- 24 Jun, 2017 40 commits
-
-
Greg Kroah-Hartman authored
-
Hugh Dickins authored
commit f4cb767d upstream. Trinity gets kernel BUG at mm/mmap.c:1963! in about 3 minutes of mmap testing. That's the VM_BUG_ON(gap_end < gap_start) at the end of unmapped_area_topdown(). Linus points out how MAP_FIXED (which does not have to respect our stack guard gap intentions) could result in gap_end below gap_start there. Fix that, and the similar case in its alternative, unmapped_area(). Fixes: 1be7107f ("mm: larger stack guard gap, between vmas") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Debugged-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit bd726c90 upstream. Fix expand_upwards() on architectures with an upward-growing stack (parisc, metag and partly IA-64) to allow the stack to reliably grow exactly up to the address space limit given by TASK_SIZE. Signed-off-by:
Helge Deller <deller@gmx.de> Acked-by:
-
Hugh Dickins authored
commit 1be7107f upstream. Stack guard page is a useful feature to reduce a risk of stack smashing into a different mapping. We have been using a single page gap which is sufficient to prevent having stack adjacent to a different mapping. But this seems to be insufficient in the light of the stack usage in userspace. E.g. glibc uses as large as 64kB alloca() in many commonly used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX] which is 256kB or stack strings with MAX_ARG_STRLEN. This will become especially dangerous for suid binaries and the default no limit for the stack size limit because those applications can be tricked to consume a large portion of the stack and a single glibc call could jump over the guard page. These attacks are not theoretical, unfortunatelly. Make those attacks less probable by increasing the stack guard gap to 1MB (on systems with 4k pages; but make it depend on the page size because systems with larger base pages might cap stack allocations in the PAGE_SIZE units) which should cover larger alloca() and VLA stack allocations. It is obviously not a full fix because the problem is somehow inherent, but it should reduce attack space a lot. One could argue that the gap size should be configurable from userspace, but that can be done later when somebody finds that the new 1MB is wrong for some special case applications. For now, add a kernel command line option (stack_guard_gap) to specify the stack gap size (in page units). Implementation wise, first delete all the old code for stack guard page: because although we could get away with accounting one extra page in a stack vma, accounting a larger gap can break userspace - case in point, a program run with "ulimit -S -v 20000" failed when the 1MB gap was counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK and strict non-overcommit mode. Instead of keeping gap inside the stack vma, maintain the stack guard gap as a gap between vmas: using vm_start_gap() in place of vm_start (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few places which need to respect the gap - mainly arch_get_unmapped_area(), and and the vma tree's subtree_gap support for that. Original-patch-by:
Oleg Nesterov <oleg@redhat.com> Original-patch-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Thomas Gleixner authored
commit ff86bf0c upstream. The alarmtimer code has another source of potentially rearming itself too fast. Interval timers with a very samll interval have a similar CPU hog effect as the previously fixed overflow issue. The reason is that alarmtimers do not implement the normal protection against this kind of problem which the other posix timer use: timer expires -> queue signal -> deliver signal -> rearm timer This scheme brings the rearming under scheduler control and prevents permanently firing timers which hog the CPU. Bringing this scheme to the alarm timer code is a major overhaul because it lacks all the necessary mechanisms completely. So for a quick fix limit the interval to one jiffie. This is not problematic in practice as alarmtimers are usually backed by an RTC for suspend which have 1 second resolution. It could be therefor argued that the resolution of this clock should be set to 1 second in general, but that's outside the scope of this fix. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kostya Serebryany <kcc@google.com> Cc: syzkaller <syzkaller@googlegroups.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.deSigned-off-by:
-
David Miller authored
commit d41519a6 upstream. On sparc, if we have an alloca() like situation, as is the case with SHASH_DESC_ON_STACK(), we can end up referencing deallocated stack memory. The result can be that the value is clobbered if a trap or interrupt arrives at just the right instruction. It only occurs if the function ends returning a value from that alloca() area and that value can be placed into the return value register using a single instruction. For example, in lib/libcrc32c.c:crc32c() we end up with a return sequence like: return %i7+8 lduw [%o5+16], %o0 ! MEM[(u32 *)__shash_desc.1_10 + 16B], %o5 holds the base of the on-stack area allocated for the shash descriptor. But the return released the stack frame and the register window. So if an intererupt arrives between 'return' and 'lduw', then the value read at %o5+16 can be corrupted. Add a data compiler barrier to work around this problem. This is exactly what the gcc fix will end up doing as well, and it absolutely should not change the code generated for other cpus (unless gcc on them has the same bug :-) With crucial insight from Eric Sandeen. Reported-by:
Anatoly Pugachev <matorola@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Hon Ching \(Vicky) Lo authored
commit 31574d32 upstream. The current code passes the address of tpm_chip as the argument to dev_get_drvdata() without prior NULL check in tpm_ibmvtpm_get_desired_dma. This resulted an oops during kernel boot when vTPM is enabled in Power partition configured in active memory sharing mode. The vio_driver's get_desired_dma() is called before the probe(), which for vtpm is tpm_ibmvtpm_probe, and it's this latter function that initializes the driver and set data. Attempting to get data before the probe() caused the problem. This patch adds a NULL check to the tpm_ibmvtpm_get_desired_dma. fixes: 9e0d39d8 ("tpm: Remove useless priv field in struct tpm_vendor_specific") Signed-off-by:
Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Reviewed-by:
Jarkko Sakkine <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Paul Burton authored
commit bcd7c45e upstream. The .its targets require information about the kernel binary, such as its entry point, which is extracted from the vmlinux ELF. We therefore require that the ELF is built before the .its files are generated. Declare this requirement in the Makefile such that make will ensure this is always the case, otherwise in corner cases we can hit issues as the .its is generated with an incorrect (either invalid or stale) entry point. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: cf2a5e0b ("MIPS: Support generating Flattened Image Trees (.itb)") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16179/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
commit 1a73d931 upstream. The code handling the pop76 opcode (ie. bnezc & jialc instructions) in __compute_return_epc_for_insn() needs to set the value of $31 in the jialc case, which is encoded with rs = 0. However its check to differentiate bnezc (rs != 0) from jialc (rs = 0) was unfortunately backwards, meaning that if we emulate a bnezc instruction we clobber $31 & if we emulate a jialc instruction it actually behaves like a jic instruction. Fix this by inverting the check of rs to match the way the instructions are actually encoded. Signed-off-by:
-
Shuah Khan authored
commit 8ae584d1 upstream. Axius clock error path returns without disabling clock and suspend clock. Fix it to disable them before returning error. Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Christophe JAILLET authored
commit 990758c5 upstream. 'cdev->os_desc_req' has been allocated with 'usb_ep_alloc_request()' so 'usb_ep_free_request()' should be used to free it. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Thomas Gleixner authored
commit f4781e76 upstream. Andrey reported a alartimer related RCU stall while fuzzing the kernel with syzkaller. The reason for this is an overflow in ktime_add() which brings the resulting time into negative space and causes immediate expiry of the timer. The following rearm with a small interval does not bring the timer back into positive space due to the same issue. This results in a permanent firing alarmtimer which hogs the CPU. Use ktime_add_safe() instead which detects the overflow and clamps the result to KTIME_SEC_MAX. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Heiner Kallweit authored
commit fa07ab72 upstream. In case __irq_set_trigger() fails the resources requested via irq_request_resources() are not released. Add the missing release call into the error handling path. Fixes: c1bacbae ("genirq: Provide irq_request/release_resources chip callbacks") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Andy Lutomirski authored
commit 252d2a41 upstream. idle_task_exit() can be called with IRQs on x86 on and therefore should use switch_mm(), not switch_mm_irqs_off(). This doesn't seem to cause any problems right now, but it will confuse my upcoming TLB flush changes. Nonetheless, I think it should be backported because it's trivial. There won't be any meaningful performance impact because idle_task_exit() is only used when offlining a CPU. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jean-Baptiste Maneyrol authored
commit 948588e2 upstream. Starting from MPU6500, accelerometer dlpf is set in a separate register named ACCEL_CONFIG_2. Add this new register in the map and set it for the corresponding chips. Signed-off-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Yu Zhao authored
commit ef707629 upstream. I saw need_resched() warnings when swapping on large swapfile (TBs) because continuously allocating many pages in swap_cgroup_prepare() took too long. We already cond_resched when freeing page in swap_cgroup_swapoff(). Do the same for the page allocation. Link: http://lkml.kernel.org/r/20170604200109.17606-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Acked-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
James Morse authored
commit 7258ae5c upstream. memory_failure() chooses a recovery action function based on the page flags. For huge pages it uses the tail page flags which don't have anything interesting set, resulting in: > Memory failure: 0x9be3b4: Unknown page state > Memory failure: 0x9be3b4: recovery action for unknown page: Failed Instead, save a copy of the head page's flags if this is a huge page, this means if there are no relevant flags for this tail page, we use the head pages flags instead. This results in the me_huge_page() recovery action being called: > Memory failure: 0x9b7969: recovery action for huge page: Delayed For hugepages that have not yet been allocated, this allows the hugepage to be dequeued. Fixes: 524fca1e ("HWPOISON: fix misjudgement of page_action() for errors on mlocked pages") Link: http://lkml.kernel.org/r/20170524130204.21845-1-james.morse@arm.comSigned-off-by:
James Morse <james.morse@arm.com> Tested-by:
Punit Agrawal <punit.agrawal@arm.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Alan Stern authored
commit f16443a0 upstream. Using the syzkaller kernel fuzzer, Andrey Konovalov generated the following error in gadgetfs: > BUG: KASAN: use-after-free in __lock_acquire+0x3069/0x3690 > kernel/locking/lockdep.c:3246 > Read of size 8 at addr ffff88003a2bdaf8 by task kworker/3:1/903 > > CPU: 3 PID: 903 Comm: kworker/3:1 Not tainted 4.12.0-rc4+ #35 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 > Workqueue: usb_hub_wq hub_event > Call Trace: > __dump_stack lib/dump_stack.c:16 [inline] > dump_stack+0x292/0x395 lib/dump_stack.c:52 > print_address_description+0x78/0x280 mm/kasan/report.c:252 > kasan_report_error mm/kasan/report.c:351 [inline] > kasan_report+0x230/0x340 mm/kasan/report.c:408 > __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:429 > __lock_acquire+0x3069/0x3690 kernel/locking/lockdep.c:3246 > lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855 > __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] > _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 > spin_lock include/linux/spinlock.h:299 [inline] > gadgetfs_suspend+0x89/0x130 drivers/usb/gadget/legacy/inode.c:1682 > set_link_state+0x88e/0xae0 drivers/usb/gadget/udc/dummy_hcd.c:455 > dummy_hub_control+0xd7e/0x1fb0 drivers/usb/gadget/udc/dummy_hcd.c:2074 > rh_call_control drivers/usb/core/hcd.c:689 [inline] > rh_urb_enqueue drivers/usb/core/hcd.c:846 [inline] > usb_hcd_submit_urb+0x92f/0x20b0 drivers/usb/core/hcd.c:1650 > usb_submit_urb+0x8b2/0x12c0 drivers/usb/core/urb.c:542 > usb_start_wait_urb+0x148/0x5b0 drivers/usb/core/message.c:56 > usb_internal_control_msg drivers/usb/core/message.c:100 [inline] > usb_control_msg+0x341/0x4d0 drivers/usb/core/message.c:151 > usb_clear_port_feature+0x74/0xa0 drivers/usb/core/hub.c:412 > hub_port_disable+0x123/0x510 drivers/usb/core/hub.c:4177 > hub_port_init+0x1ed/0x2940 drivers/usb/core/hub.c:4648 > hub_port_connect drivers/usb/core/hub.c:4826 [inline] > hub_port_connect_change drivers/usb/core/hub.c:4999 [inline] > port_event drivers/usb/core/hub.c:5105 [inline] > hub_event+0x1ae1/0x3d40 drivers/usb/core/hub.c:5185 > process_one_work+0xc08/0x1bd0 kernel/workqueue.c:2097 > process_scheduled_works kernel/workqueue.c:2157 [inline] > worker_thread+0xb2b/0x1860 kernel/workqueue.c:2233 > kthread+0x363/0x440 kernel/kthread.c:231 > ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:424 > > Allocated by task 9958: > save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 > save_stack+0x43/0xd0 mm/kasan/kasan.c:513 > set_track mm/kasan/kasan.c:525 [inline] > kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:617 > kmem_cache_alloc_trace+0x87/0x280 mm/slub.c:2745 > kmalloc include/linux/slab.h:492 [inline] > kzalloc include/linux/slab.h:665 [inline] > dev_new drivers/usb/gadget/legacy/inode.c:170 [inline] > gadgetfs_fill_super+0x24f/0x540 drivers/usb/gadget/legacy/inode.c:1993 > mount_single+0xf6/0x160 fs/super.c:1192 > gadgetfs_mount+0x31/0x40 drivers/usb/gadget/legacy/inode.c:2019 > mount_fs+0x9c/0x2d0 fs/super.c:1223 > vfs_kern_mount.part.25+0xcb/0x490 fs/namespace.c:976 > vfs_kern_mount fs/namespace.c:2509 [inline] > do_new_mount fs/namespace.c:2512 [inline] > do_mount+0x41b/0x2d90 fs/namespace.c:2834 > SYSC_mount fs/namespace.c:3050 [inline] > SyS_mount+0xb0/0x120 fs/namespace.c:3027 > entry_SYSCALL_64_fastpath+0x1f/0xbe > > Freed by task 9960: > save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 > save_stack+0x43/0xd0 mm/kasan/kasan.c:513 > set_track mm/kasan/kasan.c:525 [inline] > kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:590 > slab_free_hook mm/slub.c:1357 [inline] > slab_free_freelist_hook mm/slub.c:1379 [inline] > slab_free mm/slub.c:2961 [inline] > kfree+0xed/0x2b0 mm/slub.c:3882 > put_dev+0x124/0x160 drivers/usb/gadget/legacy/inode.c:163 > gadgetfs_kill_sb+0x33/0x60 drivers/usb/gadget/legacy/inode.c:2027 > deactivate_locked_super+0x8d/0xd0 fs/super.c:309 > deactivate_super+0x21e/0x310 fs/super.c:340 > cleanup_mnt+0xb7/0x150 fs/namespace.c:1112 > __cleanup_mnt+0x1b/0x20 fs/namespace.c:1119 > task_work_run+0x1a0/0x280 kernel/task_work.c:116 > exit_task_work include/linux/task_work.h:21 [inline] > do_exit+0x18a8/0x2820 kernel/exit.c:878 > do_group_exit+0x14e/0x420 kernel/exit.c:982 > get_signal+0x784/0x1780 kernel/signal.c:2318 > do_signal+0xd7/0x2130 arch/x86/kernel/signal.c:808 > exit_to_usermode_loop+0x1ac/0x240 arch/x86/entry/common.c:157 > prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] > syscall_return_slowpath+0x3ba/0x410 arch/x86/entry/common.c:263 > entry_SYSCALL_64_fastpath+0xbc/0xbe > > The buggy address belongs to the object at ffff88003a2bdae0 > which belongs to the cache kmalloc-1024 of size 1024 > The buggy address is located 24 bytes inside of > 1024-byte region [ffff88003a2bdae0, ffff88003a2bdee0) > The buggy address belongs to the page: > page:ffffea0000e8ae00 count:1 mapcount:0 mapping: (null) > index:0x0 compound_mapcount: 0 > flags: 0x100000000008100(slab|head) > raw: 0100000000008100 0000000000000000 0000000000000000 0000000100170017 > raw: ffffea0000ed3020 ffffea0000f5f820 ffff88003e80efc0 0000000000000000 > page dumped because: kasan: bad access detected > > Memory state around the buggy address: > ffff88003a2bd980: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff88003a2bda00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > >ffff88003a2bda80: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fb > ^ > ffff88003a2bdb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff88003a2bdb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ================================================================== What this means is that the gadgetfs_suspend() routine was trying to access dev->lock after it had been deallocated. The root cause is a race in the dummy_hcd driver; the dummy_udc_stop() routine can race with the rest of the driver because it contains no locking. And even when proper locking is added, it can still race with the set_link_state() function because that function incorrectly drops the private spinlock before invoking any gadget driver callbacks. The result of this race, as seen above, is that set_link_state() can invoke a callback in gadgetfs even after gadgetfs has been unbound from dummy_hcd's UDC and its private data structures have been deallocated. include/linux/usb/gadget.h documents that the ->reset, ->disconnect, ->suspend, and ->resume callbacks may be invoked in interrupt context. In general this is necessary, to prevent races with gadget driver removal. This patch fixes dummy_hcd to retain the spinlock across these calls, and it adds a spinlock acquisition to dummy_udc_stop() to prevent the race. The net2280 driver makes the same mistake of dropping the private spinlock for its ->disconnect and ->reset callback invocations. The patch fixes it too. Lastly, since gadgetfs_suspend() may be invoked in interrupt context, it cannot assume that interrupts are enabled when it runs. It must use spin_lock_irqsave() instead of spin_lock_irq(). The patch fixes that bug as well. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
-
Alan Stern authored
commit f50b878f upstream. A NULL-pointer dereference bug in gadgetfs was uncovered by syzkaller: > kasan: GPF could be caused by NULL-ptr deref or user memory access > general protection fault: 0000 [#1] SMP KASAN > Dumping ftrace buffer: > (ftrace buffer empty) > Modules linked in: > CPU: 2 PID: 4820 Comm: syz-executor0 Not tainted 4.12.0-rc4+ #5 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 > task: ffff880039542dc0 task.stack: ffff88003bdd0000 > RIP: 0010:__list_del_entry_valid+0x7e/0x170 lib/list_debug.c:51 > RSP: 0018:ffff88003bdd6e50 EFLAGS: 00010246 > RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000010000 > RDX: 0000000000000000 RSI: ffffffff86504948 RDI: ffffffff86504950 > RBP: ffff88003bdd6e68 R08: ffff880039542dc0 R09: ffffffff8778ce00 > R10: ffff88003bdd6e68 R11: dffffc0000000000 R12: 0000000000000000 > R13: dffffc0000000000 R14: 1ffff100077badd2 R15: ffffffff864d2e40 > FS: 0000000000000000(0000) GS:ffff88006dc00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 000000002014aff9 CR3: 0000000006022000 CR4: 00000000000006e0 > Call Trace: > __list_del_entry include/linux/list.h:116 [inline] > list_del include/linux/list.h:124 [inline] > usb_gadget_unregister_driver+0x166/0x4c0 drivers/usb/gadget/udc/core.c:1387 > dev_release+0x80/0x160 drivers/usb/gadget/legacy/inode.c:1187 > __fput+0x332/0x7f0 fs/file_table.c:209 > ____fput+0x15/0x20 fs/file_table.c:245 > task_work_run+0x19b/0x270 kernel/task_work.c:116 > exit_task_work include/linux/task_work.h:21 [inline] > do_exit+0x18a3/0x2820 kernel/exit.c:878 > do_group_exit+0x149/0x420 kernel/exit.c:982 > get_signal+0x77f/0x1780 kernel/signal.c:2318 > do_signal+0xd2/0x2130 arch/x86/kernel/signal.c:808 > exit_to_usermode_loop+0x1a7/0x240 arch/x86/entry/common.c:157 > prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] > syscall_return_slowpath+0x3ba/0x410 arch/x86/entry/common.c:263 > entry_SYSCALL_64_fastpath+0xbc/0xbe > RIP: 0033:0x4461f9 > RSP: 002b:00007fdac2b1ecf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca > RAX: fffffffffffffe00 RBX: 00000000007080c8 RCX: 00000000004461f9 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000007080c8 > RBP: 00000000007080a8 R08: 0000000000000000 R09: 0000000000000000 > R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 > R13: 0000000000000000 R14: 00007fdac2b1f9c0 R15: 00007fdac2b1f700 > Code: 00 00 00 00 ad de 49 39 c4 74 6a 48 b8 00 02 00 00 00 00 ad de > 48 89 da 48 39 c3 74 74 48 c1 ea 03 48 b8 00 00 00 00 00 fc ff df <80> > 3c 02 00 0f 85 92 00 00 00 48 8b 13 48 39 f2 75 66 49 8d 7c > RIP: __list_del_entry_valid+0x7e/0x170 lib/list_debug.c:51 RSP: ffff88003bdd6e50 > ---[ end trace 30e94b1eec4831c8 ]--- > Kernel panic - not syncing: Fatal exception The bug was caused by dev_release() failing to turn off its gadget_registered flag after unregistering the gadget driver. As a result, when a later user closed the device file before writing a valid set of descriptors, dev_release() thought the gadget had been registered and tried to unregister it, even though it had not been. This led to the NULL pointer dereference. The fix is simple: turn off the flag when the gadget is unregistered. Signed-off-by:
-
Corentin Labbe authored
commit d2f48f05 upstream. When plugging an USB webcam I see the following message: [106385.615559] xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [106390.583860] handle_tx_event: 913 callbacks suppressed With this patch applied, I get no more printing of this message. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
YD Tseng authored
commit b72eb843 upstream. xHCI host controllers can have both USB 3.1 and 3.0 extended speed protocol lists. If the USB3.1 speed is parsed first and 3.0 second then the minor revision supported will be overwritten by the 3.0 speeds and the USB3 roothub will only show support for USB 3.0 speeds. This was the case with a xhci controller with the supported protocol capability listed below. In xhci-mem.c, the USB 3.1 speed is parsed first, the min_rev of usb3_rhub is set as 0x10. And then USB 3.0 is parsed. However, the min_rev of usb3_rhub will be changed to 0x00. If USB 3.1 device is connected behind this host controller, the speed of USB 3.1 device just reports 5G speed using lsusb. 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 01 08 00 00 00 00 00 40 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 02 08 10 03 55 53 42 20 01 02 00 00 00 00 00 00 //USB 3.1 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 02 08 00 03 55 53 42 20 03 06 00 00 00 00 00 00 //USB 3.0 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 02 08 00 02 55 53 42 20 09 0E 19 00 00 00 00 00 //USB 2.0 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This patch fixes the issue by only owerwriting the minor revision if it is higher than the existing one. [reword commit message -Mathias] Signed-off-by:
YD Tseng <yd_tseng@asmedia.com.tw> Signed-off-by:
-
Dan Carpenter authored
commit 8128a31e upstream. c2port_device_register() never returns NULL, it uses error pointers. Link: http://lkml.kernel.org/r/20170412083321.GC3250@mwanda Fixes: 65131cd5 ("c2port: add c2port support for Eurotech Duramar 2150") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Rodolfo Giometti <giometti@linux.it> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dan Carpenter authored
commit 816c9311 upstream. This function only has one caller. Freeing "vdev" here leads to a use after free bug. There are several other error paths in this function but this is the only one which frees "vdev". It looks like the kfree() can be safely removed. Fixes: 61e9c905 ("misc: mic: Enable VOP host side functionality") Signed-off-by:
-
Kalle Valo authored
commit 1427228d upstream. This fixes the below crash when ath10k probe firmware fails, NAPI polling tries to access a rx ring resource which was never allocated. An easy way to reproduce this is easy to remove all the firmware files, load ath10k modules and ath10k will crash when calling 'rmmod ath10k_pci'. The fix is to call napi_enable() from ath10k_pci_hif_start() so that it matches with napi_disable() being called from ath10k_pci_hif_stop(). Big thanks to Mohammed Shafi Shajakhan who debugged this and provided first version of the fix. In this patch I just fix the actual problem in pci.c instead of having a workaround in core.c. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __ath10k_htt_rx_ring_fill_n+0x19/0x230 [ath10k_core] __ath10k_htt_rx_ring_fill_n+0x19/0x230 [ath10k_core] Call Trace: [<ffffffffa113ec62>] ath10k_htt_rx_msdu_buff_replenish+0x42/0x90 [ath10k_core] [<ffffffffa113f393>] ath10k_htt_txrx_compl_task+0x433/0x17d0 [ath10k_core] [<ffffffff8114406d>] ? __wake_up_common+0x4d/0x80 [<ffffffff811349ec>] ? cpu_load_update+0xdc/0x150 [<ffffffffa119301d>] ? ath10k_pci_read32+0xd/0x10 [ath10k_pci] [<ffffffffa1195b17>] ath10k_pci_napi_poll+0x47/0x110 [ath10k_pci] [<ffffffff817863af>] net_rx_action+0x20f/0x370 Reported-by:
Ben Greear <greearb@candelatech.com> Fixes: 3c97f5de ("ath10k: implement NAPI support") Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Chris Brandt authored
commit dd14a3e9 upstream. The timeout for BULK packets was 300ms which is a long time if other endpoints or devices are waiting for their turn. Changing it to 50ms greatly increased the overall performance for multi-endpoint devices. Fixes: 5d304358 ("usb: r8a66597-hcd: host controller driver for R8A6659") Signed-off-by:
Chris Brandt <chris.brandt@renesas.com> Signed-off-by:
-
Chris Brandt authored
commit 1f873d85 upstream. If multiple endpoints on a single device have pending IN URBs and one endpoint times out due to NAKs (perfectly legal), select a different endpoint URB to try. The existing code only checked to see another device address has pending URBs and ignores other IN endpoints on the current device address. This leads to endpoints never getting serviced if one endpoint is using NAK as a flow control method. Fixes: 5d304358 ("usb: r8a66597-hcd: host controller driver for R8A6659") Signed-off-by:
-
Johan Hovold authored
commit d81182ce upstream. Flag the first and only port as removable while also leaving the remaining bits (including the reserved bit zero) unset in accordance with the specifications: "Within a byte, if no port exists for a given location, the bit field representing the port characteristics shall be 0." Also add a comment marking the legacy PortPwrCtrlMask field. Fixes: 1cd8fd28 ("usb: gadget: dummy_hcd: add SuperSpeed support") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
-
Arnd Bergmann authored
commit 6830733d upstream. The driver uses a relatively large data structure on the stack, which showed up on my radar as we get a warning with the "latent entropy" GCC plugin: drivers/media/usb/pvrusb2/pvrusb2-eeprom.c:153:1: error: the frame size of 1376 bytes is larger than 1152 bytes [-Werror=frame-larger-than=] The warning is usually hidden as we raise the warning limit to 2048 when the plugin is enabled, but I'd like to lower that again in the future, and making this function smaller helps to do that without build regressions. Further analysis shows that putting an 'i2c_client' structure on the stack is not really supported, as the embedded 'struct device' is not initialized here, and we are only saved by the fact that the function that is called here does not use the pointer at all. Fixes: d855497e ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Johan Hovold authored
commit ec963b41 upstream. Fix up the root-hub descriptor to accommodate the variable-length DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as removable (and leaving the reserved bit zero unset). Also add a build-time constraint on VHCI_HC_PORTS which must never be greater than USB_MAXCHILDREN (but this was only enforced through a KConfig constant). This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is greater than seven (default is 8). Fixes: 04679b34 ("Staging: USB/IP: add client driver") Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by:
-
Anton Bondarenko authored
commit 1a744d2e upstream. Free memory allocated for address0_mutex if allocation of bandwidth_mutex failed. Fixes: feb26ac3 ("usb: core: hub: hub_port_init lock controller instead of bus") Signed-off-by:
Anton Bondarenko <anton.bondarenko.sama@gmail.com> Acked-by:
-
Johan Hovold authored
commit 93491ced upstream. Add define for the maximum number of ports on a SuperSpeed hub as per USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub descriptor. This specifically avoids benign attempts to update the DeviceRemovable mask for non-existing ports (should we get that far). Fixes: dbe79bbe ("USB 3.0 Hub Changes") Acked-by:
-
Yoshihiro Shimoda authored
commit 940f538a upstream. This controller disallows to change the PIPE until reading/writing a packet finishes. However. the previous code is not enough to hold the lock in some functions. So, this patch fixes it. Fixes: 746bfe63 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 067d6fdc upstream. This patch fixes an issue that this driver is possible to cause deadlock by double-spinclocked in renesas_usb3_stop_controller(). So, this patch removes spinlock API calling in renesas_usb3_stop(). (In other words, the previous code had a redundant lock.) Fixes: 746bfe63 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by:
-
Yoshihiro Shimoda authored
commit cdc87687 upstream. This patch fixes an issue that this driver is possible to access the registers before pm_runtime_get_sync() if a gadget driver is installed first. After that, oops happens on R-Car Gen3 environment. To avoid it, this patch changes the pm_runtime call timing from probe/remove to udc_start/udc_stop. Fixes: 746bfe63 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Signed-off-by:
-
Eli Cohen authored
commit de8d6e02 upstream. The logic was broken as it failed to update the response length for architectures with PAGE_SIZE larger than 4kB. As a result further extension of the ucontext response struct would fail. Fixes: d69e3bcf ('IB/mlx5: Mmap the HCA's core clock register to user-space') Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
commit 5ba5b437 upstream. We should be allocating enough information for a tiadc_device struct which is about 400 bytes but instead we allocate enough for a second iio_dev struct which is over 2000 bytes. Fixes: fea89e2d ("iio: adc: ti_am335x_adc: use variable names for sizeof() operator") Signed-off-by:
-
Matt Ranostay authored
commit 6272c0de upstream. According to the datasheet the RCO must be recalibrated on every power-on-reset. Also remove mutex locking in the calibration function since callers other than the probe function (which doesn't need it) will have a lock. Fixes: 24ddb0e4 ("iio: Add AS3935 lightning sensor support") Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Marcin Niestroj authored
commit 1b211d48 upstream. Datasheet of each device (lps331ap, lps25h, lps001wp, lps22hb) says that the pressure and temperature data is a 2's complement. I'm sending this the slow way, as negative pressures on these are pretty unusual and the nature of the fixing of multiple device introduction patches will make it hard to apply to older kernels - Jonathan. Fixes: 217494e5 ("iio:pressure: Add STMicroelectronics pressures driver") Fixes: 2f5effcb ("iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor") Fixes: 7885a8ce ("iio: pressure: st: Add support for new LPS001WP pressure sensor") Fixes: e039e2f5 ("iio:st_pressure:initial lps22hb sensor support") Signed-off-by:
Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Eva Rachel Retuya authored
commit cf6c7732 upstream. Standard deviation is calculated as the square root of the variance where variance is the mean of sample_sum and length. Correct the computation of statP->stddev in accordance to the proper calculation. Fixes: 3c97c08b ("staging: iio: add TAOS tsl2x7x driver") Reported-by:
Abhiram Balasubramanian <abhiram@cs.utah.edu> Signed-off-by:
Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 784047eb upstream. The "len" could be as low as -14 so we should check for negatives. Fixes: 9a7fe54d ("staging: r8188eu: Add source files for new driver - part 1") Signed-off-by:
-
