We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

Note that we need to use "ti,no-idle" here.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver.

Note that we no longer need ti,no-reset-on-init as the rstctrl resets
are properly handled by the reset driver and claimed by the RTC driver.
And we need to squash together the module ranges for driver compability.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

For genpd we need the RTC powerdomain configured.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

To drop the legacy platform data for am3 control module, we need
to configure the missing functional clock and tag the module to
not idle as platform data also had it configured with
HWMOD_INIT_NO_IDLE.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We now manage clocksource and clockevent clocks directly with
timer-ti-dm-systimer. In order to use genpd with prm_omap,
GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system
timer related interconnect clocks enabled until clocksource suspend
is done.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add remaining PRM instances for the am43xx SoC. Additionally enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add genpd support for mpu, rtc, tamper, cefuse, per and wkup instances.

Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

In order for suspend and resume to work with genpd on am4, we must keep
l3 main clock always on. Otherwise prm_omap driver will shut down the l3
main clock on suspend when simple-pm-bus and GENPD_FLAG_PM_CLK are used.
Note that we already keep the l3 main clock always on with the legacy
platform code.

Later on we may want to start managing the l3 main clock with a dedicated
interconnect driver instead of using simple-pm-bus and GENPD_FLAG_PM_CLK.

Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

If we have only am3 selected, there's no need to build the
hwmod related code as we are probing devices with device tree
data.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop the remaining legacy platform data as we are
probing devices with device tree data.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now enable simple-pm-bus to use genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now enable simple-pm-bus to use genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now enable simple-pm-bus to use genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now enable simple-pm-bus to use genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

Note that we need to use "ti,no-idle" here.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.

Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver.

Note that we no longer need ti,no-reset-on-init as the rstctrl resets
are properly handled by the reset driver and claimed by the RTC driver.
And we need to squash together the module ranges for driver compability.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

For genpd we need the RTC powerdomain configured.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.

To drop the legacy platform data for am3 control module, we need
to configure the missing functional clock and tag the module to
not idle as platform data also had it configured with
HWMOD_INIT_NO_IDLE.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We now manage clocksource and clockevent clocks directly with
timer-ti-dm-systimer. In order to use genpd with prm_omap,
GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system
timer related interconnect clocks enabled until clocksource suspend
is done.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add remaining PRM instances for the am33xx SoC. Additionally, enable the
genpd support for them.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
[tony@atomide.com: fixed a typo for #power-domain-cells]
Signed-off-by: Tony Lindgren <tony@atomide.com>

In order to move wkup_m3 to probe without platform data, let's add
support for using optional reset control driver if configured in the
dts. With this change and the related dts change, we can start
dropping the platform data for am335x.

And once wkup_m3 no longer needs platform data, we can simply drop the
related legacy reset platform data callbacks from wkup_m3 driver later
on after also am437x no longer depends on it.

Cc: linux-remoteproc@vger.kernel.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

To prepare for moving to use genpd, let's enable basic PM
runtime support.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add genpd support for per, wkup, mpu, rtc and cefuse instances.

Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

In order to probe l3 and l4 interconnects with simple-pm-bus, we want
genpd to manage the clocks for the interconnects. For interconnect target
modules, we already have ti-sysc manage the clocks so let's skipe managing
clocks for ti-sysc modules.

Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

In order for suspend and resume to work with genpd on am3, we must keep
l3 main clock always on. Otherwise prm_omap driver will shut down the l3
main clock on suspend when simple-pm-bus and GENPD_FLAG_PM_CLK are used.
Note that we already keep the l3 main clock always on with the legacy
platform code.

Later on we may want to start managing the l3 main clock with a dedicated
interconnect driver instead of using simple-pm-bus and GENPD_FLAG_PM_CLK.

Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We need to enable no-reset-on-init quirk for GPMC if the config
option for CONFIG_OMAP_GPMC_DEBUG is set. Otherwise the GPMC
driver code is unable to show the bootloader configured timings.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Some modules like MPU have a powerdomain and functional clock but not
necessarily any control registers. Let's allow configuring interconnect
target modules with no control registers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

In preparation for probing the interconnects with simple-pm-bus to
make use of genpd, we need to probe the always-on PRCM first for the
clocks needed by l4_wkup instance.
Signed-off-by: Tony Lindgren <tony@atomide.com>

If we have no hwmods configured and omap_hwmod_init() is not called,
we don't want to call omap_hwmod_setup_all() as it will fail with
checks for configured MPU at least.
Signed-off-by: Tony Lindgren <tony@atomide.com>

The rstctrl reset must be asserted after gating the module clock as
described in the TRM at least for IVA. Otherwise the rstctrl reset
done with module clock enabled can hang the system.

Note that this issue is has been only seen with related IVA changes
that we do not currently have merged. So probably no need to apply
this patch as a fix.
Signed-off-by: Tony Lindgren <tony@atomide.com>

If a rstctrl reset bit is already deasserted, we can just bail out early
not wait for rstst to clear. Otherwise we can have deassert fail for
already deasserted resets.

Fixes: c5117a78 ("soc: ti: omap-prm: poll for reset complete during de-assert")
Signed-off-by: Tony Lindgren <tony@atomide.com>

Bail out early from sysc_wait_softreset() just like we do in sysc_reset()
if there's no sysstatus srst_shift to fix a bogus resetdone warning on
enable as suggested by Grygorii Strashko <grygorii.strashko@ti.com>.

We do not currently handle resets for modules that need writing to the
sysstatus register. If we at some point add that, we also need to add
SYSS_QUIRK_RESETDONE_INVERTED flag for cpsw as the sysstatus bit is low
when reset is done as described in the am335x TRM "Table 14-202
SOFT_RESET Register Field Descriptions"

Fixes: d46f9fbe ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit")
Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>