Pull thermal SoC management fixes from Eduardo Valentin:

 - fixes to TI SoC driver, Broadcom, qoriq

 - small sparse warning fix on thermal core

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: broadcom: ns-thermal: default on iProc SoCs
  ti-soc-thermal: Fix a typo in a comment line
  ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
  ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
  thermal: core: make thermal_emergency_poweroff static
  thermal: qoriq: remove useless call for of_thermal_get_trip_points()

Pull tty/serial fixes from Greg KH:
 "Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger
  than normal, which is why I had them bake in linux-next for a few
  weeks and didn't send them to you for -rc2.

  They revert a few of the serdev patches from 4.12-rc1, and bring
  things back to how they were in 4.11, to try to make things a bit more
  stable there. Rob and Johan both agree that this is the way forward,
  so this isn't people squabbling over semantics. Other than that, just
  a few minor serial driver fixes that people have had problems with.

  All of these have been in linux-next for a few weeks with no reported
  issues"

* tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: altera_uart: call iounmap() at driver remove
  serial: imx: ensure UCR3 and UFCR are setup correctly
  MAINTAINERS/serial: Change maintainer of jsm driver
  serial: enable serdev support
  tty/serdev: add serdev registration interface
  serdev: Restore serdev_device_write_buf for atomic context
  serial: core: fix crash in uart_suspend_port
  tty: fix port buffer locking
  tty: ehv_bytechan: clean up init error handling
  serial: ifx6x60: fix use-after-free on module unload
  serial: altera_jtaguart: adding iounmap()
  serial: exar: Fix stuck MSIs
  serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
  serdev: fix tty-port client deregistration
  Revert "tty_port: register tty ports with serdev bus"
  drivers/tty: 8250: only call fintek_8250_probe when doing port I/O

Pull powerpc fixes from Michael Ellerman:
 "Fix running SPU programs on Cell, and a few other minor fixes.

  Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas
  Piggin"

* tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions
  powerpc/spufs: Fix hash faults for kernel regions
  powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N
  powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call
  selftests/powerpc: Fix TM resched DSCR test with some compilers

Pull x86 fixes from Thomas Gleixner:
 "A series of fixes for X86:

   - The final fix for the end-of-stack issue in the unwinder
   - Handle non PAT systems gracefully
   - Prevent access to uninitiliazed memory
   - Move early delay calaibration after basic init
   - Fix Kconfig help text
   - Fix a cross compile issue
   - Unbreak older make versions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
  x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()
  x86/PAT: Fix Xorg regression on CPUs that don't support PAT
  x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation
  x86/build: Permit building with old make versions
  x86/unwind: Add end-of-stack check for ftrace handlers
  Revert "x86/entry: Fix the end of the stack for newly forked tasks"
  x86/boot: Use CROSS_COMPILE prefix for readelf

Pull timer fixlet from Thomas Gleixner:
 "Silence dmesg spam by making the posix cpu timer printks depend on
  print_fatal_signals"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-timers: Make signal printks conditional

Pull RAS fixes from Thomas Gleixner:
 "Two fixlets for RAS:

   - Export memory_error() so the NFIT module can utilize it

   - Handle memory errors in NFIT correctly"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  acpi, nfit: Fix the memory error check in nfit_handle_mce()
  x86/MCE: Export memory_error()

Pull perf tooling fixes from Thomas Gleixner:

 - Synchronization of tools and kernel headers

 - A series of fixes for perf report addressing various failures:
    * Handle invalid maps proper
    * Plug a memory leak
    * Handle frames and callchain order correctly

 - Fixes for handling inlines and children mode

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/include: Sync kernel ABI headers with tooling headers
  perf tools: Put caller above callee in --children mode
  perf report: Do not drop last inlined frame
  perf report: Always honor callchain order for inlined nodes
  perf script: Add --inline option for debugging
  perf report: Fix off-by-one for non-activation frames
  perf report: Fix memory leak in addr2line when called by addr2inlines
  perf report: Don't crash on invalid maps in `-g srcline` mode

Pull locking fix from Thomas Gleixner:
 "A fix for a state leak which was introduced in the recent rework of
  futex/rtmutex interaction"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()

Pull kthread fix from Thomas Gleixner:
 "A single fix which prevents a use after free when kthread fork fails"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kthread: Fix use-after-free if kthread fork fails

Pull ftrace fixes from Steven Rostedt:
 "There's been a few memory issues found with ftrace.

  One was simply a memory leak where not all was being freed that should
  have been in releasing a file pointer on set_graph_function.

  Then Thomas found that the ftrace trampolines were marked for
  read/write as well as execute. To shrink the possible attack surface,
  he added calls to set them to ro. Which also uncovered some other
  issues with freeing module allocated memory that had its permissions
  changed.

  Kprobes had a similar issue which is fixed and a selftest was added to
  trigger that issue again"

* tag 'trace-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  x86/ftrace: Make sure that ftrace trampolines are not RWX
  x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()
  selftests/ftrace: Add a testcase for many kprobe events
  kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
  ftrace: Fix memory leak in ftrace_graph_release()

ftrace use module_alloc() to allocate trampoline pages. The mapping of
module_alloc() is RWX, which makes sense as the memory is written to right
after allocation. But nothing makes these pages RO after writing to them.

Add proper set_memory_rw/ro() calls to protect the trampolines after
modification.

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanosSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

With function tracing starting in early bootup and having its trampoline
pages being read only, a bug triggered with the following:

kernel BUG at arch/x86/mm/pageattr.c:189!
invalid opcode: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.12.0-rc2-test+ #3
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
task: ffffffffb4222500 task.stack: ffffffffb4200000
RIP: 0010:change_page_attr_set_clr+0x269/0x302
RSP: 0000:ffffffffb4203c88 EFLAGS: 00010046
RAX: 0000000000000046 RBX: 0000000000000000 RCX: 00000001b6000000
RDX: ffffffffb4203d40 RSI: 0000000000000000 RDI: ffffffffb4240d60
RBP: ffffffffb4203d18 R08: 00000001b6000000 R09: 0000000000000001
R10: ffffffffb4203aa8 R11: 0000000000000003 R12: ffffffffc029b000
R13: ffffffffb4203d40 R14: 0000000000000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff9a639ea00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff9a636b384000 CR3: 00000001ea21d000 CR4: 00000000000406b0
Call Trace:
 change_page_attr_clear+0x1f/0x21
 set_memory_ro+0x1e/0x20
 arch_ftrace_update_trampoline+0x207/0x21c
 ? ftrace_caller+0x64/0x64
 ? 0xffffffffc029b000
 ftrace_startup+0xf4/0x198
 register_ftrace_function+0x26/0x3c
 function_trace_init+0x5e/0x73
 tracer_init+0x1e/0x23
 tracing_set_tracer+0x127/0x15a
 register_tracer+0x19b/0x1bc
 init_function_trace+0x90/0x92
 early_trace_init+0x236/0x2b3
 start_kernel+0x200/0x3f5
 x86_64_start_reservations+0x29/0x2b
 x86_64_start_kernel+0x17c/0x18f
 secondary_startup_64+0x9f/0x9f
 ? secondary_startup_64+0x9f/0x9f

Interrupts should not be enabled at this early in the boot process. It is
also fine to leave interrupts enabled during this time as there's only one
CPU running, and on_each_cpu() means to only run on the current CPU.

If early_boot_irqs_disabled is set, it is safe to run cpu_flush_range() with
interrupts disabled. Don't trigger a BUG_ON() in that case.

Link: http://lkml.kernel.org/r/20170526093717.0be3b849@gandalf.local.homeSuggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add a testcase to test kprobes via ftrace interface
with many concurrent kprobe events.

This tries to add many kprobe events (up to 256) on
kernel functions. To avoid making ftrace-based
kprobes (kprobes on fentry), it skips first N bytes
(on x86 N=5, on ppc or arm N=4) of function entry.
After that, it enables all those events, disable it,
and remove it.

Since the unoptimization buffer reclaiming will
be delayed, after removing events, it will wait
enough time.

Link: http://lkml.kernel.org/r/149577388470.11702.11832460851769204511.stgit@devboxSigned-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix kprobes to set(recover) RWX bits correctly on trampoline
buffer before releasing it. Releasing readonly page to
module_memfree() crash the kernel.

Without this fix, if kprobes user register a bunch of kprobes
in function body (since kprobes on function entry usually
use ftrace) and unregister it, kernel hits a BUG and crash.

Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devboxSigned-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: d0381c81 ("kprobes/x86: Set kprobes pages read-only")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ftrace_hash is being kfree'ed in ftrace_graph_release(), however the
->buckets field is not.  This results in a memory leak that is easily
captured by kmemleak:

unreferenced object 0xffff880038afe000 (size 8192):
  comm "trace-cmd", pid 238, jiffies 4294916898 (age 9.736s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff815f561e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8113964d>] __kmalloc+0x12d/0x1a0
    [<ffffffff810bf6d1>] alloc_ftrace_hash+0x51/0x80
    [<ffffffff810c0523>] __ftrace_graph_open.isra.39.constprop.46+0xa3/0x100
    [<ffffffff810c05e8>] ftrace_graph_open+0x68/0xa0
    [<ffffffff8114003d>] do_dentry_open.isra.1+0x1bd/0x2d0
    [<ffffffff81140df7>] vfs_open+0x47/0x60
    [<ffffffff81150f95>] path_openat+0x2a5/0x1020
    [<ffffffff81152d6a>] do_filp_open+0x8a/0xf0
    [<ffffffff811411df>] do_sys_open+0x12f/0x200
    [<ffffffff811412ce>] SyS_open+0x1e/0x20
    [<ffffffff815fa6e0>] entry_SYSCALL_64_fastpath+0x13/0x94
    [<ffffffffffffffff>] 0xffffffffffffffff

Link: http://lkml.kernel.org/r/20170525152038.7661-1-lhenriques@suse.com

Cc: stable@vger.kernel.org
Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull input layer fixes from Dmitry Torokhov:
 "Just a few fixups to a couple of drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - ignore signals when finishing updating firmware
  Input: elan_i2c - clear INT before resetting controller
  Input: atmel_mxt_ts - add T100 as a readable object
  Input: edt-ft5x06 - increase allowed data range for threshold parameter

Merge tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fix from Jacek Anaszewski:
 "A single LED fix for 4.12-rc3.

  leds-pca955x driver uses only i2c_smbus API and thus it should pass
  I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality"

* tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca955x: Correct I2C Functionality

Pull networking fixes from David Miller:

 1) Fix state pruning in bpf verifier wrt. alignment, from Daniel
    Borkmann.

 2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide
    Caratti.

 3) Fix bit field definitions for rss_hash_type of descriptors in mlx5
    driver, from Jesper Brouer.

 4) Defer slave->link updates until bonding is ready to do a full commit
    to the new settings, from Nithin Sujir.

 5) Properly reference count ipv4 FIB metrics to avoid use after free
    situations, from Eric Dumazet and several others including Cong Wang
    and Julian Anastasov.

 6) Fix races in llc_ui_bind(), from Lin Zhang.

 7) Fix regression of ESP UDP encapsulation for TCP packets, from
    Steffen Klassert.

 8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap.

 9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter
    Dawson.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  ipv4: add reference counting to metrics
  net: ethernet: ax88796: don't call free_irq without request_irq first
  ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
  sctp: fix ICMP processing if skb is non-linear
  net: llc: add lock_sock in llc_ui_bind to avoid a race condition
  bonding: Don't update slave->link until ready to commit
  test_bpf: Add a couple of tests for BPF_JSGE.
  bpf: add various verifier test cases
  bpf: fix wrong exposure of map_flags into fdinfo for lpm
  bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data
  bpf: properly reset caller saved regs after helper call and ld_abs/ind
  bpf: fix incorrect pruning decision when alignment must be tracked
  arp: fixed -Wuninitialized compiler warning
  tcp: avoid fastopen API to be used on AF_UNSPEC
  net: move somaxconn init from sysctl code
  net: fix potential null pointer dereference
  geneve: fix fill_info when using collect_metadata
  virtio-net: enable TSO/checksum offloads for Q-in-Q vlans
  be2net: Fix offload features for Q-in-Q packets
  vlan: Fix tcp checksum offloads in Q-in-Q vlans
  ...

Pull XFS fixes from Darrick Wong:
 "A few miscellaneous bug fixes & cleanups:

   - Fix indlen block reservation accounting bug when splitting delalloc
     extent

   - Fix warnings about unused variables that appeared in -rc1.

   - Don't spew errors when bmapping a local format directory

   - Fix an off-by-one error in a delalloc eof assertion

   - Make fsmap only return inode information for CAP_SYS_ADMIN

   - Fix a potential mount time deadlock recovering cow extents

   - Fix unaligned memory access in _btree_visit_blocks

   - Fix various SEEK_HOLE/SEEK_DATA bugs"

* tag 'xfs-4.12-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Move handling of missing page into one place in xfs_find_get_desired_pgoff()
  xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff()
  xfs: Fix missed holes in SEEK_HOLE implementation
  xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
  xfs: fix unaligned access in xfs_btree_visit_blocks
  xfs: avoid mount-time deadlock in CoW extent recovery
  xfs: only return detailed fsmap info if the caller has CAP_SYS_ADMIN
  xfs: bad assertion for delalloc an extent that start at i_size
  xfs: fix warnings about unused stack variables
  xfs: BMAPX shouldn't barf on inline-format directories
  xfs: fix indlen accounting error on partial delalloc conversion

Andrey Konovalov reported crashes in ipv4_mtu()

I could reproduce the issue with KASAN kernels, between
10.246.7.151 and 10.246.7.152 :

1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &

2) At the same time run following loop :
while :
do
 ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done

Cong Wang attempted to add back rt->fi in commit
82486aa6 ("ipv4: restore rt->fi for reference counting")
but this proved to add some issues that were complex to solve.

Instead, I suggested to add a refcount to the metrics themselves,
being a standalone object (in particular, no reference to other objects)

I tried to make this patch as small as possible to ease its backport,
instead of being super clean. Note that we believe that only ipv4 dst
need to take care of the metric refcount. But if this is wrong,
this patch adds the basic infrastructure to extend this to other
families.

Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang
for his efforts on this problem.

Fixes: 2860583f ("ipv4: Kill rt->fi")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function ax_init_dev (which is called only from the driver's .probe
function) calls free_irq in the error path without having requested the
irq in the first place. So drop the free_irq call in the error path.

Fixes: 825a2ff1 ("AX88796 network driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fix addresses two problems in the way the DSCP field is formulated
 on the encapsulating header of IPv6 tunnels.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195661

1) The IPv6 tunneling code was manipulating the DSCP field of the
 encapsulating packet using the 32b flowlabel. Since the flowlabel is
 only the lower 20b it was incorrect to assume that the upper 12b
 containing the DSCP and ECN fields would remain intact when formulating
 the encapsulating header. This fix handles the 'inherit' and
 'fixed-value' DSCP cases explicitly using the extant dsfield u8 variable.

2) The use of INET_ECN_encapsulate(0, dsfield) in ip6_tnl_xmit was
 incorrect and resulted in the DSCP value always being set to 0.

Commit 90427ef5 ("ipv6: fix flow labels when the traffic class
 is non-0") caused the regression by masking out the flowlabel
 which exposed the incorrect handling of the DSCP portion of the
 flowlabel in ip6_tunnel and ip6_gre.

Fixes: 90427ef5 ("ipv6: fix flow labels when the traffic class is non-0")
Signed-off-by: Peter Dawson <peter.a.dawson@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sometimes ICMP replies to INIT chunks are ignored by the client, even if
the encapsulated SCTP headers match an open socket. This happens when the
ICMP packet is carried by a paged skb: use skb_header_pointer() to read
packet contents beyond the SCTP header, so that chunk header and initiate
tag are validated correctly.

v2:
- don't use skb_header_pointer() to read the transport header, since
  icmp_socket_deliver() already puts these 8 bytes in the linear area.
- change commit message to make specific reference to INIT chunks.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a race condition in llc_ui_bind if two or more processes/threads
try to bind a same socket.

If more processes/threads bind a same socket success that will lead to
two problems, one is this action is not what we expected, another is
will lead to kernel in unstable status or oops(in my simple test case,
cause llc2.ko can't unload).

The current code is test SOCK_ZAPPED bit to avoid a process to
bind a same socket twice but that is can't avoid more processes/threads
try to bind a same socket at the same time.

So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into this series. This contains:

   - A set of NVMe fixes, pulled from Christoph. This includes a set of
     fixes for the fiber channel bits from James Smart, rdma queue depth
     fix from Marta, controller removal fixes from Ming, and some more
     APST quirk updates from Andy.

   - A blk-mq debugfs fix from Bart, fixing a problem with the
     untangling of the sysfs and debugfs blk-mq bits that was added in
     this series.

   - Error code fix in add_partition() from Dan.

   - A small series of fixes for the new blk-throttle code from Shaohua"

* 'for-linus' of git://git.kernel.dk/linux-block: (21 commits)
  blk-mq: Only register debugfs attributes for blk-mq queues
  nvme: Quirk APST on Intel 600P/P3100 devices
  nvme: only setup block integrity if supported by the driver
  nvme: replace is_flags field in nvme_ctrl_ops with a flags field
  nvme-pci: consistencly use ctrl->device for logging
  partitions/msdos: FreeBSD UFS2 file systems are not recognized
  block: fix an error code in add_partition()
  blk-throttle: force user to configure all settings for io.low
  blk-throttle: respect 0 bps/iops settings for io.low
  blk-throttle: output some debug info in trace
  blk-throttle: add hierarchy support for latency target and idle time
  nvme_fc: remove extra controller reference taken on reconnect
  nvme_fc: correct nvme status set on abort
  nvme_fc: set logging level on resets/deletes
  nvme_fc: revise comment on teardown
  nvme_fc: Support ctrl_loss_tmo
  nvme_fc: get rid of local reconnect_delay
  blk-mq: remove blk_mq_abort_requeue_list()
  nvme: avoid to use blk_mq_abort_requeue_list()
  nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()
  ...

Pull PCI fixes from Bjorn Helgaas:

 - fix PCI_ENDPOINT build error (merged for v4.12)

 - fix Switchtec driver (merged for v4.12)

 - fix imx6 config read timeouts, fallout from changing to non-postable
   reads

 - add PM "needs_resume" flag for i915 suspend issue

* tag 'pci-v4.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/PM: Add needs_resume flag to avoid suspend complete optimization
  PCI: imx6: Fix config read timeout handling
  switchtec: Fix minor bug with partition ID register
  switchtec: Use new cdev_device_add() helper function
  PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMA

Pul ceph fixes from Ilya Dryomov:
 "A bunch of make W=1 and static checker fixups, a RECONNECT_SEQ
  messenger patch from Zheng and Luis' fallocate fix"

* tag 'ceph-for-4.12-rc3' of git://github.com/ceph/ceph-client:
  ceph: check that the new inode size is within limits in ceph_fallocate()
  libceph: cleanup old messages according to reconnect seq
  libceph: NULL deref on crush_decode() error path
  libceph: fix error handling in process_one_ticket()
  libceph: validate blob_struct_v in process_one_ticket()
  libceph: drop version variable from ceph_monmap_decode()
  libceph: make ceph_msg_data_advance() return void
  libceph: use kbasename() and kill ceph_file_part()

Pull MMC fixes from Ulf Hansson:
 "This contains fixes to make the WiFi work again for the ARM64 Hikey
  board.

  Together with a couple of DTS updates for the Hikey board we have also
  extended the mmc pwrseq_simple, to support a new power-off-delay-us DT
  property, as that was required to enable a graceful power off sequence
  for the WiFi chip"

* tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  arm64: dts: hikey: Fix WiFi support
  arm64: dts: hi6220: Move board data from the dwmmc nodes to hikey dts
  arm64: dts: hikey: Add the SYS_5V and the VDD_3V3 regulators
  arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts
  arm64: dts: hikey: Add clock for the pmic mfd
  mfd: dts: hi655x: Add clock binding for the pmic
  mmc: pwrseq_simple: Parse DTS for the power-off-delay-us property
  mmc: dt: pwrseq-simple: Invent power-off-delay-us

Pull sound fixes from Takashi Iwai:
 "This contains a few HD-audio device-specific quirks and an endianess
  fix for USB-audio, as well as the update of quirk model list document.
  All fixes are small and trivial.

  The document update could have been postponed, but it's a good thing
  for user and has absolutely zero risk of breakage, so included here"

* tag 'sound-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430
  ALSA: hda - Update the list of quirk models
  ALSA: hda - Provide dual-codecs model option for a few Realtek codecs
  ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo
  ALSA: hda - No loopback on ALC299 codec
  ALSA: usb-audio: fix Amanero Combo384 quirk on big-endian hosts

Pull drm fixes from Dave Airlie:
 "Not a whole lot happening here, a set of amdgpu fixes and one core
  deadlock fix, and some misc drivers fixes"

* tag 'drm-fixes-for-v4.12-rc3' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: fix null point error when rmmod amdgpu.
  drm/amd/powerplay: fix a signedness bugs
  drm/amdgpu: fix NULL pointer panic of emit_gds_switch
  drm/radeon: Unbreak HPD handling for r600+
  drm/amd/powerplay/smu7: disable mclk switching for high refresh rates
  drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)
  drm/radeon/ci: disable mclk switching for high refresh rates (v2)
  drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
  drm/amdgpu: fix fundamental suspend/resume issue
  drm/gma500/psb: Actually use VBT mode when it is found
  drm: Fix deadlock retry loop in page_flip_ioctl
  drm: qxl: Delay entering atomic context during cursor update
  drm/radeon: Fix oops upon driver load on PowerXpress laptops

We need to return an error for any call that asks for MSI / MSI-X
vectors only, so that non-trivial fallback logic can work properly.

Also valid dev->irq and use the "correct" errno value based on feedback
from Linus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Christoph writes:

"A couple of fixes for the next rc on the nvme front. Various FC fixes
from James, controller removal fixes from Ming (including a block layer
patch), a APST related device quirk from Andy, a RDMA fix for small
queue depth device from Marta, as well as fixes for the lack of
metadata support in non-PCIe drivers and the printk logging format from
me."

The code in blk-mq-debugfs.c assumes that it is working on a blk-mq
queue and is not intended to work on a blk-sq queue. Hence only
register blk-mq debugfs attributes for blk-mq queues.

Fixes: commit 9c1051aa ("blk-mq: untangle debugfs and sysfs")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This ensures that adjustments to x86_platform done by the hypervisor
setup is already respected by this simple calibration.

The current user of this, introduced by 1b5aeebf ("x86/earlyprintk:
Add support for earlyprintk via USB3 debug port"), comes much later
into play.

Fixes: dd759d93 ("x86/timers: Add simple udelay calibration")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: http://lkml.kernel.org/r/5e89fe60-aab3-2c1c-aba8-32f8ad376189@siemens.com

They have known firmware bugs.  A fix is apparently in the works --
once fixed firmware is available, someone from Intel (Hi, Keith!)
can adjust the quirk accordingly.

Cc: stable@vger.kernel.org # v4.11
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Currently only the PCIe driver supports metadata, so we should not claim
integrity support for the other drivers.  This prevents nasty crashes
with targets that advertise metadata support on fabrics.

Also use the opportunity to factor out some code into a separate helper
that isn't even compiled if CONFIG_BLK_DEV_INTEGRITY is disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>

So that we can have more flags for transport-specific behavior.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>

This is what most of the code already does and gives much more useful
prefixes than the device embedded in the pci_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>

A bunch of bug fixes:
- Fix display flickering on some chips at high refresh rates
- suspend/resume fix
- hotplug fix
- a couple of segfault fixes for certain cases

* 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: fix null point error when rmmod amdgpu.
  drm/amd/powerplay: fix a signedness bugs
  drm/amdgpu: fix NULL pointer panic of emit_gds_switch
  drm/radeon: Unbreak HPD handling for r600+
  drm/amd/powerplay/smu7: disable mclk switching for high refresh rates
  drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)
  drm/radeon/ci: disable mclk switching for high refresh rates (v2)
  drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
  drm/amdgpu: fix fundamental suspend/resume issue