- 14 May, 2019 3 commits
-
-
Andi Kleen authored
commit ed5194c2 upstream Microarchitectural Data Sampling (MDS), is a class of side channel attacks on internal buffers in Intel CPUs. The variants are: - Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126) - Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130) - Microarchitectural Load Port Data Sampling (MLPDS) (CVE-2018-12127) MSBDS leaks Store Buffer Entries which can be speculatively forwarded to a dependent load (store-to-load forwarding) as an optimization. The forward can also happen to a faulting or assisting load operation for a different memory address, which can be exploited under certain conditions. Store buffers are partitioned between Hyper-Threads so cross thread forwarding is not possible. But if a thread enters or exits a sleep state the store buffer is repartitioned which can expose data from one thread to the other. MFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage L1 miss situations and to hold data which is returned or sent in response to a memory or I/O operation. Fill buffers can forward data to a load operation and also write data to the cache. When the fill buffer is deallocated it can retain the stale data of the preceding operations which can then be forwarded to a faulting or assisting load operation, which can be exploited under certain conditions. Fill buffers are shared between Hyper-Threads so cross thread leakage is possible. MLDPS leaks Load Port Data. Load ports are used to perform load operations from memory or I/O. The received data is then forwarded to the register file or a subsequent operation. In some implementations the Load Port can contain stale data from a previous operation which can be forwarded to faulting or assisting loads under certain conditions, which again can be exploited eventually. Load ports are shared between Hyper-Threads so cross thread leakage is possible. All variants have the same mitigation for single CPU thread case (SMT off), so the kernel can treat them as one MDS issue. Add the basic infrastructure to detect if the current CPU is affected by MDS. [ tglx: Rewrote changelog ] Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Frederic Weisbecker <frederic@kernel.org> Reviewed-by:
Jon Masters <jcm@redhat.com> Tested-by:
-
Thomas Gleixner authored
commit 36ad3513 upstream The CPU vulnerability whitelists have some overlap and there are more whitelists coming along. Use the driver_data field in the x86_cpu_id struct to denote the whitelisted vulnerabilities and combine all whitelists into one. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit d8eabc37 upstream Greg pointed out that speculation related bit defines are using (1 << N) format instead of BIT(N). Aside of that (1 << N) is wrong as it should use 1UL at least. Clean it up. [ Josh Poimboeuf: Fix tools build ] Reported-by:
-
- 11 May, 2019 31 commits
-
-
Greg Kroah-Hartman authored
-
Will Deacon authored
commit 03110a5c upstream. Our futex implementation makes use of LDXR/STXR loops to perform atomic updates to user memory from atomic context. This can lead to latency problems if we end up spinning around the LL/SC sequence at the expense of doing something useful. Rework our futex atomic operations so that we return -EAGAIN if we fail to update the futex word after 128 attempts. The core futex code will reschedule if necessary and we'll try again later. Cc: <stable@kernel.org> Fixes: 6170a974 ("arm64: Atomic operations") Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit 6b4f4bc9 upstream. Some futex() operations, including FUTEX_WAKE_OP, require the kernel to perform an atomic read-modify-write of the futex word via the userspace mapping. These operations are implemented by each architecture in arch_futex_atomic_op_inuser() and futex_atomic_cmpxchg_inatomic(), which are called in atomic context with the relevant hash bucket locks held. Although these routines may return -EFAULT in response to a page fault generated when accessing userspace, they are expected to succeed (i.e. return 0) in all other cases. This poses a problem for architectures that do not provide bounded forward progress guarantees or fairness of contended atomic operations and can lead to starvation in some cases. In these problematic scenarios, we must return back to the core futex code so that we can drop the hash bucket locks and reschedule if necessary, much like we do in the case of a page fault. Allow architectures to return -EAGAIN from their implementations of arch_futex_atomic_op_inuser() and futex_atomic_cmpxchg_inatomic(), which will cause the core futex code to reschedule if necessary and return back to the architecture code later on. Cc: <stable@kernel.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Dan Carpenter authored
commit 476c7e1d upstream. The problem here is that addr can be I3C_BROADCAST_ADDR (126). That means we're shifting by (126 * 2) % 64 which is 60. The I3C_ADDR_SLOT_STATUS_MASK is an enum which is an unsigned int in GCC so shifts greater than 31 are undefined. Fixes: 3a379bbc ("i3c: Add core I3C infrastructure") Cc: <stable@vger.kernel.org> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Ross Zwisler authored
commit 0efa3334 upstream. Currently in sst_dsp_new() if we get an error return from sst_dma_new() we just print an error message and then still complete the function successfully. This means that we are trying to run without sst->dma properly set up, which will result in NULL pointer dereference when sst->dma is later used. This was happening for me in sst_dsp_dma_get_channel(): struct sst_dma *dma = dsp->dma; ... dma->ch = dma_request_channel(mask, dma_chan_filter, dsp); This resulted in: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: sst_dsp_dma_get_channel+0x4f/0x125 [snd_soc_sst_firmware] Fix this by adding proper error handling for the case where we fail to set up DMA. This change only affects Haswell and Broadwell systems. Baytrail systems explicilty opt-out of DMA via sst->pdata->resindex_dma_base being set to -1. Signed-off-by:
Ross Zwisler <zwisler@google.com> Cc: stable@vger.kernel.org Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 3ae62a42 upstream. This is the UAS version of 747668db usb-storage: Set virt_boundary_mask to avoid SG overflows We are not as likely to be vulnerable as storage, as it is unlikelier that UAS is run over a controller without native support for SG, but the issue exists. The issue has been existing since the inception of the driver. Fixes: 115bb1ff ("USB: Add UAS driver") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Chen-Yu Tsai authored
commit 62611abc upstream. The code path for Macs goes through bcm_apple_get_resources(), which skips over the code that sets up the regulator supplies. As a result, the call to regulator_bulk_enable() / regulator_bulk_disable() results in a NULL pointer dereference. This was reported on the kernel.org Bugzilla, bug 202963. Unbreak Broadcom Bluetooth support on Intel Macs by checking if the supplies were set up before enabling or disabling them. The same does not need to be done for the clocks, as the common clock framework API checks for NULL pointers. Fixes: 75d11676 ("Bluetooth: hci_bcm: Add support for regulator supplies") Cc: <stable@vger.kernel.org> # 5.0.x Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Tested-by:
Imre Kaloz <kaloz@openwrt.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Luiz Augusto von Dentz authored
commit ba8f5289 upstream. l2cap_le_flowctl_init was reseting the tx_credits which works only for outgoing connection since that set the tx_credits on the response, for incoming connections that was not the case which leaves the channel without any credits causing it to be suspended. Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
-
Marcel Holtmann authored
commit d5bb334a upstream. The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Young Xiao authored
commit a1616a5a upstream. Struct ca is copied from userspace. It is not checked whether the "name" field is NULL terminated, which allows local users to obtain potentially sensitive information from kernel stack memory, via a HIDPCONNADD command. This vulnerability is similar to CVE-2011-1079. Signed-off-by:
Young Xiao <YangX92@hotmail.com> Signed-off-by:
-
Quinn Tran authored
commit 2137490f upstream. This patch fixes issue reported by some of the customers, who discovered that after cable pull scenario the devices disappear and path seems to remain in blocked state. Once the device reappears, driver does not seem to update path to online. This issue appears because of the defer flag creating race condition where the same session reappears. This patch fixes this issue by indicating SCSI-ML of device lost when qlt_free_session_done() is called from qlt_unreg_sess(). Fixes: 41dc529a ("qla2xxx: Improve RSCN handling in driver") Signed-off-by:
Quinn Tran <qtran@marvell.com> Cc: stable@vger.kernel.org #4.19 Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Giridhar Malavali authored
commit ffc81fc0 upstream. This patch sets remote_port_devloss value to 0. This indicates to FC-NVMe transport that driver is unloading and transport should not retry. Fixes: e476fe8a ("scsi: qla2xxx: Fix unload when NVMe devices are configured") Cc: stable@vger.kernel.org Signed-off-by:
Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Andrew Vasquez authored
commit 5cbdae10 upstream. Commit e6f77540 ("scsi: qla2xxx: Fix an integer overflow in sysfs code") incorrectly set 'optrom_region_size' to 'start+size', which can overflow option-rom boundaries when 'start' is non-zero. Continue setting optrom_region_size to the proper adjusted value of 'size'. Fixes: e6f77540 ("scsi: qla2xxx: Fix an integer overflow in sysfs code") Cc: stable@vger.kernel.org Signed-off-by:
Andrew Vasquez <andrewv@marvell.com> Signed-off-by:
-
Silvio Cesare authored
commit e7f7b6f3 upstream. Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by:
Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Samuel Holland authored
commit a84014e1 upstream. When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but not REGMAP_MMIO, so the kernel fails to link with an undefined reference to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in drivers/base/regmap/Kconfig. This creates the following dependency loop: drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3 drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY instead of depending on it. This matches the use of GENERIC_PHY by all but two other drivers. Cc: <stable@vger.kernel.org> # 4.19 Fixes: 5828729b ("soc: sunxi: export a regmap for EMAC clock reg on A64") Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Hans de Goede authored
commit c8afd034 upstream. Commit 48402cee ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq") makes acpi_lpss_{suspend_late,resume_early}() bail early on BYT/CHT as resume_from_noirq is set. This means that on resume from hibernate dw_i2c_plat_resume() doesn't get called by the restore_early callback, acpi_lpss_resume_early(). Instead it should be called by the restore_noirq callback matching how things are done when resume_from_noirq is set and we are doing a regular resume. Change the restore_noirq callback to acpi_lpss_resume_noirq so that dw_i2c_plat_resume() gets properly called when resume_from_noirq is set and we are resuming from hibernate. Likewise also change the poweroff_noirq callback so that dw_i2c_plat_suspend gets called properly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202139 Fixes: 48402cee ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq") Reported-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Gregory CLEMENT authored
commit 8db82563 upstream. The frequency calculation was based on the current(max) frequency of the CPU. However for low frequency, the value used was already the parent frequency divided by a factor of 2. Instead of using this frequency, this fix directly get the frequency from the parent clock. Fixes: 92ce45fb ("cpufreq: Add DVFS support for Armada 37xx") Cc: <stable@vger.kernel.org> Reported-by:
Christian Neubert <christian.neubert.86@gmail.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
commit 447ccb4e upstream. The of_device_id table needs to be registered as module alias in order for automatic module loading to pick the kernel module based on the DeviceTree compatible. So add MODULE_DEVICE_TABLE() to make this happen. Fixes: e13d7572 ("iio: adc: Add QCOM SPMI PMIC5 ADC driver") Cc: stable@vger.kernel.org Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Alexander Shishkin authored
commit e60e9a4b upstream. This adds support for Intel TH on Comet Lake. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Prasad Sodagudi authored
commit 59c39840 upstream. When irq_set_affinity_notifier() replaces the notifier, then the reference count on the old notifier is dropped which causes it to be freed. But nothing ensures that the old notifier is not longer queued in the work list. If it is queued this results in a use after free and possibly in work list corruption. Ensure that the work is canceled before the reference is dropped. Signed-off-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
-
Alan Stern authored
commit 747668db upstream. The USB subsystem has always had an unusual requirement for its scatter-gather transfers: Each element in the scatterlist (except the last one) must have a length divisible by the bulk maxpacket size. This is a particular issue for USB mass storage, which uses SG lists created by the block layer rather than setting up its own. So far we have scraped by okay because most devices have a logical block size of 512 bytes or larger, and the bulk maxpacket sizes for USB 2 and below are all <= 512. However, USB 3 has a bulk maxpacket size of 1024. Since the xhci-hcd driver includes native SG support, this hasn't mattered much. But now people are trying to use USB-3 mass storage devices with USBIP, and the vhci-hcd driver currently does not have full SG support. The result is an overflow error, when the driver attempts to implement an SG transfer of 63 512-byte blocks as a single 3584-byte (7 blocks) transfer followed by seven 4096-byte (8 blocks) transfers. The device instead sends 31 1024-byte packets followed by a 512-byte packet, and this overruns the first SG buffer. Ideally this would be fixed by adding better SG support to vhci-hcd. But for now it appears we can work around the problem by asking the block layer to respect the maxpacket limitation, through the use of the virt_boundary_mask. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Seth Bollinger <Seth.Bollinger@digi.com> Tested-by:
-
Johan Hovold authored
commit 764478f4 upstream. Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle(). First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU. CPU 1 CPU 2 ================ ================ complete() unthrottle() process_urb(); smp_mb__before_atomic(); set_bit(i, free); if (test_and_clear_bit(i, free)) submit_urb(); Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set. CPU 1 CPU 2 ================ ================ complete() unthrottle() set_bit(i, free); throttled = 0; smp_mb__after_atomic(); smp_mb(); if (throttled) if (test_and_clear_bit(i, free)) return; submit_urb(); Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition. Also note that the first race was fixed by 36e59e0d ("cdc-acm: fix race between callback and unthrottle") back in 2015, but the bug was reintroduced a year later. Fixes: 1aba579f ("cdc-acm: handle read pipe errors") Fixes: 088c64f8 ("USB: cdc-acm: re-write read processing") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
-
Ji-Ze Hong (Peter Hong) authored
commit 804dbee1 upstream. The F81232 will use interrupt worker to handle MSR change. This patch will fix the issue that interrupt work should stop in close() and suspend(). This also fixes line-status events being disabled after a suspend cycle until the port is re-opened. Signed-off-by:
Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> [ johan: amend commit message ] Fixes: 87fe5adc ("USB: f81232: implement read IIR/MSR with endpoint") Cc: stable <stable@vger.kernel.org> # 4.1 Signed-off-by:
-
Thinh Nguyen authored
commit 8d791929 upstream. The max possible value for DCTL.LPM_NYET_THRES is 15 and not 255. Change the default value to 15. Cc: stable@vger.kernel.org Fixes: 80caf7d2 ("usb: dwc3: add lpm erratum support") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Marc Gonzalez authored
commit 77a49465 upstream. Keep EXTCON support optional, as some platforms do not need it. Do the same for USB_DWC3_OMAP while we're at it. Fixes: 3def4031 ("usb: dwc3: add EXTCON dependency for qcom") Signed-off-by:
Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Christian Gromm authored
commit 98592c1f upstream. This patch fixes the usage of the wrong struct device when calling function snd_card_new. Reported-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Fixes: 69c90cf1 ("staging: most: sound: call snd_card_new with struct device") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Suresh Udipi authored
commit af708900 upstream. It looks like v4.18-rc1 commit [0] which upstreams mld-1.8.0 commit [1] missed to fix the memory leak in mod_exit function. Do it now. [0] aba258b7 ("staging: most: cdev: fix chrdev_region leak") [1] https://github.com/microchip-ais/linux/commit/a2d8f7ae7ea381 ("staging: most: cdev: fix leak for chrdev_region") Signed-off-by:
Suresh Udipi <sudipi@jp.adit-jv.com> Signed-off-by:
-
Tetsuo Handa authored
commit ae26aa84 upstream. Since wilc_set_multicast_list() is called with dev->addr_list_lock spinlock held, we can't use GFP_KERNEL memory allocation. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: e624c58c ("staging: wilc1000: refactor code to avoid use of wilc_set_multicast_list global") Cc: Ajay Singh <ajay.kathat@microchip.com> Reviewed-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 47830c11 upstream. Since moving the message buffers off the stack, the dynamically allocated get-prop-descriptor request buffer is incorrectly sized due to using the pointer rather than request-struct size when creating the operation. Fortunately, the pointer size is always larger than this one-byte request, but this could still cause trouble on the remote end due to the unexpected message size. Fixes: 9d15134d ("greybus: power_supply: rework get descriptors") Cc: stable <stable@vger.kernel.org> # 4.9 Cc: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Andrey Ryabinin authored
commit f0996bc2 upstream. Building lib/ubsan.c with gcc-9 results in a ton of nasty warnings like this one: lib/ubsan.c warning: conflicting types for built-in function ‘__ubsan_handle_negate_overflow’; expected ‘void(void *, void *)’ [-Wbuiltin-declaration-mismatch] The kernel's declarations of __ubsan_handle_*() often uses 'unsigned long' types in parameters while GCC these parameters as 'void *' types, hence the mismatch. Fix this by using 'void *' to match GCC's declarations. Reported-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Fixes: c6d30853 ("UBSAN: run-time undefined behavior sanity checker") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dexuan Cui authored
commit a0033bd1 upstream. With CONFIG_DEBUG_PREEMPT=y, the put_cpu_ptr() triggers an underflow warning in preempt_count_sub(). Fixes: 37cdd991 ("vmbus: put related per-cpu variable together") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Sasha Levin (Microsoft) <sashal@kernel.org> Signed-off-by:
-
- 06 May, 2019 1 commit
-
-
Linus Torvalds authored
-
- 05 May, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "I'd like to apologize for this very late pull request: I was dithering through the week whether to send the fixes, and then yesterday Jiri's crash fix for a regression introduced in this cycle clearly marked perf/urgent as 'must merge now'. Most of the commits are tooling fixes, plus there's three kernel fixes via four commits: - race fix in the Intel PEBS code - fix an AUX bug and roll back a previous attempt - fix AMD family 17h generic HW cache-event perf counters The largest diffstat contribution comes from the AMD fix - a new event table is introduced, which is a fairly low risk change but has a large linecount" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix race in intel_pmu_disable_event() perf/x86/intel/pt: Remove software double buffering PMU capability perf/ring_buffer: Fix AUX software double buffering perf tools: Remove needless asm/unistd.h include fixing build in some places tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv tools build: Add -ldl to the disassembler-four-args feature test perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet perf cs-etm: Don't check cs_etm_queue::prev_packet validity perf report: Report OOM in status line in the GTK UI perf bench numa: Add define for RUSAGE_THREAD if not present tools lib traceevent: Change tag string for error perf annotate: Fix build on 32 bit for BPF annotation tools uapi x86: Sync vmx.h with the kernel perf bpf: Return value with unlocking in perf_env__find_btf() MAINTAINERS: Include vendor specific files under arch/*/events/* perf/x86/amd: Update generic hardware cache events for Family 17h -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a kobject memory leak in the cpufreq code" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cpufreq: Fix kobject memleak
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "Disable function tracing during early SME setup to fix a boot crash on SME-enabled kernels running distro kernels (some of which have function tracing enabled)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/mem_encrypt: Disable all instrumentation for early SME setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: - a couple of ->i_link use-after-free fixes - regression fix for wrong errno on absent device name in mount(2) (this cycle stuff) - ancient UFS braino in large GID handling on Solaris UFS images (bogus cut'n'paste from large UID handling; wrong field checked to decide whether we should look at old (16bit) or new (32bit) field) * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour Abort file_remove_privs() for non-reg. files [fix] get rid of checking for absent device name in vfs_get_tree() apparmorfs: fix use-after-free on symlink traversal securityfs: fix use-after-free on symlink traversal
-
Jiri Olsa authored
New race in x86_pmu_stop() was introduced by replacing the atomic __test_and_clear_bit() of cpuc->active_mask by separate test_bit() and __clear_bit() calls in the following commit: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler") The race causes panic for PEBS events with enabled callchains: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:perf_prepare_sample+0x8c/0x530 Call Trace: <NMI> perf_event_output_forward+0x2a/0x80 __perf_event_overflow+0x51/0xe0 handle_pmi_common+0x19e/0x240 intel_pmu_handle_irq+0xad/0x170 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x69/0x110 default_do_nmi+0x3e/0x100 do_nmi+0x11a/0x180 end_repeat_nmi+0x16/0x1a RIP: 0010:native_write_msr+0x6/0x20 ... </NMI> intel_pmu_disable_event+0x98/0xf0 x86_pmu_stop+0x6e/0xb0 x86_pmu_del+0x46/0x140 event_sched_out.isra.97+0x7e/0x160 ... The event is configured to make samples from PEBS drain code, but when it's disabled, we'll go through NMI path instead, where data->callchain will not get allocated and we'll crash: x86_pmu_stop test_bit(hwc->idx, cpuc->active_mask) intel_pmu_disable_event(event) { ... intel_pmu_pebs_disable(event); ... EVENT OVERFLOW -> <NMI> intel_pmu_handle_irq handle_pmi_common TEST PASSES -> test_bit(bit, cpuc->active_mask)) perf_event_overflow perf_prepare_sample { ... if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY)) data->callchain = perf_callchain(event, regs); CRASH -> size += data->callchain->nr; } </NMI> ... x86_pmu_disable_event(event) } __clear_bit(hwc->idx, cpuc->active_mask); Fixing this by disabling the event itself before setting off the PEBS bit. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Arcari <darcari@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Lendacky Thomas <Thomas.Lendacky@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler") Link: http://lkml.kernel.org/r/20190504151556.31031-1-jolsa@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
