- 16 Oct, 2018 12 commits
-
-
Lucas De Marchi authored
Display WA #1178 is meant to fix Aux channel voltage swing too low with some type C dongles. It applies to external ports on combo phy. On Icelake this is port A and B when those are not eDP. v2: follow the spec to the letter: include Aux A and just check if it's not eDP instead of checking only for Aux B. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
We have to look at crtc_state, so pass that instead. Also cleanup the use of dev vs dev_priv, we really want to pass along dev_priv. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-10-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
Instead of derferencing crtc->config, look at crtc_state. Signed-off-by:
-
Maarten Lankhorst authored
The CRTC is idle at this point, so we can dereference crtc->state safely. Signed-off-by:
-
Maarten Lankhorst authored
We know the crtc is idle because we're at the beginning of sanitization, so just dereference crtc->state instead. Signed-off-by:
-
Maarten Lankhorst authored
No need to look at crtc->config when we have crtc_state in the caller. Signed-off-by:
-
Maarten Lankhorst authored
has_drrs is a flag we can't read out. We set it when seamless DRRS is enabled in pipe_config, so intel_dump_pipe_config() and intel_pipe_config_compare() will continue to do the right thing when has_drrs is set on the real state. This removes one more dereference of crtc->config. While at it, fixup the comment and also read out M2_N2 for CHV, since we program it in the set_m_n function. Changes since v1: - Only read out M2/N2 on platforms that support DRRS. Signed-off-by:
-
Maarten Lankhorst authored
We already have a perfectly nice pipe_config, use that instead. Signed-off-by:
-
Maarten Lankhorst authored
Another user of crtc->config gone. The functions it calls also needed crtc->config, so convert those as well. Signed-off-by:
-
Mika Kuoppala authored
Disable master interrupt before reading level indications. This will close a race where we get a level indication between reading and disabling, generating an extra interrupt where we could have avoided one. Further, as the reading acts also as a post, replace the write/post on the irq reset with the helper. On enabling side, posting doesn't serve any purpose so it can also be replaced with helper. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-3-mika.kuoppala@linux.intel.com
-
Mika Kuoppala authored
All other master control register bits, except the enable, are read only and they are level indications of the second level interrupt status. Only touch enable bit and rectify the comment. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-2-mika.kuoppala@linux.intel.com
-
Mika Kuoppala authored
Disable master interrupt before reading level indications. This will close a race where we get a level indication between reading and disabling, generating an extra interrupt where we could have avoided one. Further, as the reading acts also as a post, replace the write/post on the irq reset with the helper. On enabling side, posting doesn't serve any purpose so it can also be replaced with helper. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 15 Oct, 2018 11 commits
-
-
Mahesh Kumar authored
Enable SAGV for ICL platform. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
-
Chris Wilson authored
Since we peek into HW state and poke around, it behoves us to acquire a runtime pm wakeref beforehand. References: https://bugs.freedesktop.org/show_bug.cgi?id=108343 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108364Signed-off-by:
-
Shashank Sharma authored
LSPCON chips can generate YCBCR outputs, if asked nicely :). In order to generate YCBCR 4:2:0 outputs, a source must: - send YCBCR 4:4:4 signals to LSPCON - program color space as 4:2:0 in AVI infoframes Whereas for YCBCR 4:4:4 outputs, the source must: - send YCBCR 4:4:4 signals to LSPCON - program color space as 4:4:4 in AVI infoframes So for both 4:2:0 as well as 4:4:4 outputs, we are driving the pipe for YCBCR 4:4:4 output, but AVI infoframe's color space information indicates LSPCON FW to start scaling down from YCBCR 4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by LSPCON device, we need not to reserve a scaler for 4:2:0 outputs. V2: rebase V3: Addressed review comments from Ville - add enum crtc_output_format instead of bool ycbcr420 - use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output cases in this way we will have YCBCR 4:4:4 framework ready (except the ABI part) V4: Added r-b from Maarten (for v3) Addressed review comments from Ville: - Do not add a non-atomic state variable to determine lspcon output. Instead add bool in CRTC state to indicate lspcon based scaling. V5: Addressed review comments from Ville: - Change the state bool name from external scaling to something more relavent. - Keep the info and adjusted_mode structures const. - use crtc_state instead of pipe_config. - Push all the config change into lspcon_ycbcr420_config function. V6: Rebase, small changes to accommodate changes in patch 2. V7: Fixed checkpatch warnings for alignment V8: Rebase PS: Ignored following warnings to match the current formatting: drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON -:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721: +#define TRANS_MSA_SAMPLING_444 (2<<1) ^ -:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV) #54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722: +#define TRANS_MSA_CLRSP_YCBCR (2<<3) V9: Rebase V10: Rebase V11: Rebase Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-8-git-send-email-shashank.sharma@intel.com
-
Shashank Sharma authored
Different LSPCON vendors specify their custom methods to pass AVI infoframes to the LSPCON chip, so does Parade tech. This patch adds functions to arrange and write AVI infoframes into Parade LSPCON chips. V2: rebase V3: Added r-b from Maarten V4: rebase V5: rebase V6: rebase V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Shashank Sharma authored
LSPCON is a DP branch device, so LSPCON vendors define specific methods to pass AVI infoframes to the the chip. This patch adds: - a generic wrapper function for writing AVI infoframes for all LSPCON devices. - a vendor specific function to wrire AVI infoframes into MCA LSPCON devices. V2: Rebase V3: Added r-b from Maarten V4: Rebase V5: Rebase V6: Rebase V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Added the retry logic, with 50ms incremental delays while writing AVI IF V10: Changed the return value check V11: Fixed checkpatch warning V12: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
In order to pass AVI infoframes to LSPCON devices, a source has to write them in a vendor recommended method and location. This patch series: - adds generic LSPCON infoframe setup functions. - registers these functions into existing AVI infoframe framework. - triggers these functions from modeset sequence. Next patches in the series will add vendor specific code. V2: Added new parameter to align with new definition of drm_hdmi_avi_infoframe_quant_range V3: Added r-b from Maarten (for V2) Added new parameter output_format in struct lspcon to accommodate Ville's review comments on last patch of the series V4: Addressed Ville's review comment - Do not add output_format in LSPCON state, as its non-atomic. Add this into CRTC state (added in a later patch). V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase V11: Accommodated rebasing changes in intel_git_port fptrs (set_infoframes and infoframe_enabled) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
Intel LSPCON chip is provided by 2 vendors: - Megachips America (MCA) - Parade technologies (Parade tech) Its important to know the vendor of this chip, as the address to write AVI infoframes is different for those two. This patch reads the vendor OUI signature, and marks into LSPCON encoder structure for future usages. This patch also does a small re-arrangement of the code, by moving lspcon mode change into probe function. V2: Use dp->desc for OUI detection, dont add a helper for this (Ville) V3: Rebase, Added r-b from Maarten V4: Rebase V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
This patch adds support for YCBCR 4:4:4 CRTC output format. To do this, this patch extends the existing YCBCR 4:2:0 framework by: - Adding new parameter in for YCBCR 4:4:4 enum crtc_iutput_format. - Adding case for YCBCR 4:4:4 in while setting AVI infoframes. - Adding necessary checks in modeset sequence. V3: Added this patch in the series V4: Added r-b from Maarten (for v3) Addressed review comment from Ville: Do not use (config->output_format > CRTC_OUTPUT_RGB) V5: Rebase V6: Rebase and small change, to accommodate changes in patch 2 V7: Fixed checkpatch alignment warnings V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comment from Ville Missing output_format_str[INTEL_OUTPUT_FORMAT_YCBCR444] Added Ville's R-B. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Shashank Sharma authored
Currently, we are using a bool in CRTC state (state->ycbcr420), to indicate modeset, that the output format is YCBCR 4:2:0. Now in order to support other YCBCR formats, we will need more such flags. This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the CRTC output formats and then plugs it during the modeset. V3: Added this patch in the series, to address review comments from second patchset. V4: Added r-b from Maarten (on v3) Addressed review comments from Ville: - Change the enum name to intel_output_format. - Start the enum value (INVALID) from 0 instaed of 1. - Set the crtc's output_format to RGB in encoder's compute_config. V5: Broke previous patch 1 into two parts, - first patch to add CRTC output format in general - second patch (this one) to add YCBCR 4:2:0 output format specifically. - Use ARRAY_SIZE(format_str) for output format validity check (Ville) V6: Added a separate function to calculate crtc_state->output_format, and calling it from various get_config function (Fix CI build warning) V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comments from Ville: - Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE. - Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary. - No need to get CRTC YCBCR config, for pre-BDW functions. Added Ville's r-b. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: -
Shashank Sharma authored
This patch adds an enum "intel_output_format" to represent the output format of a particular CRTC. This enum will be used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format during the atomic modeset calculations. V5: - Created this separate patch to introduce and init output_format. - Initialize parameters of output_format_str respectively (Jani N). - Call it intel_output_format than crtc_output_format(Ville). - Set output format in pipe_config for every encoder (Ville). - Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville) V6: Rebase V7: Fixed alignment warnings (checkpatch) V8: Another check[atch warning for alignment V9: Rebase V10: Rebase on top of DSI restructure V11: Addressed review comment from Ville - Set CRTC format for pre-HSW get_pipe_config() function too. Added Ville's R-B Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: -
Chris Wilson authored
Handle integer overflow when computing the sub-page length for shmem backed pread/pwrite. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
- 12 Oct, 2018 1 commit
-
-
Jyoti Yadav authored
DC5 and DC6 counter register tells about residency of DC5 and DC6. Added the same in debugfs file. v2 : Remove csr_version check. Added generic check regarding DC counters for Gen9 onwards. (Rodrigo) v3 : Simplified gen checks. (Chris) v4 : Simplified "if" ladder for multiple gens. v5 : Removed unnecessary comment. Signed-off-by:Jyoti Yadav <jyoti.r.yadav@intel.com> Reviewed-by:
-
- 11 Oct, 2018 10 commits
-
-
Paulo Zanoni authored
This message is currently marked as DRM_DEBUG_ATOMIC. I would like it to be DRM_DEBUG_KMS since it is more KMS than atomic, and this will also make the message appear in the CI logs, which may or may not help us with some FIFO underrun bugs. Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Paulo Zanoni authored
We were writing to PLANE_BUF_CFG(pipe, plane_id) twice for every platform, and we were even using different values on the gen10- planar case. The first write is useless since it just gets replaced with the next one, so kill it. There's a lot to improve in the DDB code, but let's start by avoiding the double write. Reviewed-by:
-
Paulo Zanoni authored
The transition watermarks ask for Selected Result Blocks (the real value), not Result Blocks (the integer value). Given how ceilings are applied in both the non-transition and the transition watermarks calculations, we can get away with assuming that Selected Result Blocks is actually Result Blocks minus 1 without any rounding errors. Reviewed-by:
-
Paulo Zanoni authored
On these platforms we're supposed to unconditonally pick the method 2 result instead of the minimum. Reviewed-by:
-
Paulo Zanoni authored
The transition minimum is 14 blocks for gens 9 and 10, and 4 blocks for gen 11. This minimum value is supposed to be added to the configurable trans_amount. This matches both BSpec and additional information provided by our HW engineers. Reviewed-by:
-
Paulo Zanoni authored
Function intel_framebuffer_init() checks for the possibilities during framebuffer creation (addfb ioctl time). It is missing the fact that the indexed format is not supported with Yf tiling. It is worth noticing that skl_plane_format_mod_supported() correctly handles for the C8/Yf combination, but this function runs during modeset time, so we only reject the combination later. Ville recently proposed a new IGT test that only uses addfb to assert supported formats, so that IGT was failing. Add the check so we get green squares right from the start after Ville merges his test. Also drive-by fix the missing /* fall through */ in the chunk we modified by just turning it into a "break;" since IMHO breaks are easier to read than fall-throughs. BSpec: 18565 Testcase: igt/kms_addfb_basic/expected-formats (not merged yet) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Michal Wajdeczko authored
We need extra load failure point to better test error path in i915_driver_init_mmio. Suggested-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Michal Wajdeczko authored
In case of the error we missed to call i915_mmio_cleanup that matches earlier call to i915_mmio_setup. Signed-off-by:
-
José Roberto de Souza authored
This new AML PCI ID uses the same gen graphics as Coffe Lake not a Kaby Lake one like the other AMLs. So to make it more explicit renaming INTEL_AML_GT2_IDS to INTEL_AML_KBL_GT2_IDS and naming this id as INTEL_AML_CFL_GT2_IDS. v2: - missed add new AML macro to INTEL_CFL_IDS() - added derivated platform initials to AML macros Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Chris Wilson authored
For mmap-exhaustion, we deliberately put the system under a large amount of pressure to ensure that we are able to reap mmap-offsets from dead objects. If background activity does that reaping for us, that defeats the purpose of the test and in some cases will fail our sanity checks (because of the fake activity we use to prevent the idle worker). Fixes: 932cac10 ("drm/i915/selftests: Prevent background reaping of acti ve objects") Signed-off-by:
-
- 10 Oct, 2018 6 commits
-
-
Lyude Paul authored
As mentioned in the previous commit, we currently prevent new modesets on recently-removed MST connectors by returning no encoder from our ->best_encoder() callback once the MST port has disappeared. This is wrong however, because it prevents legacy modesetting users from being able to disable CRTCs on MST connectors after the connector's respective topology has disappeared. So, fix this by instead by just always returning a valid encoder. Changes since v2: - Remove usage of atomic MST helper for now, since that got replaced with a much simpler solution Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com
-
Lyude Paul authored
It appears when testing my previous fix for some of the legacy modesetting issues with MST, I misattributed some kernel splats that started appearing on my machine after a rebase as being from upstream. But it appears they actually came from my patch series: [ 2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1] [ 2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered [ 2.980516] ------------[ cut here ]------------ [ 2.980519] Could not determine valid watermarks for inherited state [ 2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915] [ 2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd [ 2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G O 4.19.0-rc7Lyude-Test+ #1 [ 2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016 [ 2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915] [ 2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00 [ 2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282 [ 2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006 [ 2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0 [ 2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065 [ 2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000 [ 2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800 [ 2.980630] FS: 00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000 [ 2.980633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0 [ 2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2.980645] Call Trace: [ 2.980675] i915_driver_load+0xb0e/0xdc0 [i915] [ 2.980681] ? kernfs_add_one+0xe7/0x130 [ 2.980709] i915_pci_probe+0x46/0x60 [i915] [ 2.980715] pci_device_probe+0xd4/0x150 [ 2.980719] really_probe+0x243/0x3b0 [ 2.980722] driver_probe_device+0xba/0x100 [ 2.980726] __driver_attach+0xe4/0x110 [ 2.980729] ? driver_probe_device+0x100/0x100 [ 2.980733] bus_for_each_dev+0x74/0xb0 [ 2.980736] driver_attach+0x1e/0x20 [ 2.980739] bus_add_driver+0x159/0x230 [ 2.980743] ? 0xffffffffa0393000 [ 2.980746] driver_register+0x70/0xc0 [ 2.980749] ? 0xffffffffa0393000 [ 2.980753] __pci_register_driver+0x57/0x60 [ 2.980780] i915_init+0x55/0x58 [i915] [ 2.980785] do_one_initcall+0x4a/0x1c4 [ 2.980789] ? do_init_module+0x27/0x210 [ 2.980793] ? kmem_cache_alloc_trace+0x131/0x190 [ 2.980797] do_init_module+0x60/0x210 [ 2.980800] load_module+0x2063/0x22e0 [ 2.980804] ? vfs_read+0x116/0x140 [ 2.980807] ? vfs_read+0x116/0x140 [ 2.980811] __do_sys_finit_module+0xbd/0x120 [ 2.980814] ? __do_sys_finit_module+0xbd/0x120 [ 2.980818] __x64_sys_finit_module+0x1a/0x20 [ 2.980821] do_syscall_64+0x5a/0x110 [ 2.980824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2.980826] RIP: 0033:0x7f4754e32879 [ 2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48 [ 2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879 [ 2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018 [ 2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000 [ 2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000 [ 2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000 [ 2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915] [ 2.980884] ---[ end trace 5eb47a76277d4731 ]--- The cause of this appears to be due to the fact that if there's pre-existing display state that was set by the BIOS when i915 loads, it will attempt to perform a modeset before the driver is registered with userspace. Since this happens before the driver's registered with userspace, it's connectors are also unregistered and thus-states which would turn on DPMS on a connector end up getting rejected since the connector isn't registered. These bugs managed to get past Intel's CI partially due to the fact it never ran a full test on my patches for some reason, but also because all of the tests unload the GPU once before running. Since this bug is only really triggered when the drivers tries to perform a modeset before it's been fully registered with userspace when coming from whatever display configuration the firmware left us with, it likely would never have been picked up by CI in the first place. After some discussion with vsyrjala, we decided the best course of action would be to just move the unregistered connector checks out of update_connector_routing() and into drm_atomic_set_crtc_for_connector(). The reason for this being that legacy modesetting isn't going to be expecting failures anywhere (at least this is the case with X), so ideally we want to ensure that any DPMS changes will still work even on unregistered connectors. Instead, we now only reject new modesets which would change the current CRTC assigned to an unregistered connector unless no new CRTC is being assigned to replace the connector's previous one. Signed-off-by:
-
Chris Wilson authored
Check we can handle a late display load failure where the final act of registering the connector fails. Signed-off-by:
Jani Nikula <jani.nikula@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181010123833.16797-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Now that we have intel_connector.c, move the connector specific functions from intel_display.c there. Fix a few checkpatch complaints while at it. No functional changes. Reviewed-by:
-
Jani Nikula authored
The common denominator here seems to be connector more than modes. Prepare for moving more connector functions to the same place. No functional changes. Reviewed-by:
-
Jani Nikula authored
For a while we carried lvds connector specific data in the lvds connector, but since commit 05c72e77 ("drm/i915: Nuke the LVDS lid notifier") we haven't needed it. Revert back to plain intel_connector. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
