- 28 Mar, 2019 26 commits
-
-
Shyam Sundar authored
- I/Os, aborts and tmf should not be queued if flush is in progress. Signed-off-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
- Check proper values before servicing CVL. Signed-off-by:
Chad Dupuis <cdupuis@marvell.com> Signed-off-by:
-
Hannes Reinecke authored
The fc_rport_priv structure is reference counted, so we need to ensure that the reference is increased before accessing the structure. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Chad Dupuis authored
On completions where we do not have a bad scsi_cmnd pointer we should return before the the label lest we do a double kref_put. Signed-off-by:
-
Chad Dupuis authored
- Wait for all the connections to get uploaded. Signed-off-by:
-
Chad Dupuis authored
- Check the validity of various pointers before processing. Signed-off-by:
-
Hannes Reinecke authored
test_bit() is atomic, test_bit() || test_bit() is not. So protect consecutive bit tests with a lock to avoid races. Signed-off-by:
-
Hannes Reinecke authored
fc_rport_create() needs to be called with disc_mutex held. And we should re-assign the 'rdata' pointer in case it got changed. Signed-off-by:
-
Hannes Reinecke authored
qedf_xmit() calls fc_rport_lookup(), but discards the returned rdata structure almost immediately without decreasing the refcount. This leads to a refcount leak and the rdata never to be freed. Signed-off-by:
-
Saurav Kashyap authored
- Check if link is UP before sending and processing any packets on wire. Signed-off-by:
-
Chad Dupuis authored
When receiving an unsolicited frame we could crash on a list traversal in fc_rport_lookup while searching the rport which is associated with our lport. Initialize the lport's discovery node after allocating the lport in __qedf_probe(). Signed-off-by:
-
Andrew Vasquez authored
- Correct memory barriers to make sure all cmnds are flushed. Signed-off-by:
Andrew Vasquez <andrewv@marvell.com> Signed-off-by:
-
Chad Dupuis authored
- If a TMF and cleanup are issued at the same time they could cause a call trace if issued against the same xid as the io_req->tm_done completion is used for both. - Set and clear cleanup bit in cleanup routine. Signed-off-by:
-
Saurav Kashyap authored
An I/O can be in any state when flush is called, it can be in abort, waiting for abort, RRQ send and waiting or TMF send. - HZ can be different on different architecture, correctly set abort timeout value. - Flush can complete the I/Os prematurely, handle refcount for aborted I/Os and for which RRQ is pending. - Differentiate LUN/TARGET reset, as cleanup needs to be send to firmware accordingly. - Add flush mutex to sync cleanup call from abort and flush routine. - Clear abort/outstanding bit on timeout. Signed-off-by:
Shyam Sundar <shyam.sundar@marvell.com> Signed-off-by:
-
Shyam Sundar authored
The purpose of flush routine is to cleanup I/Os to the firmware and complete them to scsi middle layer. This routine is invoked before connection is uploaded because of rport going away. - Don't process any I/Os, aborts, TMFs coming when flush in progress. - Add flags to handle cleanup and release of I/Os because flush can prematurely complete I/Os. - Original command can get completed to driver when cleanup for same is posted to firmware, handle this condition. - Modify flush to handle I/Os in all the states like abort, TMF, RRQ and timeouts. Signed-off-by:
-
Chad Dupuis authored
When mapping the pages from a scatter/gather list from the SCSI layer we only need to follow these rules: - Max SGEs for each I/O request is 256 - No size limit on each SGE - No need to split OS provided SGEs to 4K before sending to firmware. - Slow SGE is applicable only when: - There are > 8 SGEs and any middle SGE is less than a page size (4K) Make necessary changes so that driver follows these rules. Applicable only for Write requests (not for Read requests). No need to check SGE address alignment requirements (first, middle or last) before declaring slow SGE. Signed-off-by:
-
Chad Dupuis authored
Fixes the following crash as the return was missing from the check if an fcport is offloaded. If we hit this code we continue to try to post an invalid task which can lead to the crash: [30259.616411] [0000:61:00.3]:[qedf_post_io_req:989]:3: Session not offloaded yet. [30259.616413] [0000:61:00.3]:[qedf_upload_connection:1340]:3: Uploading connection port_id=490020. [30259.623769] BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 [30259.631645] IP: [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.638816] PGD 0 [30259.640841] Oops: 0000 [#1] SMP [30259.644098] Modules linked in: fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables devlink ip6table_filter ip6_tables iptable_filter vfat fat ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_umad dm_service_time skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel rpcrdma sunrpc rdma_ucm ib_uverbs lrw gf128mul ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi qedr(OE) glue_helper ablk_helper cryptd ib_core dm_round_robin joydev pcspkr ipmi_ssif ses enclosure ipmi_si ipmi_devintf ipmi_msghandler mei_me [30259.715529] mei sg hpilo hpwdt shpchp wmi lpc_ich acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic uas usb_storage mgag200 qedf(OE) i2c_algo_bit libfcoe drm_kms_helper libfc syscopyarea sysfillrect scsi_transport_fc qede(OE) sysimgblt fb_sys_fops ptp ttm pps_core drm qed(OE) smartpqi crct10dif_pclmul crct10dif_common crc32c_intel i2c_core scsi_transport_sas scsi_tgt dm_mirror dm_region_hash dm_log dm_mod [30259.754237] CPU: 9 PID: 977 Comm: kdmwork-253:7 Kdump: loaded Tainted: G W OE ------------ 3.10.0-862.el7.x86_64 #1 [30259.765664] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/04/2018 [30259.775000] task: ffff8c801efd0000 ti: ffff8c801efd8000 task.ti: ffff8c801efd8000 [30259.782505] RIP: 0010:[<ffffffffc035b1ed>] [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.792116] RSP: 0018:ffff8c801efdbbb0 EFLAGS: 00010046 [30259.797444] RAX: 0000000000000000 RBX: ffffa7f1450948d8 RCX: ffff8c7fe5bc40c8 [30259.804600] RDX: ffff8c800715b300 RSI: ffffa7f1450948d8 RDI: ffff8c80169c2480 [30259.811755] RBP: ffff8c801efdbc30 R08: 00000000000000ae R09: ffff8c800a314540 [30259.818911] R10: ffff8c7fe5bc40c8 R11: ffff8c801efdb8ae R12: 0000000000000000 [30259.826068] R13: ffff8c800715b300 R14: ffff8c80169c2480 R15: ffff8c8005da28e0 [30259.833223] FS: 0000000000000000(0000) GS:ffff8c803f840000(0000) knlGS:0000000000000000 [30259.841338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [30259.847100] CR2: 0000000000000198 CR3: 000000081242e000 CR4: 00000000007607e0 [30259.854256] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [30259.861412] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [30259.868568] PKRU: 00000000 [30259.871278] Call Trace: [30259.873737] [<ffffffffc035c948>] qedf_post_io_req+0x148/0x680 [qedf] [30259.880201] [<ffffffffc035d070>] qedf_queuecommand+0x1f0/0x240 [qedf] [30259.886749] [<ffffffffa329b050>] scsi_dispatch_cmd+0xb0/0x240 [30259.892600] [<ffffffffa32a45bc>] scsi_request_fn+0x4cc/0x680 [30259.898364] [<ffffffffa3118ad9>] __blk_run_queue+0x39/0x50 [30259.903954] [<ffffffffa3114393>] __elv_add_request+0xd3/0x260 [30259.909805] [<ffffffffa311baf0>] blk_insert_cloned_request+0xf0/0x1b0 [30259.916358] [<ffffffffc010b622>] map_request+0x142/0x220 [dm_mod] [30259.922560] [<ffffffffc010b716>] map_tio_request+0x16/0x40 [dm_mod] [30259.928932] [<ffffffffa2ebb1f5>] kthread_worker_fn+0x85/0x180 [30259.934782] [<ffffffffa2ebb170>] ? kthread_stop+0xf0/0xf0 [30259.940284] [<ffffffffa2ebae31>] kthread+0xd1/0xe0 [30259.945176] [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40 [30259.951290] [<ffffffffa351f61d>] ret_from_fork_nospec_begin+0x7/0x21 [30259.957750] [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40 [30259.963860] Code: fe 41 55 49 89 d5 41 54 53 48 89 f3 48 83 ec 58 4c 8b 67 28 4c 8b 4e 18 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 4c 8b 7e 58 <49> 8b 84 24 98 01 00 00 48 8b 00 f6 80 31 01 00 00 10 0f 85 0b [30259.983372] RIP [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.990630] RSP <ffff8c801efdbbb0> [30259.994127] CR2: 0000000000000198 Signed-off-by:
-
Chad Dupuis authored
There is currently an overlap where exchange IDs between what is used for offloaded commands and by libfc for ELS commands. Correct this so that exchange ID range is: Offloaded requests: 0 to 0xfff libfc requests: 0x1000 to 0xfffe Signed-off-by:
-
Chad Dupuis authored
If we cannot allocate an ELS middlepath request, simply fail instead of trying to delay and then reallocate. This delay logic is causing soft lockup messages: NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [kworker/2:1:7639] Modules linked in: xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter dm_service_time vfat fat rpcrdma sunrpc ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support qedr(OE) ib_core joydev ipmi_ssif pcspkr hpilo hpwdt sg ipmi_si ipmi_devintf ipmi_msghandler ioatdma shpchp lpc_ich wmi dca acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic qedf(OE) libfcoe mgag200 libfc i2c_algo_bit drm_kms_helper scsi_transport_fc qede(OE) syscopyarea sysfillrect sysimgblt fb_sys_fops ttm qed(OE) drm crct10dif_pclmul e1000e crct10dif_common crc32c_intel scsi_tgt hpsa i2c_core ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 7639 Comm: kworker/2:1 Kdump: loaded Tainted: G OEL ------------ 3.10.0-861.el7.x86_64 #1 Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 07/21/2016 Workqueue: qedf_2_dpc qedf_handle_rrq [qedf] task: ffff959edd628fd0 ti: ffff959ed6f08000 task.ti: ffff959ed6f08000 RIP: 0010:[<ffffffff8355913a>] [<ffffffff8355913a>] delay_tsc+0x3a/0x60 RSP: 0018:ffff959ed6f0bd30 EFLAGS: 00000246 RAX: 000000008ef5f791 RBX: 5f646d635f666465 RCX: 0000025b8ededa2f RDX: 000000000000025b RSI: 0000000000000002 RDI: 0000000000217d1e RBP: ffff959ed6f0bd30 R08: ffffffffc079aae8 R09: 0000000000000200 R10: ffffffffc07952c6 R11: 0000000000000000 R12: 6c6c615f66646571 R13: ffff959ed6f0bcc8 R14: ffff959ed6f0bd08 R15: ffff959e00000028 FS: 0000000000000000(0000) GS:ffff959eff480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4117fa1eb0 CR3: 0000002039e66000 CR4: 00000000003607e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff8355907d>] __const_udelay+0x2d/0x30 [<ffffffffc079444a>] qedf_initiate_els+0x13a/0x450 [qedf] [<ffffffffc0794210>] ? qedf_srr_compl+0x2a0/0x2a0 [qedf] [<ffffffffc0795337>] qedf_send_rrq+0x127/0x230 [qedf] [<ffffffffc078ed55>] qedf_handle_rrq+0x15/0x20 [qedf] [<ffffffff832b2dff>] process_one_work+0x17f/0x440 [<ffffffff832b3ac6>] worker_thread+0x126/0x3c0 [<ffffffff832b39a0>] ? manage_workers.isra.24+0x2a0/0x2a0 [<ffffffff832bae31>] kthread+0xd1/0xe0 [<ffffffff832bad60>] ? insert_kthread_work+0x40/0x40 [<ffffffff8391f637>] ret_from_fork_nospec_begin+0x21/0x21 [<ffffffff832bad60>] ? insert_kthread_work+0x40/0x40 Signed-off-by:
-
Stanley Chu authored
Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when it sees a logical not on the left side of a conditional statement because it thinks the logical not should be applied to the whole statement, not just the left side: drivers/scsi/qla2xxx/qla_nx.c:3703:7: warning: logical not is only applied to the left hand side of this comparison [-Wlogical-not-parentheses] This particular instance was already fixed by commit 0bfe7d3c ("scsi: qla2xxx: Simplify conditional check") upstream but it was reintroduced by commit 3695310e ("scsi: qla2xxx: Update flash read/write routine") in the 5.2/scsi-queue. Fixes: 3695310e ("scsi: qla2xxx: Update flash read/write routine") Link: https://github.com/ClangBuiltLinux/linux/issues/80Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Bart Van Assche authored
Make sd_probe() easier to read by inlining sd_probe_part2(). This patch does not change any functionality. Cc: Lee Duncan <lduncan@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
As explained during the 2018 LSF/MM session about increasing SCSI disk probing concurrency, the problems with the current probing approach are as follows: - The driver core is unaware of asynchronous SCSI LUN probing. wait_for_device_probe() waits for all asynchronous probes except asynchronous SCSI disk probes. - There is unnecessary serialization between sd_probe() and sd_remove(). This can lead to a deadlock. Hence this patch that modifies the sd driver such that it uses the driver core framework for asynchronous probing. The async domains and get_device()/put_device() pairs that became superfluous due to this change are removed. This patch does not affect the time needed for loading the scsi_debug kernel module with parameters delay=0 and max_luns=256. This patch depends on commit ef0ff683 ("driver core: Probe devices asynchronously instead of the driver") that went upstream in kernel version v5.1-rc1. Cc: Lee Duncan <lduncan@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Colin Ian King authored
There are a couple of statements that are incorrectly indented, fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The variable len is not being inintialized and the uninitialized value is being returned. However, this return path is never reached because the default case in the switch statement returns -ENOSYS. Clean up the code by replacing the return -ENOSYS with a break for the default case and returning -ENOSYS at the end of the function. This allows len to be removed. Signed-off-by:
-
tangwenji authored
Reducing the count should be alua_tg_pt_gps_count instead of alua_tg_pt_gps_counter when free alua group. Signed-off-by:
tangwenji <tang.wenji@zte.com.cn> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
- 26 Mar, 2019 7 commits
-
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/scsi/gdth.c:3662:6: warning: variable 'paddr' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] Don't attempt to call dma_free_coherent when buf is NULL (meaning that we never called dma_alloc_coherent and initialized paddr), which avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/402Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/pm8001/pm8001_hwi.c: In function 'mpi_smp_completion': drivers/scsi/pm8001/pm8001_hwi.c:2901:6: warning: variable 'param' set but not used [-Wunused-but-set-variable] drivers/scsi/pm8001/pm8001_hwi.c: In function 'pm8001_bytes_dmaed': drivers/scsi/pm8001/pm8001_hwi.c:3247:24: warning: variable 'sas_ha' set but not used [-Wunused-but-set-variable] They're never used since introduction, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Arnd Bergmann authored
Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA memory in get_fw_boot_info() but attempt to free it anyway: drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (!(val & 0x07)) { ^~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); ^~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true if (!(val & 0x07)) { ^~~~~~~~~~~~~~~~~~~ drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning dma_addr_t buf_dma; ^ = 0 Skip the call to dma_free_coherent() here. Fixes: 2a991c21 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi") Signed-off-by: -
Arnd Bergmann authored
clang -Wuninitialized incorrectly sees a variable being used without initialization: drivers/scsi/lpfc/lpfc_nvme.c:2102:37: error: variable 'localport' is uninitialized when used here [-Werror,-Wuninitialized] lport = (struct lpfc_nvme_lport *)localport->private; ^~~~~~~~~ drivers/scsi/lpfc/lpfc_nvme.c:2059:38: note: initialize the variable 'localport' to silence this warning struct nvme_fc_local_port *localport; ^ = NULL 1 error generated. This is clearly in dead code, as the condition leading up to it is always false when CONFIG_NVME_FC is disabled, and the variable is always initialized when nvme_fc_register_localport() got called successfully. Change the preprocessor conditional to the equivalent C construct, which makes the code more readable and gets rid of the warning. Signed-off-by:James Smart <james.smart@broadcom.com> Signed-off-by:
-
Silvio Cesare authored
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by:
Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Anders Roxell authored
When building the ufs-mediatek module the following warning shows up: WARNING: modpost: missing MODULE_LICENSE() in drivers/scsi/ufs/ufs-mediatek.o Rework to add MODULE_LICENSE,MODULE_AUTHOR and MODULE_DESCRIPTION. Fixes: ddd90623 ("scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Reviewed-by:
-
YueHaibing authored
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
-
- 21 Mar, 2019 7 commits
-
-
tangwenji authored
It should not free cpumask but free conn->conn_ops when zalloc_cpumask_var failed. Signed-off-by:
-
tangwenji authored
In the switch, np_ip_proto and np_sock_type set different values according to np_network_transport, and then uniformly assign values, so the previous values are overwritten. Signed-off-by:
-
Colin Ian King authored
Currently an error return is being assigned to an unsigned size_t varianle and then checked if the result is less than zero which will always be false. Fix this by making ret ssize_t rather than a size_t. Fixes: 0322913c ("scsi: target: Add device product id and revision configfs attributes") Signed-off-by:
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/scsi/ufs/ufs-mediatek.c:112:7: warning: variable 'ret' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (on) ^~ drivers/scsi/ufs/ufs-mediatek.c:120:9: note: uninitialized use occurs here return ret; ^~~ drivers/scsi/ufs/ufs-mediatek.c:112:3: note: remove the 'if' if its condition is always true if (on) ^~~~~~~ drivers/scsi/ufs/ufs-mediatek.c:108:7: warning: variable 'ret' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (!on) ^~~ drivers/scsi/ufs/ufs-mediatek.c:120:9: note: uninitialized use occurs here return ret; ^~~ drivers/scsi/ufs/ufs-mediatek.c:108:3: note: remove the 'if' if its condition is always true if (!on) ^~~~~~~~ drivers/scsi/ufs/ufs-mediatek.c:96:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 2 warnings generated. Remove the default case and initialize ret to -EINVAL to properly fix this warning. Fixes: ddd90623 ("scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips") Link: https://github.com/ClangBuiltLinux/linux/issues/426Signed-off-by: -
YueHaibing authored
Fix sparse warnings: drivers/scsi/ufs/ufs-mediatek.c:19:6: warning: symbol 'ufs_mtk_cfg_unipro_cg' was not declared. Should it be static? drivers/scsi/ufs/ufs-mediatek.c:55:5: warning: symbol 'ufs_mtk_bind_mphy' was not declared. Should it be static? drivers/scsi/ufs/ufs-mediatek.c:342:27: warning: symbol 'ufs_mtk_of_match' was not declared. Should it be static? Signed-off-by:
Mukesh Ojha <mojha@codeaurora.org> Reviewed-by:
-
James Smart authored
Declaring interrupt clear routines as inline is bogus as they are used as an indirect pointer. Remove the inline references. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Bottomley authored
You can't declare a function inline in a header if it doesn't have a body available to the compiler. So realistically you either don't declare it inline or you make it a static inline in the header. I think the latter applies in this case, so this should be the fix Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by:
-
