- 12 Jun, 2017 21 commits
-
-
Rodrigo Vivi authored
There is no platform specific change needed for LSPCON support on Cannonlake. So let's make it gen9+. Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-17-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Also in a way that reuse bdw+ for all next platforms. Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-16-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
As Geminilake scalers Cannonlake also don't need and don't have the "high quality" mode programming. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-15-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Since we have HAS_CSR tied to the platform definition let's use this instead of checking per platform. One less thing to worry when adding support to new platforms. Signed-off-by:
-
Anusha Srivatsa authored
This patch loads the DMC on CNL.The firmware version is 1.04. v2: (Rodrigo) Remove MODULE_FIRMWARE. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-13-git-send-email-rodrigo.vivi@intel.com
-
Clint Taylor authored
vswing programming sequence step 2 requires the Loadgen_select bit to be set in PORT_TX_DW4 lane reigsters per table defined by Bit rate and lane width. Implemented the change that was marked as FIXME in the driver. v2: (Rodrigo) checkpatch fixes. Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-12-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. This new sequence for Cannonlake is more like Broxton style but still with different registers, different table and different steps. v2: Do not write to DW4_GRP to avoid overwrite individual loadgen. Fix PORT_CL_DW5 SUS Clock Config set. v3: As previous platforms use only eDP table if low voltage was requested. v4: fix Werror:maybe uninitialized (Paulo) v5: Rebase on top of dw2_swing_sel changes on previous patches. v6: Using flexible SCALING_MODE_SEL(x). Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Rodrigo Vivi authored
These tables are used on voltage wswing sequence initialization on Cannonlake. It is a complete new format now in use by the voltage swing team, not following any other standard in use by any other platform. Also the registers are different as well. So let's redefine the translation table for Cannonlake. The table is huge. So we minimized with the fields that are different or might be different anytime soon. The common values will be hardcoded on the voltage swing sequence. v2: Merge the lower and the upper bits to match the spec table and make review easier. This was possible with the good idea for Manasi with a better way to handle it on the bit macro definition presented on previous patch. Credits-to: Manasi Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: -
Rodrigo Vivi authored
This are the registers and bits needed for the voltage swing sequence on Cannonlake. v2: Remove CL_DW5 that was wrongly defined. v3: Use (1 << 1) instead of (1<<1) as Paulo suggested Change DW2 swing sel upper and lower macros to do the bit selection instead of definint a table that doesn't match the spec. It is based on a Manasi version of it. Credits-to: Manasi. v4: Let SCALING_MODE_SEL flexible. (Manasi) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: -
Rodrigo Vivi authored
Also new registers can have different mmio offsets per different lane per port. v2: Use _PICK as PORT3 instead of creating a new macro with if per port. v3: Use _PICK directly on MMIO_PORT6. While MMIO_PORT isn't flexible enough let's continue with MMIO_PORT6 as we have MMIO_PORT3. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: -
Rodrigo Vivi authored
Although CNL follows PLL initialization more like Skylake than Broxton we have a completely different initialization sequence and registers used. One big difference from SKL is that CDCLK PLL is now exclusive (ADPLL) and for DDIs and MIPI we need to use DFGPLLs 0, 1 or 2. v2: Accept all Ander's suggestions and fixes: - Registers and bits names prefix - Group pll functions - bits masks fixes - remove read and modify on cfgcr1 - fix cfgcr0 setup v3: Set SSC_ENABLE for DP. Fix HDMI_MODE cfgcr0. Avoid touch cfgcr0 on DP. Add missed else on dpll_mgr definition so we use cnl one, not hsw. v3: Centra freq should be always set to default and change bits definitions to (1 << 1) instead of (1<<1). (by Paulo) v4: Rebased. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Reviewed-by:Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Kahola, Mika authored
DPLL's are defined in DPCLKA_CFGCR0 register (0x6C200). Let's use these definitions when computing dpll's for ddi ports. v2: (Rodrigo) Remove register that was defined in another patch with fixed name and more bits. Signed-off-by:Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-6-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
One of the steps for PLL (un)initialization is to (un)map the correspondent DDI that is actually using that PLL. So, let's do this step following the places already stablished and used so far, although spec put this as part of PLL initialization sequences. v2: Use proper prefix on bits names as suggested by Ander. v3: Add missed "~". Without that the logic was inverted so we were disabling interrupts. Credits-to: Clinton Credits-to: Art v4: Spec is getting updated to do DDI -> PLL mapping and clock on in 2 separated reg writes. (Paulo) Also update bits definitions to use space (1 << 1) instead of (1<<1). (Paulo) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: -
Rodrigo Vivi authored
All the low level cdclk bits are present, so let's add the required hooks to reconfigure cdclk on the fly. Cannonlake also needs to adjust the minimal pixel rate as gen9 platforms. Specially for the Azalia audio case. v2: Rebase due to cnl_sanitize_cdclk() v3: Rebased by Rodrigo on top of Ville's cdclk rework. v4: Rebase moving cnl_calc_cdclk up to follow same order as previous platforms. v2: Squash drm/i915/cnl: Adjust min pixel rate. to address the current limitation where CDCLK cannot be set to 168MHz if audio is used with 96MHz. (Imre) v3: adjust some of the clock limits within bdw_adjust_min_pipe_pixel_rate. (Ville/DK/Imre). Fix commit message messed by squash. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by:Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-4-git-send-email-rodrigo.vivi@intel.com
-
Ville Syrjälä authored
Implement the CNL display init/uninit sequence as outlined in Bspec. Quite similar to SKL/BXT. The main complicaiton is probably the extra procmon setup we must do based on the process/voltage information we can read out from some register. v2: s/skl_dbuf/gen9_dbuf/ to follow upstream bxt needed a cdclk sanitize step, so let's add it for cnl too v3: s/CHICKEN_MISC_1/CHICKEN_MISC_2/ (Ander) v4: Rebased by Rodrigo after Ville's cdclk rework v5: Removed unecessary Aux IO forced enable/disable, Fix DW10 setup Fix procpon Mask. (Credits-to Paulo and Clint) Remove A0 workaround. v6: Rebased on top of recent code (Rodrigo). v7: Respect the order of sanitize_ after set_ (Done by Rodrigo, Requested by Ville) v8: Commit message updated to matvh v5 changes besides Remove unused DW8 and an extra blank line. (all noticed by Imre). v9: Remove __attribute__((unused)) added on latest version of drm/i915/cnl: Implement .set_cdclk() for CNL. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: -
Ville Syrjälä authored
Add support for changing the cdclk frequency on CNL. Again, quite similar to BXT, but there are some annoying differences which means trying to share more code might not be feasible: * PLL ratio now lives in the PLL enable register * pcode came from SKL, not from BXT We support three cdclk frequencies: 168,336,528 Mhz. The first two use the same PLL frequency, the last one uses a different one meaning we once again may need to toggle the PLL off and on when changing cdclk. v2: Rebased by Rodrigo on top of Ville's cdclk rework. v3: Respect order of set_ bellow get_ (Ville) v4: Added __attribute__((unused)) to avoid broken compilation with Werror. Signed-off-by:
-
Ville Syrjälä authored
Add support for reading out the cdclk frequency from the hardware on CNL. Very similar to BXT, with a few new twists and turns: * the PLL is now called CDCLK PLL, not DE PLL * reference clock can be 24 MHz in addition to the 19.2 MHz BXT had * the ratio now lives in the PLL enable register * Only 1x and 2x CD2X dividers are supported v2: Deal with PLL lock bit the same way as BXT/SKL do now v3: DSSM refclk indicator is bit 31 not 24 (Ander) v4: Rebased by Rodrigo after Ville's cdclk rework. v5: Set cdclk to the ref clock as previous platforms. (Imre) Signed-off-by:
-
Maarten Lankhorst authored
Pass crtc_state to the enable callback, and connector_state to all callbacks. This will eliminate the need to guess for the correct pipe in these callbacks. The crtc state is required for pch_enable_backlight to obtain the correct cpu_transcoder. intel_dp_aux_backlight's setup function is called before hw readout, so crtc_state and connector_state->best_encoder are NULL in the enable() and set() callbacks. This fixes the following series of warns from intel_get_pipe_from_connector: [ 219.968428] ------------[ cut here ]------------ [ 219.968481] WARNING: CPU: 3 PID: 2457 at drivers/gpu/drm/i915/intel_display.c:13881 intel_get_pipe_from_connector+0x62/0x90 [i915] [ 219.968483] WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)) [ 219.968485] Modules linked in: nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm intel_rapl x86_pkg_temp_thermal coretemp kvm_intel snd_seq_midi snd_seq_midi_event kvm snd_rawmidi irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_seq snd_seq_device serio_raw snd_timer aesni_intel aes_x86_64 crypto_simd glue_helper cryptd lpc_ich snd mei_me shpchp soundcore mei rfkill_gpio mac_hid intel_pmc_ipc parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid igb ahci i915 xhci_pci dca xhci_hcd ptp sdhci_pci sdhci libahci pps_core i2c_hid hid video [ 219.968573] CPU: 3 PID: 2457 Comm: kworker/u8:3 Tainted: G W 4.10.0-tip-201703010159+ #2 [ 219.968575] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0144.B10.1606270006 06/27/2016 [ 219.968627] Workqueue: events_unbound intel_atomic_commit_work [i915] [ 219.968629] Call Trace: [ 219.968640] dump_stack+0x63/0x87 [ 219.968646] __warn+0xd1/0xf0 [ 219.968651] warn_slowpath_fmt+0x4f/0x60 [ 219.968657] ? drm_printk+0x97/0xa0 [ 219.968708] intel_get_pipe_from_connector+0x62/0x90 [i915] [ 219.968756] intel_panel_enable_backlight+0x19/0xf0 [i915] [ 219.968804] intel_edp_backlight_on.part.22+0x33/0x40 [i915] [ 219.968852] intel_edp_backlight_on+0x18/0x20 [i915] [ 219.968900] intel_enable_ddi+0x94/0xc0 [i915] [ 219.968950] intel_encoders_enable.isra.93+0x77/0x90 [i915] [ 219.969000] haswell_crtc_enable+0x310/0x7f0 [i915] [ 219.969051] intel_update_crtc+0x58/0x100 [i915] [ 219.969101] skl_update_crtcs+0x218/0x240 [i915] [ 219.969153] intel_atomic_commit_tail+0x350/0x1000 [i915] [ 219.969159] ? vtime_account_idle+0xe/0x50 [ 219.969164] ? finish_task_switch+0x107/0x250 [ 219.969214] intel_atomic_commit_work+0x12/0x20 [i915] [ 219.969219] process_one_work+0x153/0x3f0 [ 219.969223] worker_thread+0x12b/0x4b0 [ 219.969227] kthread+0x101/0x140 [ 219.969230] ? rescuer_thread+0x340/0x340 [ 219.969233] ? kthread_park+0x90/0x90 [ 219.969237] ? do_syscall_64+0x6e/0x180 [ 219.969243] ret_from_fork+0x2c/0x40 [ 219.969246] ---[ end trace 0a8fa19387b9ad6d ]--- Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100022Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170612102115.23665-4-maarten.lankhorst@linux.intel.comReviewed-by:
-
Maarten Lankhorst authored
Passing the state is also needed to convert the backlight functions to use the correct state instead of looking it up. This is done as a separate commit to allow easier bisecting. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100022Signed-off-by:
-
Maarten Lankhorst authored
The backlight functions need to determine the pipe and the transcoder the backlight will be enabled on, so pass crtc_state instead of trying to dereference the state without holding locks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100022Signed-off-by:
-
Zhenyu Wang authored
Current it's strictly checked if PVINFO version matches 1.0 for GVT-g i915 guest which doesn't help for compatibility at all and forces GVT-g host can't extend PVINFO easily with version bump for real compatibility check. This fixes that to check minimal required PVINFO version instead. v2: - drop unneeded version macro - use only major version for sanity check v3: - fix up PVInfo value with kernel type - one indent fix Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chuanxiao Dong <chuanxiao.dong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
- 09 Jun, 2017 7 commits
-
-
Rodrigo Vivi authored
both platforms. We haven't recieved any separated release specifically for Coffee Lake so let's just re-use what is already there for Kabylake. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497038550-30910-1-git-send-email-rodrigo.vivi@intel.com
-
Anusha Srivatsa authored
Coffee Lake reuses Kabylake's HUC firmware. v2: Change Coffeelake to Coffee Lake Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Coffee Lake reuses Kabylake's GuC. v2: Change Coffeelake to Coffee Lake Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Add PCI Ids for U Skus of Coffeelake. v2: Use intel_coffeelake_gt3_info, in accordance to- Rodrigo's patch: v3: rebased v3: Remove unused INTEL_CFL_IDS(Rodrigo). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Add PCI Ids for H Sku by following the BSpec. v2: Remove unused INTEL_CFL_IDS.(Rodrigo). v3: Add missing IDs(Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Add PCI Ids for S Sku following the BSpec. v2: Remove the unused INTEL_CFL_IDS.(Rodrigo) v3: Add missing IDs(Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
Geminilake is now included in CI, making it part of the pre-merge criteria. The support should be in good enough shape, so let's remove the alpha_support flag. Signed-off-by:
-
- 08 Jun, 2017 9 commits
-
-
Rodrigo Vivi authored
The whole Display engine for Coffee Lake is pretty much identical to the Kabylake. For this reason let's reuse all display related production workardounds here even though CFL is not explicit listed at Display workarounds page at Spec. v2: moved intel_pm.c chunck to this patch in order to address all display related w/a in a single place. Cc: Arthur Runyan <arthur.j.runyan@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: -
Rodrigo Vivi authored
So let's force it on the virtual detection. Also it is still the only silicon for now on this PCH, so WARN otherwise. v2: Rebased on top of Cannonlake and added the missed debug message as pointed by DK. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: -
Rodrigo Vivi authored
Coffee Lake is a Intel
® Processor containing Intel® HD Graphics following Kabylake. It is Gen9 graphics based platform on top of CNP PCH. Let's start by adding the platform definition based on previous platforms but yet as preliminary_hw_support. On following patches we will start adding PCI IDs and the platform specific changes. v2: Also add BS2 ring that is present on GT3. As on KBL, according spec: "GT3 also has additional media blocks with second instance of VEBox and VDBox each", i.e. BSD2 ring in our case. Noticed when reviewing PCI ID patches. v3: CFL_PLATFORM instead for CFL_FEATURES because it contains Platform information and no new features when compared to BDW_FEATURES definition. v4: Rebased on top of Cannonlake patches. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: -
Chris Wilson authored
Originally we would enable and disable the breadcrumb interrupt immediately on demand. This was slow enough to have a large impact (>30%) on tasks that hopped between engines. However, by using a shadow to keep the irq alive for an extra interrupt (see commit 67b807a8 ("drm/i915: Delay disabling the user interrupt for breadcrumbs")) and by recently reducing the cost in adding ourselves to the signal tree, we no longer need to spin-request during await_request to avoid delays in throughput tests. Without the earlier patches to stop the wakeup when signaling if the irq was already active, we saw no improvement in execbuf overhead (and corresponding contention in other clients) despite the removal of the spinner in a simple test like glxgears. This means there will be scenarios where now we spend longer enabling the interrupt than we would have spent spinning, but these are not likely to have as noticeable an impact as the high frequency test cases (where there should not be any regression). Ulterior motive: generalising the engine->sync_to to handle different types of semaphores and non-semaphores. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
Enabling the interrupt for the signaler takes a finite amount of time (a few microseconds) during which it is possible for the request to complete. Check afterwards and skip adding the request to the signal rbtree if it complete. Signed-off-by:
-
Chris Wilson authored
The important condition that we need to check after enabling the interrupt for signaling is whether the request completed in the process (and so we missed that interrupt). A large cost in enabling the signaling (rather than waiters) is in waking up the auxiliary signaling thread, but we only need to do so to catch that missed interrupt. If we know we didn't miss any interrupts (because we didn't arm the interrupt) then we can skip waking the auxiliary thread. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Chris Wilson authored
Setting up the irq to signal the request completion takes a finite amount of time, during which it is possible that the request already completed. Check afterwards, just in case, so that we can respond immediately. Signed-off-by:
-
Michel Thierry authored
And prevent calling i915_ggtt_disable_guc twice (the first when GuC init failed, and the second time during driver unload / intel_uc_fini_hw), and hitting the GEM_BUG_ON. v2: Clear enable_guc_loading unconditionally (Michal) Make sure guc_free_load_err_log is still called (Daniele) Don't shoot the messenger (Chris) Fixes: 3950bf3d ("drm/i915/guc: Add onion teardown to the GuC setup") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:Michel Thierry <michel.thierry@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Chris Wilson authored
Replace the large comment about requiring the powerwell for intel_uncore_arm_unclaimed_mmio_detection() by moving the arming of the mmio error detection into the powerwell held for modesetting. Thereby also accomplishing the goal of only arming the mmio detection after a full modeset. Signed-off-by:
-
- 07 Jun, 2017 3 commits
-
-
Rodrigo Vivi authored
This patch clean up a bit the platform definition block in a way to avoid duplications and to let clear that GT3 for the current platform only have the extra Media engine (BSD2). v2: Kabylake IS_KABYLAKE as Anusha noticed. v3: Avoid EXTRA_ENGINE_MASK and list rings out on GT3 to make it more clear. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: -
Rodrigo Vivi authored
Let's be picky and just use PICK directly. So we can extend this later without creating a new PORT_X por every new number of ports we have to handle. Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
The workaround added in commit c6782b76 ("drm/i915/gen9: Reset secondary power well equests left on by DMC/KVMR") needs to be applied on Cannonlake as well. So let's assume any platform using this power well setup will also need and let's just go ahead and remove if condition. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
