Running checkpath on card.c shows two locations where
multiple assignments are used.

This patch modifies the assignments into single assignments.
Signed-off-by: Nick Rosbrook <nrosbrook@mail.smcvt.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dev_*() functions print identifying information about the struct device
and should be used instead of pr_*() whenever possible.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch compresses two lines into a single line
if immediate return statement is found. Remove variable data as
it is no longer needed.

It is done using script Coccinelle. And coccinelle uses the following
semantic patch for this compression function

@@
local idexpression ret;
expression e;
@@

-ret =
+return
     e;
-return ret;
Signed-off-by: Nadim Almas <nadim.902@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are few functions where we need to free previously allocated
memory when kmalloc fails. Else it may lead to memory leakage. In
_init_cmd_priv() and _r8712_init_xmit_priv(), in few places we are
not freeing previously allocated memory when kmalloc fails.
Signed-off-by: Souptick joarder <jrdr.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove including <linux/version.h> that don't need it.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following warnings by initializing these variables
to zero and add error check to return early when the check
returns an error.

drivers/staging/comedi/drivers/ni_tio.c: In function ‘ni_tio_set_sync_mode’:
drivers/staging/comedi/drivers/ni_tio.c:492:28: warning: ‘ps’ may be used uninitialized in this function [-Wuninitialized]
drivers/staging/comedi/drivers/ni_tio.c: In function ‘ni_tio_insn_config’:
drivers/staging/comedi/drivers/ni_tio.c:820:2: warning: ‘temp64’ may be used uninitialized in this function [-Wuninitialized]
drivers/staging/comedi/drivers/ni_tio.c:811:6: note: ‘temp64’ was declared her
Signed-off-by: Ted Chen <tedc.37zngo@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some more printk warnings snuck in recently, no one seems to be building
this on 64bit machines...

Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Michael Zoran <mzoran@crowfest.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current order during module probe is prone to race conditions:

* debugfs entries, sysfs entries, platform code

So fix this by swapping the steps debugfs entries and platform code.
As a benefit this saves us a clean up step in the error path.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes the debugfs entries on module unload and fix one
of the many kernel oops after loading the module again.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's possible that get_user_pages() could fail. So evaluate its
return code and handle this error case properly.

This issue has been found by Cppcheck.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We better use sizeof instead of hardcoding buffer length multiple
times. This make it easier to increase the buffer in the future.
In order to keep below 80 chars limit make the variable name shorter.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After device_node usage the refcount must be decremented with
of_node_put().
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The member localport and remoteport are unsigned. So fix the format
string accordingly.

The issue has been found by Cppcheck.
Signed-off-by: Stefam Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The service state is dereferenced before BUG_ON and outside of the
spin lock. So in order to avoid possible NULL pointer dereferences or
races move the whole scope at a safer place.

This issue has been found by Cppcheck.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vc04_services contains a debug logging mechanism.  The log is
maintained in a shared memory area between the kernel and the
firmware.  Changing the sizes of the data in this area would
require a firmware change which is distributed independently
from the kernel binary.

One of the items logged is the address of received messages.
This address is a pointer, but the debugging slot used to store
the information is a 32 bit integer.

Luckily, this value is never interpreted by anything other
then debug tools and it is expected that a human debugging
the kernel interpret it.

This change adds a cast to long before the original cast
to int to silence the warning.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The vchiq_copy_from_user function is not portable
and is consider "bad practice."  Replace this function
with a callback based mechanism that is passed downward
on the stack.  When it is actually time to copy the data,
the callback is called to copy the data into the message.

This callback is provided internally for userland calls
through ioctls on the device.

NOTE: Internal clients will need to be modified to work
with the new internal API.

Test Run:
vchiq_test -p 1
vchiq_test -f 10

Both tests pass.

Internal API Changes:

Change vchi_msg_queue to:
int32_t
vchi_msg_queue(VCHI_SERVICE_HANDLE_T handle,
	       ssize_t (*copy_callback)(void *context, void *dest,
				        size_t offset, size_t maxsize),
	       void *context,
	       uint32_t data_size );

Remove:
vchi_msg_queuev_ex
vchi_msg_queuev

These functions were not implemented anyway so no need to fix them. It's
easier to just remove them.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VCHI messages between the CPU and firmware use 32-bit
bus addresses. Explicitly set the DMA mask and coherent
on all platforms.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Call the sg_init_table function to correctly initialze
the DMA scatterlist.  This function is required to completely
initialize the list and is mandatory if DMA debugging is
enabled in the build configuration.

One of the purposes of sg_init_table is to set
the magic "cookie" on each list element and ensure
the chain end is marked.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align broken line for code readability.
Signed-off-by: Anton Leshchenko <antonl1911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add identifier names for function definition arguments.
Signed-off-by: Anton Leshchenko <antonl1911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of using shift operation use BIT macro for bit field
definitions.
Signed-off-by: Anton Leshchenko <antonl1911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To make code more readable, remove excessive blank lines.
Signed-off-by: Anton Leshchenko <antonl1911@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit adds a default condition to those case statements that do not
already have one. This is done to provide both a logical covering of all
conditions, as well as to maintain uniformity with the rest of the Unisys
driver set.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adjusts the formatting of a variable assignment to use fewer line breaks,
making it follow the convention used elsewhere in the s-Par driver set.
Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function my_device_destroy should call chipset_device_destroy
directly instead of calling device_epilog. Since this was the last
function to use device_epilog that function was removed as well.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function my_device_changestate should call chipset_device_changestate
directly instead of calling device_epilog.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function my_device_changestate was not sending a response if there
was an error with the CONTROLVM message.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't have my_device_create call device_epilog, have it call
chipset_device_create directly instead.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the function bus_epilog since no one is calling it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add error handling to bus_create function.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do proper error handling and return error codes instead of just ignoring
them.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Have bus_destroy call chipset_bus_destroy directly instead of going
through bus_epilog.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Have bus_create call chipset_bus_create directly instead of going
through the function bus_epilog.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch addresses the problem that we were sending double responses
back to the s-Par Firmware when processing CONTROLVM Messages. Every
message responds individually and the epilog functions would send a
response as well.

Since a message could delay the response, it was decided to remove the
extra response from the epilog function.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed intializations from visorchipset_open(), visorchipset_init()
and moved the memset in initialize_controlvm_payload_info() down in
case of early returns from the function.
Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Previously, the sysfs entry (assuming traditional sysfs mountpoint):

    /sys/bus/visorbus/devices/visorbus<n>/client_bus_info

violated kernel conventions by printing more than one item.  This along
with the fact that the data emitted was diagnostic data (intended to
shadow the client driver info provided via s-Par livedumps) made it a
logical candidate for debugfs.  So this patch moves this sysfs entry to
debugfs as (assuming traditional debugfs mountpoint):

    /sys/kernel/debug/visorbus/visorbus<n>/client_bus_info

Data for this debugfs is emitted using the preferred seq_file interface,
which allowed a vastly-simplified version of vbuschannel_print_devinfo()
to format the individual output components.

Functionality was verified as follows:

  [root@sparguest visorbus]# mount | grep debug
  debugfs on /sys/kernel/debug type debugfs (rw)
  [root@sparguest visorbus]# pwd
  /sys/kernel/debug/visorbus
  [root@sparguest visorbus]# l visorbus1/
  total 0
  drwxr-xr-x 2 root root 0 Sep 28 16:36 .
  drwxr-xr-x 4 root root 0 Sep 28 16:36 ..
  -r--r----- 1 root root 0 Sep 28 16:36 client_bus_info
  [root@sparguest visorbus]# l visorbus2
  total 0
  drwxr-xr-x 2 root root 0 Sep 28 16:36 .
  drwxr-xr-x 4 root root 0 Sep 28 16:36 ..
  -r--r----- 1 root root 0 Sep 28 16:36 client_bus_info
  [root@sparguest visorbus]# cat visorbus1/client_bus_info
  Client device / client driver info for s-Par Console partition (vbus #1):
     chipset          visorchipset     kernel ver. 4.8.0-rc6-ARCH+
     clientbus        visorbus         kernel ver. 4.8.0-rc6-ARCH+
  [2]keyboard         visorinput       kernel ver. 4.8.0-rc6-ARCH+
  [3]mouse            visorinput       kernel ver. 4.8.0-rc6-ARCH+
  [root@sparguest visorbus]# cat visorbus2/client_bus_info
  Client device / client driver info for s-Par IOVM partition (vbus #2):
     chipset          visorchipset     kernel ver. 4.8.0-rc6-ARCH+
     clientbus        visorbus         kernel ver. 4.8.0-rc6-ARCH+
  [0]ultravnic        visornic         kernel ver. 4.8.0-rc6-ARCH+
  [1]ultravnic        visornic         kernel ver. 4.8.0-rc6-ARCH+
  [2]sparvhba         visorhba         kernel ver. 4.8.0-rc6-ARCH+
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The kernel convention is for DEVICE_ATTR_RO(<attr>) definitions to occur
immediately after the functions that implement the attribute behaviors.
DEVICE_ATTR_RO definitions in visorbus_main.c have been moved to comply
with this convention.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The affected files have been modified to remove redundant spaces after
casts to solve checkpatch.pl checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.10b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle

This includes two branch merges for elements that may also go via MFD.

New device support
* cros_ec
  - new driver to support these Chrome OS contiguous sensors which are behind
    the Chrome OS embedded controller.  Requires a few minor MFD and chrome
    platform changes.  One follow up fix deals with some dependency issues in
    Kconfig.
* mpu-3050
  - new driver and device tree bindings for this venerable device.
* st_accel
  - support for the lng2dm an

Driver features
* ad7192
  - Add DVdd regulator handling
* ad9832
  - Add DVDD regulator handling
* at91
  - Suspend and resume support
* si7020
  - Device tree bindings
* ti-am335x
  - DMA support - uses dma to accelerate short bursts of read back rather
  than full blown DMA buffer support.  Greatly improved performance.
  Includes an MFD addition to give access to the address needed for DMA.
* tsl2583
  - Device tree bindings

Cleanups and minor fixes
* ad7192
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
  - Rename reg variable to reflect which regulator it is
* ad5933
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* ad7746
  - Fix a missing return value (fallout from previous patch set)
* ad7780
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* ad9832
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
  - Rename reg regulator to reflect which one it is
* ad9834
  - Fix regulator naming to match datasheet
  - Handle regulator errors correctly (so as to not break deferred probing)
* hts221
  - Remove a duplicated include
* maxim thermocouple
  - Handle a wrong storage side in read function.  Prevent any problems that
  might be introduced by additions to this driver in future.
* tsl2583 - big set from Brian Masney to drive this towards a staging
  graduation.
  - Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps)
  - Improved error handling in various functions
  - Drop redundant power_state custom sysfs attribute.
  - Use IIO_*_ATTR* macros for remaining attributes.
  - Return an error code to userspace on invalid parameters being writen to
    sysfs files.
  - Add locking to various attribute accesses to remove possible races.
  - Add defines for various magic numbers.
  - Use smbus_read_byte_data instead of a write_byte followed by read_byte.
  - Query only relevant registers in probe.
  - Tidy up ordering of code comments.
  - Remove a pointless power off sequence in taos_chip_on.
  - Don't bother shutting down the chip when updating the lux table.
  The table is held entirely in the driver and doesn't effect the chip at all.
  - Drop a redundant i2c call in taos_als_calibrate where the same register
  is read twice in a row.

taos_als_calibrate() queries the control register to determine if the
unit is powered on and has the ADC enabled. It then queries the same
register a second time to determine if the ADC reading is valid. This
patch removes the redundant i2c_smbus_read_byte_data() call.

Verified that the driver still functions correctly using a TSL2581
hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>