dm-19 IBM     ,2145
    size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw
    |-+- policy='service-time 0' prio=0 status=active
    | |- 8:0:11:0  sdz  65:144  active undef running
    | `- 9:0:9:0   sdbf 67:144  active undef running
    `-+- policy='service-time 0' prio=0 status=enabled
      |- 8:0:12:0  sdae 65:224  active undef running
      `- 9:0:12:0  sdbo 68:32   active undef running

    $ ./sgio_inquiry /dev/mapper/85ag56
    Some of the INQUIRY command's response:
        IBM       2145              0000
    INQUIRY duration=0 millisecs, resid=0

3) The ioctl() fails with ENOTTY errno with _no_ active paths present,
   for unprivileged users (rather than blocking due to queue_if_no_path).

    # for path in $(multipath -l 85ag56 | grep -o 'sd[a-z]\+'); \
          do multipathd -k"fail path $path"; done

    # multipath -l 85ag56
    85ag56 (...) dm-19 IBM     ,2145
    size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw
    |-+- policy='service-time 0' prio=0 status=enabled
    | |- 8:0:11:0  sdz  65:144  failed undef running
    | `- 9:0:9:0   sdbf 67:144  failed undef running
    `-+- policy='service-time 0' prio=0 status=enabled
      |- 8:0:12:0  sdae 65:224  failed undef running
      `- 9:0:12:0  sdbo 68:32   failed undef running

    $ ./sgio_inquiry /dev/mapper/85ag56
    sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device

4) dmesg shows that scsi_verify_blk_ioctl() failed for SG_IO (0x2285);
   it returns -ENOIOCTLCMD, later replaced with -ENOTTY in vfs_ioctl().

    $ dmesg
    <...>
    [] device-mapper: multipath: Failing path 65:144.
    [] device-mapper: multipath: Failing path 67:144.
    [] device-mapper: multipath: Failing path 65:224.
    [] device-mapper: multipath: Failing path 68:32.
    [] sgio_inquiry: sending ioctl 2285 to a partition!

5) The ioctl() only works if the SYS_CAP_RAWIO capability is present
   (then queueing happens -- in this example, queue_if_no_path is set);
   this is due to a conditional check in scsi_verify_blk_ioctl().

    # capsh --drop=cap_sys_rawio -- -c './sgio_inquiry /dev/mapper/85ag56'
    sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device

    # ./sgio_inquiry /dev/mapper/85ag56 &
    [1] 72830

    # cat /proc/72830/stack
    [<c00000171c0df700>] 0xc00000171c0df700
    [<c000000000015934>] __switch_to+0x204/0x350
    [<c000000000152d4c>] msleep+0x5c/0x80
    [<c00000000077dfb0>] dm_blk_ioctl+0x70/0x170
    [<c000000000487c40>] blkdev_ioctl+0x2b0/0x9b0
    [<c0000000003128e4>] block_ioctl+0x64/0xd0
    [<c0000000002dd3b0>] do_vfs_ioctl+0x490/0x780
    [<c0000000002dd774>] SyS_ioctl+0xd4/0xf0
    [<c000000000009358>] system_call+0x38/0xd0

6) This is the function call chain exercised in this analysis:

SYSCALL_DEFINE3(ioctl, <...>) @ fs/ioctl.c
    -> do_vfs_ioctl()
        -> vfs_ioctl()
            ...
            error = filp->f_op->unlocked_ioctl(filp, cmd, arg);
            ...
                -> dm_blk_ioctl() @ drivers/md/dm.c
                    -> multipath_ioctl() @ drivers/md/dm-mpath.c
                        ...
                        (bdev = NULL, due to no active paths)
                        ...
                        if (!bdev || <...>) {
                            int err = scsi_verify_blk_ioctl(NULL, cmd);
                            if (err)
                                r = err;
                        }
                        ...
                            -> scsi_verify_blk_ioctl() @ block/scsi_ioctl.c
                                ...
                                if (bd && bd == bd->bd_contains) // not taken (bd = NULL)
                                    return 0;
                                ...
                                if (capable(CAP_SYS_RAWIO)) // not taken (unprivileged user)
                                    return 0;
                                ...
                                printk_ratelimited(KERN_WARNING
                                           "%s: sending ioctl %x to a partition!\n" <...>);

                                return -ENOIOCTLCMD;
                            <-
                        ...
                        return r ? : <...>
                    <-
            ...
            if (error == -ENOIOCTLCMD)
                error = -ENOTTY;
             out:
                return error;
            ...

Links:
[1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52
[2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device')
[3] http://tldp.org/HOWTO/SCSI-Generic-HOWTO/pexample.html (Revision 1.2, 2002-05-03)
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit f3c63795 upstream.

Commit 073db4a5 ("mtd: fix: avoid race condition when accessing
mtd->usecount") fixed a race condition but due to poor ordering of the
mutex acquisition, introduced a potential deadlock.

The deadlock can occur, for example, when rmmod'ing the m25p80 module, which
will delete one or more MTDs, along with any corresponding mtdblock
devices. This could potentially race with an acquisition of the block
device as follows.

 -> blktrans_open()
    ->  mutex_lock(&dev->lock);
    ->  mutex_lock(&mtd_table_mutex);

 -> del_mtd_device()
    ->  mutex_lock(&mtd_table_mutex);
    ->  blktrans_notify_remove() -> del_mtd_blktrans_dev()
       ->  mutex_lock(&dev->lock);

This is a classic (potential) ABBA deadlock, which can be fixed by
making the A->B ordering consistent everywhere. There was no real
purpose to the ordering in the original patch, AFAIR, so this shouldn't
be a problem. This ordering was actually already present in
del_mtd_blktrans_dev(), for one, where the function tried to ensure that
its caller already held mtd_table_mutex before it acquired &dev->lock:

        if (mutex_trylock(&mtd_table_mutex)) {
                mutex_unlock(&mtd_table_mutex);
                BUG();
        }

So, reverse the ordering of acquisition of &dev->lock and &mtd_table_mutex so
we always acquire mtd_table_mutex first.

Snippets of the lockdep output follow:

  # modprobe -r m25p80
  [   53.419251]
  [   53.420838] ======================================================
  [   53.427300] [ INFO: possible circular locking dependency detected ]
  [   53.433865] 4.3.0-rc6 #96 Not tainted
  [   53.437686] -------------------------------------------------------
  [   53.444220] modprobe/372 is trying to acquire lock:
  [   53.449320]  (&new->lock){+.+...}, at: [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc
  [   53.457271]
  [   53.457271] but task is already holding lock:
  [   53.463372]  (mtd_table_mutex){+.+.+.}, at: [<c0439994>] del_mtd_device+0x18/0x100
  [   53.471321]
  [   53.471321] which lock already depends on the new lock.
  [   53.471321]
  [   53.479856]
  [   53.479856] the existing dependency chain (in reverse order) is:
  [   53.487660]
  -> #1 (mtd_table_mutex){+.+.+.}:
  [   53.492331]        [<c043fc5c>] blktrans_open+0x34/0x1a4
  [   53.497879]        [<c01afce0>] __blkdev_get+0xc4/0x3b0
  [   53.503364]        [<c01b0bb8>] blkdev_get+0x108/0x320
  [   53.508743]        [<c01713c0>] do_dentry_open+0x218/0x314
  [   53.514496]        [<c0180454>] path_openat+0x4c0/0xf9c
  [   53.519959]        [<c0182044>] do_filp_open+0x5c/0xc0
  [   53.525336]        [<c0172758>] do_sys_open+0xfc/0x1cc
  [   53.530716]        [<c000f740>] ret_fast_syscall+0x0/0x1c
  [   53.536375]
  -> #0 (&new->lock){+.+...}:
  [   53.540587]        [<c063f124>] mutex_lock_nested+0x38/0x3cc
  [   53.546504]        [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc
  [   53.552606]        [<c043f164>] blktrans_notify_remove+0x7c/0x84
  [   53.558891]        [<c04399f0>] del_mtd_device+0x74/0x100
  [   53.564544]        [<c043c670>] del_mtd_partitions+0x80/0xc8
  [   53.570451]        [<c0439aa0>] mtd_device_unregister+0x24/0x48
  [   53.576637]        [<c046ce6c>] spi_drv_remove+0x1c/0x34
  [   53.582207]        [<c03de0f0>] __device_release_driver+0x88/0x114
  [   53.588663]        [<c03de19c>] device_release_driver+0x20/0x2c
  [   53.594843]        [<c03dd9e8>] bus_remove_device+0xd8/0x108
  [   53.600748]        [<c03dacc0>] device_del+0x10c/0x210
  [   53.606127]        [<c03dadd0>] device_unregister+0xc/0x20
  [   53.611849]        [<c046d878>] __unregister+0x10/0x20
  [   53.617211]        [<c03da868>] device_for_each_child+0x50/0x7c
  [   53.623387]        [<c046eae8>] spi_unregister_master+0x58/0x8c
  [   53.629578]        [<c03e12f0>] release_nodes+0x15c/0x1c8
  [   53.635223]        [<c03de0f8>] __device_release_driver+0x90/0x114
  [   53.641689]        [<c03de900>] driver_detach+0xb4/0xb8
  [   53.647147]        [<c03ddc78>] bus_remove_driver+0x4c/0xa0
  [   53.652970]        [<c00cab50>] SyS_delete_module+0x11c/0x1e4
  [   53.658976]        [<c000f740>] ret_fast_syscall+0x0/0x1c
  [   53.664621]
  [   53.664621] other info that might help us debug this:
  [   53.664621]
  [   53.672979]  Possible unsafe locking scenario:
  [   53.672979]
  [   53.679169]        CPU0                    CPU1
  [   53.683900]        ----                    ----
  [   53.688633]   lock(mtd_table_mutex);
  [   53.692383]                                lock(&new->lock);
  [   53.698306]                                lock(mtd_table_mutex);
  [   53.704658]   lock(&new->lock);
  [   53.707946]
  [   53.707946]  *** DEADLOCK ***

Fixes: 073db4a5 ("mtd: fix: avoid race condition when accessing mtd->usecount")
Reported-by: Felipe Balbi <balbi@ti.com>
Tested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 562b103a upstream.

The sizeof() is invoked on an incorrect variable, likely due to some
copy-paste error, and this might result in memory corruption. Fix this.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 5accd17d upstream.

For reasons not entirely apparent, but now enshrined in history, the
architectural mapping of AArch32 banked registers to AArch64 registers
actually orders SP_<mode> and LR_<mode> backwards compared to the
intuitive r13/r14 order, for all modes except FIQ.

Fix the compat_<reg>_<mode> macros accordingly, in the hope of avoiding
subtle bugs with KVM and AArch32 guests.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 357ae967 upstream.

Do not use PAGE_SIZE marco to calculate max_sectors per I/O
request. Driver code assumes PAGE_SIZE will be always 4096 which can
lead to wrongly calculated value if PAGE_SIZE is not 4096. This issue
was reported in Ubuntu Bugzilla Bug #1475166.
Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 9acdc911 upstream.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>