- 10 Nov, 2016 40 commits
-
-
Greg Kroah-Hartman authored
-
Oliver Neukum authored
commit cf0ea4da upstream. Like many similar devices it needs a quirk to work. Issuing the request gets the device into an irrecoverable state. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit a6c6ead1 upstream. After commit a4675fbc (cpufreq: intel_pstate: Replace timers with utilization update callbacks) the cpufreq governor callbacks may not be invoked on NOHZ_FULL CPUs and, in particular, switching to the "performance" policy via sysfs may not have any effect on them. That is a problem, because it usually is desirable to squeeze the last bit of performance out of those CPUs, so work around it by setting the maximum P-state (within the limits) in intel_pstate_set_policy() upfront when the policy is CPUFREQ_POLICY_PERFORMANCE. Fixes: a4675fbc (cpufreq: intel_pstate: Replace timers with utilization update callbacks) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Boris Brezillon authored
commit 40b6e61a upstream. Commit e96a8a3b ("UBI: Fastmap: Do not add vol if it already exists") introduced a bug by changing the possible error codes returned by add_vol(): - this function no longer returns NULL in case of allocation failure but return ERR_PTR(-ENOMEM) - when a duplicate entry in the volume RB tree is found it returns ERR_PTR(-EEXIST) instead of ERR_PTR(-EINVAL) Fix the tests done on add_vol() return val to match this new behavior. Fixes: e96a8a3b ("UBI: Fastmap: Do not add vol if it already exists") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Goldwyn Rodrigues authored
commit 0b34c261 upstream. While free'ing qgroup->reserved resources, we much check if the page has not been invalidated by a truncate operation by checking if the page is still dirty before reducing the qgroup resources. Resources in such a case are free'd when the entire extent is released by delayed_ref. This fixes a double accounting while releasing resources in case of truncating a file, reproduced by the following testcase. SCRATCH_DEV=/dev/vdb SCRATCH_MNT=/mnt mkfs.btrfs -f $SCRATCH_DEV mount -t btrfs $SCRATCH_DEV $SCRATCH_MNT cd $SCRATCH_MNT btrfs quota enable $SCRATCH_MNT btrfs subvolume create a btrfs qgroup limit 500m a $SCRATCH_MNT sync for c in {1..15}; do dd if=/dev/zero bs=1M count=40 of=$SCRATCH_MNT/a/file; done sleep 10 sync sleep 5 touch $SCRATCH_MNT/a/newfile echo "Removing file" rm $SCRATCH_MNT/a/file Fixes: b9d0b389 ("btrfs: Add handler for invalidate page") Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Owen Hofmann authored
commit d9092f52 upstream. Commit 41061cdb ("KVM: emulate: do not initialize memopp") removes a check for non-NULL under incorrect assumptions. An undefined instruction with a ModR/M byte with Mod=0 and R/M-5 (e.g. 0xc7 0x15) will attempt to dereference a null pointer here. Fixes: 41061cdb Message-Id: <1477592752-126650-2-git-send-email-osh@google.com> Signed-off-by:
Owen Hofmann <osh@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Russell King authored
commit 04946fb6 upstream. Alexander Shiyan reports that CLPS711x fails at boot time in the data exception handler due to a NULL pointer dereference. This is caused by the late-v4t abort handler overwriting R9 (which becomes zero). Fix this by making the abort handler save and restore R9. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c3b58000 [00000008] *pgd=800000000, *pte=00000000, *ppte=feff4140 Internal error: Oops: 63c11817 [#1] PREEMPT ARM CPU: 0 PID: 448 Comm: ash Not tainted 4.8.1+ #1 Hardware name: Cirrus Logic CLPS711X (Device Tree Support) task: c39e03a0 ti: c3b4e000 task.ti: c3b4e000 PC is at __dabt_svc+0x4c/0x60 LR is at do_page_fault+0x144/0x2ac pc : [<c000d3ac>] lr : [<c000fcec>] psr: 60000093 sp : c3b4fe6c ip : 00000001 fp : b6f1bf88 r10: c387a5a0 r9 : 00000000 r8 : e4e0e001 r7 : bee3ef83 r6 : 00100000 r5 : 80000013 r4 : c022fcf8 r3 : 00000000 r2 : 00000008 r1 : bf000000 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 0000217f Table: c3b58055 DAC: 00000055 Process ash (pid: 448, stack limit = 0xc3b4e190) Stack: (0xc3b4fe6c to 0xc3b50000) fe60: bee3ef83 c05168d1 ffffffff 00000000 c3adfe80 fe80: c3a03300 00000000 c3b4fed0 c3a03400 bee3ef83 c387a5a0 b6f1bf88 00000001 fea0: c3b4febc 00000076 c022fcf8 80000013 ffffffff 0000003f bf000000 bee3ef83 fec0: 00000004 00000000 c3adfe80 c00e432c 00000812 00000005 00000001 00000006 fee0: b6f1b000 00000000 00010000 0003c944 0004d000 0004d439 00010000 b6f1b000 ff00: 00000005 00000000 00015ecc c3b4fed0 0000000a 00000000 00000000 c00a1dc0 ff20: befff000 c3a03300 c3b4e000 c0507cd8 c0508024 fffffff8 c3a03300 00000000 ff40: c0516a58 c00a35bc c39e03a0 000001c0 bea84ce8 0004e008 c3b3a000 c00a3ac0 ff60: c3b40374 c3b3a000 bea84d11 00000000 c0500188 bea84d11 bea84ce8 00000001 ff80: 0000000b c000a304 c3b4e000 00000000 bea84ce4 c00a3cd0 00000000 bea84d11 ffa0: bea84ce8 c000a160 bea84d11 bea84ce8 bea84d11 bea84ce8 0004e008 0004d450 ffc0: bea84d11 bea84ce8 00000001 0000000b b6f45ee4 00000000 b6f5ff70 bea84ce4 ffe0: b6f2f130 bea84cb0 b6f2f194 b6ef29f4 a0000010 bea84d11 02c7cffa 02c7cffd [<c000d3ac>] (__dabt_svc) from [<c022fcf8>] (__copy_to_user_std+0xf8/0x330) [<c022fcf8>] (__copy_to_user_std) from [<c00e432c>] +(load_elf_binary+0x920/0x107c) [<c00e432c>] (load_elf_binary) from [<c00a35bc>] +(search_binary_handler+0x80/0x16c) [<c00a35bc>] (search_binary_handler) from [<c00a3ac0>] +(do_execveat_common+0x418/0x600) [<c00a3ac0>] (do_execveat_common) from [<c00a3cd0>] (do_execve+0x28/0x30) [<c00a3cd0>] (do_execve) from [<c000a160>] (ret_fast_syscall+0x0/0x30) Code: e1a0200d eb00136b e321f093 e59d104c (e5891008) ---[ end trace 4b4f8086ebef98c5 ]--- Fixes: e6978e4b ("ARM: save and reset the address limit when entering an exception") Reported-by:
Alexander Shiyan <shc_work@mail.ru> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Jiri Slaby authored
commit 42acfc66 upstream. In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is divided by 2 inappropriatelly. But scr_memsetw expects size, not count, because it divides the size by 2 on its own before doing actual memset-by-words. So remove the bogus division. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Petr Písař <ppisar@redhat.com> Fixes: f8df13e0 (tty: Clean console safely) Signed-off-by:
-
Laurent Pinchart authored
commit e4e70a14 upstream. Pipelines can only be run if all their video nodes are streaming. Commit b4dfb9b3 ("[media] v4l: vsp1: Stop the pipeline upon the first STREAMOFF") fixed the pipeline stop sequence, but introduced a race condition that makes it possible to run a pipeline after stopping the stream on a video node by queuing a buffer on the other side of the pipeline. Fix this by clearing the buffers ready flag when stopping the stream, which will prevent the QBUF handler from running the pipeline. Fixes: b4dfb9b3 ("[media] v4l: vsp1: Stop the pipeline upon the first STREAMOFF") Reported-by:
Kieran Bingham <kieran@bingham.xyz> Tested-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Tony Lindgren authored
commit d8e5f0ec upstream. If we configure musb with 2430 glue as a peripheral, and then rmmod omap2430 module, we'll get the following error: [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] ... rmmod/413 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&phy->mutex){+.+.+.}, at: [<c04b9fd0>] phy_power_off+0x1c/0xb8 [ 204.678710] and this task is already holding: (&(&musb->lock)->rlock){-.-...}, at: [<bf3a482c>] musb_gadget_stop+0x24/0xec [musb_hdrc] which would create a new lock dependency: (&(&musb->lock)->rlock){-.-...} -> (&phy->mutex){+.+.+.} ... This is because some glue layers expect musb_platform_enable/disable to be called with spinlock held, and 2430 glue layer has USB PHY on the I2C bus using a mutex. We could fix the glue layers to take the spinlock, but we still have a problem of musb_plaform_enable/disable being called in an unbalanced manner. So that would still lead into USB PHY enable/disable related problems for omap2430 glue layer. While it makes sense to only enable USB PHY when needed from PM point of view, in this case we just can't do it yet without breaking things. So let's just revert phy_enable/disable related changes instead and reconsider this after we have fixed musb_platform_enable/disable to be balanced. Fixes: a83e17d0 ("usb: musb: Improve PM runtime and phy handling for 2430 glue layer") Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Stefan Wahren authored
commit 991d5add upstream. After commit b09b5224 ("usb: chipidea: implement platform shutdown callback") and commit 43a40457 ("usb: chipidea: host: set host to be null after hcd is freed") a NULL pointer dereference is caused on i.MX23 during shutdown. So ensure that role is set to CI_ROLE_END and we finish interrupt handling before the hcd is deallocated. This avoids the NULL pointer dereference. Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: b09b5224 ("usb: chipidea: implement platform shutdown callback") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Christophe JAILLET authored
commit 51fbc7c0 upstream. In commit 2abd9d5f ("usb: dwc3: ep0: Add chained TRB support"), the size of the memory allocated with 'dma_alloc_coherent()' has been modified but the corresponding calls to 'dma_free_coherent()' have not been updated accordingly. This has been spotted with coccinelle, using the following script: //////////////////// @r@ expression x0, x1, y0, y1, z0, z1, t0, t1, ret; @@ * ret = dma_alloc_coherent(x0, y0, z0, t0); ... * dma_free_coherent(x1, y1, ret, t1); @script:python@ y0 << r.y0; y1 << r.y1; @@ if y1.find(y0) == -1: print "WARNING: sizes look different: '%s' vs '%s'" % (y0, y1) //////////////////// Fixes: 2abd9d5f ("usb: dwc3: ep0: Add chained TRB support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
David Hsu authored
commit 0733424c upstream. Exported pwm channels aren't removed before the pwmchip and are leaked. This results in invalid sysfs files. This fix removes all exported pwm channels before chip removal. Signed-off-by:
David Hsu <davidhsu@google.com> Fixes: 76abbdde ("pwm: Add sysfs interface") Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Wei Yongjun authored
commit 43da7575 upstream. Fix the retrn value check which testing the wrong variable in dsi_bind(). Fixes: f76ee892 ("omapfb: copy omapdss & displays for omapfb") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Dan Carpenter authored
commit e0299908 upstream. If we "goto out;" then it calls display_timings_release(timings); Since "timings" is NULL, that's going to oops. Just return directly. Fixes: 420a4882 ('video: fbdev: pxafb: initial devicetree conversion') Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Emilio López authored
commit 58f0f9f7 upstream. As part of the sync framework destaging, the sync_file.h header was moved, but an entry was not added on Kbuild to install it. This patch resolves this omission so that "make headers_install" installs this header. Fixes: 460bfc41 ("dma-buf/sync_file: de-stage sync_file headers") Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160927143142.8975-1-emilio.lopez@collabora.co.ukSigned-off-by:
-
Boris Brezillon authored
commit ecbfa8ea upstream. scan_pool() does not mark the PEB for scrubing when bitflips are detected in the EC header of a free PEB (VID header region left to 0xff). Make sure we scrub the PEB in this case. Signed-off-by:
-
Liping Zhang authored
commit 6d19375b upstream. Justin and Chris spotted that iptables NFLOG target was broken when they upgraded the kernel to 4.8: "ulogd-2.0.5- IPs are no longer logged" or "results in segfaults in ulogd-2.0.5". Because "struct nf_loginfo li;" is a local variable, and flags will be filled with garbage value, not inited to zero. So if it contains 0x1, packets will not be logged to the userspace anymore. Fixes: 7643507f ("netfilter: xt_NFLOG: nflog-range does not truncate packets") Reported-by:
Justin Piszcz <jpiszcz@lucidpixels.com> Reported-by:
Chris Caputo <ccaputo@alt.net> Tested-by:
Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Ralf Ramsauer authored
commit 6a676fb6 upstream. Instantiated I2C device nodes are marked with OF_POPULATE. This was introduced in 4f001fd3. On unloading, loaded device nodes will of course be unmarked. The problem are nodes that fail during initialisation: If a node fails, it won't be unloaded and hence not be unmarked. If a I2C driver module is unloaded and reloaded, it will skip nodes that failed before. Skip device nodes that are already populated and mark them only in case of success. Fixes: 4f001fd3 ("i2c: Mark instantiated device nodes with OF_POPULATE") Signed-off-by:
Ralf Ramsauer <ralf@ramses-pyramidenbau.de> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Pantelis Antoniou <pantelis.antoniou@konsulko.com> [wsa: use 14-digit commit sha] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Daniel Stone authored
commit 1fb3672e upstream. The previous code would wait for fences on the framebuffer from the old plane state to complete, rather than the new, so you would see tearing everywhere. Fix this to wait on the new state before we make it active. Signed-off-by:
Daniel Stone <daniels@collabora.com> Fixes: 94f05024 ("drm/i915: nonblocking commit") Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com (cherry picked from commit 2d2c5ad8) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Paulo Zanoni authored
commit e3b9e6e3 upstream. Broadwell and newer actually compress up to 2560 lines instead of 2048 (as documented in the FBC_CTL page). If we don't take this into consideration we end up reserving too little stolen memory for the CFB, so we may allocate something else (such as a ring) right after what we reserved, and the hardware will overwrite it with the contents of the CFB when FBC is active, causing GPU hangs. Another possibility is that the CFB may be allocated at the very end of the available space, so the CFB will overlap the reserved stolen area, leading to FIFO underruns. This bug has always been a problem on BDW (the only affected platform where FBC is enabled by default), but it's much easier to reproduce since the following commit: commit c58b735f Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Aug 18 17:16:57 2016 +0100 drm/i915: Allocate rings from stolen Of course, you can only reproduce the bug if your screen is taller than 2048 lines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213 Fixes: a98ee793 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 79f2624b) Signed-off-by:
-
Ville Syrjälä authored
commit 0ce140d4 upstream. Now that we use the AUX and GMBUS assignment from VBT for all ports, let's clean up the sanitization of the port information a bit. Previosuly we only did this for port E, and only complained about a non-standard assignment for the other ports. But as we know that non-standard assignments are a fact of life, let's expand the sanitization to all the ports. v2: Include a commit message, fix up the comments a bit v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin Cc: Maarten Maathuis <madman2003@gmail.com> Tested-by:
Maarten Maathuis <madman2003@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=97877Signed-off-by:
-
Ville Syrjälä authored
commit 198c5ee3 upstream. The VBT provides the platform a way to mix and match the DDI ports vs. AUX channels. Currently we only trust the VBT for DDI E, which has no corresponding AUX channel of its own. However it is possible that some board might use some non-standard DDI vs. AUX port routing even for the other ports. Perhaps for signal routing reasons or something, So let's generalize this and trust the VBT for all ports. For now we'll limit this to DDI platforms, as we trust the VBT a bit more there anyway when it comes to the DDI ports. I've structured the code in a way that would allow us to easily expand this to other platforms as well, by simply filling in the ddi_port_info. v2: Drop whitespace changes, keep MISSING_CASE() for unknown aux ch assignment, include a commit message, include debug message during init Cc: Maarten Maathuis <madman2003@gmail.com> Tested-by:
Jim Bride <jim.bride@linux.intel.com> (cherry picked from commit 8f7ce038) Signed-off-by:
-
Felix Monninger authored
commit cac5fced upstream. drm_property_lookup_blob() returns a reference to the returned blob, and drm_atomic_replace_property_blob() takes a references to the blob it stores, so afterwards we are left owning a reference to the new_blob that we never release, and thus leak memory every time we update a property such as during drm_atomic_helper_legacy_gamma_set(). v2: update credentials, drm_property_unreference_blob() is NULL safe and NULL is passed consistently to it throughout drm_atomic.c so do so here. Reported-by:
Felix Monninger <felix.monninger@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98420Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Fixes: 5488dc16 ("drm: introduce pipe color correction properties") Reviewed-by:
-
Ville Syrjälä authored
commit 4da5caa6 upstream. Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Carlos Santa <carlos.santa@intel.com> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by:
-
Paulo Zanoni authored
commit 5e33791e upstream. Luckily, the necessary adjustments for when we're using the scaler are exactly the same as the ones needed on ILK+, so just reuse the function we already have. v2: Invert the patch order so stable backports get easier. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit cfd7e3a2) Signed-off-by:
-
Paulo Zanoni authored
commit 01c72d6c upstream. With the previous code we were only recomputing the DDB partitioning for the CRTCs included in the atomic commit, so any other active CRTCs would end up having their DDB registers zeroed. In this patch we make sure that the computed state starts as a copy of the current partitioning, and then we only zero the DDBs that we're actually going to recompute. How to reproduce the bug: 1 - Enable the primary plane on pipe A 2 - Enable the primary plane on pipe B 3 - Enable the cursor or sprite plane on pipe A Step 3 will zero the DDB partitioning for pipe B since it's not included in the commit that enabled the cursor or sprite for pipe A. I expect this to fix many FIFO underrun problems on gen9+. v2: - Mention the cursor on the steps to reproduce the problem (Paulo). - Add Testcase tag provided by Maarten (Maarten). Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596 Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-WoesSigned-off-by:
Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 5a920b85) Signed-off-by:
-
Ville Syrjälä authored
commit a2889606 upstream. The fbdev helper code keeps around two lists of connectors. One is the list of all connectors it could use, and that list already holds references for all the connectors. However the other list, or rather lists, is the one actively being used. That list is tracked per-crtc and currently doesn't hold any extra references. Let's grab those extra references to avoid oopsing when the connector vanishes. The list of all possible connectors should get updated when the hpd happens, but the list of actively used connectors would not get updated until the next time the fb-helper picks through the set of possible connectors. And so we need to hang on to the connectors until that time. Since we need to clean up in drm_fb_helper_crtc_free() as well, let's pull the code to a common place. And while at it let's pull in up the modeset->mode cleanup in there as well. The case of modeset->fb is a bit less clear. I'm thinking we should probably hold a reference to it, but for now I just slapped on a FIXME. v2: Cleanup things drm_fb_helper_crtc_free() too (Chris) v3: Don't leak modeset->connectors (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> (v1) Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by:
-
Ville Syrjälä authored
commit 7dfcb36a upstream. We need to drop the connector references already taken when we abort in the middle of drm_fb_helper_single_add_all_connectors() Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
-
Takashi Iwai authored
commit 87d3b658 upstream. Since 4.7 kernel, we've seen the error messages like kernel: [TTM] Buffer eviction failed kernel: qxl 0000:00:02.0: object_init failed for (4026540032, 0x00000001) kernel: [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO on QXL when switching and accessing on VT. The culprit was the generic deferred_io code (qxl driver switched to it since 4.7). There is a race between the dirty clip update and the call of callback. In drm_fb_helper_dirty(), the dirty clip is updated in the spinlock, while it kicks off the update worker outside the spinlock. Meanwhile the update worker clears the dirty clip in the spinlock, too. Thus, when drm_fb_helper_dirty() is called concurrently, schedule_work() is called after the clip is cleared in the first worker call. This patch addresses it by validating the clip before calling the dirty fb callback. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98322 Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1003298 Fixes: eaa434de ('drm/fb-helper: Add fb_deferred_io support') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Peter Wu authored
commit b0a6af8b upstream. Check whether the kernel really supports power resources for a device, otherwise the power might not be removed when the device is runtime suspended (DSM should still work in these cases where PR does not). This is a workaround for a problem where ACPICA and Windows 10 differ in behavior. ACPICA does not correctly enumerate power resources within a conditional block (due to delayed execution of such blocks) and as a result power_resources is set to false even if _PR3 exists. Fixes: 692a17dc ("drm/nouveau/acpi: fix lockup with PCIe runtime PM") Link: https://bugs.freedesktop.org/show_bug.cgi?id=98398Reported-and-tested-by:
Rick Kerkhof <rick.2889@gmail.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Lucas Stach authored
commit 537b4b46 upstream. The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 7dc86ef5 upstream. Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by:
-
Tom St Denis authored
commit fb9a5b0c upstream. Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Liu Ying authored
commit e73aca51 upstream. Before accessing the u/v offset(aka, u/vbo for IPUv3) of the old plane state's relevant fb, we should make sure the fb is in YU12 or YV12 pixel format(which are the two YUV pixel formats we support only), otherwise, we are likely to trigger BUG_ON() in drm_plane_state_to_u/vbo() since the fb's pixel format is probably not YU12 or YV12. Link: https://bugs.freedesktop.org/show_bug.cgi?id=98150 Fixes: c6c1f9bc ("drm/imx: Add active plane reconfiguration support") Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Liu Ying authored
commit 43daa013 upstream. We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to switch EBA buffer(for hardware double buffering) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset, otherwise, we initialize the two EBA buffers with the buffer address. Fixes: c6c1f9bc ("drm/imx: Add active plane reconfiguration support") Signed-off-by:
-
Michel Dänzer authored
commit 9dc79965 upstream. This reverts commit 1a738347. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
NeilBrown authored
commit 1217e1d1 upstream. mddev->curr_resync usually records where the current resync is up to, but during the starting phase it has some "magic" values. 1 - means that the array is trying to start a resync, but has yielded to another array which shares physical devices, and also needs to start a resync 2 - means the array is trying to start resync, but has found another array which shares physical devices and has already started resync. 3 - means that resync has commensed, but it is possible that nothing has actually been resynced yet. It is important that this value not be visible to user-space and particularly that it doesn't get written to the metadata, as the resync or recovery checkpoint. In part, this is because it may be slightly higher than the correct value, though this is very rare. In part, because it is not a multiple of 4K, and some devices only support 4K aligned accesses. There are two places where this value is propagates into either ->curr_resync_completed or ->recovery_cp or ->recovery_offset. These currently avoid the propagation of values 1 and 3, but will allow 3 to leak through. Change them to only propagate the value if it is > 3. As this can cause an array to fail, the patch is suitable for -stable. Reported-by:
Viswesh <viswesh.vichu@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Shaohua Li authored
commit 579ed34f upstream. This is the counterpart of raid10 fix. If a write error occurs, raid10 will try to rewrite the bio in small chunk size. If the rewrite fails, raid10 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Cc: Sitsofe Wheeler <sitsofe@gmail.com> Signed-off-by:
-
Shaohua Li authored
commit e3f948cd upstream. If a write error occurs, raid1 will try to rewrite the bio in small chunk size. If the rewrite fails, raid1 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Reported-and-tested-by:
Sitsofe Wheeler <sitsofe@gmail.com> Signed-off-by:
-
