- 04 Jun, 2015 7 commits
-
-
Chuck Lever authored
Bi-directional RPC support means code in svcrdma.ko invokes a bit of code in xprtrdma.ko, and vice versa. To avoid loader/linker loops, merge the server and client side modules together into a single module. When backchannel capabilities are added, the combined module will register all needed transport capabilities so that Upper Layer consumers automatically have everything needed to create a bi-directional transport connection. Module aliases are added for backwards compatibility with user space, which still may expect svcrdma.ko or xprtrdma.ko to be present. This commit reverts commit 2e8c12e1 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support") and provides a single CONFIG option for enabling the new module. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
Chuck Lever authored
The server and client maximum are architecturally independent. Allow changing one without affecting the other. Signed-off-by:
-
Chuck Lever authored
At the 2015 LSF/MM, it was requested that memory allocation call sites that request GFP_KERNEL allocations in a loop should be annotated with __GFP_NOFAIL. Signed-off-by:
-
Chuck Lever authored
Fields in struct rpcrdma_msg are __be32. Don't byte-swap these fields when decoding RPC calls and then swap them back for the reply. For the most part, they can be left alone. Signed-off-by:
-
Chuck Lever authored
In send_write_chunks(), we have: for (xdr_off = rqstp->rq_res.head[0].iov_len, chunk_no = 0; xfer_len && chunk_no < arg_ary->wc_nchunks; chunk_no++) { . . . } Note that arg_ary->wc_nchunk is in network byte-order. For the comparison to work correctly, both have to be in native byte-order. In send_reply_chunks, we have: write_len = min(xfer_len, htonl(ch->rs_length)); xfer_len is in native byte-order, and ch->rs_length is in network byte-order. be32_to_cpu() is the correct byte swap for ch->rs_length. As an additional clean up, replace ntohl() with be32_to_cpu() in a few other places. This appears to address a problem with large rsize hangs while using PHYSICAL memory registration. I suspect that is the only registration mode that uses more than one chunk element. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=248Signed-off-by: -
Kinglong Mee authored
When testing pnfs layout, nfsd got error NFS4ERR_SEQ_MISORDERED. It is caused by nfs return NFS4ERR_DELAY before validate_seqid(), don't update the sequnce id, but nfsd updates the sequnce id !!! According to RFC5661 20.9.3, " If CB_SEQUENCE returns an error, then the state of the slot (sequence ID, cached reply) MUST NOT change. " Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Kinglong Mee authored
nfsd enters a infinite loop and prints message every 10 seconds: May 31 18:33:52 test-server kernel: Error sending entire callback! May 31 18:34:01 test-server kernel: Error sending entire callback! This is caused by a cb_layoutreturn getting error -10008 (NFS4ERR_DELAY), the client crashing, and then nfsd entering the infinite loop: bc_sendto --> call_timeout --> nfsd4_cb_done --> nfsd4_cb_layout_done with error -10008 --> rpc_delay(task, HZ/100) --> bc_sendto ... Reproduced using xfstests 074 with nfs client's kdump on, CONFIG_DEFAULT_HUNG_TASK_TIMEOUT set, and client's blkmapd down: 1. nfs client's write operation will get the layout of file, and then send getdeviceinfo, 2. but layout segment is not recorded by client because blkmapd is down, 3. client writes data by sending WRITE to server, 4. nfs server recalls the layout of the file before WRITE, 5. network error causes the client reset the session and return NFS4ERR_DELAY, 6. so client's WRITE operation is waiting the reply. If the task hangs 120s, the client will crash. 7. so that, the next bc_sendto will fail with TIMEOUT, and cb_status is NFS4ERR_DELAY. Signed-off-by:
-
- 03 Jun, 2015 2 commits
-
-
Chuck Lever authored
svc_rdma_xdr_decode_deferred_req() indexes an array with an un-byte-swapped value off the wire. Fortunately this function isn't used anywhere, so simply remove it. Signed-off-by:
-
Chuck Lever authored
Clean up. Signed-off-by:
-
- 01 Jun, 2015 1 commit
-
-
Andreas Gruenbacher authored
Add the ACL related protocol definitions which were added in the NFSv4.1 specification. (But we're not using them yet.) Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
- 29 May, 2015 4 commits
-
-
Andreas Gruenbacher authored
Signed-off-by:
-
Arnd Bergmann authored
gcc-5.0 warns about a potential uninitialized variable use in nfsd: fs/nfsd/nfs4state.c: In function 'nfsd4_process_open2': fs/nfsd/nfs4state.c:3781:3: warning: 'old_deny_bmap' may be used uninitialized in this function [-Wmaybe-uninitialized] reset_union_bmap_deny(old_deny_bmap, stp); ^ fs/nfsd/nfs4state.c:3760:16: note: 'old_deny_bmap' was declared here unsigned char old_deny_bmap; ^ This is a false positive, the code path that is warned about cannot actually be reached. This adds an initialization for the variable to make the warning go away. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Andreas Gruenbacher authored
Whether or not a file system supports acls can be determined with IS_POSIXACL(inode) and does not require trying to fetch any acls; the code for computing the supported_attrs and aclsupport attributes can be simplified. Signed-off-by:
-
Andreas Gruenbacher authored
NFSv2 can set the atime and/or mtime of a file to specific timestamps but not to the server's current time. To implement the equivalent of utimes("file", NULL), it uses a heuristic. NFSv3 and later do support setting the atime and/or mtime to the server's current time directly. The NFSv2 heuristic is still enabled, and causes timestamps to be set wrong sometimes. Fix this by moving the heuristic into the NFSv2 specific code. We can leave it out of the create code path: the owner can always set timestamps arbitrarily, and the workaround would never trigger. Signed-off-by:Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 07 May, 2015 1 commit
-
-
NeilBrown authored
The NFSv3 READDIRPLUS gets some of the returned attributes from the readdir, and some from an inode returned from a new lookup. The two objects could be different thanks to intervening renames. The attributes in READDIRPLUS are optional, so let's just skip them if we notice this case. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
- 04 May, 2015 12 commits
-
-
Scott Mayhew authored
The 'overloads-avoided' counter itself was removed several years ago by commit 78c210ef (Revert "knfsd: avoid overloading the CPU scheduler with enormous load averages"). Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
With sessions in v4.1 or later we don't need to manually probe the backchannel connection, so we can declare it up instantly after setting up the RPC client. Note that we really should split nfsd4_run_cb_work in the long run, this is just the least intrusive fix for now. Signed-off-by:
-
Christoph Hellwig authored
Checking the rpc_client pointer is not a reliable way to detect backchannel changes: cl_cb_client is changed only after shutting down the rpc client, so the condition cl_cb_client = tk_client will always be true. Check the RPC_TASK_KILLED flag instead, and rewrite the code to avoid the buggy cl_callbacks list and fix the lifetime rules due to double calls of the ->prepare callback operations method for this retry case. Signed-off-by:
-
Christoph Hellwig authored
We must only increment the sequence id if the client has seen and responded to a request. If we failed to deliver it to the client we must resend with the same sequence id. So just like the client track errors at the transport level differently from those returned in the XDR. Signed-off-by:
-
Scott Mayhew authored
In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by:
Simo Sorce <simo@redhat.com> Signed-off-by:
-
Sachin Bhamare authored
For the sake of forgetful clients, the server should return the layouts to the file system on 'last close' of a file (assuming that there are no delegations outstanding to that particular client) or on delegreturn (assuming that there are no opens on a file from that particular client). In theory the information is all there in current data structures, but it's not efficiently available; nfs4_file->fi_ref includes references on the file across all clients, but we need a per-(client, file) count. Walking through lots of stateid's to calculate this on each close or delegreturn would be painful. This patch introduces infrastructure to maintain per-client opens and delegation counters on a per-file basis. [hch: ported to the mainline pNFS support, merged various fixes from Jeff] Signed-off-by:
Sachin Bhamare <sachin.bhamare@primarydata.com> Signed-off-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
-
Christoph Hellwig authored
If we find a non-confirmed openowner we jump to exit the function, but do not set an error value. Fix this by factoring out a helper to do the check and properly set the error from nfsd4_validate_stateid. Cc: stable@vger.kernel.org Signed-off-by:
-
Christoph Hellwig authored
Commit df52699e ("NFSv4.1: Don't cache deviceids that have no notifications") causes the Linux NFS client to stop caching deviceid's unless a server pretends to support deviceid notifications. While this behavior is stupid and the language around this area in rfc5661 is a mess carified by an errata that I submittted, Trond insists on this behavior. Not caching deviceids degrades block layout performance massively as a GETDEVICEINFO is fairly expensive. So add this hack to make the Linux client happy again. Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Some miscellaneous bug fixes and some final on-disk and ABI changes for ext4 encryption which provide better security and performance" * tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix growing of tiny filesystems ext4: move check under lock scope to close a race. ext4: fix data corruption caused by unwritten and delayed extents ext4 crypto: remove duplicated encryption mode definitions ext4 crypto: do not select from EXT4_FS_ENCRYPTION ext4 crypto: add padding to filenames before encrypting ext4 crypto: simplify and speed up filename encryption
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "One intel fix, one rockchip fix, and a bunch of radeon fixes for some regressions from audio rework and vm stability" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915/chv: Implement WaDisableShadowRegForCpd drm/radeon: fix userptr return value checking (v2) drm/radeon: check new address before removing old one drm/radeon: reset BOs address after clearing it. drm/radeon: fix lockup when BOs aren't part of the VM on release drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5 drm/radeon: adjust pll when audio is not enabled drm/radeon: only enable audio streams if the monitor supports it drm/radeon: only mark audio as connected if the monitor supports it (v3) drm/radeon/audio: don't enable packets until the end drm/radeon: drop dce6_dp_enable drm/radeon: fix ordering of AVI packet setup drm/radeon: Use drm_calloc_ab for CS relocs drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
- 03 May, 2015 8 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Just a single intel fix * tag 'drm-intel-fixes-2015-04-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/chv: Implement WaDisableShadowRegForCpd
-
https://github.com/markyzq/kernel-drm-rockchipDave Airlie authored
one fix and maintainers update * 'drm-next0420' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: fix error check when getting irq MAINTAINERS: add entry for Rockchip drm drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is three logical fixes (as 5 patches). The 3ware class of drivers were causing an oops with multiqueue by tearing down the command mappings after completing the command (where the variables in the command used to tear down the mapping were no-longer valid). There's also a fix for the qnap iscsi target which was choking on us sending it commands that were too long and a fix for the reworked aha1542 allocating GFP_KERNEL under a lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: fix command completion race 3w-xxxx: fix command completion race 3w-sas: fix command completion race aha1542: Allocate memory before taking a lock SCSI: add 1024 max sectors black list flag
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave dmaengine fixes from Vinod Koul: "Here are the fixes in dmaengine subsystem for rc2: - privatecnt fix for slave dma request API by Christopher - warn fix for PM ifdef in usb-dmac by Geert - fix hardware dependency for xgene by Jean" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: increment privatecnt when using dma_get_any_slave_channel dmaengine: xgene: Set hardware dependency dmaengine: usb-dmac: Protect PM-only functions to kill warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
-
Jan Kara authored
The estimate of necessary transaction credits in ext4_flex_group_add() is too pessimistic. It reserves credit for sb, resize inode, and resize inode dindirect block for each group added in a flex group although they are always the same block and thus it is enough to account them only once. Also the number of modified GDT block is overestimated since we fit EXT4_DESC_PER_BLOCK(sb) descriptors in one block. Make the estimation more precise. That reduces number of requested credits enough that we can grow 20 MB filesystem (which has 1 MB journal, 79 reserved GDT blocks, and flex group size 16 by default). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Eric Sandeen <sandeen@redhat.com>
-
Davide Italiano authored
fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. Signed-off-by:
Davide Italiano <dccitaliano@gmail.com> Signed-off-by:
-
Lukas Czerner authored
Currently it is possible to lose whole file system block worth of data when we hit the specific interaction with unwritten and delayed extents in status extent tree. The problem is that when we insert delayed extent into extent status tree the only way to get rid of it is when we write out delayed buffer. However there is a limitation in the extent status tree implementation so that when inserting unwritten extent should there be even a single delayed block the whole unwritten extent would be marked as delayed. At this point, there is no way to get rid of the delayed extents, because there are no delayed buffers to write out. So when a we write into said unwritten extent we will convert it to written, but it still remains delayed. When we try to write into that block later ext4_da_map_blocks() will set the buffer new and delayed and map it to invalid block which causes the rest of the block to be zeroed loosing already written data. For now we can fix this by simply not allowing to set delayed status on written extent in the extent status tree. Also add WARN_ON() to make sure that we notice if this happens in the future. This problem can be easily reproduced by running the following xfs_io. xfs_io -f -c "pwrite -S 0xaa 4096 2048" \ -c "falloc 0 131072" \ -c "pwrite -S 0xbb 65536 2048" \ -c "fsync" /mnt/test/fff echo 3 > /proc/sys/vm/drop_caches xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff This can be theoretically also reproduced by at random by running fsx, but it's not very reliable, though on machines with bigger page size (like ppc) this can be seen more often (especially xfstest generic/127) Signed-off-by:Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
- 02 May, 2015 5 commits
-
-
Chanho Park authored
This patch removes duplicated encryption modes which were already in ext4.h. They were duplicated from commit 3edc18d8 and commit f542fb. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Michael Halcrow <mhalcrow@google.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by:
Chanho Park <chanho61.park@samsung.com> Signed-off-by:
-
Herbert Xu authored
This patch adds a tristate EXT4_ENCRYPTION to do the selections for EXT4_FS_ENCRYPTION because selecting from a bool causes all the selected options to be built-in, even if EXT4 itself is a module. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Receive packet length needs to be adjust by 2 on RX to accomodate the two padding bytes in altera_tse driver. From Vlastimil Setka. 2) If rx frame is dropped due to out of memory in macb driver, we leave the receive ring descriptors in an undefined state. From Punnaiah Choudary Kalluri 3) Some netlink subsystems erroneously signal NLM_F_MULTI. That is only for dumps. Fix from Nicolas Dichtel. 4) Fix mis-use of raw rt->rt_pmtu value in ipv4, one must always go via the ipv4_mtu() helper. From Herbert Xu. 5) Fix null deref in bridge netfilter, and miscalculated lengths in jump/goto nf_tables verdicts. From Florian Westphal. 6) Unhash ping sockets properly. 7) Software implementation of BPF divide did 64/32 rather than 64/64 bit divide. The JITs got it right. Fix from Alexei Starovoitov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (30 commits) ipv4: Missing sk_nulls_node_init() in ping_unhash(). net: fec: Fix RGMII-ID mode net/mlx4_en: Schedule napi when RX buffers allocation fails netxen_nic: use spin_[un]lock_bh around tx_clean_lock net/mlx4_core: Fix unaligned accesses mlx4_en: Use correct loop cursor in error path. cxgb4: Fix MC1 memory offset calculation bnx2x: Delay during kdump load net: Fix Kernel Panic in bonding driver debugfs file: rlb_hash_table net: dsa: Fix scope of eeprom-length property net: macb: Fix race condition in driver when Rx frame is dropped hv_netvsc: Fix a bug in netvsc_start_xmit() altera_tse: Correct rx packet length mlx4: Fix tx ring affinity_mask creation tipc: fix problem with parallel link synchronization mechanism tipc: remove wrong use of NLM_F_MULTI bridge/nl: remove wrong use of NLM_F_MULTI bridge/mdb: remove wrong use of NLM_F_MULTI net: sched: act_connmark: don't zap skb->nfct trivial: net: systemport: bcmsysport.h: fix 0x0x prefix ... -
Stefan Hajnoczi authored
Here the "other side" refers to the guest or host. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rusty Russell authored
With my job change kernel work will be "own time"; I'm keeping lguest and modules (and the virtio standards work), but virtio kernel has to go. This makes it clear that Michael is in charge. He's good, but having me watch over his shoulder won't help. Good luck Michael! Signed-off-by:
-
