- 05 Oct, 2014 40 commits
-
-
Rafael J. Wysocki authored
commit 8ab17fc9 upstream. Commit 46394fd0 (ACPI / hotplug: Move container-specific code out of the core) removed the generation of "online" uevents for containers, because "add" uevents are now generated for them automatically when container system devices are registered. However, there are user space tools that need to be notified when the container and all of its children have been enumerated, which doesn't happen any more. For this reason, add a mechanism allowing "online" uevents to be generated for ACPI containers after enumerating the container along with all of its children. Fixes: 46394fd0 (ACPI / hotplug: Move container-specific code out of the core) Reported-and-tested-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fu Zhonghui authored
commit 45792081 upstream. On some systems (Asus T100 in particular) there are strict ordering dependencies between LPSS devices with respect to power management that break if they suspend/resume asynchronously. In theory it should be possible to follow those dependencies in the async suspend/resume case too (the ACPI tables tell as that the dependencies are there), but since we're missing infrastructure for that at the moment, disable async suspend/resume for all of the LPSS devices for the time being. Link: http://marc.info/?l=linux-acpi&m=141158962321905&w=2 Fixes: 8ce62f85 (ACPI / platform / LPSS: Enable async suspend/resume of LPSS devices) Signed-off-by:
Li Aubrey <aubrey.li@linux.intel.com> Signed-off-by:
Fu Zhonghui <zhonghui.fu@linux.intel.com> [ rjw: Changelog ] Signed-off-by:
-
Srinivas Pandruvada authored
commit c15d821d upstream. Fix code when the operation region callback is for an gpio, which is not at index 0 and for partial pins in a GPIO definition. For example: Name (GMOD, ResourceTemplate () { //3 Outputs that define the Power mode of the device GpioIo (Exclusive, PullDown, , , , "\\_SB.GPI2") {10, 11, 12} }) } If opregion callback calls is for: - Set pin 10, then address = 0 and bit length = 1 - Set pin 11, then address = 1 and bit length = 1 - Set for both pin 11 and pin 12, then address = 1, bit length = 2 This change requires updated ACPICA gpio operation handler code to send the pin index and bit length. Fixes: 473ed7be (gpio / ACPI: Add support for ACPI GPIO operation regions) Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Bob Moore authored
commit 75ec6e55 upstream. Changes to correct several GPIO issues: 1) The update_rule in a GPIO field definition is now ignored; a read-modify-write operation is never performed for GPIO fields. (Internally, this means that the field assembly/disassembly code is completely bypassed for GPIO.) 2) The Address parameter passed to a GPIO region handler is now the bit offset of the field from a previous Connection() operator. Thus, it becomes a "Pin Number Index" into the Connection() resource descriptor. 3) The bit_width parameter passed to a GPIO region handler is now the exact bit width of the GPIO field. Thus, it can be interpreted as "number of pins". Overall, we can now say that the region handler interface to GPIO handlers is a raw "bit/pin" addressed interface, not a byte-addressed interface like the system_memory handler interface. Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
-
Markos Chandras authored
commit 8a574cfa upstream. Every mcount() call in the MIPS 32-bit kernel is done as follows: [...] move at, ra jal _mcount addiu sp, sp, -8 [...] but upon returning from the mcount() function, the stack pointer is not adjusted properly. This is explained in details in 58b69401 (MIPS: Function tracer: Fix broken function tracing). Commit ad8c3969 ("MIPS: Unbreak function tracer for 64-bit kernel.) fixed the stack manipulation for 64-bit but it didn't fix it completely for MIPS32. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7792/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
commit c8c0da6b upstream. Commit bbd426f5 "MIPS: Simplify FP context access" modified the SIFROMREG & SIFROMHREG macros such that they return unsigned rather than signed 32b integers. I had believed that to be fine, but inadvertently missed the MFC1 & MFHC1 cases which write to a struct pt_regs regs element. On MIPS32 this is fine, but on 64 bit those saved regs' fields are 64 bit wide. Using unsigned values caused the 32 bit value from the FP register to be zero rather than sign extended as the architecture specifies, causing incorrect emulation of the MFC1 & MFHc1 instructions. Fix by reintroducing the casts to signed integers, and therefore the sign extension. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7848/Signed-off-by:
-
Aurelien Jarno authored
commit 29593fd5 upstream. Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c) moved the string related functions into a separate file, which might cause the following build error, depending on the configuration: | CC arch/mips/boot/compressed/decompress.o | In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0, | from linux/arch/mips/boot/compressed/decompress.c:67: | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp': | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] | cc1: some warnings being treated as errors | linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed | make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1 | linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed It does not fail with the standard configuration, as when CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in include/linux/dynamic_debug.h. There might be other ways for it to get indirectly included. We can't add the include directly in xz_dec_stream.c as some architectures might want to use a different version for the boot/ directory (see for example arch/x86/boot/string.h). Signed-off-by:
Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7420/Signed-off-by:
-
Nathan Lynch authored
commit 9cc6d9e5 upstream. Joachim Eastwood reports that commit fbfb872f "ARM: 8148/1: flush TLS and thumbee register state during exec" causes a boot-time crash on a Cortex-M4 nommu system: Freeing unused kernel memory: 68K (281e5000 - 281f6000) Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191 task: 29834000 ti: 29832000 task.ti: 29832000 PC is at flush_thread+0x2e/0x40 LR is at flush_thread+0x21/0x40 pc : [<2800954a>] lr : [<2800953d>] psr: 4100000b sp : 29833d60 ip : 00000000 fp : 00000001 r10: 00003cf8 r9 : 29b1f000 r8 : 00000000 r7 : 29b0bc00 r6 : 29834000 r5 : 29832000 r4 : 29832000 r3 : ffff0ff0 r2 : 29832000 r1 : 00000000 r0 : 282121f0 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191 [<2800afa5>] (unwind_backtrace) from [<2800a327>] (show_stack+0xb/0xc) [<2800a327>] (show_stack) from [<2800a963>] (__invalid_entry+0x4b/0x4c) The problem is that set_tls is attempting to clear the TLS location in the kernel-user helper page, which isn't set up on V7M. Fix this by guarding the write to the kuser helper page with a CONFIG_KUSER_HELPERS ifdef. Fixes: fbfb872f ARM: 8148/1: flush TLS and thumbee register state during exec Reported-by:
Joachim Eastwood <manabian@gmail.com> Tested-by:
Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Robin Murphy authored
commit 5ca918e5 upstream. The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by:
Simon Hosie <simon.hosie@arm.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Shawn Guo authored
commit 9e1ac462 upstream. Commit 63288b72 ("ARM: imx: fix shared gate clock") attempted to fix an issue with particular enable/disable sequence from two shared gate clocks. But unfortunately, while it partially fixed the issue, it also did something wrong in .is_enabled() function hook. In case of shared gate, the function shouldn't really query the hardware state via share_count, because the function is trying to query the enabling state of the clock in question, not the hardware state which is shared by multiple clocks. Fix the issue by returning the enable_count of the clock itself which is maintained by clock core, in case it's a clock sharing hardware gate with others. As the result, the initialization of share_count per hardware state is not needed now. So remove it. Reported-by:
Fabio Estevam <fabio.estevam@freescale.com> Fixes: 63288b72 ("ARM: imx: fix shared gate clock") Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Tested-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Markus Niebel authored
commit 1b134c9c upstream. using LVDS channel 1 on an i.MX53 leads to following error: imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1 This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for reparenting di1 clock to ldb_di1. The value of the mux param comes from device tree port settings. On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations, only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1], respectively) Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Markus Niebel <Markus.Niebel@tq-group.com> Fixes: e05c8c9a ("ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi") Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Roger Quadros authored
commit 5990047c upstream. The nand timings were scaled down by 2 to account for the 2x rate returned by clk_get_rate(gpmc_fclk). As the clock data got fixed by [1], revert back to actual timings (i.e. scale them up by 2). Without this NAND doesn't work on dra7-evm. [1] - commit dd94324b ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Fixes: ff66a3c8 ("ARM: dts: dra7: add support for parallel NAND flash") Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Stephen Boyd authored
commit 505013bc upstream. Rob Clark reports a sleeping while atomic bug when using perf. BUG: sleeping function called from invalid context at ../kernel/locking/mutex.c:583 in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/0 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4828 at ../kernel/locking/mutex.c:479 mutex_lock_nested+0x3a0/0x3e8() DEBUG_LOCKS_WARN_ON(in_interrupt()) Modules linked in: CPU: 2 PID: 4828 Comm: Xorg.bin Tainted: G W 3.17.0-rc3-00234-gd535c45-dirty #819 [<c0216690>] (unwind_backtrace) from [<c0212174>] (show_stack+0x10/0x14) [<c0212174>] (show_stack) from [<c0867cc0>] (dump_stack+0x98/0xb8) [<c0867cc0>] (dump_stack) from [<c02492a4>] (warn_slowpath_common+0x70/0x8c) [<c02492a4>] (warn_slowpath_common) from [<c02492f0>] (warn_slowpath_fmt+0x30/0x40) [<c02492f0>] (warn_slowpath_fmt) from [<c086a3f8>] (mutex_lock_nested+0x3a0/0x3e8) [<c086a3f8>] (mutex_lock_nested) from [<c0294d08>] (irq_find_host+0x20/0x9c) [<c0294d08>] (irq_find_host) from [<c0769d50>] (of_irq_get+0x28/0x48) [<c0769d50>] (of_irq_get) from [<c057d104>] (platform_get_irq+0x1c/0x8c) [<c057d104>] (platform_get_irq) from [<c021a06c>] (cpu_pmu_enable_percpu_irq+0x14/0x38) [<c021a06c>] (cpu_pmu_enable_percpu_irq) from [<c02b1634>] (flush_smp_call_function_queue+0x88/0x178) [<c02b1634>] (flush_smp_call_function_queue) from [<c0214dc0>] (handle_IPI+0x88/0x160) [<c0214dc0>] (handle_IPI) from [<c0208930>] (gic_handle_irq+0x64/0x68) [<c0208930>] (gic_handle_irq) from [<c0212d04>] (__irq_svc+0x44/0x5c) Exception stack(0xe63ddea0 to 0xe63ddee8) dea0: 00000001 00000001 00000000 c2f3b200 c16db380 c032d4a0 e63ddf40 60010013 dec0: 00000000 001fbfd4 00000100 00000000 00000001 e63ddee8 c0284770 c02a2e30 dee0: 20010013 ffffffff [<c0212d04>] (__irq_svc) from [<c02a2e30>] (ktime_get_ts64+0x1c8/0x200) [<c02a2e30>] (ktime_get_ts64) from [<c032d4a0>] (poll_select_set_timeout+0x60/0xa8) [<c032d4a0>] (poll_select_set_timeout) from [<c032df64>] (SyS_select+0xa8/0x118) [<c032df64>] (SyS_select) from [<c020e8e0>] (ret_fast_syscall+0x0/0x48) ---[ end trace 0bb583b46342da6f ]--- INFO: lockdep is turned off. We don't really need to get the platform irq again when we're enabling or disabling the per-cpu irq. Furthermore, we don't really need to set and clear bits in the active_irqs bitmask because that's only used in the non-percpu irq case to figure out when the last CPU PMU has been disabled. Just pass the irq directly to the enable/disable functions to clean all this up. This should be slightly more efficient and also fix the scheduling while atomic bug. Fixes: bbd64559 "ARM: perf: support percpu irqs for the CPU PMU" Reported-by:
Rob Clark <robdclark@gmail.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Nathan Lynch authored
commit fbfb872f upstream. The TPIDRURO and TPIDRURW registers need to be flushed during exec; otherwise TLS information is potentially leaked. TPIDRURO in particular needs careful treatment. Since flush_thread basically needs the same code used to set the TLS in arm_syscall, pull that into a common set_tls helper in tls.h and use it in both places. Similarly, TEEHBR needs to be cleared during exec as well. Clearing its save slot in thread_info isn't right as there is no guarantee that a thread switch will occur before the new program runs. Just setting the register directly is sufficient. Signed-off-by:
-
Sudeep Holla authored
commit a040803a upstream. Since commit 1dbfa187 ("ARM: irq migration: force migration off CPU going down") the ARM interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. At the point of this change the argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de6 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the ARM cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validataion against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Tested on TC2 hotpluging CPU0 in and out. Without this patch the system locks up as the IRQs are not migrated away from CPU0. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Nishanth Menon authored
commit 68e4d9e5 upstream. While auditing the various pin ctrl configurations using the following command: grep PIN_ arch/arm/boot/dts/dra7-evm.dts|(while read line; do v=`echo "$line" | sed -e "s/\s\s*/|/g" | cut -d '|' -f1 | cut -d 'x' -f2|tr [a-z] [A-Z]`; HEX=`echo "obase=16;ibase=16;4A003400+$v"| bc`; echo "$HEX ===> $line"; done) against DRA75x/74x NDA TRM revision S(SPRUHI2S August 2014), documentation errors were found for spi1 pinctrl. Fix the same. Fixes: 6e58b8f1 ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board") Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
commit 929a015b upstream. The edma_setup_from_hw() should know about the CC number when parsing the CCCFG register - when it reads the register to be precise. The base addresses for CCs stored in an array and we need to provide the correct id to edma_read() in order to read the correct register. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Nishanth Menon authored
commit e49d519c upstream. GPIO modules are also interrupt sources. However, they require both the GPIO number and IRQ type to function properly. By declaring that GPIO uses interrupt-cells=<1>, we essentially do not allow users of the nodes to use the interrupt property appropritely. With this change, the following now works: interrupt-parent = <&gpio6>; interrupts = <5 IRQ_TYPE_LEVEL_LOW>; Fixes: 6e58b8f1 ('ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board') Signed-off-by:
-
Rajendra Nayak authored
commit f7f7a29b upstream. To deal with IPs which are specific to dra74x and dra72x, maintain seperate ocp interface lists, while keeping the common list for all common IPs. Move USB OTG SS4 to dra74x only list since its unavailable in dra72x and is giving an abort during boot. The dra72x only list is empty for now and a placeholder for future hwmod additions which are specific to dra72x. Fixes: d904b38d ("ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss") Reported-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Rajendra Nayak <rnayak@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Tested-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Fabio Estevam authored
commit 090727b8 upstream. The following error is seen after a suspend/resume cycle on a mx53qsb with a MC34708 PMIC: root@freescale /$ echo mem > /sys/power/state [ 32.630592] PM: Syncing filesystems ... done. [ 32.643924] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 32.652384] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 32.679156] PM: suspend of devices complete after 13.113 msecs [ 32.685128] PM: suspend devices took 0.030 seconds [ 32.696109] PM: late suspend of devices complete after 6.133 msecs [ 33.313032] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 33.322009] PM: noirq suspend of devices complete after 619.667 msecs [ 33.328544] Disabling non-boot CPUs ... [ 33.335031] PM: noirq resume of devices complete after 2.352 msecs [ 33.842940] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 33.976095] [sched_delayed] sched: RT throttling activated [ 33.984804] PM: early resume of devices complete after 642.642 msecs [ 34.352954] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 34.862910] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 34.996595] PM: resume of devices complete after 1005.367 msecs [ 35.372925] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 35.882911] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 35.955707] PM: resume devices took 1.970 seconds [ 35.960445] Restarting tasks ... done. [ 35.993386] fec 63fec000.ethernet eth0: Link is Down [ 36.392980] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 36.902908] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 36.953036] ata1: SATA link down (SStatus 0 SControl 300) [ 37.412922] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 37.922906] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 37.993379] fec 63fec000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 38.432938] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 38.942920] mc13xxx 0-0008: Failed to read IRQ status: -110 [ 39.452933] mc13xxx 0-0008: Failed to read IRQ status: -110 (flood of this error message continues forever) Commit 5169df8b ("ARM: dts: i.MX53: add support for MCIMX53-START-R") missed to configure the IOMUX for the PMIC IRQ pin. Configure the PMIC IRQ pin so that the suspend/resume sequence behaves cleanly as expected. Signed-off-by:
-
Mark Rutland authored
commit 2c32c65e upstream. On revisions of Cortex-A15 prior to r3p3, a CLREX instruction at PL1 may falsely trigger a watchpoint exception, leading to potential data aborts during exception return and/or livelock. This patch resolves the issue in the following ways: - Replacing our uses of CLREX with a dummy STREX sequence instead (as we did for v6 CPUs). - Removing the clrex code from v7_exit_coherency_flush and derivatives, since this only exists as a minor performance improvement when non-cached exclusives are in use (Linux doesn't use these). Benchmarking on a variety of ARM cores revealed no measurable performance difference with this change applied, so the change is performed unconditionally and no new Kconfig entry is added. Signed-off-by:
-
Mark Rutland authored
commit 85868313 upstream. The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors upon entry to the kernel, but this is redundant: - We clear the monitors on every exception return since commit 200b812d ("Clear the exclusive monitor when returning from an exception"), so this is not necessary to ensure the monitors are cleared before returning from a fault handler. - Any dummy STREX will target a temporary scratch area in memory, and may succeed or fail without corrupting useful data. Its status value will not be used. - Any other STREX in the kernel must be preceded by an LDREX, which will initialise the monitors consistently and will not depend on the earlier state of the monitors. Therefore we have no reason to care about the initial state of the exclusive monitors when a data abort is taken, and clearing the monitors prior to exception return (as we already do) is sufficient. This patch removes the redundant clearing of the exclusive monitors from the early abort handlers. Signed-off-by:
-
Andy Shevchenko authored
commit c9d5d6fe upstream. The commit 04f421e7 "spi: dw: use managed resources" changes drivers to use managed functions, but seems wasn't properly tested in PCI case. The regs field of struct dw_spi left uninitialized. Thus, kernel crashes when tries to access to the SPI controller registers. This patch fixes the issue. Fixes: 04f421e7 (spi: dw: use managed resources) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Andy Shevchenko authored
commit 08a707b8 upstream. The obvious fix after the commit d9c73bb8 "spi: dw: add support for gpio controlled chip select". This patch fixes the issue by using locally defined temporary variable. Fixes: d9c73bb8 (spi: dw: add support for gpio controlled chip select) Signed-off-by:
-
Jorge A. Ventura authored
commit 3d0763c0 upstream. The spi hangs waiting the completion of omap2_mcspi_rx_callback. Signed-off-by:
Jorge A. Ventura <jorge.araujo.ventura@gmail.com> Signed-off-by:
-
Weston Andros Adamson authored
commit 78270e8f upstream. Commit 6094f838 "nfs: allow coalescing of subpage requests" got rid of the requirement that requests cover whole pages, but it made some incorrect assumptions. It turns out that callers of this interface can map adjacent requests (by file position as seen by req_offset + req->wb_bytes) to different pages, even when they could share a page. An example is the direct I/O interface - iov_iter_get_pages_alloc may return one segment with a partial page filled and the next segment (which is adjacent in the file position) starts with a new page. Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Weston Andros Adamson authored
commit bba5c188 upstream. Adjacent requests that share the same page are allowed, but should only use one entry in the page vector. This avoids overruning the page vector - it is sized based on how many bytes there are, not by request count. This fixes issues that manifest as "Redzone overwritten" bugs (the vector overrun) and hangs waiting on page read / write, as it waits on the same page more than once. This also adds bounds checking to the page vector with a graceful failure (WARN_ON_ONCE and pgio error returned to application). Reported-by:
-
Weston Andros Adamson authored
commit 7c3af975 upstream. This handles the 'nonblock=false' case in nfs_lock_and_join_requests. If the group is already locked and blocking is allowed, drop the inode lock and wait for the group lock to be cleared before trying it all again. This should fix warnings found in peterz's tree (sched/wait branch), where might_sleep() checks are added to wait.[ch]. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
-
Weston Andros Adamson authored
commit 94970014 upstream. This fixes handling of errors from nfs_page_group_lock in nfs_lock_and_join_requests. It now releases the inode lock and the reference to the head request. Reported-by:
-
Weston Andros Adamson authored
commit bfd484a5 upstream. __nfs_pageio_add_request was calling nfs_page_group_lock nonblocking, but this can return -EAGAIN which would end up passing -EIO to the application. There is no reason not to block in this path, so change the two calls to do so. Also, there is no need to check the return value of nfs_page_group_lock when nonblock=false, so remove the error handling code. Signed-off-by:
-
Weston Andros Adamson authored
commit bc8a309e upstream. nfs_page_group_lock was calling wait_on_bit_lock even when told not to block. Fix by first trying test_and_set_bit, followed by wait_on_bit_lock if and only if blocking is allowed. Return -EAGAIN if nonblocking and the test_and_set of the bit was already locked. Signed-off-by:
-
Weston Andros Adamson authored
commit fd2f3a06 upstream. Flip the meaning of the second argument from 'wait' to 'nonblock' to match related functions. Update all five calls to reflect this change. Signed-off-by:
-
Weston Andros Adamson authored
commit 411a99ad upstream. Signed-off-by:
-
Weston Andros Adamson authored
commit e6cf82d1 upstream. This is useful when lsegs need to be released while holding locks. Signed-off-by:
-
Weston Andros Adamson authored
commit e7029206 upstream. Return errors from wait_on_bit_lock from nfs_page_group_lock. Add a bool argument @wait to nfs_page_group_lock. If true, loop over wait_on_bit_lock until it returns cleanly. If false, return the error from wait_on_bit_lock. Signed-off-by:
-
Weston Andros Adamson authored
commit 4714fb51 upstream. The refcounting on nfs_pgio_header was related to there being (possibly) more than one nfs_pgio_data. Now that nfs_pgio_data has been merged into nfs_pgio_header, there is no reason to do this ref counting. Just call the completion callback on nfs_pgio_release/nfs_pgio_error. Signed-off-by:
-
Weston Andros Adamson authored
commit d45f60c6 upstream. struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is passed around everywhere, because there used to be multiple _data structs per _header. Many of these functions then use the _data to find a pointer to the _header. This patch cleans this up by merging the nfs_pgio_data structure into nfs_pgio_header and passing nfs_pgio_header around instead. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Weston Andros Adamson authored
commit 823b0c9d upstream. Rename "verf" to "writeverf" and "pages" to "page_array" to prepare for merge of nfs_pgio_data and nfs_pgio_header. Reviewed-by:
-
Weston Andros Adamson authored
commit 1e7f3a48 upstream. nfs_rw_header was used to allocate an nfs_pgio_header along with an nfs_pgio_data, because a _header would need at least one _data. Now there is only ever one nfs_pgio_data for each nfs_pgio_header -- move it to nfs_pgio_header and get rid of nfs_rw_header. Reviewed-by:
-
J. Bruce Fields authored
commit 15b23ef5 upstream. The calculation of page_ptr here is wrong in the case the read doesn't start at an offset that is a multiple of a page. The result is that nfs4svc_encode_compoundres sets rq_next_page to a value one too small, and then the loop in svc_free_res_pages may incorrectly fail to clear a page pointer in rq_respages[]. Pages left in rq_respages[] are available for the next rpc request to use, so xdr data may be written to that page, which may hold data still waiting to be transmitted to the client or data in the page cache. The observed result was silent data corruption seen on an NFSv4 client. We tag this as "fixing" 05638dc7 because that commit exposed this bug, though the incorrect calculation predates it. Particular thanks to Andrea Arcangeli and David Gilbert for analysis and testing. Fixes: 05638dc7 "nfsd4: simplify server xdr->next_page use" Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Tested-by:
"Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
